With out EC-CS, can i do consolidation
Hi Friends,
With out EC-CS, can i do consolidation ?
I heard it is possible with consolidation business area, but i havent worked on that.
I need little clarity friends.
Your early reply is appreciated.
Thanks & Regards,
neela
Edited by: neela on Jun 24, 2010 4:58 PM
Dear Neela,
yes, with EC-CS you can do 1 company consolidation, 2 business area consolidation and 3 profit center consolidation.
There are competitive consolidation products inside SAP, for example FIN-SEM-BCS, the BPC (the ex Outlook Soft product) and the BIP or BFR (the ex Carthesis Magnitude).
Ciao,
David
Similar Messages
-
With out deleting request can we reconstruct
Hi,
can any one tell me With out deleting request can we reconstruct the request.Hi,
loads that come through PSA move to reconstruction tab after deletion so that it can be edited in PSA and loaded again. This is mostly done for delta requests to make sure that we do not loose data in any case.
There would be no point in reconstructing the load which is already there in the target guess you cant do it rather.
Thanks
Puneet -
With out inbound Idoc can we post the data using we19
Hi,
with out inbound idoc can we post the data using we 19.........
for testing any idoc type particular to inbound FM is posting application data..in TABLES.....
Regards,
Raghunadh.HI Raghunadh Babu
The main purpose of given WE19 Transaction by SAP... To generate test IDoc and check whether the data is posting according to business requirement....
Answer for your question.....Yes U can generate IDoc...
Enjoy playing with we19...
RR -
US iPhone 3GS with out contract. Can you use it on any network
Hi there,
does anyone know if you buy an iPhone 3GS in the US with out a contract, for the full price, if it is unlocked or you have to use it with ATT?
Thank you
GGAll iphones sold in the US are carrier locked to AT&T with no way to unlock them as AT&T does not unlock iphones for anyone for any reason. Thus, an iphone purchased in the US can only be activated and used on the AT&T network. It will not work with any other carriers sim. Without contract means just that, no two year agreement. That has nothing to do with whether the phone is locked or unlocked.
-
After one month or more with out .mac working, can we get our money back?
It has been over one moth with out iweb working properly, I dont care of getting back the money of iLife, but yes to the money I am paing for my .mac account since It has been over one month that is not working and the only reason I have it is for my personal web site that is my work portal, everithing I do (Photography & Film) has to do with interactive web page, so Has been more than a month that I can't give my clients what they pay for and is really bad apple is not doing a thing.
Ye s we have read a lot of postings that the problem is being fix as we think, but really that has been the case since a little bit more than 15 days and as today we have not seen a think fixed, still iWeb don't publish and we have tried everithing apple and users told us and still not a single good renponse.
iWeb 2.0.2 was the worst upgrade from an apple software ever, can we get our .mac accounts money back so we can go to a better service?
Sincerely, Adolfo Pardo: (www.cinematograf.comActually when my account expires on April 18 2008 I am not renewing, any more If I don't get my money back soon I will cancel then my account and move to a more stable company, probably rapidwever or to a host way more stable yahoo or someone who hears the customers and has 24/7 service for errors on their system.
-
With out portal server can we enable mobile mail?
for example i using only messaging server,is it possible to enable mobile mail?
if iam using portal ,i can use MAP to enable mobile mail,but with out using portal how can i enable mobile mail?
plz give me the sugg.
thanxIf you're using a fully-capable web browser, why would you need a gateway? Just hit the webmail url, and you're done.
If you would rather use a "fat" client, Messaging is fully capable of responding to any client that talks IMAP or POP. No gateway needed. -
PURCHASE ORDER WITH OUT BAPI_PO_CREATE CAN WE CREATE?
PURCHASE ORDER WITH OUT calling BAPI_PO_CREATE CAN WE CREATE?
Don't Post your question with all Caps. Follow the Rules of Engagement
Edited by: Vijay Babu Dudla on Apr 23, 2009 1:46 AM[Create Purchase order with program|can we create purchase order through report programming?]
Plz be clear about your requirement instead of posting questions like these.
Don't violate forum rules with Duplicate posts -
Can we do a interface With out assigning the TS and BS to the SWC
Hi,
With out assigning the Technical system and Business system to the particular software component.. can we do the Scenario..
my Scenario is the File to RFC... for this... the Receiver system ( SAP- R/3 ) is need to maintain entry in SLD.. or with out that also can we do the scenario..
Because with out maintaining an entry in the SLD.. under a new software component i have created a scenario... it is working fine.. then why we need to assign the Technical system and Business system to all the SWC 's...
