With the new IOS6 the 'group' of contact disapear

Sorry for my poor English.
With my  I-phone 3GS and IOS 5 I see all my contact >1'200 ! classified en 21 groups
It's very easy to find soemone because with IOS5 i select the group and I see quickly the name inside
Now with IOS 6 i lose the 'hierarchy' of group and i must to throw 20 groups to see onyl one group.  It's very very complicated and afet i must seleclt again the 20  group etc.. etc...for me  It' impossible to use this IOS
With the IOS 5 it' very naturel and easy
Question It' possible to change IOS 6 to 5  to for restaure this important possibility ?
On my PC with the outlook software stay in normal position with group. :-)
Thank you for your help
Claude
Switzerland (French)

http://www.imore.com/ios-6-preview-siri-ipad

Similar Messages

  • How do I sync my calendar and contacts with the calendar and contacts on my phone? My laptop is Mac OS X, 10.6.8 and still has MobileMe on it.

    My MacBook Pro is a few years old and I recently got an iPhone 4S. I want to know how I sync my calendar and contacts with the calendar and contacts on my phone? My laptop is Mac OS X, 10.6.8 and still has MobileMe on it. I tried to download iCloud but then I'd have to download and pay for a new OS.
    If anyone could help me with this that would be great.

    Hello Fiona,
    Congratulations on your new iPhone!  You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected.  Use the steps in the following article:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/ht1386
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

    Hello
    I have Lync 2013 and 2010  , still i didn't finish my migration completely from 2010 to 2013 .this  is  coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
    There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013  front end and backend server's .
    later on after restarting both the front end and the back end server's i start having hundred's of  these error's related to "LS Call Park Service".
    so any advice for these issue ? and what is the effect for these error .
    below is the error I got .
    The database being used by Group Pickup is not the appropriate version.
    The database is not the correct version:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
    Actual...   SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
    Cause: The database has not been upgraded.
    Resolution:
    Upgrade the database to CU1.
    ==============================================================
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    =============================================================================
    Kind Regards
    MK

    Hello
    thanks Holger for u r replay .
    due to the Microsoft article about the cu :
    I run only :
    Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase command to apply the changes.
    here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
    PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
    VERBOSE: Install databases required by Lync Server role(s).
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is DbState_RequiresMinorUpgrade.
    Database rtcxds set to mode Restricted.
    Dropping all procedures, functions and views from database rtcxds.
    Executing RtcDb.sql...
    Adding master role...
    Setting owner for database rtcxds to sa.
    Creating login MyDomain\RTCHSUniversalServices.
    Creating user MyDomain\RTCHSUniversalServices.
    Creating Schema MyDomain\RTCHSUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
    Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
    Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
    Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
    Setting the database rtcxds to multi user mode.
    Database rtcxds is set to multi user mode.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcshared.
    Database created by script "RtcSharedDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
    VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    Checking state for database rtcab.
    State of database rtcab is DbState_RequiresMinorUpgrade.
    Database rtcab set to mode Restricted.
    Dropping all procedures, functions and views from database rtcab.
    Executing RtcAbTypes.sql...
    WARNING: Warning: Failed to execute batch --
    -- Copyright (c) Microsoft Corporation. All rights reserved.
    exec sp_addrole N'ServerRole'.
    Executing RtcAbDb.sql...
    Setting owner for database rtcab to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
    Setting the database rtcab to multi user mode.
    Database rtcab is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
    VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    Database created by script "RgsConfigDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    Database created by script "RgsDynDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    Checking state for database cpsdyn.
    State of database cpsdyn is DbState_RequiresMinorUpgrade.
    Database cpsdyn set to mode Restricted.
    Dropping all procedures, functions and views from database cpsdyn.
    Executing CpsDyn.sql...
    Setting owner for database cpsdyn to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
    Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
    Setting the database cpsdyn to multi user mode.
    Database cpsdyn is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
    VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    Database created by script "ArchivingDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
    VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    State of database LcsCDR is DbState_RequiresMinorUpgrade.
    WARNING: The database LcsCDR being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
    WARNING: The database LcsCDR being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
    Database LcsCDR set to mode Restricted.
    Dropping all procedures, functions and views from database LcsCDR.
    Executing CdrDb.sql...
    Setting owner for database LcsCDR to sa.
    Creating login MyDomain\CSAdministrator.
    Creating user MyDomain\CSAdministrator.
    Creating Schema MyDomain\CSAdministrator.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
    Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
    Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
    Setting the database LcsCDR to multi user mode.
    Database LcsCDR is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing CdrJobs.sql...
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    State of database QoEMetrics is DbState_RequiresMinorUpgrade.
    WARNING: The database QoEMetrics being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
    WARNING: The database QoEMetrics being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
    Database QoEMetrics set to mode Restricted.
    Dropping all procedures, functions and views from database QoEMetrics.
    Executing QoEDb.sql...
    Setting owner for database QoEMetrics to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
    Setting the database QoEMetrics to multi user mode.
    Database QoEMetrics is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing QoEJobs.sql...
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
    VERBOSE: No changes were made to the Central Management Store.
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    PS C:\Users\MK>
    I hope some one can confirm no issue with what I did ??
    Kind Regards
    MK

  • Error : There was a problem communicating with the Group Pickup backend database.

