With python call paython2
Hi. I would like to set pythonpath (but i dont know how), that when i call from console: python, it runs python2 and when i call python3 it runs python3. How can i set this?
Lea wrote:Hi. I would like to set pythonpath (but i dont know how), that when i call from console: python, it runs python2 and when i call python3 it runs python3. How can i set this?
Change the shebang in your scripts instead. In the long run it will cause much less problems.
Similar Messages
-
LabVIEW binary format that can be opened with Python
I need to save data in a binary format which can be opened with Python. I have tried the "Write Waveforms to File (1D).vi" and can open them back up in LabView, but the binary format is not published anywhere, so I cannot open them in Python. They appear to be saving as DataLog type binary files.
Is there another binary format which I can use that I can open in Python?
The reason I need this is that with 16-channel DAQ at 20kHz I can only save about 30 seconds of data. For longer periods, the task of writing to a text file consumes all available memory and cpu.I found a solution. I found an open-source project called pyTDMS (google for it), and it can read tdms type files sometimes. It was some trial and error to get my data saved in a way that pyTDMS could open the file, but in the end it works great.
I have two digital output channels as well as 16 analog input channels, so here is how I had to save the data within LabView:
The 16 analog input channels were saved as a 1D array of waveforms. Then the digital output channels were made into another 1D array of waveforms. The trick was to use the write tdms subvi twice. Once for the analog input channels and again, on the same file, for the digital output channels. pyTDMS opens these files just fine, and I can use the metadata to sort out what channels the data goes with in Python. -
[FIX] Getting hda_analyzer to work with python
Hi everyone,
I meant to put this up some time ago, so I apologise if this ends up as just noise but maybe this will help some people:
If you have problems running hda_analyzer with the new python updates heres how to solve it (without downgrading):
Change the last line in run.py from this:
os.system("python %s" % TMPDIR + '/' + FILES[0] + ' ' + ' '.join(sys.argv[1:]))
to this:
os.system("python2 %s" % TMPDIR + '/' + FILES[0] + ' ' + ' '.join(sys.argv[1:]))
Simple change, but it will ensure that this script calls the hda_analyzer script correctly (it requires python2, whilst the update puts the default python call to ver 3).
Also, run the <run.py> script like this:
python2 ~/run.py
<< the "~/" is optional and not always usefull (depending on where run.py resides) >>Have you tried searching/asking in the crossover forums?
http://www.codeweavers.com/support/forums/general/?;t=27 -
How to install Berkeley DB to use with Python 3?
I have heard that Berkeley DB is a good database.
It seems it used to included in Python 2.x standard libraries but got excluded from 3.x version.
I want to use only Python 3.x, so I need to install Berkeley DB somehow to use it with Python 3.x.
Could you give me a step-by-step guide how to do it?
Thank you.It should be but it is not.
setup.py gives errors:
C:\Users\3X\Desktop\bsddb3-5.3.0>python setup.py
Traceback (most recent call last):
File "setup.py", line 7, in <module>
import setup3
File "C:\Users\3X\Desktop\bsddb3-5.3.0\setup3.py", line 322, in <module>
db_h_lines = open(os.path.join(incdir, 'db.h'), 'r').readlines()
FileNotFoundError: [Errno 2] No such file or directory: 'db/include\\db.h'
I am using Windows 7 x64, Python 3.3.2.
Thank you
Edited by: 1009721 on Jun 6, 2013 11:23 PM -
Need help with python script for Deluge
I am using Deluge 1.3.2 with web server, and all works fine, I use this script in the Deluge settings to execute upon torrent completion:
#!/bin/bash
torrentid=$1
torrentname=$2
torrentpath=$3
torrenttimedelta=`/usr/bin/python2 /home/bobby/scripts/deluge/torrentTimeDelta.py $1`
subject="Started download new torrent!"
message="$torrentname to $torrentpath"
echo -e `date`"::Finished downloading torrent:$2 in: $3" with id:$torrentid >> ~/logs/scripts.log
echo -e `sendEmail -t [email protected] -f [email protected] -u "deluge server notification: torrent $torrentname is complete!" -m "$torrentname has completed downloading at: $torrentpath and took $torrenttimedelta to complete :)" -xu [email protected] -xp password -v -o tls=yes -s email.com` >> ~/logs/scripts.log
echo ---------------------------------------- >> ~/logs/scripts.log
This is to email me when a torrent is done and works. What I wanted to add to this email was the time taken to complete the torrent. I have gotten help from Deluge forum in this thread: http://forum.deluge-torrent.org/viewtop … =9&t=36989 However I think it's something with Python within Arch that is the obstacle, and so that helpful person can't do much more IMO. The python script I'm using is:
#!/usr/bin/python2
from deluge.ui.client import client
from twisted.internet import reactor
d = client.connect()
def on_connect_success(result):
print "Connection was successful!"
