Withdraw material from blocked stock at subcontractor

Hi
We have Third Party Order process where in materials are directly received to subcontracting vendor stock, when Goods receipt is posted in receving plant.
Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
We would like to transfer the stock to unrestricted stock / scrap the stock from Subcontractor blocked stock.
Kindly let me know your opinion to make transfer posting.
Thanks and Regards
Rajkumar

Dear Yadav,
1.
Firste you wrote:
Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
After that you stated this
It is about restricted stock at subcontractor.
2.
And materials are not subjected to batch management. So we cannot use MSC2N.
So, your first statement was that the material is in "blocked" stock, after that you stated that it is in restricted-use stock. But you also stated that the material is not batch managed.
"Restricted-use" is the status of the batch, so your material should be batch managed if its status is restricted-use.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63396b43a211d189410000e829fbbd/frameset.htm
As I wrote you can use MB1A +553O if your material is in QI stock, if it is in restricted use you can't. If it is in restricted-use, please use MSC2N to change its status to unrestricted and after that comes MB1A + 551O.
What is the real stock type the stock you are speaking? Who "posted" it to that stock type and how?
Please give EXACT information.
Thanks,
Csaba
Edited by: Csaba Szommer on Feb 10, 2009 10:50 AM

Similar Messages

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • MM Stock transfer from blocked stock between plants

    Dear friends ,
    Could I transfer material from Blocked stock between plants but in Blocked stock ?
    I not found this movement types in ECC.
    best regards,
    Ale

    It is not possible to move blocked stock between plants.
    You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

  • Unable to create Vendor return delivery from blocked stock

    Hello,
    Would like to know how to enable delivery picking from blocked stock.
    Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
    In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
    Next use VL10b to create delivery document against this PO.  We are able to create delivery & PGI from blocked stock.
    All above steps are executing seamlessly without any issue In our QA system.
    However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
    Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
    Look forward to some good responses.
    Thanks,
    Ram

    Prerequisites
    When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
    Suggest data to simplify data input (for example, the storage location)
    Check that the returned quantity does not exceed the delivered quantity
    Reduce the quantity delivered to date
    Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
    Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • Material at Blocked stock

    Hi to All,
    How can i unbloked the material, i created PID to adjust inventory 702  but it used awrong movement type 707
    can you please help me on how to reverse the block stock what are the transaction code and movement type
    Thanks,
    Ermin D. Concepcion

    Hi Ermin,
    You can try movement type 343 to transfer the stock from blocked stock to unrestricted stock
    via MB1B or MIGO_TR.
    Thanks and regards,
    Polly
    Edited by: Polly Gan on Apr 26, 2010 9:01 AM

  • Goods Issue against outbound delivery from blocked stock

    Dear All
    I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
    Please let me know any solution for this.
    Thanks and Regards
    Satish Kumar

    Hi
    Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
    http://scn.sap.com/thread/1541911
    Thank$

  • Required reference document to issue the material from project stock

    Hi All,
    we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
    the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
    i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
    please help me out to resolve this requirent.
    manoj singh
    we can

    Hi,
    Did you implement PS module in your system?  How were your project stocks reserved?
    Cheers,
    HT

  • Std SAP Programme , transfer the GR Batch Material to Block Stock.

    Hi All ,
    Could you please tell , which is the Std SAP Programme , transfer the GR Batch Material to Block Stock. (ECC 6.0)
    Thanks & Regards,

    such transfers will be made with movements, movement can be created with MIGO transaction or the old transaction MB1B (and several more)
    Just goto SE93, enter the transaction code, display the detail and you will find the program name.

  • Withdrawals from Blocked stock

    Dear All,
    I work with Process Industry , and when I create Rework Process Order i add issued component Manually
    Normally it's Finished Product returned by Customer in to Blocked Stock
    Can i enter storage location and stock type for the component to issue from Blocked stock  ?
    Regards
    Rami

    hi
    Could you Explain what do you mean by ""S" is not a stock type as E fro customer stock, for instance"
    Regards
    Rami

  • Return material to vendor from blocked stock

    Hi!
    I am going to use blocked stock (s) to lock low quality material.
    How could I return it to vendor. Please give me document chain .
    We use WMS and document flow must include outbound delivery.
    Andrey Garsin.