    Hi , 
    I found this error in Event viewer for Every 2 min on lync server 2013 :
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    what can i  do ?

    Hi,
    Did you solve the issue with the help of the suggest Anthony provided above?
    If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
    then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

    Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?

    You would need to have enabled iCloud on your MBP. Your question indicated you did not.
    Its serial number is useful for establishing ownership should the MBP be recovered. File a police report.

  • Pass group values as a Comma seperated values with the grouping scope.

    Dear all,
    I am creating a report which is matrix and drill through
    here a look..
    where i have a JIT Division group and its total 86  when i click on 86 i must pass the child group values
    Stage_group ie. MMS,RMMS,RRMMS which are 7,8,9 respectively.
    How to pass a values of Stage_group i.e
    mms=7,RMMS=8,RRMMS=9 as 7,8,9 to get total of all
    Dilip Patil..

    Ideally this is done as below
    You will have two parameters defined in the drillthrough report one Division Group and other Child Group both of which would be optional. So cases where you navigate from subtotal rows you will be passing only the Division Group parameter value which will
    bring all the child group details (ie 86 records for JIT). When you click on the detail rows you pass only the relevant child group) ie like 7 for MMS,8 for RRMMS etc) as value for child group parameter in which case it will do filtering based on child group
    and return you only relevant child group records. So best option would be to make drilldown report as this if possible ie having two level parameters which are optional - Division Group & Child Group
    If that not possible then another way is to make a single parameter called child group which would be
    multi valued. While navigating from detail rows pass relevant child group ID alone and while navigating from Total rows pass all related child ids as delimited list ie like 7,8,9
    for this you can use an expression as below
    =Join(LookupSet(Fields!DivisionGroupField.Value,Fields!DivisionGroupField.Value,Fields!ChildGroupField.Value,"DatasetName"),",")
    I've given some generic field names as I dont have any info on your dataset so make sure you replace it with the correct names.
    Also make sure the query behind/filter expression in the drilldown report is implemented to accept multiple values
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How do i synch my i phone with a new computer without losing my contacts '

    how do i synch my i phone with a new computer with out losing my contacts'

    the problem is i have never had my contacts on a computer they did it at the  apple store

  • What is wrong with the iphone 4 contacts?

    On the 3gs there is an alphabet that goes down the right side of the screen and the contacts are all kind of displayed in alphabetical order with their corosponding letter above that group(like the ipod artist and song view). but on the iphone 4 there is nothing, just all the contacts bunched up? Is this normal?
    Message was edited by: Michael0320

    mine are in alphabetical order and have letters going down the side seems like you have a software glitch
    first thing I would try is rebooting hold the sleep/wake switch and home button until you see the white apple logo appear
    if that doesnt work restore from backup and see if its fixed and if that doesnt work restore as new not from a backup and see if its fixed
    all that fails you may need to take it into a apple genius bar

  • I was playing with the Group Tabs/Panorama function and accidentally closed all of my tabs. Then I closed the browser window. Is there any way to restore all my tabs?

    I'm using Firefox 6.

    I have the same issue and didn't even close my browser. I closed a tab group, and they're ''gone''. I've always used ''warn me when closing multiple tabs''; why didn't it prevent this?
    I dutifully updated to 6.0.1 (Win7 Pro 64bit SP1) today, and saw "''Tabs, meet groups''." I played briefly with a group and then clicked (x).
    While exploring the UI, I had assumed I was manipulating a filter rather than the actual tabs. No reason to suspect this would close an entire window's worth. The "restore tab group" button suggested I'd merely ungrouped the tabs. No biggie; new feature playtime is over for now. The background blur was still present, so again no worry that my six or eight tabs were about to be annihilated.
    The recently closed window list includes three pages from yesterday. Naturally the recently closed tabs ''from the other window'' aren't here.
    My full history is sorted by visit date; why isn't each tab added to today's list after a restart? Now I'll search the entire history to ensure I'm not forgetting one. Tab groups are likely quite nifty, but for now I'm irritated with 'em.
    '''Why didn't "''warn me when closing multiple tabs''" kick in''' to alert me?!
    SUGGESTION:
    '''''Warning:''' The 'tabs group' feature does not care if you've checked "warn me on closing multiple tabs." If you click the (x), you're hosed.''