def on_get_torrent_value(value):
for torrent in value:
print "%s: %s" % (torrent, value[torrent]["name"])
client.disconnect()
reactor.stop()
client.core.get_torrents_status({}, ["name"]).addCallback(on_get_torrent_value)
d.addCallback(on_connect_success)
def on_connect_fail(result):
print "Connection failed!"
print "result:", result
d.addErrback(on_connect_fail)
reactor.run()
Now if I call this from shell directly, it works. However, including it with my email script at the top, Deluge itself freezes and no email is sent. I run ps aux | grep deluge and I can see that the script has run, but apparently died and all is just hanging. I kill the script process and Deluge resumes just fine, the email is sent. Kinda confused how to remedy this, appreciate any help Thanks
P.S. When I get the email, the part that says ""$torrentname has completed downloading at: $torrentpath and took $torrenttimedelta to complete "" shows nothing where $torrenttimedelta should be, it just says "and took to complete"[edit] Sorry, I don't use deluge and I messed up my test script. If the script is executable try `/home/bobby/scripts/deluge/torrentTimeDelta.py $1`
Are there any other errors? or try running bash with debug output to see if it will tell you something else
The problem you are having is bash doesn't recognize variables inside the tick marks.
Hope that helps
Last edited by rickeyski (2011-07-05 19:27:36) -
Trying to install pgmagick with python 3
Hello,
I'm trying to get pgmagick to work with Python 3.
First thing I had to do was linking to the Python 3 boost libraries, by changing lines 83 and following on setup.py from
if _version >= (3, ):
boost_lib_target_files.append("boost_python-py%s%s" % (_version[0], _version[1]))
boost_lib_target_files.append("boost_python-mt-py%s%s" % (_version[0], _version[1]))
#gentoo appends the python version numbers to the boost_python libraries
boost_lib_target_files.append("boost_python-%s.%s" % (_version[0], _version[1]))
boost_lib_target_files.append("boost_python-mt")
to
if _version >= (3, ):
boost_lib_target_files.append("boost_python-py%s%s" % (_version[0], _version[1]))
# ArchLinux uses boost_python3
boost_lib_target_files.append("boost_python%s" % (_version[0]))
boost_lib_target_files.append("boost_python-mt-py%s%s" % (_version[0], _version[1]))
#gentoo appends the python version numbers to the boost_python libraries
boost_lib_target_files.append("boost_python-%s.%s" % (_version[0], _version[1]))
boost_lib_target_files.append("boost_python-mt")
Now, when I launch setup.py, I get the following error:
$ sudo python setup.py install
include header path: /usr/include/GraphicsMagick/
Found boost lib: /usr/lib64/libboost_python3
boost lib: boost_python3
library path: /usr/lib64/libGraphicsMagick++
Libraries: ['boost_python3', 'GraphicsMagick++']
GraphicsMagick version: 1.3.19
running install
Traceback (most recent call last):
File "setup.py", line 174, in <module>
keywords="GraphicsMagick ImageMagick graphics boost image")
File "/usr/lib/python3.4/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.4/distutils/dist.py", line 955, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
cmd_obj.run()
File "/usr/lib/python3.4/site-packages/setuptools/command/install.py", line 67, in run
self.do_egg_install()
File "/usr/lib/python3.4/site-packages/setuptools/command/install.py", line 103, in do_egg_install
cmd.ensure_finalized() # finalize before bdist_egg munges install cmd
File "/usr/lib/python3.4/distutils/cmd.py", line 107, in ensure_finalized
self.finalize_options()
File "/usr/lib/python3.4/site-packages/setuptools/command/easy_install.py", line 313, in finalize_options
self.index_url, search_path=self.shadow_path, hosts=hosts,
File "/usr/lib/python3.4/site-packages/setuptools/package_index.py", line 269, in __init__
Environment.__init__(self,*args,**kw)
File "/usr/lib/python3.4/site-packages/pkg_resources.py", line 799, in __init__
self.scan(search_path)
File "/usr/lib/python3.4/site-packages/pkg_resources.py", line 829, in scan
self.add(dist)
File "/usr/lib/python3.4/site-packages/pkg_resources.py", line 849, in add
dists.sort(key=operator.attrgetter('hashcmp'), reverse=True)
TypeError: unorderable types: str() < NoneType()
I am quite new to building Python packages, so I'm not sure about what is going wrong.
Any help is appreciated.
Thanks,
gmI get the same issue installing another package using setuptools and python3 any solutions so far ?
Thanks. -
Problem with python script [solved]
I've been trying to run this script (with wlan0 as my interface) and it spits this out. I'm guessing this is due to some sort of syntax problem and should be pcap.somethingelse(interface) instead of pcap.pcap(interface) but I have no experience with python so I'm totally clueless.
