With out RAMN can we copy dadafiles

Hi All
Can you do datafile movement without rman our database is not in archivelog mode

984118 wrote:
database is in no archive log mode, to useing rman database is in must be in archive log mode so that we can do offline database
there is no way to do? database version is 10g r1 and all database backup done through third party tool and client not using rman to backup
ThanksYou can use RMAN to copy files when the database is mounted no problem. Archive log mode is not relevant. Or if you want to minimise the down time, while the database is open take a tablespace offline, copy its datafiles, and bring it online. Then repeat for the next tablespace. Of course, you will have to close the database to move your system and undo tablespaces.
And I should point out that if your database is on ASM, I am certain that your third party tool is using RMAN. If it doesn't, I would not think it a valid backup.
John Watson
Oracle Certified Master DBA
http://skillbuilders.com

Similar Messages

I have a new ipad2 with out 3G, can I use my iPhone to teather to my iPad to get Internet?

I have a new ipad2 with out 3G, can I use my iPhone to teather to my iPad to get Internet?

If your carrier supports tethering with the iPhone and you have a tethering plan for your iPhone with your carrier, yes - via the iPhone's personal hotspot feature.
http://support.apple.com/kb/HT4517

Why a pdf document with embedded fonts can be copied but is not searchable in pdf reader

I am writing a pdf files with embedded subset fonts. As required, I am including the ToUnicode and CIDSet objects. To test, I created a simple PDF with two Hebrew characters. I can select the two characters and copy to the clipboard, and paste it properly into another application such as Word. But I am not able to search for a word containing these two characters. Adobe Reader (or Acrobat) displays the message that the word was not found. So in essence, I have created a PDF document which can be copied properly, but is not searchable. Any idea what I might be missing when creating the document?
Additional information: 1. The file in question is a minimal file with just two characters. I have tested with many such files in many different languages including English. None of the files are searchable. 2. Curiously, if I search for the letter 'e', Adobe reader highlights an incorrect word, even if the letter 'e' does not exists in the file. 3. Adobe acrobat is also not able to search within this file, however when I save the file to another disk file, the saved file now is searchable. I confirmed that the major objects such as the font-file, ToUnicode object, CID object, and the font description objects are the same in the saved file. However, one of the font object is brought up closer to the top of the file. 4. FoxIt is able to search these files properly.
5 0 obj
<</Filter /FlateDecode /Length 115>>
stream
        q 0.750000 0 0 0.750000 0.000000 792.000000 cm
        q q q 0.160000 0.000000 0.000000 0.160000 0.000000 0.000000 cm
        BT /F0 100.000000 Tf 0 g 750.000000 -690 Td[<02B0>] TJ 35.000000 0 Td[<02B9>] TJ ET Q
        Q
        Q
        Q
endstream
endobj
10 0 obj
<</FontName/AAAAAA+ArialUnicode/CIDSet 9 0 R /Ascent 905/CapHeight 905/Descent -212/FontFamily(Arial)/Flags 32/FontBBox [0 -212 1000 905]/ItalicAngle 0/StemV 0/FontFile2 7 0 R/Type/FontDescriptor>>
endobj
11 0 obj
<</BaseFont/AAAAAA+ArialUnicode/CIDToGIDMap/Identity/CIDSystemInfo <</Ordering(Identity)/Registry(Adobe) /Supplement 0>> /FontDescriptor 10 0 R/Subtype/CIDFontType2/Type/Font>>
endobj
12 0 obj
<</Subtype/Type0/BaseFont/AAAAAA+ArialUnicode/Encoding/Identity-H/DescendantFonts [11 0 R]/ToUnicode 8 0 R/Type/Font>>
endobj
8 0 obj
<</Filter /FlateDecode /Length 252>>
stream
        /CIDInit /ProcSet findresource begin
        12 dict begin
        begincmap
        /CIDSystemInfo
        << /Registry (Adobe)
        /Ordering (UCS) /Supplement 0 >> def
        /CMapName /Adobe-Identity-UCS def
        /CMapType 2 def
        1 begincodespacerange
        <0000> <FFFF>
        endcodespacerange
        3 beginbfchar
        <0000> <0000>
        <02B0> <05E0>
        <02B9> <05E9>
        endbfchar
        endcmap
        CMapName currentdict /CMap defineresource pop
        end
        end
endstream
endobj

I figured the app might have that ability - considering you can add text, highlight, add a signature, annotate and draw - so my thought was why not delete a page, or rearrange for that matter?.. That should be an option, this way we don't have to export to one of the other apps to delete or rearrange..
Thanks for the help, Bernd.
BTW if anyone is looking - PDF Max can do all of the above and delete and rearrange. With PDF Splicer you can delete and rearrange as well, but it has no other features.
And as for Steve Werner whose comment was deleted after it got to my inbox, it is much more than a Reader, as you can plainly see from the amount of tasks the Reader app can do above.

PURCHASE ORDER WITH OUT BAPI_PO_CREATE CAN WE CREATE?