  • I havea 4g iphone and want to sync the data from my phone onto my computer. I am able to  sync data from phone onto the computer  (with the exception of contacts, notes,  and email. Will purchasing Icloud help me? I dont have the latest IOS software.

    Hi.
    I have a 4g iphone without the IOS software ( or the latest version of it.) I have exhausted the devices that I can exchange info. on  which I believe is 5. 3 o out of the five broke. I am able to sync my phone and get apps, books, and music (thankfully from my phone to my latest computer, but not vice versa. In order to update and downlaod the IOS software it says I need to back up all of my info. Will purchasing the latest subscription of icloud 24.99 per year help me or should I just excpet that I will lose my lateset notes, text messages, and contacts through the update. I also want to make sure that after I update, I will be able to get all of the info back onto my phone. Any help would be greatly appreciated.
    Thanks.

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    When associating a device with an Apple ID see the following regarding the 90 day limit.

  • May the groups of contacts be restored on Nokia 66...

    Hi,
    I have a Nokia 6680.
    I want to format my phone because of some problems(bad function). I have too many contacts saved on it. I managed them through their groups. How can I back up them (including their groups) to restore them after format?Some said me that this is not supported by Nokia. However, I thought such a precious company may not forget such a problem!
    Please, help me on this.
    Thanks in Advance.

    Thanks for your reply. 
    I don't know if PC Suite does it or not. However, PC Suite does not work full-functional on the 
    phone(as it says!!!). It says "PC Suite Support is not installed on the phone" and it requests me 
    to use the help menu to install it on the phone! While using the menu, it shows a message that 
    the PC Suite is up-to-date!
    Therefore, I can not use the "Nokia Content Copier" to create a backup for this. First, it warns 
    me that it only can create a phone specified backup that can only restore to the same phone. 
    After accepting it, it starts to create backup. However, it gives an error on the last stage of 
    creating a phone specified backup. The error message is as below:
    "A fatal error occured during the backup. Error code: 0x80400005"
    And the log is as below:
    Backup log:
    Date and time: 2009/03/30 22:34
    A fatal error happened during the backup operation. The backup file could not be saved.
    Please, help me to solve this too!

  • HT4061 i updated iphone 4 with the software update ios7. i cannot get phone to restore i am stuck with a black screen or a screen with the apple ico that disapears and then the icon of itunes and the usb icon.  Itunes is not picking up my phone to even re

    cannot restore phone since update.  I tried to upload to itunes but itunes isnt picking it up. Phone is frozen with Itunes icon and the usb cord.  I tried some suggestions posted but it is still not restoring does anyone know how this can be fixed???
    Thanks

    Hello reneywacky,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
    Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
    iTunes should automatically open and display the following message:
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
    Use iTunes to restore the device.
    Best of luck,
    Mario

  • Software with the new ELPH 520 HS called Imagebrowser & Zoombrowser - both do not work.

    Just bought new ELPH 520 HS at COSCO.  Liking the camera. Just installed the software off the CD onto a laptop/Win7. No apparent problems.  But neither program will execute.  Each one seems to startup and get busy and then a message appears in the middle of the screen about how there is a problem.  then nothing.  I have retried it many times.  No success.  Whatever happened to Plug & Play.   TIA for your help in this regard.

    Hi Canon1008,
    For assistance with the software, please contact us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I see the group that my contact has been assigned  to when I view the individual contact card?

    I have added my contacts to specifics groups via icloud. I want to be able to see the group my contact belongs to when I bring a contact up (either on my iphone or on icloud).  How can I get the "Group"  the contact has been assigned to to show on their contact?

    what do you mean by game-state
    PS: i asked this question and they told me to be more specific.

  • Security issue with the SGA and multiple installation group.

