With version 3.6.3 I can no longer do a right click with the mouse and check the properties of a live url link on web pages
Windows XP Pro, SP3. Firefox 3.6.3. Ever since updating to this version a few weeks ago I can no longer do a right click of the mouse and check the properties of an active url link on webpages. I've always had the option before. I want this feature back!!!!
In Firefox 3.6 Properties has been removed from the right click context menu.
You can use ''View Image Info'' or ''View Page Info'' in the right click context menu to see the (image) properties.
You can use the above mentioned extension (Element Properties 6) to get that context menu item back.
See also Link And Forminfo: https://addons.mozilla.org/firefox/addon/6939
Similar Messages
-
Re: magic mouse
I use Mavericks and I notice that when I put my mac to sleep and have my magic mouse on and when i go to wake the computer up with the mouse on my wi-fi will not connect?
Put if i shut off the magic mouse and put the computer to sleep and turn my mouse back on and wake the computer up the wi-fi connects, this is a bit strange. This there anyone out there with same problem? is this a Mavericks thing that is not working with the apple magic mouse?
Interested in hearing from you.
ThanksMr. iPadfan wrote:
... does my iMac model... support Hibernatemode 3 alias "Safe Sleep" to protect my Mac against damages due to power outage?
You can set hibernate mode to 3, but it seems to me its only benefit could be if power were to be lost after the iMac was already sleeping. Sleepimage is written to disk prior to system sleep. If your iMac lost power while it was "awake" you would certainly lose any unsaved work no matter what hibernate mode you choose.
The problem is that an iMac without power no longer sleeps, it's dead. Upon restoring power you need to cold boot, and I seriously doubt sleepimage can be forced to load in that event. Sleepimage is loaded upon wake from "safe sleep", not from boot as far as I know.
It is simple enough for you to try, so go ahead and see if it does what you want. Other than creating a 16 GB sleepimage file it did not appear to do anything beneficial on the iMac I am using though (a later model).
The file location is /private/var/vm/sleepimage
Configure hibernatemode, verify the file is created, do some work on your Mac, don't save it to disk (and don't use Pages or similar app that saves work on its own), let it sleep, then pull the plug. I think you will see what I mean. -
With version 9.0.1 I can no longer switch between Google accounts properly
I have a personal Google account and a Google apps account (via my employer, with a custom domain). I normally can log into either one and switch between the two using the "switch accounts" function. This currently works in chrome, and worked in Firefox until I received an upgrade to v9.0.1 today. Now the option to access the other account just isn't there anymore.
This feature is accessed from gmail by clicking on my name in the top right nav bar and choosing "switch accounts". You must have this feature turned on in the settings for both accounts to make this work. I use this to, for instance, read all my mail in one account and use the calendar or docs from the other one.
Anyone have the same experience? Anyone have a suggestion as to why or a solution?Thanks for confirming things Vivek.Wilfred.
FYI, for future others with this problem: After a couple hours of playing around it was fixed, though I'm not sure what finally did it. Be sure that you try Google's "Sign Out of All Accounts", and not just the regular sign out option. -
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
http://mensshoes.bizrate.co.uk/brand--crocs/products__att259--625463-.html
click on ''go to store'' and nothing happens.
http://www.screwfix.com/prods/60215?cm_mmc=Campaign-_-E11W05-_-A6-_-DigitalAerial
click on ''Enlarge Image'' and nothing happens
this is just two of many other web pages this happens.Please can someone end my misery?I followed the instructions for clearing the cache down to the last click "Clear Now" and just like when I click on many links/buttons in FF, NOTHING happened. (Although, sometimes clicking on a link/button makes the page I'm on reload instead of taking me to intended destination.) Now what?
-
I have an iphone 3g with version 3.1.2..can i update it to higher version?how do i update it?
i have an iphone 3g with version 3.1.2..can i update it to higher version?is it possible to update its iOS?how do i update it?
An iPhone 3G can run up to iOS 4.2.1. To update:
- Ensure that you're using the latest version of iTunes.
- Connect your device to your computer using the included USB cable.
- After iTunes opens, select your device when it appears in iTunes under Devices.
- Click "Check for Update" in the Summary pane to check for available updates.
Regards. -
I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?
What version of Premiere Elements and on what computer operating system? Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos? ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats? MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374 -
I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?
Hello Josephene,
Welcome to the Apple Support Communities!
I understand that after recently updating to the most recent versions of Mac OS X and iTunes. To troubleshoot iTunes Wi-Fi syncing not working as expected, please work through the suggested steps located in the attached article.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
Have a great day,
Joe -
I can no longer find my apple TV with my iTunes, need to pair them, suggestions?
Hi, I can no longer find my Apple TV with the new version on iTunes (i'm on OS X) on my computer, I need it so I can pair the Apple TV and iTunes account, any suggestions?
Thanks!if it's an appletv 1g then you should go to settings on your appletv and remove the bind with the computer
and then set it up again
if it's the small black appletv then you don't pair them from itunes you only use it as airplay speaker and the atv access the itunes shared lib -
Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?
when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN -
Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of them say they have Flash player on their PC and somehow they still can't hear, some say their Google Chrome browser tells them they've already got one flash player while they try to download one. For me, I had to download two versions of Flash player to be able to access to the audio. I don't know what the problem is, is it because it's the latest version of Adobe Acrobat XI pro that people with older version of Adobe reader or flash player can't open it properly? Or is it something else? How can I make sure every customer with different system can access to my books? Hope to hear from you ASAP! Thank you very much.
And how are the customers accessing the PDFs?
What devices are they using?
What program or apps with versions are they using?
I this age of other then PDF eBooks formats and reader program and apss for computers and mobile devices for these formats I would look at creating the books in one or more of the eBook formats.
Google Chrome and FireFox both have their own version of a PDF reader plug-in and they are well known to be less capable than Adobe Reader. It is possible to configure these products to use Adobe Reader. -
am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.
The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?
What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible? -
Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???
Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519 -
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
Maybe you are looking for
-
Error in XI server: JCO_COMMUNICATION_FAILURE in Message Mapping
Hi all, I am unable to execute even a simple scenario on my server. The status of the message in moni is random. I get either "Scheduled for outbound processing" in,or the following error(in Request Message Mapping): SAP:Error xmlns:SAP="http://sap.c
-
My iphone 4s keeps saying to many files open when i try download an app
when i try update my apps its saying to many files open but i have no open files!
-
Inner classes in my interface - ok, no k, indifferent?
I have an interface and a set of ComparatorS which are only used for objects which implement the interface. So I put the ComparatorS in the interface like so (not actual code because it is for my job): public interface Abc { //Class loader should o
-
Name search with and with out case sensitive including * also.
there is an urgent reuirement for name search . i am having 6 fields all are related to name like name prefix ,firstname, lastname etc. now i want select query so that i can search the person name with case ,with out case sensitive and ' * ' also. an
-
Maintain back ground activity while file dialog pop is open
If i use a labview pop for example file dialog pop up and i put in an event stracture,the event case doesn't come back to the timeout case till the user closes the pop up(it could be by clicking ok or cancel)..is there a way of making it that as the