Traceback (most recent call last):
File "mediaripper.py", line 143, in <module>
pc = pcap.pcap(interface)
AttributeError: 'module' object has no attribute 'pcap'
Edit- NVM, I just had the wrong version of pypcap installed.
Last edited by omgwtfbyobbq (2011-04-12 23:48:36)I hate to revive such an old thread, but what version of pypcap did you use? I'm having the same issue.
-
I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph -
I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon -
RFC hangs with a call to function module SSFC_PARSE_CERTIFICATE
Hello ,
We are working on BI 7.0 SP9 .
When we try to test the RFC connection from the WAS Abap to the portal ( WAS JAVA ) using SM59 , the test is hanging but we can read in the bottom of the screen 'Connexion bcv51sf2... OK' !!!
The test connection works sometimes .
But when its not working , with the debug mode , I can see that the program SAPLSSFG/LSSFGU19 is hanging in the function module SSF_GET_PARAMETER with a call to the function SSFC_PARSE_CERTIFICATE
CALL FUNCTION 'SSFC_PARSE_CERTIFICATE'
EXPORTING
CERTIFICATE = PABCERT
IMPORTING
SUBJECT = STR_PROFILEID
EXCEPTIONS
SSF_KRN_ERROR = 1
SSF_KRN_NOMEMORY = 2
SSF_KRN_NOSSFLIB = 3
SSF_KRN_INVALID_PAR = 4
OTHERS = 5.
ENDIF.
ENDIF.
ENDFUNCTION.
The variable STR_PROFILEID has the value of the field ID of the table SSF_PSE_H
STR_PROFILEID =CN=QWO, OU=XXXXX, O=YYYY, C=FR
Due to this error , we cant transport BI Web templates because at the end of the import in the method execution of the transport there is a call to the portal with the RFC. And the transport is hanging
Thanks in advance for you help .
Happy new year. Milan.Hi Frank ,
See below the result of the test :
Test for function group SSFG
Function module SSF_GET_PARAMETER
Export parameters
Value
APPFOUND
<SYST>
SSFTOOLKIT
SAPSECULIB
STR_FORMAT
PKCS7
STR_PAB
/usr/sap/QWO/DVEBMGS01/sec/SAPSYS.pse
STR_PAB_PASSWORD
STR_PROFILEID
CN=QWO, OU=XXXX, O=YYYY, C=FR
STR_PROFILE
/usr/sap/QWO/DVEBMGS01/sec/SAPSYS.pse
STR_PROFILEPW
STR_HASHALG
SHA1
STR_ENCRALG
DES-CBC
B_INCCERTS
X
B_DETACHED
B_DISTRIB
X
But my problem now , it's that 1 of the 2 RFC is working fine and the other one after 1 good rfc test , is hanging now at the end of the function 'CONVERSION_EXIT_ISOLA_OUTPUT' line 14 !!!
See below the ABAP stack just before the hanging .
1 FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" VALUE(INPUT)
6 *" EXPORTING
7 *" VALUE(OUTPUT)
8 *"----
9 OUTPUT = SAVE_INPUT(1) = INPUT.
10 CHECK SAVE_INPUT(1) NA ' *'.
11 SELECT SINGLE * FROM T002 WHERE SPRAS = INPUT.
12 CHECK SY-SUBRC = 0.
13 OUTPUT = T002-LAISO.
14 ENDFUNCTION.
Stack Dep Event type Event Program Include Line
10 FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT SAPLLANG LLANGU04 14
9 FORM CONVERSION_EXIT SAPCNVE SAPCNVE 107
8 EVENT SYSTEM-EXIT SAPLDSYA <SYSINI> 20
7 FUNCTION DOKU_OBJECT_EXIST SAPLDSYA LDSYAU09 43
6 FORM FILL_EXCL_TAB RSDBRUNT RSDBRUNT 5.664
5 FORM %_INIT_PBO_LAST RSDBRUNT RSDBRUNT 4.061
4 FORM INIT_PBO RSDBRUNT RSDBRUNT 3.666
3 FORM %_INIT_PBO_NEW RSRFCPIN RSRFCPIN 496
2 MODULE (PBO) %_INIT_PBO RSRFCPIN RSRFCPIN 496
1 EVENT SYSTEM-EXIT RSRFCPIN <SYSINI> 20
As i said in the first post , the RFC test is hanging sometimes but now it seems that it's not hanging everytime at the same line of the abap code , if i can trust the debugger !
...and after another RFC test , now all the RFC to the portal are working ...
It seems that when it's hanging , it's at the end of the functions ( SYSTEM_CALLSTACK
or CONVERSION_EXIT_ISOLA_OUTPUT or SSF_GET_PARAMETER ) .
