With windows 7, when I print with "draft" the verticle printing is squiggly. Why?

My hp psc 1210 all-in-one is giving me a few problems since I attached it to my new computer whose operating system is Windows 7 64-bit.   It prints fine with my accounting program, but when I try to use any desktop publishing program and print with the "draft" or low ink use setting  the verical columns print out wavy and my company logo is kind of disjointed.  If I print the logo 2" tall, then the second 1/2" isa little to the left of the 1st 1/2" and the 3rd 1/2" is a little to the right of the 2nd 1/2" and so on.  Can someone tell me how to fix this?

Hi there ilovebaskets,
Draft mode will lower print quality some but not to the degree you mentioned. This article should get you back on track. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

    when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
    OS: Windows Server 2008 Enterprise x64
    IE: 9.0 32bit
    webcient service is runing
    HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
    Anybody knows how?
    Thanks.

    Did you add your site to trusted site list?
    http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
    --Cheers

  • Problems with Windows XP when dual booting with OS-X 10.6

    I have track pad issues. I can't drag things, and for some reason no matter how fast I move my finger, it moves the same distance on the screen.
    Is this a common issue? How can I fix this?

    Hi,
    Have you installed all the appropriate Boot Camp drivers? If so, try running Apple Software Update from Windows XP and see whether there's anything new. Other than that, it could be that you've turned off mouse acceleration and that's why your cursor only moves the same distance regardless of speed. As for the Drag and Drop issue - best just check all your Boot Camp drivers are installed and up-to-date.
    HTH,
    S.

  • I have a computer with windows 8, when I plug in IPOD Touch, get message can't download pictures, no music library appears. Any suggestions?

    I have a computer with windows 8, when I plug in IPOD Touch, get message can't download pictures, no music library appears or icon. Any suggestions?

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod/Ipad/Iphone, so I will try to find a solution to your problem.
    Hard Reset: Hold down the Sleep/Wake and Home buttons for at least 10 seconds or until Apple logo appears
    Make sure you have Itunes downloaded
    Make sure Itunes is the latest version
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • Ven though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the

    Even though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the programs. Any suggestions?

    Hi natasachara,
    Please refer to the details about the student plan below:
    Creative Cloud Help | Creative Cloud for Students and Teachers / Common Questions
    Regards,
    Sheena

  • With windows 7 when y connected my Iphone Itunes open . With windows 8 I have to open itunes manually ??

    With windows 7 when y connect my Iphone Itunes opened . With windows 8 I have to open itunes manually ??

    I too am having this problem.  I've noticed that it seems to do it more often when i'm in full screen mode, if there is something downloading or i try to play something within the first minute of opening.  Also, finding a lot airplay issues and playing to apple tv is a nightmare without a LAN connection.   Anyone got a solution?

  • I have itune 10.5 with windows 7, when i click itune store it is not connected and show blank page

    I have itune 10.5 with windows 7, when i click itune store it is not connected and show blank page.

    You can't, Anh.  That's what people are telling you.  At this time there's no way to get out of recovery mode.   You're playing around with beta software and this is what you get.
    Tell your "developer friend" he needs to talk to other developers to see if this can be fixed, or have him replace your devices that you should never have let him play with to begin with.

  • When printing or scanning the copy prints with a black one inch wide stripe all the way down copy .

    HP photosmart 2575 all-in-one, when printing or scanning the copy prints with an black one inche stripe down side of page but when i printed self-test page it printed fine

    Good morning leetrout1. Lets try resetting the printer. Here is how we can do that:
    Make sure the product is on, and then disconnect the power cord from the product.
    Disconnect the USB cable from the product, and then disconnect it from the computer.
    Reconnect the USB cable to the computer, and then reconnect it securely to the product.
    Disconnect the power cord from the wall outlet, and then reconnect it to the wall outlet.
    Reconnect the power cord to the product.
    Press the Power button ( ) to turn on the product.
    Let me know if this solves the issue. If not please be sure to post back with some more information like what operating system you are using, what applications this occurs in, etc.
    Hope this helps!
    -SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • When printing from Preview, the document prints with large print and many lines added and pages added

    When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

    Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
    Thanks again for helping me resolve this problem.

