With my Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

with my Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Similar Messages

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

Im trying to restore my iphone 3gs to its factory setting at the same time updating to a newer version 6.1.2. while restoring, itunes states"We're sorry, we are unable to continue with your activition at this time." i cant open my phone, what does it mean

Im trying to restore my iphone 3gs to its factory setting at the same time updating to a newer version 6.1.2. while restoring, itunes states"We're sorry, we are unable to continue with your activition at this time." i cant open my phone, what does it mean

99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked.

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

New IPhone and Ipad air are ringing at the same time...

New IPhone and Ipad air are ringing at the same time, from incoming landline/mobile phones. Help please...

That's a new feature introduced in iOS 8 called Handoff. You can start something on your iPhone and finish it on your iPad or Mac. You can make the iPad stop ringing by going to Settings>FaceTime on the iPhone and toggling off iPhone Mobile Calls. You can do it on the iPad also.

Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
LabVIEW 2011

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My hus why cant I have two browsers open at the same time like i did with 3.6

My husband and I both use facebook. I used to be able to open one browser under his name then another under mine. Since i downloaded the new ff4 I can only get on one at a time and it signs me out of the other. How do I fix this!!!!!

You can look at one of these if you want to sign on with different identities at the same time.<br />
Use the "Firefox 4? Try Multifox 2 Beta 1!" link.
* Multifox: http://br.mozdev.org/multifox/

Two new external FW drives won't mount at the same time

Hi
I've just purchased two 250Gb external FW hard drives for my eMac. I already have a 60Gb external FW hard drive.
I also purchased a 6-port Belkin FW hub to hook them all up.
I've been having problems getting the three drives to mount simultaneously.
Initially I thought the problem was with the hub, or the FW cables, but the cables are fine, and if I take the hub out of the equation, and just try to mount two drives using the eMac's two FW ports, I still have problems.
Either of the two new 250Gb drives will mount fine with the old 60Gb drive, but if I try to mount the two 250Gb drives simultaneously, only one will mount (which ever I plugged in first).
The only way to get both 250Gb drives mounted at the same time is to use FW for one and USB for the other (way too slow).
The 250Gb drives are Hitachi Deskstars in enclosures with the Oxford chipset.
I've searched the internet for answers, but haven't found much, except, maybe, for this comment:
'While this cannot solve all FireWire issues, I've spent a lot of time debugging multiple FireWire enclosures on the same computer. Apparently there is a unique hardware ID (similar to a MAC address in an Ethernet card) that some manufacturers are not making unique. Any time you have two or more drives with the same ID, you'll have problems.'
Any ideas?
Thank you.

FWIW, I've tried to mount both drives on a friend's iBook, and the problem remains the same: it's one drive, or the other - both drives will not mount simultaneously.
I updated to 10.3.9, but that hasn't fixed anything.
Any ideas?

My newer IPhone gets a weaker cell signal at the same time and place as my wife's older one. Help

My newer IPhone gets a weaker cell phone signal at the same time and place as my wife's older IPhone. Help!

What is the signal the difference?
Follow this guide and record the numbers you see...
http://lifehacker.com/5929546/see-the-actual-signal-strength-on-your-iphone-with -this-quick-tweak
If the difference is within ~10db there's not much to worry about.
Now if you see -130 and -80 that is an issue. (talk to your carrier)
But if you see -60 and -75, both phones are operating normally.
What are the iPhones in question?
Are you both on the same network? (what network(s) are you on?)
What data connection is available on each phone? (3G/4G/LTE)
Are the iOS and Carrier settings up-to-date?

My facetimeicon is exist on notifcation center only and i cannot use it at the same time iam having problem with activiting imessage on my iphone

Hi guy . My facetime exists in notification center only and there is no icon for facetime in the setting pane to activate it after i update to ios7.0.4. At the same time my imessage is taking long time to be activated . Any body can help me plz.

Hi thanks my imessage worked but it is using my email and not my number . In the imessage my iphone number in imessage is not exisiting .what i have there my email and the imessage of my second number on iphone 4 even though when i open apple id on my apple id my number is there

New computer & going from PE7 to 8 at the same time, how do I move

Here's the situation
     Old computer - XP, running Photoshop Elements 7
                         - All pictures are on an external hard drive (drive letter I:)
                         - 2 catalogs - MyCatalog, Tess's Catalog --- each have a couple thousand pictures, they've been tagged, organized, etc.
     New Computer - Windows 7, running Photoshop Elements 8
                         - disconnected the external picture hard drive from the old computer and attached it to the new computer (now drive letter E:)
What steps do I need to follow to get the new computer to recognize the 2 catalogs that were previously created on the old computer?
Thanks,
Tess

On the old computer, in the PSE Organizer (probably need the drive with the photos attached), select File->Backup Catalog. Create backups, one for each catalog.
On the new computer, in the PSE Organizer (probably need the drive with the photos attached), select File->Restore Catalog. Point it to the backups you made.

