Withdrawal number in wrong sc follows-on-docs column?

Hi SDN,
our shopping cart created in SRM generates a reservation in backend. so far so good. Now we Post the goods movement as withdrawal with movement type 201. Everything is ok. But ... in SRM the withdrawal number is displayed in column "Number of Document". I expected it in column "Number in <backend logsys>". Why?
I looked for notes and threads without success.
Thx and best regards,
Danilo

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

Backend PO number does not update SRM follow-on doc section

Hi Guys,
We are on SRM5.0 and ECC6.0 with Classic scenario.
We are developing a logic in BADI BBP_CREATE_BE_PO_NEW (method FILL_PO_INTERFACE1) to determine if a Goods Receipt is required for some business conditions. Below is the logic.
1.If GR is required then create a PO with External number range in backend. This is working fine.
2.If GR is not required then create a PO with internal number range in backend. PO_NUMBER field will be cleared in the BADI so that backend system creates a PO with internal number range. This is working fine.
But the problem in the point 2 above is, internal PO# is not reflecting in the follow-on doc section in SRM. I noticed that SRM allots a PO# in table BBP_PDBEI with backend external number range before it transfers the data to backend. We tried to delete the PO# in BBP_PDBEI-BE_OBJECT_ID in the same BADI so that backend system can updates this field BE_OBJECT_ID in SRM with internal number PO. We did not succeed in doing this.The SC status shows Approved but do not show the PO#.
Can any one tell me how to populate the backend internal number PO in the Follow-on doc? Is this the right way of doing or is there any better way? Did any one developed such logic?
Please share your thoughts and experience.
Thanks in advance..
Jagdish

I noticed that SAP takes the number sequence from number range PO and updates BBP_PDBEI field before sending the Purchase order to ECC. If the different number range is defined in IMG "Define num range per Backend system for Follow-on docs" then system takes that num range. Then BBP_GET_STATUS_2 checks the PO# and updates SRM if the PO# matches otherwise it wont update.
But in our case we defined num range 44 for POs with Goods receipt and would like to assign another number range 22 for POs with NO GR. We can assign different PO doc type (ZEC) for NO GR by using BADI BBP_CREATE_BE_PO_NEW. But how to assign num range 22 for ZEC dynamically in BADI. System is trying to take num range 44 by default.
Is there any way we can assign different number range in SRM BADI?
Thanks,
Jagadish

HT201303 I believe I put my credit card number in wrong now trying to buy an app and I can't bc my security code don't match what do I do?

I believe I put my credit card number in wrong now trying to buy an app and I can't bc my security code don't match what do I do?

No. Apple is not in the credit bossiness.
You can create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can redeem an iTunes gift card into your account too
Apple - iTunes - Inside iTunes - How to Redeem Free Download Codes and Gift Cards In the App Store and iTunes

Program or FM triggered when creating follow on doc after approval

Dear All,
I am unable to debug the steps between approval of doc and creation of follow on doc. My problem is that when creating the follow on purchase order doc from SC, system is entering junk value for CZECH name (Non English user). I am unable to stop or debug as the follow on doc is getting created autometically. Please suggest.
Best wishes,
Atanu

Hi,
You do the following checks & let me know the result:
1. Go to SC BBP_PD item data and check the PO number. Whether it is created?
2. Use tocde RZ20 for any error in SC or PO.
3. You must see the error in Application monitor SC or PO web page with detail error.
4. Execute transaction SE37 and enter the FM BBP_REQREQ_RESUBMIT and then give the shopping cart number in REQNO field and then execute.
Function Module should work considering the shopping cart is in approved status and in the Follow on documents the status says Approved and in transfer process.
5.Also check whether the jobs CLEAN_REQREQ_UP and BBP_GET_STATUS_2 are working fine?
Regards,
yaniVy
reward if helps

Processing not possible; follow-on docs do not permit posting - WM

Dear All,
The transaction WAE03, while doing the posting of waste material the following error occured "Processing not possible; follow-on docs do not permit posting"
Please help me out.
regards,
ravi

