With the Position Number can we find other positions in the Org Unit

Hi,
With a particular position number can we find other postion in the same Org. Unit.
The other postion is not a reporting postion of others.
I repeat if I give a postion number which is not a reprting manager position but still I would Like to find the other position in the Org. Unit.
Or which Evaluation path is used for it.
Thanx in Advance.
Regards,
IFF

Hi,
In the present scenario I just know only the postion of the employee,
I just want to know the evaluation path wrt position by which I can find all the positions associated with the same org unit wrt to the known position.
I just want to pass Otype as S positon in the FM RH_STRUCT_GET , and get the all positions associated with Org. unit wrt to known position.Please let me know the evaluation path.
Regards,
IFF

Similar Messages

HT4812 I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced.

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced. Any suggestions?

I'll guess you've already discovered the answer to this, but just in case:
Reminders works with Outlook tasks by syncing with iCloud, or through Exchange. You can't sync iOS Reminders with Outlook Tasks via USB/iTunes (like you can do with Notes, Calendar, Contacts).
So the marketing material on Reminders is a little misleading in that it's not specific enough -- there is no syncing without one of those intermediary systems mentioned above.
On a side note, syncing Tasks/Reminders via iCloud is not very good in my opinion:
Requires that you sync to the cloud, even if you have no other use for storing personal data in the cloud.
Requires that the iCloud Control Panel be installed on your PC (not sure about Mac).
After syncing, you'll find new Calendar and Task groups called "iCloud" have been created in Outlook. The calendar groups appear to be created even if you're only syncing Tasks/Remminders (not sure why).
Reminders are stored in the new group (noted above) called "iCloud" rather than in your default Tasks group. This seems to me to be a sort of "parallel" sync, rather than a true sync with Outlook. There are oter implications of your synced tasks being in the new group that I won't go into here, but you can search the interwebs to learn more.
In my own case, I tried iCloud syncing, decided that I didn't like it for the reasons stated above, and then uninstalled (Control Panel and new Outlook groups) with no apparent ill effects.
Though I don't guarantee you'll have the same results, it might be worth a try to see if it suits your purposes.

I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanks

No one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

HT1353 By the serial number can I find out what generation iPod touch

By the serial number can you find out what generation your iPod touch is??

Hi stedman, getting back the generation number when inputting the serial number is a new offering on the warranty checking page, isn't it?
Very useful though. That should put a stop to the "8GB 3rd gen" merchants!
Double !

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

Meg81 error 214 indicates a download data validation error. This means that the update you downloaded became corrupted likely during the download process. I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
You can also find information on how to review your download logs which may provide additional information regarding the failure of the download.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

HT1349 My Ipod was stolen and was not registered but was joined with an iTunes account can i find it?

My Ipod was stolen and was not registered but was joined with an iTunes account can i find it?

If you did not configure FindmyIPod on it, I'm afraid you are out of luck. Report the theft to the local authorities and change the passwords to any and all accounts you have may used/accessed or configured on the iPod Touch.
Reporting a lost or stolen Apple product
B-rock

EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years,

EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years, I have installed 3x with removing old install. I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

Tcode to find the availability of temporary positions for specific org unit

Hi all,
What is the tcode to find the availability of temporary positions for specific org. unit??
Thanks
Jerry

PPIS
this tcode select the orgunit and positions once

I just bought a macbook pro. I was told by several people that it should have came with iMovie but I can not find it.

I just bought a macbook book pro. I was told by several people that it should have come with iMovie. I can't find it anywhere and it does not come up when I search for it. Someone else said that if it is not already on my computer I can download it for free? Please help! I would like to use it to burn some of my videos onto dvd.

Yes, your MBP should definitely have come with iMovie. If it doesn't have it, contact Apple directly and ask them what to do.

HT4783 AirDrop can't find other macs

AIrdrop on my iMac can't find other iMacs

MacBook Pro 2.2 GHz Intel Core Duo i7
and
iMac 3.06 GHz Intel Core 2 Duo
Air drop seems to work intermittently.
Thanks for any help.

Evaluation path to get personnel number all the org unit and subordinates

Dear all,
I have OM issue to ask.This is the scenario:
Staff A belong to org 1. Under Org 1, I have org unit 1-A, 1-B and org unit 1-C.
Issue 1 :
I want to run report(RHSTRU00) to to generate all the staff number in org 1 (Include 1-A, 1-B, and 1-C).
Issue 2 :
I want to run report for 1-A, only staff belongs in org 1-A appear.The others not appear.
I was understanding I have to play around with evaluation path. Until now I can't find the suitable evaluation_path. I need your help.tq

Hi,
Not sure why you want to reinvent the wheel. The standard report RHXSTRU02 will give you people by Org Unit. Just enter the Org Unit ID number and you will get the employees as output.
If you still want to use RHSTRU00, you can use O-P or O-S-P to get the employees and the positions.
Paul

Find emloyee of the org.unit

hi,
i table itab with org.unit and i wont to find the emp of the org.unit how i can do that?
Regards

Hi
You can write your select statement as follows:
This select will retrive all the positions which *belong to the given org unit into itab *t_orgpositions.
Select objid
from HRP1001
into table t_orgpositions
where otype = 'S'
     and plvar = '01'
     and rsign = 'A'
     and relat = '003'
     and istat = '1'
     and begda LE sy-datum
     and endda GE sy-datum
     and sclas EQ 'O'
     and sobid = 'XXXXXXX' (your org unit).
Using the above positions fetch the holders of these positions (PERNR) using the below query.
IF NOT t_orgpositions[] is initial.
Select sobid
from HRP1001
into table t_pernr
for all entries in t_orgpositions
where otype = 'S'
     and objid = t_orgpositions-objid
     and plvar = '01'
     and rsign = 'A'
     and relat = '008'
     and istat = '1'
     and begda LE sy-datum
     and endda GE sy-datum
     and sclas EQ 'P'.
ENDIF.
In this way you can get all the Personnel numbers which belong to an Org unit.
The other method is you can use some function modules to retreive this data. Get back if the above query does not serve your piurpose.

With the Position Number can we find other positions in the Org Unit

Similar Messages

Maybe you are looking for