Starting multiple queries in different modules at the same time

Hi @ all,
i´ve built a forms mdi application with forms 10g (10.1.2.3).
When I open a form (from the menu form) and start a database query the whole mdi application is blocked until the query finishes.
Is there a way to avoid blocking the whole application so that i am able to start another form and do some work while the other running module is still querying (Maybe starting each module in its own (java) thread).
Thank you,
Thomas

Non-blocking cannot be set programatically. Plus, it only gives you the option to cancel the query, not open another form. From the Help:
Interaction Mode property
Specifies the interaction mode for the form module. Interaction mode dictates how a user can interact with a form during a query. If Interaction Mode is set to Blocking, then users are prevented from resizing or otherwise interacting with the form until the records for a query are fetched from the database. If set to Non-Blocking, then end users can interact with the form while records are being fetched.
Non-blocking interaction mode is useful if you expect the query will be time-consuming and you want the user to be able to interrupt or cancel the query. In this mode, the Forms runtime will display a dialog that allows the user to cancel the query.
You cannot set the interaction mode programmatically, however, you can obtain the interaction mode programmatically using the GET_FORM_PROPERTY built-in.

Can I connect more than one iCloud account at the same time to share contacts with s.o.

Is it possible to use/connect 2 or more iCloud accounts with my iOs device in order to share my contacts with somebody (Account 1) and still have another addressbook for contacts that should not be shared (account 2)?
The other person should be able to connect to Account 1 too.

No, you can only connect to one iCloud account.

Trouble transferring email to Outlook for Mac 2011

I purchased a new iMac and Office for Mac 2011. I have years of Outlook email history to transfer over, which the folks at the Apple Store said would work, no problem. That hasn't been the case. None of my .pst files from Outlook (2003, for PC) will transfer correctly. It seems that about half the email is missing. Have tried importing just small pst files with less than 100 emails, that won't work either. I've seen this problem discussed on multiple forums, but haven't seen a consensus developing as to the solution. I've tried creating a new identity in Office for Mac 2011, importing there, exporting to a .olm file, and reimporting to my main identity, and that didn't work either. Each solution has thousands of missing emails, but never the same ones. I can find no pattern, relating to whether there were attachments, older emails, new emails, etc.
I know this is being discussed in various forums, but I'd like to ask whether anyone has any new ideas? Or, it would be great to know if ANYONE has successfully been able to complete this kind of transfer to Outlook for Mac 2011, or whether it's happening to everyone who tries.
Thanks...

We've had problems importing Outlook 2003 and earlier >PST files into Outlook 2011 due I think to the ANSI format of the PST file.
One option is to get a 30 day trial of Outlook 2010 for your PC, create a new PST file in 2010 and import your 2003 PST into it. Then the PST will be Unicode and Mac Outlook 2011 should be able to import this PST.
Mike

Sync with both Mac os 10.4 AND Windows XP at the same time?

After much research AND much frustration with my Moto Q... I have decided on a Palm Centro (the prodical is returning home --- i used to use Palm all the time)
Here is my one question... I use Outlook on my computer at work (XP - office suite) and I can use Palm Desktop (or iCal) on my Mac at home (10.4)
Is it possible to setup the palm to sync with outlook at work and either iCal or Palm Desktop at home so that the same calendar, tasks, contacts, are on work comp, home comp and Centro at the same time? will i make something blow up? I am just trying to get prepped for when I am able to get the centro (8 days and counting).
If nothing else... I haven't been syncing to the Mac at home with the Moto Q and so I am really not 'out' anything... just wanted to know if it could be done?
anyone out there doing this?
Post relates to: Centro (Verizon)

yeah... i was thinking Cabled sync. I just want to be able to make changes at work on outlook, sync them with my centro, take my centro home, and sync it with my mac (using palm desktop OR iCal -- suggestions?!) and have the information the same in both places!
I am wondering if the centro, unlike my iPod, will allow me to sync in two places (not at the same time) and possibly even with different software (outlook and palm)
Thanks!
Post relates to: Centro (Verizon)

With my Os X 10.7.5 , I updated outlook for mac, it took a while, kept wanting me to close microsoft database Daemon,finally managed to upgrade to outlook 14.3.2, after new start is EVERTYTHING in outlook Gone. At the same time updated our laptop, with n

Similar Messages

Maybe you are looking for