With reference to Gigaworks Progamer G500 5.1

I have recently purchased Creative Gigaworks Progamer G500 5.1 speakers and wish to query the apparent overheating subunit fuse which in a small proportion of cases appears to present reason for concern.
I plan to invest in a heavy duty 2700 Joule surge master suited to protecting high specification computer systems and heavy duty electronic equipment yet would such protection reduce the chances of fuse damage ?
Would you also recommend that the unit is switched off via the on/ off switch on the subunit on a daily basis when not in use to protect the system or are such precautions simply not necessary ?
Many thanks for your opinions and insight on the matter

yes I have CMSS enabled but the problem seems to be somewhere else...
the problems seems to be bigger than it looks because I realized that when I connect an standalone MP3 player to the system via an adapter so all the channels should have the same source (green/black/orange cable all have the same source) the rear speakers remain silent. I have an older Creative Labs DTT2200 which is also 5.1 and when I do this with this system every speaker playes correctly at full power.
I have also tried to change cables for front speakers with the rear speakers and sound is simply not coming when the cables are connected to the rearchannel on the subwoofer...
Any ideas?

Similar Messages

  • SoundBlaster Audigy + GigaWorks ProGamer G500

    Hello! If the upmix is OFF, where suppose the sound come? all the speakers?
    When upmix is OFF, the center-speaker is off?
    Sorry my bad english..
    Please answer.. [email protected]
    T. Juha

    well u know something... we have nothing to do ill tell you why.. people will tell you its normal. jsut pack to creative and theyll send you a new system... this seems to be an excelent solution.. but after reading the posts on the forum...the only solution is to pack it ,return it to place of purchase. and try as much as u can even if it extended to a fight with the manager to give you ur money back.. im so serious.. ill benefit nothing from this but believe that this prblem will occurr everytime even if u replaced the system.. it woul haven even after 10 days, motn h, year , or may be two... justr tyr in any way u can to get yormoeny back.... i called theplace of purchase of my gigaworks s750 and todl them that i need the money ,, tomorrow theyll call me back.. i dont want to deal with creai've anymore

  • Connecting Gigaworks ProGamer G500 to TV and PC at same time?

    Yeah well thats my question. Is it possible to connect both to TV and PC at same time, and get 5.1 sound out of each? (not at same time though). Message Edited by mefi on 10-11-2007 03:47 AM

    OOps sorry I wrote the wrong thing. It's been redone now.
    Message Edited by mefi on 10-11-2007 03:48 AM

  • Speaker stands for ProGamer G500

    Does anybody know speaker stands that are compitable with the Creative Gigaworks ProGamer G500?

    They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
    Here's a picture
    http://www.creative.com/products/pro...uct=955Message
    Edited by mtyz on 08-18-2006 04:28 AM

  • Ddts-100, progamer g500 with Dolby Digital with wma pro, please reply

    Is the ddts-100 with the progamer g500 compitable with Dolby Digital with wma pro or should I just use the normal Dolby Digital?

    plz reply

  • Depot  Excise Invoice with reference to Delivery from project

    please understood my requirement
    Normal Depo Sales is like VA01-VL01N-J1IJ----VF01 here whatever excise values captured in J1IJ those values come to the commercial Invoice.
    As per My requirement we are creating Project and while creating sales order we have to assign WBS element.
    now Project -Delivery--Excise Invoice J1IJ
    Sales order -
    Inovice VFO1
    my question is how excise and commercial Invoice values come together.
    regards
    etr

    Hello Amol,
    you can create with reference of the deliveyr document. in J1iin trnsaction you have the option in the header tabs of create from delivery
    enter the delivery and create the excise invocie
    Hope this helps
    Thanks
    akasha

  • Error while creating a credit memo with reference to invoice

    HI aLL,
    I am facing one issue while creating a credit memo request in VA01 with reference to invoice.
    Our project stock is valuated stock.
    When we try top copy the error pops up" Valuated project stock not allowed with customer stock." and the line item is not copied in the credit memo.
    Diagnosis:The entered wbs manages a valuated project stock,at the same time sales order stock is maintained on sales order line item.this combo is not allowed as different valuation methods within a project is not allowed.
    Tarun Kapur

