With respect Pulling reports in GL (FBL3n)

Dear Experts,
My clients requirements with respect to GL:
They need to pull the reports in such a way that, they dont want the values which is nullifying in specific GL A/c, Once they get nullify it should go to other GL A/c called it as Clearing A/c.
In the above scenario how do we proceed?
Please help me out
Kindly do the needful in this regard.
Regards,
Vinayaka
Mo-0 99867 15378

Thanks a lot for ur earliest response..
ok fine.. that i know. their reqt like they need  to segragate ie:(GL A/c No10000) GL items in such a way that, as soon as items  is getting cleared, automatically goes to other Specific GL (A/c no 200000) which is callled as "Clearing A/c".  the items which is about cleared remains the same in the GL a/c(No 10000)...
Pls do the needful in this regard
M waiting for ur swift reply
Thanks and Regards,
Vinayaka

Similar Messages

  • Question with respect to report painter

    Hi All,
    I needed to copy the standard form 3CST6 which is a drilldown cost report in the standard system that shows the project objects along with the Name of the Responsible Person in the output.
    I needed to make a change to the copied report where I had to change the general selection from period / year to fiscal year. Hence I copied the form corresponding to 3CST6, made the change to fiscal year in the form corresponding to 3CST6 and while creating a new project, included the changed form. (copied from 3CST6).
    After making the change to fiscal year and then executing the copied report, I do not see the responsible person in the output.
    Could anyone help me out with this.
    Thanks & Regards,
    Sushanth Hulkod

    Hi Sushanth,
    Did you debug it.It is better you can keep a proper title.
    Regards,
    Madhu.

  • CST Report with respect to PO

    Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
    Pls get me table numbers from whic i can extract

    You can link EKBE to BKPF to BSET.
    EKBE has the PO number and Material Doc#, BKPF has the Accounting Doc#, and BSET has the tax information.  You might need to right a query to get your required list.

  • Expense reports with respect to posting date

    Hi Folks,
    Kindly let us know if any statndard reports are available to extract trip details with respect to the trip posting date (prrw).
    Thanks,
    Nandagopal C

    Hi Folks,
    The posting date is maintained in the table PTRV_Doc_header. Using the table we have created a  query to fetch the posted trips according to  posting date.
    Thanks,
    Nandagopal C

  • Possible standard reports that can be generated with respect to lead...

    hii friends,
    i am new to CRM.
    can any on please give me some idea about what kind of standard report can be generated in crm with respect to leads and opportunity.
    thanks,
    regards,
    akshay ruia

    Hi Akshay
    Lead management
    1. Won / Lost Leads Lead Origin - Lead Management
    2. Channel Analysis - Lead Management
    3. Efficiency Reporting - Lead Management
    4. History Reporting - Lead Management
    5. Lost Leads - Lead Management
    6. Qualification Level - Channel Mgmt.
    7. Lead History - Channel Mgmt.
    8. Top n Lost Leads (Current Year) - Channel Mgmt.
    9. Won Leads (Current Year)
    Opportunity Management
    Competitors in Current Opportunities
    1. Completed Opportunities According to Status
    2. Completed Opportunities Acc. to Status (Sales Manager Portal)
    3. Expected Product Value
    4.. Expected Sales Volume per Product
    5. My Strongest Competitors Opportunity Item Details
    6. Opportunity Monitor
    7. Opportunity Monitor Timeline Analysis
    8. Opportunity Pipeline
    9. Pipeline Analysis per Phase
    10. Pipeline Analysis per Phase (Sales Manager Portal)
    11. Pipeline Analysis per Region
    12. Sales Volume Forecast
    13. Sales Volume Forecast (Sales Manager Portal)
    14. Targeting Based on Competitors
    15. Targeting Based on Lost Opportunities
    16. Top Five Opportunities
    17. Top Five Opportunities (Business Transaction Number)
    Hope this will be helpful.
    Regards

