With Scrap during planning, without Scrap during execution/backflush

Dear Experts,
We need to setup our process in such a way, during planning, raw material scrap percentage are considered (for buffer quantity), while during backflush/consumption, this scrap % should not be considered.
How to set up?
Thanks in advance!

Dear Manoj,
In my understanding defining component scrap will be generally considered for planning and consumption.
But in the case of REM - repetitive manufacturing this extra consumption for the % scrap defined can be excluded during
backflush,but in the case of discrete check by some enhancement whether this can be met.
Regards
Mangalraj.S

Similar Messages

An exception occurred during planning process

Hi All,
We are working on Opportunity Planning. as part of it we have configured,planning area, planning level, BPS Lay out & planning profile in BI. This planning profile is assigned to relevant transaction type in CRM 7.0 system.
We have created opportunity with the transaction type for which we have assigned planning profile. when I select the planning in opportunity, I am getting the below message.
An exception occurred during planning process
Can any please let me know why this is happening and help me out in resolving the issue.
Thanks in advance for your reply
Regards,
JM.

Hi JM,
please check trx. st22 and try to activate BSP_WD_EXCEPTION_DISPLAY in trx. saab.
Best regards,
Caíque Escaler

MacBook shuts down without warning during calibration (39% battery power)

My MacBook has been shutting down without warning during recent calibrations (which I've done approximately every two months). Most recently it shut down after 2 hours and 20 minutes on battery power with a battery reading of 39% -- i.e., nowhere close to the 0% of a fully rundown battery.
The result is that:
I'm not seeing the 'low battery' warning dialog before the computer shuts down; and
(ii) I'm not able to save current work and close all applications when the battery's charge gets low, before the computer goes to sleep (because it just shuts down without warning)
Can I do anything about this? Is it just an unavoidable indication of declining battery performance?
My MacBook is 15 months old. Current 'battery information' is listed below.
Thanks. Replies appreciated.
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4792
Remaining Capacity (mAh): 4790
Amperage (mA): 0
Voltage (mV): 12477
Cycle Count: 23
------------------------------

stevenray1 wrote:
1. I'm not sure how to match the path you listed re: the '1.3 battery update' to what's on my MacBook. Maybe I just don't understand how to interpret it, but I don't have a root folder (or any other folder) identified as 'MacBook.' When I used Spotlight, I also didn't come up with a BatteryUpdater.bundle. A file named BatteryUpdate2007001.pkg was all that Spotlight turned up.
On my MacBoook my hard drive that I boot from is named Mort's MacBook. Yours may be similar I don't know. It is the drive you boot from. Mines shows in finder as the top level drive. The next level in column view. Then you find the System file and go from there.
If your not sure what you named your drive or which one it is click the apple in the upper left corner and then pick *About This Mac* You then should see *Startup Disk* and next to that the name is what you refer too when you look for the folder path I gave.
2. You recommended resetting the SMC. However, the info file you provided a link for says it shouldn't be "necessary except as a last resort in cases where a hardware failure of the power management system is suspected." Does that accurately describe the condition I reported? Also, the problems listed as possible reasons to reset the SMC don't include the one I posted about.
The reason I suggest resetting the SMC is that your changing one of the components that is controlled by the functions of the SMC. The battery is a big part of the system which the battery update changes. To get it to be sure to recognize the new bundle you reset the SMC. The instructions linked are not all inclusive but if you don't want to reset it that is up to you.
3. Similarly, re: the 1.2 Battery Update, it's not clear to me that any of the listed 'symptoms' of a faulty battery apply in my case -- unless what I reported indicates a "+low charge capacity/runtime+." Does it?
The battery update instructions are again not all inclusive. If you don't want to do it that is fine. All I know is you have a MacBook Pro update installed at the moment. You don't have a MacBook Pro. This suggestion of mine has helped many people with problems as reported by you. You do not have to do anything you don't want. That is your choice. Is your battery cutting off at 39% considered normal operating or capacity to you? I personally would call it a faulty battery, but thats just me.
What would be your definition of a faulty battery?
4. Apparently, you had a faulty battery which Apple replaced. I wasn't sure from your message whether you had other things going on that made it clear you had a faulty battery, or only the same symptoms I reported. Were there other power-related problems in your case, or only, as you wrote "the same thing as yours except mine cut off at 28%"?
I guess I misunderstood your original post, everything yours was doing mine was doing except mine cut off at 28% not 39%. I can only give advice on what you post. Are there other things happening that you didn't mention?
My idea of a faulty battery must be different than yours. If I don't get warnings I should and the battery does not work like it used to then that is a faulty battery in my opinion.
If your not comfortable with any of my suggestions contact Apple support and maybe they can help you. Possibly one of the other posters on here can give you different advice that you agree with. Never do anything advised in the forums unless you agree with it.

