With the latest upgrade to 7.0.1 the Url's that appear on on the pull down of the URL bar, are in a different order and one that doesn't appear to have any logic to it. what determines the order?
In the past, the URL's used seemed to be in order of use. The sites I went to most often were at the top of the pull down list. Now they are jumbled.
FWIW, I find this feature to be very useful. I use it routinely as a very quick way to get back to sites I visit most frequently. I use the bookmark bar for secondary sites, and bookmarks for tertiary sites.
I followed the instructions in your first link, but I don't have a user.js file, and in any event, the instructions there aren't really relevant. The problem isn't that Firefox doesn't remember this setting, it's that I can't set Firefox to put a New Tab button on my Navigation bar in the first place because it's not in the list of items I can select. And yes, I've tried restoring the default set several different times with no effect. I know that the button exists, because I can see it on the copy on my laptop, even after the upgrade. The only thing I haven't tried (maybe) is disabling all plugins, so I'll try that and report back.
Similar Messages
-
Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.
You can take a look at this support document for troubleshooting iMessage and FaceTime activation. If you have difficulty activating FaceTime or iMessage - Apple Support
I believe with the iPhone, you need to have a SIM installed, since the activation sends an international SMS to servers in the UK. Check to see what that support document states. -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?
i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com -
My daughter and i use same computer she uses firefox and recently we have noticed on facebook apps we get the message This XML file does not appear to have any style information axxociated with it. The document tree is shown below
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Im using ReloadEvery 3.6.3 & Live HTTP Headers 0.16 plugin's for playin mobsters on myspace. After capturing the the script, editing & placing in the address bar I recieve a message: Failed Security. This XML file does not appear to have any style information associated with it. The document tree is shown below. There was nothing on the Tree. I know the script was edited correct cause it works on the other PC's. Operating system is win7 & Firefox is current. Thx.
== The first timeyea I got the same error for playing files on filestube and its just not that, ever since 2 days ago when I updated firefox everything have just started to ..uck up all the time, high cpu memory load without any addons and it wont terminate for another 20secs after I close it... I think I'll just reinstall with an older version, everything worked just fine then
-
I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas please?
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
what do you mean by the obvious?, it's a permission issue, ARD must run as systems administrator to boardcast, tunnel IPv6 calls, etc.
-
Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive. -
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
This XML file does not appear to have any style information associated with
Hi All,
I have IDOC to XML file scenario.
In SXMB_MONI, it showed the message processed successfully (checkered flag).
I open the payload in the target, I'm able to see the XML format without error.
then I checked in RWB the overall status is successful.
But when I checked the detail (message content) I got the following message:
"This XML file does not appear to have any style information associated with it".
So physical file created is like corrupted.
If using XML marker to open the file it show warning "Invalid Unicode Sequence".
The thing is when rerun the whole interface again, which is mean the same idoc send from the source, the file created successfully. Sometimes need to rerun twice or more than that to get the file.
Anyone has idea on what is wrong here?
Thanks,
Victor.Hi Baskar,
Thanks for your reply.
It's PI 7.0.
Overall status is successful but when I go to RWB to check the message content i got the error message above.
Target system is only normal FTPS server.
XML file is created as well but it's showing error when we open it.
The weird thing is without fixing anything if we rerun the same interface with same set of data sometimes the error is gone by itself.
Thanks,
Victor. -
This XML file does not appear to have any style information...
hello,
i am a new oracle spatial developer and also i am new in XML. i want to see the demos in oracle 10g enterprise edition. i imported the necessary dump files and i created the necessary user defined as mvdemo/mvdemo. when i want to see the demos in mapviewer, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geçersiz geometri.
Fri Feb 25 01:37:39 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
at oracle.lbs.mapserver.oms.doPost(oms.java:314)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
</oms_error>
for now, i dont know what to do.. if someone recommend any useful idea, i would be greatful.
best regards..hello,
thank you for your reply..
i made some changes and i dont see the errors that i mentioned above any more. but still some problems..
firstly, i decided to change the settings in the mapViewerConfig.xml file in order to add a new datasource. i copied it and that is the reason why you see the '!' in my explanation. the new situation in the mapViewerConfig.xml file like this:
<map_data_source name="mvdemo"
jdbc_host="c-0y5wp0jvd2bf8"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="nzKVD/KFZYkGc0uF7EL7/vPibuAPpQ9j"
jdbc_mode="thin"
number_of_mappers="3"
/>
"c-0y5wp0jvd2bf8" is my computer name. jdbc password was encrypted when i started the mapviewer. this is the new screen of the mapviewer after starting:
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.oms] oms root path: C:\mapviewer10
12_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\web\
05/03/01 17:49:58 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
initialized
05/03/01 17:49:58 INFO [oracle.lbs.mapserver.core.MapperConfig] using default co
nfig file: C:\mapviewer1012_qs\mv1012qs\oc4j\j2ee\home\applications\mapviewer\we
b\WEB-INF\conf\mapViewerConfig.xml
05/03/01 17:49:58 WARN [oracle.lbs.mapserver.core.MapperPool] destroying ALL map
maker instances.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Regi
on=SDOVIS_DATA.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] max_cache_size=32 MB.