Hi ravikk,
I suppose you are modifying an entry document, this entry document has a document category (SPRO Environment, Health and Safety ->Waste management -> Disposal Processing -> Basic Settings for Disposal Processing -> Specify Document Categories -> Document Category/Functions Assignment), the document category may have assigned a status profile (the default for waste disposal management is EHS_WMM1).
With the status profile (SPRO - Environmental, Health & Safety -> Waste Management -> Disposal Processing -> Basic Settings for Disposal Processing -> Status Management -> Check, Extend, Set Status Profiles) you can see that has several status number, do double-click in any of these numbers and you will see other screen (Transaction Control), here you see what are you allowed or forbidden when your entry document has this status. You can see the avaliable trnsaction with the menu (Environment ->Transactions), waste management transactions starts with WA* and its description with WA-PRO:.
Back to the initial screen if you push the button 'Object Types' you go to 'Allowed Type Objects' the checkbox 'Waste Quantity' must be checked.
Check this link for more info about system status and user status link
Regards
JCD
Edited by: Juan Carlos Delgado Peña on Mar 5, 2012 3:20 PM

Legitimately bought serial number is wrong???

Wanted to install legitimately bought CS2 from CDs on a new PC. Installed with serial number. Installation without problem, but activation is not possible. Telephone support says: Go to www.adobe.com/go/activation. So I loaded down the 3 files "CS2_RetNon_Ger_1, 2 and 3" which should function without activation and tried to install. But now the installation routine says, that the serial number is wrong. What can I do?

Hello Gerald,
did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
Hans-Günter

Follow up doc in R/3 using action profile

Hi
1)How to create a follow up doc i.e billing doc in r/3 for sales order created in crm?
2) How to create a New Tab Using EEWB for Marketing campaign? its showing only basic data,channels...
Regards,
sanjana

Dear Manfred,
Thank you very much for quick response. I have used method called APPOINTMENT_OFFER and LEAS_NOTIF_01 I am getting the following exception. I have also tried with some other methods they also giving same exception.
Exception Details
CX_SY_MOVE_CAST_ERROR - Source type \CLASS=/CRMS/CL_CRM_CMG_PPF is not compatible, for the purposes of assignment, with target type
Method: CL_ACTION_EXECUTE=>GET_REF_OBJECT
Please advice.
Thank you and Regards,
Niranjan

How to control follow up doc for Activities

Hi...
I have created 10 different types of Activitiy Doc. When I open any activity in crmd_order I'm getting all other activities as follow up docs(when I click on follow up icon). I dont want all of them, may be I need one or two out of those. How to control those can anyone have idea
Regards,
Ajay

Hi,
Check the copy control for transactions in
spro-->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types
If the transactions are maintained as follow up for the transaction you have created then remove the entries which you dont want as follow up.
Reward points if it helps.
Shridhar

How can I insert a number of photos in a numbers doc without the file becoming too large?

How can I insert a number of photos into a numbers doc without the file becoming too large?

Use smaller photos.
Seriously, reduce the file size of the photos in Preview, PhotoShop, iPhoto or other application before inserting tehem into the Numbers document.
Regards,
Barry

Item Number Sequence - Wrong Order

Hi Masters,
I have a doubt about item number sequence on the screen.
This is a example of my screen: [Item Data |http://www.sapsrm.xpg.com.br/SAP/QUOT.jpg]
Why the sequence number are wrong? Have any note to solve this?
Thanks,
Pedro

Thank you for the intention, but my SRM Server is the 550 and I already assists that note.
My SRM is the 5.5.
Some other idea?
Thanks,
Pedro Marques

Error during determn of backend follow-on doc. for shopping cart

I am using Classic Scenario in SRM 4.0 and R/3 ECC5.
When I am making PO in SOCO against approved shopping cart I am facing following error and PO is not getting created.
"Error during determn of backend follow-on doc. for shopping cart XXXXXXXXXX"
I have Checked up following :
1. Product Cat defined in backend and in Org plan attribute
2. Object for Prod Cat Vs. PGR defined in SPRO
3. Doc type in R/3 attribute defiend in BSA attribute of Org Plan.
Still problem is coming.
Any clue form some one.
Sanjay