Plan costs calculation during results analysis of sales order

Hi Experts,
I am in process of implementing sales order costing. I am facing a problem during result analysis with plan costs data.
We have a sales order for which production order is generated. Cost object is sales order.
Say, sales order cost estimate which is the plan costs --> is $ 1000 (which includes prod order COGM of $ 600) (So remaining sales and admin costs are $ 400)
Plan cost of production order is $ 550 (as per production order cost analysis report)
While calculating the result analysis for sales order, system is calculating the plan costs data as $ 1000 + $ 550 = $ 1550
As a result, I feel plan costs data during result analysis is over calculated.
I feel either plan costs should be $ 1000 (as it already includes COGM part)
or
$ 950 which is (plan cost of production order $ 550 + sales and admin costs of $ 400)
Could some one explain me why result analysis shows plan costs data as $ 1500 and if I need to rectify how can I do so.
Thanks,
GAN

Any suggestions please.
Edited by: DSK on Feb 9, 2012 6:16 AM
Edited by: DSK on Feb 13, 2012 4:39 AM

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
The current release of Acrobat (XI) is compatible in Windows 7.
Be well...

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?

Try disabling your firewall; both on your PC and the external Firewall/Router.

Error with adautocfg.sh on the DB during final stage of upgrade

Hi ;
I have same issue like:
Error with adautocfg.sh on the DB during final stage of upgrade
i folled documents but somehow i cant recreate xml file
i use this:
cd <RDBMS ORACLE_HOME/appsutil/bin
perl adbldxml.pl
but nothing happen!! it doesnt do nothing!
i rename my xml file under <RDBMS ORACLE_HOME/appsutil/ but there is no new xml file!!
Is anyone know why?
Thanks

Hi hussein;
Those note solved my problem, but i have one other problem now.. when i try to create new context file by usng :
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
i have this error:
FOLLOWING ERROR OCCURED :
+3 >= 3+
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
Upgrade to DB 10g fails with error - cannot generate contextfile
i found note 369179.1, Note says i need to apply lastest autoconfig patch...
When i donwload patch 6372396 which is lasest patch number for r11( i sourced r11 env file), and try to apply patch to my system its gives me that:
AutoPatch error:
adprdf(): At line 3 in file u6372396.drv:
This patch is not compatible with your on-site release:
patch's intended release version and
on-site          release version
do not have identical major and minor version numbers (first two components)
patch's intended release is "11.5.0"
on-site          release is "12.0.4"
Processing line   10000.
Processing line   20000.
+24658 lines processed.+
AutoPatch error:
AutoPatch encountered errors parsing and loading the patch driver file.
+STRT_TASK: [Prereq checking logic] [] [Sun Jun 28 2009 09:04:57]+
So i decide to apply autoconfig patch 7237313 for r12, so i source r12 env file and then start path end its ended wihtout error
After i try to create context file by using this command again:
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
and have still same error :(
FOLLOWING ERROR OCCURED :
3 >= 3
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
so now what i have to do?
thanks for advice

Capacity check during Planned order to production order conversion

Hello Gurus,
I have a strange situation during capacity check.
While Converting the planned order to Production order, I release the order and I don't get any warning. All work centers are available
But for the same material/quantity/dates, if I create the Production order manually, release it, system check the capacity and I got the message the Capacity Over loaded (which is correct also as there are overload on the work centers).
My question is why I am not getting this message while converting the planned order to production order.
There are overload on the work centers and manual creation of Production order is working fine, but problem is during planned order to production order conversion.
For information, I have maintained Finite scheduling indicator in OPKP, capacity availability indicator "NO CHECK" is also blank in OPJK.
It will be grateful if you can please help me here.
Thanks in advance,
Sandeep Kumar