PURCHASE ORDER WITH OUT calling BAPI_PO_CREATE CAN WE CREATE?
Don't Post your question with all Caps. Follow the Rules of Engagement
Edited by: Vijay Babu Dudla on Apr 23, 2009 1:46 AM

[Create Purchase order with program|can we create purchase order through report programming?]
Plz be clear about your requirement instead of posting questions like these.
Don't violate forum rules with Duplicate posts

Can't copy any file to/from iomega 1TB home media network CE other than through FTP

Hi, since few days ago I can't copy any file to or from iomega using Windows Explorer on my PC or any file explorer ony my android phone. I can acces the drive but when I try to copy something to the drive, a 'copying' window pops up and shows "estimating" in ETA and often freezes. Same goes with my phone, it just shows 0B/s as speed. I can however copy files to/from using ftp connection. Do you have any ideas what's wrong? I didn't change anything, it just stopped working. Also, will factory reset delete all data from the drive? EDIT. Turns out I can only copy FROM the drive using ftp. So at this point there is no way for me to move anything to the nas.

Hello naat1,
With the majority of support incidents I have dealt with, odd behavior like this can usually be attributed to a failing drive.
The firmware runs on the drive, so, if it is beginning to fail it can cause unexpected behavior.
I would backup anything from the NAS that you wish to keep, then run the factory reset (it is data destructive), and then try to re-load the NAS.

Process order creation with out BOM

Hi
I have an requirement...
material A is finished good
i create process order for material A
but i dont use BOM... with out BOM can i create process order .
after creating process order cani isuue components against order ? is it possible please can any one help me in this issue
but one condition : i craet process order material A 10 KG
for this FG i used components materia A used 8 kg and material B used 2 kg
is it possibel pls..could any one gude me in this issue
Regards
Sesi

material A is finished good
i create process order for material A
but i dont use BOM... with out BOM can i create process order .
yes, You can create a orderwith out BOM
after creating process order cani isuue components against order ? is it possible please can any one help me in this issue
Yes, You can assign component manually in component overview screen or you can issue material directly for order with 261 movement, It will go to unplanned consumption
but one condition : i craet process order material A 10 KG*
for this FG i used components materia A used 8 kg and material B used 2 kg
In The component overview screen of process order assign the Material A with 8 kg ,
& material B as 2 KG
Regards,
Sundaresan
Edited by: Sundaresan . E. V on Oct 4, 2010 2:41 PM

HT2534 i need to create an apple id with out card

i need to create an apple id with out card can u give any suggestions..............for me

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Can I copy 10.4.2. DVD to external drive?

I buy the new OS but didn't believe they would sell it wothout a CD version.
On a system with a DVD, can I copy the installation DVD to an external drive then use that to upgrade my CD only system?
I bought an IPOD Nano but it needs a system with 10.4.

If you want to "copy" the DVD system to an external
and then install it on a computer that does not have a DVD ROM drive,
it will be very tricky, very time consuming, very confusing,
and there is a chance that what is installed may not be the same exact 100%
of files installed if the "proper way" (boot from OEM CD/DVD) also the way I'm referring to you don't even have the options such as erase and install, preserve user profiles, archive and install, and etc... as you would if you were booting from the DVD/CD.
In theory I think it can be done with 10.4 (but I haven't done it with it yet, although I've done it with a eMac Restore/10.2.4 Install DVD I bought off of eBay and then ran the install while booting off of my H.D. even while the installer files were on the H.D.)
Another way besides what is mentioned above is to contact Apple cause I think there is an exchange program where you can exchange your Tiger DVD and get Tiger CD's (with a nominal fee of course.)
I would suggest going through Apple, in fact it is safer that way, go through Apple or see if you can find OEM Tiger CD's on eBay.
Good luck with whatever you choose.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

HT1539 can i add my digital copy to itunes with out using the disk? my netbook does not have a disk drive and i want to add my movie to my ipod can i do it with out the use of the disk and just the code?

Can I add my digital copy movie to my iTunes with out using the disk, my gateway laptop/netbook does not have a disk drive I have the unused code and everything, I just can't stuck the movie into the computer itself and my desktop computer has no internet on it. Is there a way to add my movie to my iPod touch 2nd generation tuning 4.2.1

Hiya!
It depends on what kind of digital copy you have. This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
Transferring video from DVDs with iTunes digital content
http://support.apple.com/kb/HT1539
I hope this helps! Best wishes and good luck!

Has anyone else using a MacBook Pro wit Safari hot mail had a recent issue (s) like when trying to att. a file in an e mail and getting an error message stating"can't send 0 bytes? Or that you can't copy and paste with out getting a "hotmail can't...

Have a MacBook Pro. Been using hot mail/Safari. Suddenly can't copy and paste an e mail. Can't make an att> without getting an error message.."0 bytes empty" Got ahold of hot mail was told yes there is a problem between Mac and hot mail Safari and for $59.00 they can fix it. Forgot to ask if the same would apply if I were a pc user. Anbody shed some light on this? Anyone recomend a better em ail service other than g mail?

HELP! Is there anyone out there who knows how I can fix this????
Thanks!