    Dear Tarun!
    1.Within a project we can get stock only in PROJECT or in SALES ORDER STOCK.....a single material can not be a both place at particular time ..so keep only one
    Project Stock or Sales Order Stock..
    2.Check DIP PRofile (ODP1) in usage BILLING AND RESULT ANALYSIS -Charectiristic -SDOC TYPE CMR.....are you selecting right document to which you want to copy .....
    Rewards Points if usefull
    Regards
    SMITH

  • Error while posting a sales order created with reference from contract for

    Hi,
    I am posting a sales document( Type: WA)  created with reference from contract document(  type wk2) for delivery.  The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined".  Please help me out how to resolve this issue.
    Thanks
    Jayant

    Hi Jayant,
    I think its value contract releated error,
    You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
    and do item category assignment through T.code- VOV4.
    plz.maintain like that,
    WK2 -          -VCIT-         -           - WAN(contract item category),
    wk2  -          -        -VCTR-          - WAN((contract item category),
    you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
    WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
    WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

  • HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

    Dear All,
    I want to contol on creation of Sales order with reference to earlier SO?  While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
    I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
    Nikhil

    Nikhil Deshpande,
          If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
    Thanks,
    Mariano.

  • Changing quantities in sales order with reference to quotation

    Hi,
    Quotation has been created for Product -- A, 10 quantities.
    Sales order created with reference to quotation, system copies 10 quantity in sales order.
    How do you restrict in sales order end user should not change quantities, system should not allow for changes by end user. If end user changes Qty system should give an "Error message", so that sales can not be saved.
    Could you suggest solution ASAP.
    Thanks in Advance.
    Regards,
    vamsi.

    Normally You will have a warning message set for this. under class V1. if you want the error to be hard error then you would have to hard code it in a user exit under mv45afzz "userexit_save_document_prepare" where u can check if the quantities in the quote and sales order are different and create a hard error.
    the other option which I am not sure if it is possible is to propose the eror in message class v4 which you can control thru customisation under SPRO>SD>message settings
    reward points if it helps
    regards
    Biju

  • Mandatory fields With reference to Material types

    Dear Gurus,
    I need to make few fields as mandatory with reference to material types while creation of the material master data.
    For example:
    For Semi finished and Finished Schedule margin key is required(mandatory)
    For Raw Materials Schedule margin key is optional.
    Regards,
    Siddharth

    Hi
    find  following step to make field mandatory for material type
    Follow the stpes for making field as optional, required entry
    1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
    2.Go to T.Code: OMSR and enter that field name and get Selection Group
    once you get selection group and field name
    3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
    3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
    check following link you will get clear idea [How to configure the fields required for each Material type ?;
    Regards
    Kailas ugale

  • Creation of Billing with reference to the Sales Order

    Dear Friends,
    I need your suggestion for the following scenario.
    Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
    e.g  sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
    Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
    Is it possible? If yes,how?
    Thanks in advance.
    Regards,
    Shrikant

    Hi Murali,
    Currently client has software where he enters only  Sales Order no and their software creates the billing for the delivery document for this Sales Order.
    Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
    Regards,
    Shrikant

  • Importing a photo folder just with references creates a photo library 2/3 of its size. crazy!

    after ignoring iphoto for many reasons over the last years i thought i give it a try with the new photo app.
    i imported a 70gb photo folder - turning OFF to copy it into the library first, just refering to them - and now it ate up all my space by creating a 41gb (!!!) photo library just with references alone. so now i have a 70gb folder plus an index file that is 41gb big. i am beyond baffled.
    am i doing something wrong here or are they crazy?
    they cannot possibly think this is a smart way to store photos with the small internal hard drives they give us nowadays can they?

    it gets even worse. "photos" has created empty subfolders of almost every photo in my original photo folder.
    thank you apple. good job.