  • H9-1150 PC wont Boot with WIndows 7 Premium 64 bit with ASUS 960 GTX Card.

    I saw others have posted simular issues but i thought id repost this again in case there is more help.  I have the Pavalion Elite Phonix h9-1150 desktop with Windows 7 Home premium 64 bit.  and the HP 7.07 bios (seems no way to upgrade  the bios).
    The issue is like others have had i install the new graphics card the Asus 960 GTX Card which came out last month and the system starts up  gives about 3 beeps in about 30 seconds each and then it goes to a black screen with a blinking curser and nothing else happens. cant enter bios or  the HP settings..
    I did try to disable UEFI boot devices in the bios settings and only enable legacy devices (after switching back to my original card then switching to the new card) but it still gives the 3 beeps upon booting.   However i was able to enter windows. though i think it may be due to shutting off the computer with the old card in without powering down first. and  after the 3 beeps happens (which still locks you out of the bios menu) it shows up the window where you can select safe mode or normal mode.. as sometimes happens if you boot up your computer with windows 7 if you had just turned it off without powering down or something.  Through that i am able to enter windows and run the PC and graphics card with no issue its just when i try to boot the issue happens.
    and No HP suppor it is NOT a defect with the Card itself. Like many before. i bought a EVGA Card a while back a 780 GTX and the SAME issue happend (though i didnt try the removing the UEFI boot devices then) ...
    There is a spacific issue with HP computers that seem to lock out "new" hardware from booting.
    Honestly ill be blunt. I really think this is poor doings I read somewhere that while HP will never state it they do this on purpose to prevent people messing up warrenty or any "liabity" occuring by people installing other hardware onto HP stock computers
    that makes no since to me.  the PC SHOULD be able to run the card. in fact its running it now once i was able to bypass the lock out (temporarly)  check benchmarks everyhting is fine the card runs 3 times faster  then the old one (as should be the case).
    But its just this lockout that HP for some reason has installed on their bios/motherboards that is the issue.
    Good news is i got it from amazon and i have about a month till i have to return it. which i think this time i will do.  to see if anything crops up in a month or something.
    The ONLY solution it seems HP offically has is that to disable secure boot under windows 8
    but this is not a windows 8 computer. and i do assume even if iINSTALL windows 8 . the issue would not go away because since its an older bios there would be no way to have a secure boot option to remove?
    HP you really need to get on the ball and give us a direct reply on this.  Is there ANY WAY to fix this? Can you not simply  make a update of older bioses to allow this? Or do you just not want to worry about older pCs?
    either way i think this is wrong and very frustrating and to be honest. If this is the case when my pc otherwise SHOULD run the card
    its a PCI express 16x slot that is 3.0
    here is the deetailed specs as per your page
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03273835
    the card SHOULD WORK fine.  I thought the 780 GTX was a bit too much for the PC as it had more then a six pin port and needed a bit more power so at first i thought that was the issue. so i returned it. and got this new card now.
    however the ASUS 960 GTX card requires the SAME power supply as the default GTX 550 Ti card and the SAME SIX PIN connector
    so it SHOULD work.
    and benchmarks show that it DOES its just the stupid bios ..that is having the issue.
    i am afraid to power down the computer at the moment and try again to see if windows boots normally after disabling the UEPI boot devvices because it may not boot  properly.......
    HP you are one of the biggest suppliers of computers you know technology these are YOUR computers.  WHY cant you give us a direct awnser over this.
    ITS VERY frustrating
    and to be honest if i cannot resolve this issue i am very hestient to ever buy another HP product if their computers spacifically have this new hardware lockout mode.
    because i have the card running now on my pc it runs great! 3 times faster as it should! and yet i know in the back of my mind if i cant figure out this issue likely ill just have to send it back.........least i have some time.
    and right now i dont have the money to buy a new pc . this PC is JUST fine for what i need for now other then wanting a bit better card...
    it shoudnt be this much of a hassle should it?
    Thank you.
    This question was solved.
    View Solution.

