With version 6 upgrade takes forever to load. Most sites never load completely-missing graphics and images. Using Google Chrome solves problem.

This problem occurred after upgrade to Firefox 6. Did not have it with version 5.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
You can try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a more modest setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

Similar Messages

  • No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

    No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
    I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I updated firefox on my laptopn and now it takes FOREVER to open EVERY site and i have run nortons to make sure i don't have a viris. it happened as soon as i did the update

    As soon as I updated firefox, as prompted, it takes FOREVER to open a site, including when i first open firefox. Should I uninstall and then reinstall?

    Hello, could this be it?
    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
    http://support.apple.com/kb/HT5559

  • I can enter a webadress in the adress field but when I hit enter nothing happens, If I press with my mouse on the side for the site to load it loads perfectly but enter pressing is non-responsive

    I can enter a webadress in the adress field but when I hit enter nothing happens, If I press with my mouse on the side for the site to load it loads perfectly but enter pressing is non-responsive
    I use FF4

    Please re-post in the Office for Mac Product Forums hosted by Microsoft.

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

  • I have o s x 10.7.5 using hp laser jet all in one 3050 printer. when using google chrome I can't print. works with safari.

    When using google chrome I am unable to print from this search engine. I can print from Safari.

    If the printer works with Safari and other programs, then the problem is with Chrome. Ask their tech support for help.

  • Flash Player won't load game in Facebook using Google Chrome

    I have a Windows 7, 32 bit.  I like to use Google Chrome.  I have one game that won't load.  I have went through all the troubleshooting steps.  I noticed that the settings won't save the "use unlimited" setting.  I have changed it several times and everytime I go back its back on 0.  Help please.

    Besides posting over on Google's forums, you might also want to try closing your browsers and deleting the following folder:
    C:\Users\username\AppData\Roaming\Macromedia\Flash Player\macromedia.com
    Chris

  • Hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

    hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

    Hi doctor.saddam,
    If your MacBook Pro is shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article - 
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • On my iPhone 5, upon receiving a picture, when I touch the arrow to open it I just get a blank loading screen that never loads the pic! Didn't have this issue on my iPhone 4 running OS 6.

    On my iPhone 5, upon receiving a picture, when I touch the arrow to open it I just get a blank loading screen that never loads the pic! Didn't have this issue on my iPhone 4 running OS 6. Is anyone else having this issue?

    Thank You, thank You ...so much......that feature made me crazy!  
    Ocean20 wrote:
    This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

  • Is anyone else's icloud calendar scrolling up to the top, despite me scrolling down?!  It's very annoying!...Am using Google Chrome on a PC (at work) and a mouse with a roller for scrolling.

    Is anyone else's icloud calendar scrolling up to the top, despite me scrolling down?!  It's very annoying!...Am using Google Chrome on a PC (at work) and a mouse with a roller for scrolling.

    I FOUND THE SOLUTION....well, thanks to your link ELLEN!!!!
    https://discussions.apple.com/thread/4581925?start=0&tstart=0
    With Chrome open to iCloud calendar, hold down the Ctrl button and press the 0 (zero) button.  This will fix your problem.  Did mine!
    With thanks to wetintcars.com and husainfrommumbai!!!

  • I upgraded to Mtn. Lion last night but now it takes forever to boot up.  I get to the desktop and my wallpaper is there, but the items on my desktop take more than 5 minutes to load.  It's a ridiculously long time.  Can I fix it somehow?