Hi Sanjay/Vadim,
We are also having a simialr issue..
for SRM server 500 SAPKIBKS08...
R/3 4.7
"But this issue comes up only in the Test system and works fine with the Dev sys.." Double checked all the config steps and looks alike..
We are using the classic scenario RFx process to create a backend PO from the bidding engine after the bid is accepted..
it alwayz throws up the error SC/ Local Error..
: Error during determn of backend follow-on doc. for shopping cart 0010000103 / 0000000001....
we just started debugging from the web by breaking it at META_BAPI_DISPATCH and still looking into it..
but in the mean while just want to know if this is more a config issue or and RFC connection issue..
could you forward me any OSS notes if any regarding this issue..
thanks in advance..
Regards
Manoj

Follow on doc missing from SC

Hi there,
SRM 5.0, SP10, Extended classic scenario,
Facing the problem after SP upgrade only.
Shopping carts exist that have already been ordered and approved and that have status "Follow-on document created" However, the follow-on documents are missing from the object links and therefore, the system does not display any documents in the shopping cart history.
meaning in follow on doc of the SC history is missing. *This is happenign for deleted lines of the PO
only*
Steps 1. SC created -- apprved ---PO created --- follow on doc of SC shows PO
Step 2 one line item of PO deleted --- PO approved --- SC follow on Doc is not shpwong PO as 'delted'
which was showing earlier before Support pack upgrade to 10
In the items, status I1111 ("Item in transfer process") is active, and I1113 ("Follow-on document created) is also active.
Anybody faced this problem please suggest the solution.
Regards

Hi Suren,
The note is quite old and it talks about SRM 3 and 4, interstingly I have fond another note which is exactly the same as the problem we are facing 949162 but as the note is released on june 07 and does not specified any SP and we are facing this problem after Sp upgrade to 10 I am bit reluctant to put in system.
Anybody on SP 10 has faced this problem before??
regards

Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license serial number removed , but the system say that my number is wrong, but is not. What shall I do???, thanks

Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license 1160-4006-5882-6826-4588-7623, but the system say that my number is wrong, but is not. What shall I do???, thanks

You probably downloaded the Lightroom Creative Cloud version. Your Perpetual License key will not work.
Uninstall the existing version of Lightroom, this process will not affect your Catalog, Preferences or personal files.
Then download the correct version from the link below, install and enter the license. Every thing should be just fine. (Also by displaying your License Key for all to see anyone can use it to have a free copy of the program)
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6

User changing position in ECC and impact on follow-on docs

Hello all,
Can any one tell me what will happen when a requestor creates a shopping cart and then moves to a different org node in org structure. The EBP users are built by distributing the positions and employees from the HR System.
for Eg:
1.USER1 is assigned to a org unit O 5000XXXX and creates some shopping carts
2. Now the user (USER1) is transferred/ assigned to different org unit O 5000YYYY
1. What will happen to documents in SRM (SC, CONF) that were created by the user
2. What will happen to the follow-on Docs in ECC(PR, PO, INV)
3. What will happen to approval items if the user is an Approver?
4. Whenever there is an update to the user position in ECC will it create a new BP in SRM?
i will award points and Appreciate your help.
Arpita

Hi Arpita,
This is how I see it working. Hope this helps.
1 - When User1 changes position. He is assigned to a different org. unit, l assume User2 would be taking over User1's responsibilities.
2 - This means all the open documents against User1 like shopping carts, purchase orders, confirmations, contracts now will be taken over by User2. There are business partners assigned to every business document. In this case the business partner needs to be replaced from User1 to User2 for the Open documents.
Regards,
RB

Cannot get Photoshop elements 11 to work. Get the message that my serial number is wrong. I do not think it is.

Cannot get Photoshop elements 11 to work. Get the message that my serial number is wrong. I do not think it is.

If you are certain it is correct, you will need to contact Adobe:
Contact Customer Care
You may need to use the chat option.
If you want to check your serial number, sign in to your Adobe account if you registered it.

Withdrawal number in wrong sc follows-on-docs column?

Similar Messages

Maybe you are looking for