    Hi,
    Documentation ARE WRONG:
    http://download.oracle.com/docs/cd/E11882_01/rac.112/e10743/preparing.htm#TDPRC131
    # useradd -u 1100 –g oinstall -G dba -d /home/oracle -r oracle
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10816/typinstl.htm#CWSOL156
    # useradd -u 1100 -g oinstall -G dba oracle
    The "-g" and "-G" must be exchange!
    In an advanced installation with multiple Oracle users call them ( ora1, ..., orai, ..., oran )
    with multiple OSdba group defined users call them ( dba1, ..., dbai, ..., dban)
    Associate each oracle user to a dba group with the same number and the install group as oracle told it.
    User ora1 group dba1
    User orai group dbai
    User oran group dban
    Now make the software installationS with the group OSinstall ( install) as written in the documentation, in 3 Oracle_home
    Call the oracle_home1, oracle_home2, oracle_home3
    Now check semaphores, Sharedmemory and files!
    ipcs -msa
    IPC status from <running system> as of Thu Apr 29 12:14:06 CEST 2010
    T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
    Shared Memory:
    m 16777246 0x6525858 rw-rw-- oracle2 install oracle2 install 36 5368725504 3479 4298 12:10:01 12:10:31 16:30:45
    T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
    Semaphores:
    s 50331701 0xb7892c1a ra-ra-- oracle2 install oracle2 install 202 16:30:47 16:30:45
    s 50331700 0xb7892c19 ra-ra-- oracle2 install oracle2 install 202 no-entry 16:30:45
    s 50331699 0xb7892c18 ra-ra-- oracle2 install oracle2 install 202 12:13:48 16:30:45
    ls -l $OSD/oradata/*/*/* | sed s/oracle/oracle2/
    -rw-r----- 1 oracle2 install 11600384 Apr 14 18:30 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wcsdcfh_.chg
    -rw-r----- 1 oracle2 install 11600384 Apr 15 15:08 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wf7787k_.chg
    -rw-r----- 1 oracle2 install 11600384 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wg8jggf_.chg
    -rw-r----- 1 oracle2 install 16695296 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/controlfile/o1_mf_5wg4j9go_.ctl
    -rw-r----- 1 oracle2 install 524296192 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_aud__dol_5wg4mntr_.dbf
    -rw-r----- 1 oracle2 install 104865792 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_aud__dol_5wg4mp3v_.dbf
    -rw-r----- 1 oracle2 install 209723392 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_example_5wg4ml5z_.dbf
    -rw-r----- 1 oracle2 install 419438592 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_stat_dba_5wg4mmhg_.dbf
    -rw-r----- 1 oracle2 install 2097160192 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sys_undo_5wg4kf8n_.dbf
    -rw-r----- 1 oracle2 install 2097160192 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sys_undo_5wg4lss2_.dbf
    -rw-r----- 1 oracle2 install 1363156992 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sysaux_5wg4k1xf_.dbf
    -rw-r----- 1 oracle2 install 1048584192 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_system_5wg4jp26_.dbf
    -rw-r----- 1 oracle2 install 209723392 Apr 28 22:01 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_temp0_5wg4l302_.tmp
    -rw-r----- 1 oracle2 install 209723392 Apr 15 16:06 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_temp1_5wg4lsod_.tmp
    -rw-r----- 1 oracle2 install 104865792 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_users_5wg4l33f_.dbf
    -rw-r----- 1 oracle2 install 104858112 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_1_5wg4jb44_.log
    -rw-r----- 1 oracle2 install 104858112 Apr 28 21:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_2_5wg4jdn6_.log
    -rw-r----- 1 oracle2 install 104858112 Apr 28 22:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_3_5wg4jgw8_.log
    -rw-r----- 1 oracle2 install 104858112 Apr 29 03:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_4_5wg4jk64_.log
    -rw-r----- 1 oracle2 install 104858112 Apr 29 13:01 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_5_5wg4jmcd_.log
    ls -l $OH/bin/oracle | sed s/oracle/oracle2/
    -rwsr-s--x 1 oracle2 install 256263032 Apr 14 13:54 /app1/oracle/product/11.2.0_64/db_1/bin/oracle*
    That the evidence the documentation provide you a wrong way to do it!
    François LANGE

    The right document syntax for this is:
    UNIX: Do I Need To Use The "oinstall" Group? (Doc ID 463052.1)
    FRançois

Maybe you are looking for

  • Java.awt.Image getWidth() and getHeight() not working!

    Right- this is want I want to do. I have a background image which is added as a background image to a third party API class which extends Java.awt.Container. Such container is then added to the Content Pane of MyClass (which extends JFrame) I want to

  • Usage of sed question for experts

    I need a little help with sed.  Basically, I need to parse out selections from the output of hddtemp so conky can display some hdd temps for me.  I have hddtemp in daemon mode so A simple 'nc localhost 7634' displays the following: $ nc localhost 763

  • Unable to add collector

    hi, I have installed Audit vault Server and Agent on different machines successfully. I have also added the source to Audit vault...but now when I try to add collector with command: ./avorcldb add_collector -srcname TOT -agentname Agent123 -colltype

  • Transfering Pics

    How do I get the pics off my old SD card onto my phone I have the old SD card in my phone now so I can have my pics how can I put them on my phone so I can put my new SD card in & save them to the new card ?

  • Make I channel mono 2 channel?

    I have a Hi8 video that only has audio in the left channel, right is blank I don't want to re-digitize but just dupe the left and put it to right channel, please advise thanks