With out inbound Idoc can we post the data using we19

Hi,
        with out inbound idoc can we post the data using we 19.........
for testing any idoc type particular to inbound FM is posting application data..in TABLES.....
Regards,
Raghunadh.

HI Raghunadh Babu 
The main purpose of given WE19 Transaction by SAP... To generate test IDoc and check whether the data is posting according to business requirement....
Answer for your question.....Yes U can generate IDoc...
Enjoy playing with we19...
RR

Similar Messages

  • Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

    Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
    Appreciate any quick response around this.

    Hi,
    Transaction date  will be your autoinvoice master program submission level date (If you haven't setup any logic.
    Please check the program level default date, if user enter old date ststem will pick the same.
    Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
    CAUSE
    Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
    SOLUTION
    1.Ensure that there are no scheduled workflow background process run.
    2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines"  at Responsibility level only as Yes.
    3.Now switch the responsibility to which the profile is set.
    4.Create order for Non-Shippable Lines and progress it to invoicing.
    5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
    6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

  • Inbound idoc fdccp02 to populate the data into segments

    hello,
    can anybody send me sample data populating to inbound idoc fidccp02.
    thanks
    Anant

    check the below test data that I've used in my project.
    E1FIKPF
    BUKRS     1000
    BLART     DT
    BLDAT     20080908
    BUDAT     20080908
    WWERT     20080908
    BKTXT     2205/033/01W
    WAERS     GBP
    GLVOR     RFBU
    E1FISEG
    BUZEI     001
    BSCHL     01
    KOART     D
    SHKZG     S
    WRBTR     280.00
    SGTXT     Q8/Pace
    E1FINBU
    KUNNR     KU0002
    E1FISEG
    BUZEI     002
    BSCHL     50
    KOART     S
    SHKZG     H
    MWSKZ     A0
    WRBTR     280.00
    SGTXT     Effluent Charge
    KOSTL     L6111
    HKONT     0000321030
    PRCTR     L6111
    PRCTR     L6111

  • With out deleting request can we reconstruct

    Hi,
    can any one tell me With out deleting request can we reconstruct the request.

    Hi,
    loads that come through PSA move to reconstruction tab after deletion so that it can be edited in PSA and loaded again. This is mostly done for delta requests to make sure that we do not loose data in any case.
    There would be no point in reconstructing the load which is already there in the target guess you cant do it rather.
    Thanks
    Puneet

  • Outbound function module to post the data in to WMMBID02 IDOC

    Hi Experts,
    I am using standerd idoc WMMB1D02 to post the goods recipt data.
    I am using the outbound idoc , how to post the data in to idoc using FM or BAPI ?.
    please help me on this.
    Thanks,
    Venkat.

    Hi Hakim ,
    Thanks for tour replay , we are using the standerd message type and standerd idoc are WMMBXY,
    WMMBID02. I did't notice any standerd  FM or BAPI which will create the outbound idoc for the same.
    please help me on this.
    Thanks,
    Venkat.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • How can we find the Idoc number which posts the material document in SAP

    Hi All,
    How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
    Thanks
    Chandru

    Hi,
    In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
    regards
    suresh

  • Problem with HR inbound IDoc

    Hi,
    I have a problem with processing inbound IDocs from an external payroll system to infotype 0008.  The process is quite simple; salary changes from the payroll system is recorded to the corresponding employee's infotype 0008.  When testing I noticed that that the new record is recorded as is.  For example if there is already an existing record with the validity dates 01.01.2010 - 31.12.9999 and the new record in the IDoc is 01.01.2011 - 31.12.9999, the new record is written as is.  I would expect the system to delimit the old record correctly - similar to what would happen if you maintain records online.  There is no error checking or any kind of processing done by the system. 
    I did some debugging and found out that the function module linked to process code HRMD writes the information directly to the database.  If this is a standard way of doing this, it is really unusual.
    Has anybody else encountered this?  Any pointers?
    Thanks.
    Edited by: Theo Droste on Jan 20, 2011 11:56 AM

    Hi
    This is correct, the ale programme writes the data directly to the database, I have faced this isssue on occassion. I once raised an oss message on this as well, and sap confirms this is what happens. If it is a sap to sap ale, it somehow seems to work, - this could be because the outgoing idocs are created by sap itself  but if it is a non sap to sap ale the onus is on us to ensure that the external system sends the correct data to sap in the way we intend it to be displayed.
    that is how it has been in my experience. It is unusual, but apparently not impossible. Please let us know if you find out anything different.