  • Problem with reference and class

    I would like to transit a Data object in member function of another class with Labview 9.0 reference with "In place element structure". I use the reference for optimize allocation memory.
    When i use a dispatch static : Vi is executable  -> "TestRefAppExt Statique.vi"
    With Dispatch dynamic : Vi is not executable (because Read/Write a reference's data value : class's Object in a reference can't be replaced by another) -> "TestRefAppExt DynamiqueWithoutParent.vi"/"TestRefAppExt DynamiqueWityParent.vi"
    When i use Preserve Run-Time Class function the Vi becomes executable
    but it creates some allocations. Labview creates copy of data object
    when i'm running the vi. (increase size of data you'll see)
    The problem is that i can't recuparate the same object without copy in dispatch dynamic. Because LabView can't change the data object transited in a dispatch dynamic function of another class (child class).
    I compared in project labview Execution's performance with and without Reference in dynamic and static and for compare, with Message Box and a Reference of Data object's cluster.
    Without reference, i made three Vi : "TestAppExt Statique.vi", "TestAppExt DynamiqueWithParent.vi" and  "TestAppExt DynamiqueWithoutParent.vi"
    The static's function works well, but when Labview calls dispacth Dynamic functions, it works more slowly.
    With reference, i made three vi too : "TestRefAppExt Statique.vi", "TestRefAppExt DynamiqueWithParent.vi" and "TestRefAppExt DynamiqueWithoutParent.vi" with cast Preserve Run-Time Class.
    All This functions are more slowly than without reference.
    I tried for fun to test with the same class with Message Box : "TestRefAppExt Fifo.vi" and Cluster "TestRefAppExt DynamiqueCluster.vi" with the dynamic function. The result is better than with reference in dynamic.
    "TestRefAppExt StatiqueRef.vi" and "TestRefAppExt DynamiqueRef.vi" are a solution of this problem but it's better to work with In place element structure. And it doesn't resolve reference performance in execution.
    Why it's not possible to recuperate data object after a dispatch dynamic?
    Why the performance is not good with LabView reference 2009?
     I attached the project.
     Could you help me please
    thank you so much.
    Pascal
    Attachments:
    RefTest.zip ‏476 KB

    Yes, it helps but there is one thing that isn't being replicated which is the possibility to remove the link from the generated editor.
    My EMF looks like:
    @gmf.node(label="uri", figure="ellipse", label.edit.pattern="{0}", label.view.pattern="<<Class>> {0}", label.icon="false")
    class Class extends Resource {
    @gmf.link(target="subClassOf", target.decoration="arrow", label.text="subClassOf", label.readOnly="true")
    ref Class[*] subClassOf;
    And when I do the fix with self.subClassOf.remove(self) the link isn't removed (although now the model now passes the validation). Is there any easy way to do that?
    Regards

  • Payment Posting with Reference to Purchase Order

    Dear Experts,
    I've created a Purchase Order with reference to a purchase requisition. Now I want to post MIRO with reference to this Purchase Order Number to give payment to Vendor mentioned in Purchase order. But when I going to post miro amount not coming which I mentioned in Purchase Order!!
    How can I post MIRO with reference to Purchase Order Number? Is it possible?
    Best Regards.
    Ripon

    >
    riponkp wrote:
    > Dear Experts,
    >
    > I've created a Purchase Order with reference to a purchase requisition. Now I want to post MIRO with reference to this Purchase Order Number to give payment to Vendor mentioned in Purchase order. But when I going to post miro amount not coming which I mentioned in Purchase Order!!
    >
    > How can I post MIRO with reference to Purchase Order Number? Is it possible?
    >
    > Best Regards.
    > Ripon
    Seems like you are doing MIRO before GR. If GR is done, it will pick the amounts, if GR is not done, the amounts are not picked. You enter the amounts manually with reference to PO.

Maybe you are looking for