    As I said, I upgraded my MacBook Pro (2011) from Lion to Mountain Lion last night.  This morning I couldn't get it to boot up at all.  The beach ball just spun and spun.  Now I can get it to my desktop and can see my wallpaper, but it takes another FULL five minutes to finish loading my desktop items.  Can I do anything to speed this up?  It's a ridiculously long time to wait.  I haven't even tried opening any applications yet.

    go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset"
    -> go to View Menu -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> Time range to clear: select EVERYTHING -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click "Clear Now"
    -> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http:www.google.com -> click OK
    -> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> PLACE CHECKMARKS on:
    1) Remember my Browsing History
    2) Remember Download History
    3) Remember Search History
    4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from Last Option (CLEAR HISTORY WHEN FIREFOX CLOSES)
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select unwanted search engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE any Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • I have much problems with version 7.0 three days ago, this doesn´t load pages always says " server no found it" or pages stay on load forever, it besides is so slow. I don´t like this new version. What can i do?

    I'm from Colombia, i have used mozilla since 3 years and i nerver had to have problems with it, but this new version is so unstable.
    whenever I open a page that aperece:
    ''''''Servidor no encontrado
    Firefox no puede encontrar el servidor en
    Compruebe que la dirección no tiene errores de escritura
    del tipo ww.ejemplo.com en lugar de
    www.ejemplo.com
    Si no puede cargar ninguna página, compruebe la conexión
    de red de su equipo.
    Si su equipo o red están protegidos por un cortafuegos
    o proxy, asegúrese de que Firefox tiene permiso
    para acceder a la web.''''''
    I'm very bored with my mozilla, not what else to do.

    This article has troubleshooting information for that error message:
    https://support.mozilla.com/kb/Server%20not%20found
    Also, it is possible your profile might have become damaged during the upgrade. You could try creating a new one.
    Step 1 is to make a backup of your existing profile in a safe place. More information: [https://support.mozilla.com//kb/Backing+up+your+information Backing up your information].
    Step 2 is to start Firefox in the Profile Manager and create a new profile. More information: [https://support.mozilla.com/kb/Managing+profiles Managing profiles].
    If it works well, step 3 is to move your bookmarks (and other settings if you like) to the new profile. More information: [https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before.  Has Microsoft taken over Apple software?

    SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad.  I feel as if Microsoft has taken charge of the Apple Software Division.

    Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
    The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product.  I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse.  Right now, it "feels" like they don't care about existing customers.  I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
    So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD  2, give us the option of going back to IOS 7.  I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat.  By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model.  Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products.  Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace.  I'm done...

  • Since I downloaded version 7.0.1 it takes forever to reach any site

    I downloaded version 7.0.1 recently and ever since, the browser seems to lock up when trying to reach any url. Sometimes it is faster but in average it can take MINUTES or never reach the page. I also use GoogleChrome and the access is instantaneous. My connection is wide bank optic fiber, 6 mb, so that is not an issue. For a couple of years FireFox has been my favorite browser, but if this inconvenience persists I will be forced to use an alternative one.

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    You can try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a more modest setting like 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=692260 bug 692260] - Increase in network.http.max-connections appears to cause hang, requires browser restart

Maybe you are looking for

  • Determine the fax number or EMAIL address for pur docs

    Hi, I am trying to send pur doc via fax or EMAIL. I have created specific  message types for that purpose. The fax is created and sent to the default fax number / EMAIL address. I want the message to be sent to the same vendor but to other fax number

  • Counter based warranty determination

    Hi Experts, My requirement is warranty should be determined when equipment reading is less than u201C10u201D and when counter reading exceeds 10 warranty should not be determined. I have created new counter. Counter category-equipment, counter type-f

  • Archive_lag_target

    Hi, My database is 9.2.0.7 running on HP_UX Itanium.... my redolog size is 100MB and for a day on overage there are 10 archive logs are getting generated. I want to make redo log switch frequently say for every 30 mins like that... I have been going

  • Can i reinstall lightroom 3 on a new computer

    can i reinstall lightroom 3 on a new computer?

  • JSTL URL

    I have the following jstl c:url tag. So I want to forward to a page with the value I get in the forEach tag. But it dont seem to work as it dont forward it, if I hardcode a value, it works. am i doing anything wrong? <c:forEach var="row" items="${rsA