05/03/01 17:50:17 INFO [oracle.sdovis.CacheMgr2] sub region sdovis_subreg_mvdemo
_jdbc:oracle:thin:@c-0y5wp0jvd2bf8:1521:orcl created in cache.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperPool] added a mapper ins
tance to the pool [data src=mvdemo]
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.core.MapperConfig] Map Recycling th
read started.
05/03/01 17:50:17 INFO [oracle.lbs.mapserver.oms] *** Oracle MapViewer started.
when i open the page ( http://localhost:8888/mapviewer/ ) and press the submit button of the "sample map request" section to see the result of the demo, i come accross this error:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<oms_error>
Message:[XMLHelper] xml eÅleme isteÄi incelenirken hata.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:[XMLHelper] xml eÅleme isteÄinde geçersiz geometri.
Tue Mar 01 17:53:51 EET 2005
Severity: 0
Description:
Message:GML Geometry type Point not suppoted.
Description:
at oracle.sdovis.JSDOGeometry.fromNodeToGeometry(JSDOGeometry.java:3185)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.parseGeoFeature(XMLHelper4Mapper.java:712)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:223)
at oracle.lbs.mapserver.core.XMLHelper4Mapper.convert(XMLHelper4Mapper.java:167)
at oracle.lbs.mapserver.oms.getMapRequest(oms.java:678)
at oracle.lbs.mapserver.oms.doPost(oms.java:314)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
</oms_error>
in addition, i use firefox as my default browser. however, i tried it in the iexplorer also but gave the same error again.
i look forward to taking a response. thank you very much for your care again.
regards -
Does Arch have any tool to check what services needs restart?
Does Arch have any tool to check what services needs restart after software update just like `checkrestart` from Debian flavoured distros or `needs-restarting` from Red Hat ones?
Maybe there is some other temporary file that is not a library but deleted that slips through. I got my awk version now to replace my old hack code.
__pids="$(sudo lsof -F pfn |
awk '
/^n/{
# if this file is a deleted library or binary, show it
if (del == 1 && match($0, "bin|lib")) {
print pid;
del=0;
del = 0;
/^fDEL$/{
# the next file is deleted
del = 1;
/^p/{
# we check a new process
del = 0
pid = substr($0, 2)
}' |
sort -un |
paste -sd ' '
)" && [ -n "$__pids" ] && ps -p "$__pids" && unset __pids || unset __pids
Edit: Reorder logic, don't execute ps if no processes are found.
Last edited by progandy (2014-06-12 16:42:27) -
some excel items have appeared on my desktop and they cannot be deleted, does anyone have any idea on this?
Hi, cannot drag to trash, get a message saying the item cant be moved to trash because it cant be deleted. I really dont know what theses are. The icon shows as excel but they are certainly not filenames I have used. I cant open them either and they dont show in finder under desktop but they are clearly sitting there!
Maybe you are looking for
-
I use filehippo.com to automatically update my applications. So I have Mozella 3.6 and then recently downladed and installed Adobe Flash player 10.1 or the latest version. I then proceed to http://www.africam.com/wildlife/lc_player_chat.php?sh=nk-1 a
-
Link Customer Return order and Quality Notifcation
Hi Experts, After serveral rounds of investigation and interacted with SAP, I though to post it here to get abest answer for below question. I hope I will get it from you guys as soon. When we create return sales order through Function -> Sales orde
-
Applying a gradient to my object results in a tiled pattern.
Hi, I'm not sure how to explain this, and have had trouble trying to find help because I don't really know how to describe what's happening. I created a diagonal gradient that I applied to a rectangle with rounded corners. I added the gradient to the
-
Adobe Acrobat - rename form field
I'm a newbie to Automator but it seems like this should work. I need to automate the renaming of lots and lots of fields in a form. I started a workflow that opens the PDF. Then I used the "Record" button in Automator to watch me click on the Form me
-
Where is the orignal account picture stored?
I want to keep the one I took while setting up my machine, but can't find it in the pictures/photobooth (or iphoto), or in library/cache. I took a new account picture but want to change back. When I run a spotlight search for "photo on" (the beginn