    Hi,
    You need the BIOS update that is listed under Windows 8 in order to support the newer graphics.   You need to upgrade to Windows 8 or temporarily install Windows 8 so that you can install the BIOS update.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  The version 8 BIOS is your best chance at getting the newer graphics cards to work.
    You can trial Windows 8 Enterprise for 90 days.
    If you decide to install W8, then create the HP external recovery media and backup your data before you do anything.
    The reality is that there is no guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Bootcamp with Windows 7 won't start with upgraded RAM

    Hello!
    I upgraded my RAM from 4Gb to 8Gb.
    OS X works fine but bootcamp with Windows 7 Ultimate x64 wont start. The screen goes black and white cursor is blinking at the top left corner. I have waited several minutes but nothing happens.
    When I remove the ram I just installed, Windows 7 will start normally.

    Are there any other options here? This is quite frustrating. I have Windows 7 Ultimate 64 bit on my Bootcamp, and upgraded my RAM from 4GB to 8GB (bought Crucial RAM, which should be completely compatible). When I try to boot Windows, I get the blinking cursor hung. This is the ONLY thread I have been able to find that relates directly to this issue. I started to re-install Windows from the bootable install disc, but that tells me it will re-install Windows, and save all the old data in a volume called "Windows.old" and that I can access this data but "will not be able to use my old version of Windows." Maybe that's OK. Since I use my Windows partition exclusively for gaming and 3D sculpture work, I am pretty sure I can just pull all the appropriate data and re-install it in the new version of Windows. But I am leery of going through all this after reading the tale of woe told here that says that even re-installing with 8 GB RAM fresh does not work. Does anyone know of any other resources or options here? I can't even get to "Safe" mode - just a black screen and the blinking cursor.....arrrrgh! Any help greatly appreciated!

  • HT203433 I downloaded apps with one appleid on my iphone.  When my account was disabled I set up a new appleid & account.  Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id.  What do I need

    I downloaded apps with one appleid on my iphone.  When my account was disabled I set up a new appleid & account.  Now I cannot update apps on my iphone that were downloaded with original appleid when I login with my new apple id.  What do I need to do?

    You can write into support and ask for help reenabling the account through this link here:
    http://www.apple.com/support/itunes/contact/
    Since the applications were purchased on the older account, you will need to log into that account to update them. The newer account will not recognize the purchases because they are not a part of the purchase history for the specific account.

  • Is PE10 compatible with Windows 8? Having trouble with the organizer.

    Is PE10 compatible with Windows 8? Having trouble with the organizer

    It does sound very Watch Folders-esque, however, it seems strange that there are many folders involved. Are all the folders under a single parent folder perhaps? If so, you could try renaming or moving that folder. Additionally, to clarify, all 60 files are images, correct?
    Additionally, you can try creating a new catalog, just to see if that lets you in. Hold down the Shift key while launching the Organizer. If you get the timing right, the Catalog Manager will appear.

  • I have purchased Adobe Acrobat and my order number is 281998924. My previous Sony computer which used to Windows 7 crashed. I purchased a new Toshiba computer with Windows 8. How can I download the Adobe acrobat? I assume I don't have to pay for the progr

    I have purchased Adobe Acrobat and my order number is 281998924. My previous Sony computer which used to Windows 7 crashed. I purchased a new Toshiba computer with Windows 8. How can I download the Adobe acrobat? I assume I don't have to pay for the program again? Thank you for all your help! Angelo.

    If you had purchased Acrobat Standard subscription.
    You need to download the application from below website :
    www.cloud.acrobat.com
    Sign in with Adobe ID and Password and once signed in click on Acrobat tab and download the application.
    Sign in - Adobe ID

Maybe you are looking for