How can i copy iphone contacts to my sim with out cydia

Hey,
I have a factory unlocked iphone 4 16 gb. I would like to know as to how can I copy all the iphone contacts to my sim..

the iPhone sim does not carry any data, contacts or anything else.
and discussions of "other "methods is banned by the Ts&Cs you agreed to on joining this Forum

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

Two computers and two users with the same name. Can't copy files anymore...

Hi all, after a user migration to my new iMac I had to make a change of the shortname. I knew it was not a good idea but had no choice otherwise I had to wait other 3 hours to migrate data again...
Anyway, I managed to change my shortname with success, but one strange thing happened afterwards... I have two macs networked, both have an admin user with the same shortname/real name, 'gillo' (I followed the procedure in one of these two, the Intel iMac. The other, a Powerbook, was not modified).
While previously I had no problems in copying files from the user 'gillo' on the Powerbook TO the user 'gillo' on the iMac, after the shortname change I'm not anymore able to do it. The error I get is:
"The operation cannot be completed because you do not have sufficient privileges for some of the items"
Doesn't matter where I put the files, Desktop, Documents, even the Drop Box, I always get the same error.
I went through some checks and this is the 'log':
- The files/folders in the iMac 'gillo' directory are not locked.
- The files can be copied without troubles to the dirs of another admin user
- Permissions are the same as the other admin user and owner/group are the correct ones.
- Both Macs have 10.4.6
- The 'gillo' user on the iMac can copy files FROM the user 'gillo' on the Powerbook.
- I repaired permissions and the hard disk booting from the install DVD.
- I tried to change permissions of the directories (such as Desktop) on the iMac 'gillo' user allowing everybody to read/write. Also a no go.
Anybody went through this already? Or maybe something similar not directly related to the short name change?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

How can i copy line with text and image to ms word

When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
How can i copy the image to MS Word?

If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
TLF Custom Clipboard Example:
package
    import flash.display.Sprite;
    import flash.desktop.ClipboardFormats;
    import flashx.textLayout.container.ContainerController;
    import flashx.textLayout.conversion.ITextImporter;
    import flashx.textLayout.conversion.TextConverter;
    import flashx.textLayout.edit.EditManager;
    import flashx.textLayout.elements.*;
    import flashx.undo.UndoManager;
    // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
    // and adds a handler for plain text that strips out all consonants (everything except aeiou).
    public class CustomClipboardFormat extends Sprite
        public function CustomClipboardFormat()
            var textFlow:TextFlow = setup();
            TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
        private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008"><p><span color=\"0x00ff00\">Anything you paste will have all consonants removed.</span></p></TextFlow>';
        private function setup():TextFlow
            var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
            var textFlow:TextFlow = importer.importToFlow(markup);
            textFlow.flowComposer.addController(new ContainerController(this,500,200));
            textFlow.interactionManager = new EditManager(new UndoManager());
            textFlow.flowComposer.updateAllControllers();
            return textFlow;
import flashx.textLayout.conversion.ITextExporter;
import flashx.textLayout.conversion.ConverterBase;
import flashx.textLayout.conversion.ITextImporter;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.IConfiguration;
import flashx.textLayout.elements.TextFlow;
class VowelsOnlyImporter extends ConverterBase implements ITextImporter
    protected var _config:IConfiguration = null;
    /** Constructor */
    public function VowelsOnlyImporter()
        super();
    public function importToFlow(source:Object):TextFlow
        if (source is String)
            var firstChar:String = (source as String).charAt(0);
            firstChar = firstChar.toLowerCase();
            // This filter only applies if the first character is a vowel
            if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
                var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
                source = source.replace(pattern, "");
                var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
                importer.useClipboardAnnotations = this.useClipboardAnnotations;
                importer.configuration = _config;
                return importer.importToFlow(source);
        return null;
    public function get configuration():IConfiguration
        return _config;
    public function set configuration(value:IConfiguration):void
        _config = value;
import flashx.textLayout.elements.ParagraphElement;
import flashx.textLayout.elements.SpanElement;
import flashx.textLayout.elements.ListElement;
import flashx.textLayout.elements.ListItemElement;
class AdditionalListExporter extends ConverterBase implements ITextExporter
    /** Constructor */
    public function AdditionalListExporter()
        super();
    public function export(source:TextFlow, conversionType:String):Object
        if (source is TextFlow)
            source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
            var list:ListElement = new ListElement();
            var item1:ListItemElement = new ListItemElement();
            var item2:ListItemElement = new ListItemElement();
            var para1:ParagraphElement = new ParagraphElement();
            var para2:ParagraphElement = new ParagraphElement();
            var span1:SpanElement = new SpanElement();
            span1.text = "ab";
            var span2:SpanElement = new SpanElement();
            span2.text = "cd";
            list.addChild(item1);
            list.addChild(item2);
            item1.addChild(para1);
            para1.addChild(span1);
            item2.addChild(para2);
            para2.addChild(span2);
            source.addChild(list);
            var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
            exporter.useClipboardAnnotations = this.useClipboardAnnotations;
            return exporter.export(source, conversionType);
        return null;

With out RAMN can we copy dadafiles

Similar Messages

Maybe you are looking for