  • Inbound Idoc type for posting Non-PO Invoice

    Hi,
    I am looking for an inbound Idoc type to post Non-PO Invoice.  The Idoc types INVOIC01 and INVOIC02 helps me to post the invoice with reference to PO.  But I am looking for the Idoc type to post the invoices without reference to PO i.e., For example to post the transaction FB60 (Enter vendor invoice without ref to purchase order).
    with regards,
    suresh

    Hello Deep,
    I know it might be quite late for you for this answer, nevertheless I will write that, because there are lots of question like yours. bapi_incominginvoice_park is also a suitable bapi for you. All you need to do is call it this way:
    data: headerdata like bapi_incinv_create_header value is initial,
            table_item type table of bapi_incinv_create_item,
            gl_account like bapi_incinv_create_gl_account,
            table_gl type table of bapi_incinv_create_gl_account.
    * fill headerdata and table_gl, leaving table_item empty
    CALL FUNCTION 'BAPI_INCOMINGINVOICE_PARK'
        EXPORTING
          HEADERDATA                = HEADERDATA
    *   ADDRESSDATA               =
        IMPORTING
          INVOICEDOCNUMBER          = lv_docnr
          FISCALYEAR                = lv_year
        TABLES
          ITEMDATA                  = table_item
    *      ACCOUNTINGDATA            = table_acc
          GLACCOUNTDATA             = table_gl
    *   MATERIALDATA              =
    *      TAXDATA                   = table_tax
    *   WITHTAXDATA               =
    *   VENDORITEMSPLITDATA       =
          RETURN                    = lt_return.
    This works perfectly for me, creating a mir7 document without refering to a PO. The trick here is to fulfill the glaccountingdata importing table while leaving itemdata empty.

  • Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

    Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

    My bad?
    You're original response was questions/post  about an iMac. Now you've edited it to ask about a Mac Pro?
    You can more easily add internal drives in a Mac Pro.
    Not too terribly easy to add/replace drives in an iMac.
    If younhave questions about a Mac Pro, try posting in the Mac Pro forums.
    Much more knowledgeable users there.

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • I can't change any information for any songs in my library, everything is just greyed out.  How can I get the ability to edit my song information?

    I can't change any information for any songs in my library, everything is just greyed out.  How can I get the ability to edit my song information?

    I found one other way to do it.  I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
    Thanks for your help, Matt!

  • With out EC-CS, can i do consolidation

    Hi Friends,
    With out EC-CS, can i do consolidation ?
    I heard it is possible with consolidation business area, but i havent worked on that.
    I need little clarity friends.
    Your early reply is appreciated.
    Thanks & Regards,
    neela
    Edited by: neela on Jun 24, 2010 4:58 PM

    Dear Neela,
    yes, with EC-CS you can do 1 company consolidation, 2 business area consolidation and 3 profit center consolidation.
    There are competitive consolidation products inside SAP, for example FIN-SEM-BCS, the BPC (the ex Outlook Soft product) and the BIP or BFR (the ex Carthesis Magnitude).
    Ciao,
    David

  • HT1349 i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

    i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

    i had 4 point something i dont know lol but i used to text anyways with my wifi on "textfree app" until i updated like a dummy i didnt know they would ask for the sim card and my day got ruined . all  i wanted to know is if i put a sim card like if i buy a at&t card for 4$ on amazon if it would unlock it and i can use it again for i can play angry birds -_-  but u kinda made my day better thanks

Maybe you are looking for

  • How do I setup a Samsung CLP300 color laser printer

    I got this from a friend at work. I am running Tiger on my mac. I plan to update to Leopard soon, so I hope I can use this printer with either OS version. I got it home and hooked it up to one of my macs. It comes up with the name "Adobe PDF 8.0". Wh

  • Flex 3 in a Week vs. Flex 4 in a Week

    Comparing Flex 3 in a week and Flex 4 in a week video tutorials is easy to verify that some important subjects were left out, while another important where introduced. Bellow there are a list of some important subjects of Flex 3 tutorial left out in

  • How do i get my old hompage back?

    My old homepage had 9 boxes in it which showed my most visited/recent websites i visited.I don't know how to get it back as there is no link for it.

  • Hi, i need some simple help please

    Below is the current code for display and counting values in a table... boolean learningstyle = false; String lstyleresult = ""; RS=Stmt.executeQuery("select data from learningstyle where userid='"+sr_studentid+"' order by submitted desc,id desc");  

  • Search by date range

    This should be simple but I cannot get it to work. Trying to construct a page where the user enters a start date & an end date & we display results. I am using : SELECT * FROM AVRmonth WHERE ExpiryDate BETWEEN #varStart# AND #varEnd# In the Variables