A memory or OS problem ?
Best Regards. Milan. -
How do I install a version of vim with Python support?
I'm trying to install a version of vim with Python support, but for some reason I can't seem to find anything useful when I search.
So far I've found posts that say arch doesn't have one built with Python support, and use this <broken link> AUR package. I've search AUR for "vim python" which turned up nothing. There *does* exist extra/gvim-python3, but when I install that, then vim (not gvim) still tells me "Error: Required vim compiled with +python"
This search:
https://duckduckgo.com/?t=lm&q=arch+lin … on+support
Provides:
https://bbs.archlinux.org/viewtopic.php … 1#p1070281 - Only a link to a bug report
https://bbs.archlinux.org/viewtopic.php … 0#p1144210 - Post with the 404'd AUR link
What I finally found was this Gist with directions on using the ABS:
https://gist.github.com/MicahElliott/3048622
Ultimately you'll have to change the particular tar.xz files you use in the pacman -U steps, but this should get you vim with Python enabled.I have downloaded vim by cloning The Vim Mercurial repository.
hg clone https://vim.googlecode.com/hg/ ~/bin/vim_bin
Then i have a this script to install it in my own ~/bin/ dir.
#!/bin/bash
cd /home/myuser/bin/vim_bin/src
echo "---Configure----"
./configure --prefix=/usr --localstatedir=/var/lib/vim \
--with-features=big --with-compiledby="Custom Vim insall" \
--enable-gpm --enable-acl --with-x=no \
--disable-gui --enable-multibyte --enable-cscope \
--enable-netbeans --enable-perlinterp \
--enable-rubyinterp --enable-luainterp \
--enable-pythoninterp --with-python-config-dir=/usr/lib/python2.7/config \
--enable-python3interp --with-python3-config-dir=/usr/lib/python3.4/config > my_log
echo "=== Make ==="
make >> my_log
echo "==== Install ===="
make install >> my_log
Hope it helps some one -
Problems with a call transaction
Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advanceHi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
( contador = 3 OR contador = 4 or CONTADOR = 5 ).
READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
d_clave = t_clave-bschl.
i = i + 1.
CASE i.
WHEN 1.
PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN t.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN OTHERS.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
ENDCASE.
READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
zzbtd = t_resumen-zzbtd.
IF j_hkont = t_porcentajes-cfacpr.
PERFORM bdc_field USING 'COBL-PRCTR' t_porcentajes-prctrfac.
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
PERFORM bdc_field USING 'COBL-KOSTL' '20801'.
ELSEIF t_resumen-hkont = t_porcentajes-creca.
PERFORM bdc_field USING 'COBL-KOSTL' '20401'.
ELSE.
IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 40.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 50.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ENDIF.
*Fin modificacion marzo 2007.----
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
PERFORM bdc_field USING 'COBL-ZZBTT' t_resumen-zzbtt.
PERFORM bdc_field USING 'COBL-ZZBTU' t_resumen-zzbtu.
PERFORM bdc_field USING 'COBL-ZZBTS' t_resumen-zzbts.
PERFORM bdc_field USING 'COBL-ZZBAG' t_resumen-zzbag.
PERFORM bdc_field USING 'COBL-ZZBRE' t_resumen-zzbre.
PERFORM bdc_field USING 'COBL-ZZBC8' t_resumen-zzbc8.
PERFORM bdc_field USING 'COBL-ZZBC9' t_resumen-zzbc9.
ENDIF.
ENDLOOP. -
HT4528 my ringer will not sound with incoming calls, please help
my iphone 4s will not ring with incoming calls. any ideas on how i can fix it?
Try sliding the button that is above the volume up and down buttons to see if you have it muted.
-
Iphone 4 contact pictures do not display with incoming calls
iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade
I am assuming that you have associated a picture with the contact in the information for the contact
-
HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?
My iphone would not ring with incoming call despite ring tone was set up using sound setting. In the beginning, it did ring. After a while it stops working. Any idea to make it work again?
Is the silent switch on the side of the iphone on?
Maybe you are looking for
-
I recently had a hard drive crash. I replaced the C: drive with a solid state and now have 3 internal HDs. C: for the OS (Windows 7), D: for data and P: for program installation. Because I replaced the C: drive, I had to re-install all my programs. N
-
I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes
-
Open Hub transporting problems
Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've
-
Hi, In C there is a function strchr() to find a char in a string. Is there an equivalent funtion in Java? The function indexOf() returns an int, but I want this char search would return a boolean value. So help please, thanks a lot chanh
-
ADF Region Interaction Pattern
Hi, I have an issue in refreshing region. The problem senario is as follows. I have a region on main page which displays some summary data, I click on the one of the link of this data to refresh another region on the main page, which works perfectly