Please clear my doubt
Thanks
JainHey Raj
Even help.sap says we need to use Business system for RFC
For Sender RFC
The communication channel in which the RFC adapter is defined must be defined for a service of type Business System in the area Service Without Party. In the PCK, you must create an empty party record.
For Receiver RFC
The communication channel in which the RFC adapter is defined must be defined for a service of type Business System in the area Service Without Party. In the PCK you must create an empty party record.
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/frameset.htm
You need to mention Gateway Host and gateway service in SM59 for RFC communication,there you need business system.
Thanx
Aamir -
How can i buy iphone5 with out contarct PLEASE,,...
theres people that are buying iphone 5 with out contract..can some one please help me how i can do that..??PLZ
The Online store in the USA does not YET have the OFF CONTRACT and unlocked price option for the iPhone5
Through it is expected to be about $599.00 plus taxes.
You may have to call your nearest Apple Store or
Call 1-800-MY-APPLE
For full details. -
How do you transfer songs to a new iPod with out a computer
Been thinking on getting a new iPod but I don't know how to transfer songs from one to the other with out a computer
You can redownload iTunes purchases directly to the iPod by the followong for newer iPods
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Group by sum doesn't work with outer join. Can anyone please help me to get it right?
I've posted some sample data and queries below:
CREATE TABLE COMPLAINT
CNO NUMBER,
REASON VARCHAR2(15 BYTE),
TOTAL NUMBER
Insert into COMPLAINT
(CNO, REASON, TOTAL)
Values
(1, 'edge', 250);
Insert into COMPLAINT
(CNO, REASON, TOTAL)
Values
(2, 'edge', 250);
Insert into COMPLAINT
(CNO, REASON, TOTAL)
Values
(3, 'brst', 300);
Insert into COMPLAINT
(CNO, REASON, TOTAL)
Values
(4, 'crea', 400);
COMMIT;
CREATE TABLE SCOTT.COMPLAINTROLL
CNO NUMBER,
ROLL VARCHAR2(15 BYTE)
SET DEFINE OFF;
Insert into COMPLAINTROLL
(CNO, ROLL)
Values
(2, 'roll22');
Insert into COMPLAINTROLL
(CNO, ROLL)
Values
(1, 'roll4');
Insert into COMPLAINTROLL
(CNO, ROLL)
Values
(1, 'roll3');
Insert into COMPLAINTROLL
(CNO, ROLL)
Values
(1, 'roll2');
Insert into COMPLAINTROLL
(CNO, ROLL)
Values
(1, 'roll1');
COMMIT;
select * from complaint
CNO REASON TOTAL
1 edge 250
2 edge 250
3 brst 300
4 crea 400
select * from complaintroll
CNO ROLL
1 roll1
1 roll2
1 roll3
1 roll4
2 roll22
-- total of reason code edge is 500
select reason,sum(total)
from complaint c
group by reason
REASON SUM(TOTAL)
brst 300
crea 400
edge 500
-- total of reason code edge after outer join is 1250
select reason,sum(total)
from complaint c,complaintroll cr
where c.cno=cr.cno(+)
group by reason
REASON SUM(TOTAL)
brst 300
crea 400
edge 1250
{\code}
Thanks for reading this post.The problem that you described is simple. The outer join duplicates all the rows from the parent table (complaint). If you want to sum a column from the parent table, then this sum includes all the duplicated rows.
There are several solutions for this problem.
A) One had been shown already by Cenutil. Instead of doing an outer join, you can do a subquery in the select clause that delivers the additional information from the detail table.
SQL> select reason,
sum(total),
sum((select count(*) from complaintroll cr where c.cno=cr.cno)) cnt_rolls
from complaint c
group by c.reason;
REASON SUM(TOTAL) CNT_ROLLS
crea 400 0
brst 300 0
edge 500 5b) sum in two steps. First sum and count including the join criteria, then use this information to calculate the correct total sum.
SQL> select reason, sum(stotal), sum(stotal/scount), sum(scount), sum(cnt_rolls)
2 from (select reason, sum(total) stotal, count(*) scount, count(cr.cno) cnt_rolls
3 from complaint c
4 left join complaintroll cr on c.cno=cr.cno
5 group by reason, c.cno
6 )
7 group by reason;
REASON SUM(STOTAL) SUM(STOTAL/SCOUNT) SUM(SCOUNT) SUM(CNT_ROLLS)
crea 400 400 1 0
brst 300 300 1 0
edge 1250 500 5 5
sql> c) another option is to do the left join, but do the aggregation only one time for the parent table. Analytic functions are helpful for that. However since analytic fuinctions can't be used inside an aggregation function, we would again need an inline view.