  • How to trace purchase order number with respect to Purchase requestion numb

    Hi friends,
    Can u please help me how to Trace purchase order number with respect to purchase Requetuion  number. Is there any standard report  available in R/3

    Hi Vamsi,
    Thats what!!!
    Goto SE16 - EBAN - Give PR number in the iput screen.
    In the output screen you will have to do field selection from Menu - Settings - formatlist - choose fields.
    There you choose Purchase Order.
    So the output will display for you POs for the PR that you entered.
    Regards,
    Vishal

  • Restricting issue of goods to cost center with respect to material type

    Dear Users,
    I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
    Thanks,
    Manoj

    Hi Ajay,
    Thanks for valuable input.
    I also thought in the same line , but user has the following concern on this:
    Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
    OKB9: They have different Cost center for different valuation area for the same GL Account.
    Hence through OKB9 also, we cannot post directly to COPA.
    That's the reason the above option were not adopted.
    My other concern to this is:
    In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
    After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
    My question, where can I see that figure whether in any table or in Cost Center report??
    If that is also available we can try to match those values and post to COPA.
    Let me know your thought on this.
    Thanks and regards
    Kami

  • Central Sales Tax Amount with respect to Purchase Orders

    Is there any way to get Central Sales Tax amount with respect to Purchase Order Numbers. I need this for report.
    Pls get me table numbers from which i can extract

    Hi,
    Refer report J1I2 - Sales Tax Register
    Here in the selection screen, enter Tax code, CST Condition type, etc...
    Also refer report S_ALR_87012357 - Advance Return for Tax on Sales/Purchases

  • Backend price update with respect to plant

    Hi SRM Guru's
    Is it possible to update backend price for the material with respect to Plant.
    We are in Classic scenario.
    Currently Report EBP_GET_BACKEND_PRICES updating price for a material  average of all plants from ECC to SRM.
    But we need the price for the material to be updated plant wise.
    Is it Possible.
    Thanks
    With Regards
    Sri.
    Edited by: sri ram on Mar 26, 2009 8:52 AM
    Edited by: sri ram on Mar 26, 2009 11:22 AM

    HI
    first of all you need to make the plant as the valuation area in the ecc and do the delte download for the material master update through CRM parameters.  here you must be very care full about the system.  you need to seleted the delta down in the srm crm paratmeter not initial down load.
    in the delta down load the system will update the current setting in the ecc for the materil. then you will get the exact price for the material what you have sent for the plant.
    Regards
    Satish

  • 0equipment_attr query with respect to 0calyear

    Dear  all,
    i need to make a query showing number of equipments, i use infoprovider 0equipment, however, i need to get records with respect to 0calyear. Is it possible with making a query with 0equipment and how?
    thanks.

    Hi thanks for the reply,
    i guess i should use 0date or 0date_from and fill 0calyear from this field.
    Where i am confused is when i upload data in 0equipment_attr, it overwrites all fields with new values.
    i need to develop a report as follows:
    calyear              equipment number             total capacity
    2008                           12                             23500
    2007                            11                            19000
    can it be possible?
    thanks

  • Sccm 2007 need to pull report of advertisements whose success rate is less then 80%

    sccm 2007 need to pull report of all advertisements whose success rate is less then 80%

    Why not using default reports and filtering out the one less than 80%?
    107: Status of a specific advertisement
    108: All system resource advertisements with status
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • Printing Page Numbers With A Sub Report

    Hi, I have a Crystal Report (XI) that includes a subreport which is identical to the main report because I am actually making the report print 2 copies of the same report with different critera in the detail section only. On the main report I have a Page Header section which I am using the special field "PAGE N of M", so on all pages of the report it is printing this page number. I  My issue is listed below:
    First page of report                    "Fred's Place"                 Page 1 of  2 (Correct)
    Second page of report              "Fred's Place"                 Page 2 of  2 (Correct)
    Third page of report                   "Fred's Place"                 Page 3 of  2 (Not Correct)
    Fourth  page of report                "Fred's Place"                 Page 4 of  2 (Not Correct)
    The first/second page are printing correctly with data being pulled from the main report, but the third/fourth pages are not printing correctly with data pulled from the sub report. My question is how to get the third/fourth pages to print as follows:
    Third page of report                   "Fred's Place"                 Page 1 of  2 (Correct)
    Fourth  page of report                "Fred's Place"                 Page 2 of  2 (Correct)
    Thanks for your help
    Jim Dyer