    Hi! Thank you for answer
    Please provide more detals.
    I need to manage two return scenarios:
    1. stock was loaded into SAP system from  old (non sap system). no purchase order in the system.  stock was created with mvtye p 561.   
    2. Stock was recived from vendor using PO + inbound delivery + GR (101) . Now this stock need to be returned to vendor. 
    If you have a time please give me more detailed step (document flow and key steps inside document ) for both cases or link to help. I have found only this description http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm but it is too rough.
    Andrey

  • Transfer posting from material to material ( for blocked stock)

    Dear All,
    Whether transfer posting from material to material can be done for blocked stock also? because through 309 movement type i did not find any option, so let me know if there is any option
    Regards,
    Balakrishna R.V

    Dear
    Transfer posting of material can't be done if material is in Block Stock.
    When block stock is inspected in quality test in inquality inspection stock then it goes to Unrestricted use stock.
    finally Transfer posting is possible for unrestricted use stock material.

  • Insp lot required while transfering qty from blocked stock to unrestricted

    Hi, say when we recieve 10 qty of  goods from vendor, 5 are ok and remaining are not ok, so inspection done and 5 qty putit in blocked stock. now with some minor rework by the vendor (vendor came to our premises and reworked) made it ok, accordingly we need to inspect the reworked parts. pls advise how to map this in sap qm? how insp lot generated, pls explain the process.

    Activate inspection type - "08" in material master.
    Now do MB1B - mov type 349 - Blocked to QI.
    Here system will create insp. lot.
    Do inspection of lot if okay then unrestricted.
    Hope this helps.
    Thanks!!!

  • Mtrl movement from blocked stock to vendor

    my material is lying in bolck stock.
    i want to send back that mtrl to vendor.
    hw can i?

    hi,
    return delivery for gr blocked stock is movement type 124.
    the table below shows which reversal movement types you can use.
    movement type    return delivery          substitute delivery
    (GR) 101                 122                              123
    GR  103                   124                              125
    GR 105                    122                              123
    PREREQUISITE :if you want to return delivered goods to vendor for some reason(due to poor quality  or because they are damaged)you can use this function to return goods even if you have posted goods receipt.
    when you enter return delivery you should reference the p.o. so the system will suggest:
    check return qty does not exceed delivery qty.
    Reward points if useful
    Regards,
    N.Ramesh

Maybe you are looking for

  • New member to "...User did not respond" Error -8 Club

    Have been iChatting via an AIM account consistently for several years, with both family and friends using both PCs (using AIM with Windows XP) and Macs (using AIM or .Mac servers) Two weeks ago, I started receiving the "Video Chat canceled because...

  • I need to do an buy form

    i have a problem, i'we made an form with one combo box , one text field and one text area where all the info is displayed. In the combo box there are 4 positions:Item 1 , Item 2, Item 3, Item 4. the user selects its item then types in the text field

  • TRACK_ENTERED_FUNC_CURR_FLAG column from set of books what is it in R12

    We are working on validating objects now that we are going to migrate to EBS R12. We are using above column from the old table GL_SETS_OF_BOOKS into R12, but now this is not a table but a view. So now what is the equivalent column for the old TRACK_E

  • After Effects: "You have this plugin twice" issue SOLVED

    Do you get problems in After Effects telling you that you have more than one time a plug-in, installed on your system? What After Effects does, is to scanning the Plug-ins and presets every time it opens, if you by mistake installed one plug-in two t

  • Bang & Olafson (B&O) EarSet 3 and Iphone 4

    When I use my B&O Earset 3 on the iphone 4 on a telephone call, I hear a slight clicking in the background, but people on the other end say I'm dropping every 3rd word and I sound like I'm riding a horse. Music is fine. Worked great on 3GS with 3 and