SQL> select reason, sum(case when rn = 1 then total end) sum_total, count(*), count(crcno)
2 from (select row_number() over (partition by c.reason order by c.cno) rn,
3 c.*, cr.cno crcno
4 from complaint c
5 left join complaintroll cr on c.cno=cr.cno
6 )
7 group by reason;
REASON SUM_TOTAL COUNT(*) COUNT(CRCNO)
brst 300 1 0
crea 400 1 0
edge 250 5 5
SQL> Edited by: Sven W. on Feb 10, 2011 1:00 PM - formatting + column added to 2nd option -
With Out Derivation in Char relationship
Hi,
I am trying to understand the concept of char relationship with derivation and without derivation. I would request you to please tell me the basic difference between with and with out derivation?
we can say that, with derivation is used to derive certain values based on a relationship. So what exactly with out derivation does in input ready query and automatic planning scenarios?
Please give me an example to use with out derivation. I have read the help document, but it is not clear.
Regards
SreekanthHi Diogo,
So according to your explanation: the conclusion is : both with derivation and without derivation checks valid combinations.
with derivation - apart from checking combination - it also derives the value. In this case,
if the target char is not in the aggregation level/query, then the target value is derived according to master valid combination.
if the target char is also in the aggregation level, then it only checks the valid combinations, it does not derive any thing.
With out derivation - it can't derive any char. it only checks the valid combination. both chars need to be in the aggregation level.
is this correct? -
I am doing one scenario, BC to XI to RFC(R/3 system), Business Connector(BC)vendor say they can't provide the RFC to XI guys,but they going to prodive the mapping fields (like excel file..), with out impoting RFC can I do the Integration Repository mapping Stuff if I know the mapping data fields.
Hi Vasu,
you can create your source data type in XI in IR if you know the structure of the source message.
Thanks,
Rajeev Gupta -
HT2731 i want to creat an account with out cridit card but the opption of noon is not in page
sorry because my english is week but i well tri my best u understand my problem . i complate my all detta and i want to creat my account with out card what can i do
There are instructions on this page for creating a new account without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it
-
Shipping status tracking in B2B with out XSI
Hi Gurus,
We are implementing the the standard B2b application with ECC6.0 as the backend.
We are not using XSI fuctionality in ECC to get the information of the shipping status.
But they still get the the tracking number (VL02n) in to the ECC. Now We need to get this Information Into B2B shop for status tracking.
Do we need to XSI to be enabled to bring the tracking Information into B2B?
How can we do this with out XSI?
Can we still use the tables TCAURL , TCAVAR with out creating the Express Delivery companny.
If this need total customization can some one run me through the steps on how we can achive this.
Thank You.Hi,
When you tracking number, I hope you mean the Airway Bill Number or Bill of Lading that is seen in transaction "Edit Delivery" vl02n.
The display of the delivery number is a standard feature of the B2B Webshop. This will be displayed at the item level.
However, the bill of lading to be displayed is not standard. There is development required in both, ABAP and JAVA (ISA) level.
We had implemented this in CRM ISA, so we had to use a Custom FM (RFC) by using a standard BAPI to return the Airway Bill Number when it was provided the delivery number as the input.
Further, the JAVA web page that displays the order status has to be modified to call your custom RFC.
This is the basic path for the solution.
Regards,
Nelson.
Maybe you are looking for
-
I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a f
-
IPOD OK in Windows, Diagnostics in iTunes can see it, but it's not listed.
Hello, I have a 5th Gen iPOD and use iTunes V8.1.0.52 (latest) in Windows Vista on a PC. When I connect the iPod to the PC, Windows recognised it as disk F, and iTunes starts up automatically. However, the device does not appear in the iTunes Source
-
ISE v1.1 NAD 6500 failed to decrypt Key......
Hello everyone , I´ve implemented 2 Cisco ISE v1.1 in HA to run MAB and 802.x Authentication / Authorization. Using Local ISE DB and Active Directory as an External Identity Source for wireless and wired users and devices. This was working fine 2 wee
-
Non priviledged commands fail after patch cluster install
For several years, to allow users to access system functions for higher clock resolutions in their applications, we have made the following mods to two files (per Sun recommendations): In the /etc/system file, add lines: * 10 ms clock resolution* set
-
What is best ebook reader to use alonside a mac?
Hi Thinking of getting an ebook reader, like the Sony Reader or the like but dont know which one to get that will work well with my mac. The connect software that comes with the reader is only suitable with windows. I think I can use the general feat