    Jim,
    Try passing the total page count from the main report to the subreport via a shared variable. Then set up a counter formula in the fake PH of the subreport and convert the counter and the shared variable so that it reads page 1(counter) of 2(shared variable)
    You should also be able to suppress the extra pagenofms in the main report when pagenumber > totalpagecount

  • Oracle crashes when trying to pull reports into Excel

    We are using Oracle 806 with Designer 2000 to pull reports into excel (office 2003).
    Here is the issue, when we try to pull the report into Excel the report pulls and it puts it in the tmapps/files folder, but excel does not open and oracle crashes.
    We also tested it with office 07 with the same results.
    What could be causing this?
    Let me know if there is any other information I can provide to help you help me.
    thank you!

    If by "oracle crashes" you mean the DB, then there are trace/dump files that the DBA can find that will help to identify the cause of the crash. If you mean Designer, I have no experience there.
    Regardless, consider newer versions/alternatives to both since they are both very dated (10 years at least) by this point.

  • List of materials with respect to Class type/

    Dear all,
    In which Tcode or table can i find the list of materials with respect to any class type ?
    Table name for Batch Class ?
    or
    How to find KLART ?
    Edited by: Shailesh2510 on Feb 22, 2010 10:55 AM

    hiii
    To get the class type and class , go to table TCLA or TCLAT.
    And one more thing , here standard system , there is transaction code to get class wise materials list.
    If u want u can cevelop custom reports with help of ABAPer.
    If u give the functional details to technical consuiltant , they easily build the report how ever and what ever u want in custom transaction code.
    Any clarification revert,.

  • Tracking  the stocks with respect  to UD CODE

    HI
    we  are posting  qty  in  only storge location with respect  ud.we have different ud codes  , i want to track stocks with respect to ud.
    regards
    Baswaraj

    Hi,
    Could you explain the situation where you need to get the stock report based on UD code?
    To my knowledge if the material is not batch managed, you cannot divide the stock received from two different orders based on UD codes.
    If the material is batch managed, you can get batch stocks along with UD codes (of the latest inspection lot pertaining to the batch) in to a customized report.
    Revert for any clarifications
    Venkat V

Maybe you are looking for

  • Excise invoice number range - for selling to SEZ

    Dear All, While creating excise invoice for selling in SEZ unit, Excise invoice type is taking Deemed instead of LOU.  Because of this system is asking to allocate number range using J_1IEXLOC number object. Series group is 12 for EXPORT. As selling

  • MacBook Pro 13" or 15" (Non Retina)

    MacBook Pro 13" or 15" (Non Retina)? Which should I get 13" or 15" and it'll be non retina as IMO I think retina ain't good? Or am I wrong? I will be using it for: Docs Music (listening and dloading) Movies (Watching and dloading) Surfing the web and

  • Shared Services with OAM ?

    Plannign a green-field 11.1.2.2 implementation and want to understand whether it will be possible (or indeed is possible in current versions) to integrate Shared Services with OAM ? Thanks is advance ! Alasdair Edited by: 919830 on 09-Mar-2012 03:25

  • Dynamic SQL Command Queries Using Parameters

    Post Author: tdoman CA Forum: Data Connectivity and SQL I'm using Crystal Reports 11 and am trying to dynamically build part of the "Where" clause in the SQL command query to filter data on the server before the results are sent to the client. I'm do

  • Canon Camera Problem... Help quick again please!

    Man guys, this is a nightmare! I have to finish this wedding video today and first I had the head chopped off problem and now this (thanks for the quick advise. I'm going to readback through when I get back to that part. I had to move on last night).