Hi KK,
Thanks for your feedback.
I have checked all these settings but still no success.
I am surprised but it is not a customizing issue I believe, because capacity is checked in Dev client while converting planned order to production order. I am facing this issue only in Staging client.
Master Data is same. In CM01, in Quality(Staging) client, it is showing overload. while creating production order, it shows overload but only when convert from planned order to production order, it does not show overload .
Please suggest what else I need to check.
thanks in advance.
Br,
Sandeep Kumar

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Has anyone ever dealt with this error code...during buring to DVD 2130932483??? I need help

Encore burns to DVD, not Premiere Pro... moving to Encore forum
These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Restricting certain plans from ESS during open enrollment

Hi Experts,
We have a requirement to restrict plans from ESS during open enrollment. Please let us know the best possible solution to acheive the same.
We have found that Proxy class CL_BENEFITS_AREAPAGE which is assigned to the service can be copied and enhacned to filter the plans, is this the right approach?

I had that exact same delima, but one of our consultants pointed us to the transaction: HRBEN00ADJRSN
This is a mass load of adjustment reasons. You just need to feed the program the total time allowed for adjustments and things like start of records date and end of records date. Because of the dates and the potential for different plans to have different dates, we actually have two open enrollment adjustment reasons. We have one for Flexible spending where I give the 1/1 begin date and a 12/31 end date since it is only effective for the year in question. Then we have our main open enrollment for all other plans where the begin date is 1/1 of the new year and 12/31/9999 for the endda. I then run the HRBEN00ADJRSN twice for the population: once for the flex enrollment, and then again for the main open enrollment adjustment reason.
DP

User exit during planned order to production order conversion

Hi,
Let me know if there is any user exit during planned order to production order production.
Regards,
Yogesh

Dear
You can try the following :
1.PPCO0001 /PPCO0007 /PPCO0012
2.BADI workorder_update
3.Check in SMOD or CMOD and enter PPC* -you will find all the related user exit
Hope this helps
Regards
JH
Edited by: Jiaul Haque on Oct 21, 2010 10:55 AM

My friend has an iphone with no data plan, how do i send sms messages without my own iphone trying to send an imessage

i have an iphone5 with a data plan, my friend has an iphone5 with no data plan,
how do i send sms messages to him without my own iphone trying to send an imessage
im sure we can tap on the message and select "send as text or sms"
but is there a setting that says 'if recipient has no data, then send as text' - so its more automated
almost like the setting that says 'if i have no data then send sms'.

I have an iPhone 5s with a data plan but I have iMessage turned off. Everyone I know with an iPhone has no problem sending me texts and they automatically go out as sms. If your friend doesn't want others to send messages via iMessage even when he has wi-fi access he can turn iMessage off in Settings > Messages. If that doesn't resolve the issue see the quote below from (ignore the non-Apple phone references): Can’t receive text messages on a non-Apple phone
If you don't have access to your iPhone, or if you can't deactivate iMessage from your iPhone, please contact Apple Support. Support for this issue is free.

Considering storage capacity constraint during planning

Hi,
How can we model the storage capacity constraint in SNP or PP/DS..?
The requirement is ,during planning the storage capacity constraint for storing the finished product in the plant needs to be considered.
Thanks
Ram

Hi Somnath,
Thanks for your response.
your answer was helpful.
Regarding the option which you are currently using in your project, I believe it will only shows the alerts. I am not sure if you are using this only to display the alerts. Could you please elaborate what action you take based on this alert..?
It will be helpful if you can briefly explain the requirement and how the same was mapped.
Thanks for the help.
Wishing you and forum members, a very hapy new year.
Best Regards,
Ram

With Scrap during planning, without Scrap during execution/backflush

Similar Messages

Maybe you are looking for