Withdrawal quantity in the PIR Schedule Lines - MD63

Hi Gurus!
In MD63 - sched. line tab, what is the 'withdrawal qty' column? Where does it get the value? In my case, I don't see any withdrawals for the particular month, yet the system shows a large qty in this column. The problem now is that the new forecast value I load for this month is reduced by this withdrawal qty. Where should I look for this qty in the system?

Hi,
I hope you got the answers for your question.
Could you please share the same with us, How you have identified the withdrawal quatities eventhough the actual withdrawl is very less compared to the value shown in Withdrawal quantity in the PIR Schedule Lines - MD63.
There are couple of OSS Notes (Note 772857 - FAQ_Independent requirements reduction_withdrawal quantity.pdf
Note 772856 - FAQ_Consumption of planned independent requirements.pdf) but they are not expalining this behavior completely.
Thanks in advance,
Siva

Similar Messages

Retaining the old schedule lines after the ATP check in the sales order....

Hi Experts,
I would like to retain the old schedule lines after the ATP/GATP check in the sales order for certain conditions.
I don't want to change XVBEP,IVBEP,VBEP contents in the user-exit..
Is there any standard sub-routine or function module to reatain old schedule lines in the sales order so that the schedule lines will not update with the new values after the ATP check ?
Thanks
Rayudu

In Include LV03VFMM, you have:
* Userexit availability
PERFORM USEREXIT_AVAILABILITY_IN USING DA_ATPPR.
There may be an option to implement some logic in here. However, I tried changing the value of MVERF_POS-EINTEIL[1]-VFPKZ to initial. This will ensure that when FM AVAILABILITY_CHECK_CONTROLLER is called that the following IF statement is untrue:
CHECK NOT P_ATPCSX[] IS INITIAL.
as P_ATPCSX[] Table[0x648].....
However, this will just mean that the 2nd confirmed schedule line (assuming we have > 1 schedule lines) will have a confirmed quantity to zero.
EXIT_SAPLATPC_001 could also be used. However, when I removed the "X" from CHKFLG, I get the same result; the 2nd schedule line will revert to zero.
They were the only tests I tried; I cannot think of any other ways around this....

Scheduling in Deliveries not copied from the correct schedule line of SO

Hi All
I have availability check activated for sales orders.
In which for a given material it determined 2 schedule line .
Schedule line 1. With 0 quantity -- e.g. delivery date 01.10.2010
Schedule line 2. With 5 quanity -- e.g. delivery date 05.10.2010
The re-scheduling is de-activated for my delivery note (type).
When the delivery note was created, it had planned delivery date = 01.10.2010, and not 05.10.2010.
Why was the date in the delivery copied from the 1st schedule line instead of the 2nd schedule line which was the correct date based on material availability?
What should be done to ensure that the delivery copies the dates from the 2nd schedule line?
Thanks for the answers!
Regards
Rajesh

It is solved. Copy routines did not consider multiple schedule lines.

How to control not to confirm quantity in sales order schedule line

Hi,
We have a problem with confirmed quantity in sales order schedule line.
When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
I need in some cases that system not to confirm quantity in schedule line at item level.
I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
Could you help me? How can I avoid the system to confirm quantity in a sales order item?
Thanks in advance....

Hi Lakshmipathi,
I'm sorry. The rejection was a bad example.
I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
I've tried with rutine in OVB8. But It didn`t work
I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
Thanks

The delivery schedule lines don't get created automatically on MRP run.

Hi All,
The delivery schedule lines don't get created automatically on MRP run for subcontracting material. I have maintained source list as follow eg.
Valid from | Valid to | Vendor | Porg | PPI | Agreement | Item | Fix | MRP | MRP area
02.11.2009 | 31.12.2999| XYZ | XY01| |AA0000XYZE |10 | X |2 | ABC
Could you please help me about this issue
Thanks in advance.

Hi Amit,
Please ensure the value of Special procurement key in the MRP2 view for the material. It should be maintained as 30 - subcontracting.
Thanks and Regards,

How to delete the old schedule line release?

Hello,
How to delete the old schedule line release in apo?
Generally GR has to be carry out schedule line release in r/3 which reduces the Schdule line release.
But i do want do GR against old schdule line release instead i want to delete the old schdule line release.
Please suggest.
Regards,
Sunil Patil

Sunil ,
/sapapo/cmds_del is the tcode to deleted sales scheduling agreement confirmations and releases
/sapapo/display_conf is the tcode for displaying sls. sch.agr confirmations and releases
The above two are in the supply chain collaboration menu
/sappao/cmds_sc02 is the tcode to delete sales scheduling agreements . This tcode is in the application specific master data menu
Thanks
Saradha

How to delete the old schedule line release in apo

How to delete the old schedule line release (from current date) in apo which is having schedule firmed?
Please suugest.
Sunil

How is it possible to delete old purchasing schedule lines in APO (that do not exist in R/3)?
Though used successfully before, /SAPAPO/CCR will not reconcile our discrepancy in this case.
Thanks in advance,
Jim

VL10G is not creating delivery for some of the confirmed scheduled lines

Hi, I was trying to find the reason why we are getting a very generic error message (Message type V50R ID 036 - The document could not be delivered.) for some of the confirmed schedule lines when executing VL10G in batch and no delivery document is created. Those orders have confirmed scheduled lines and inventory has confirmed to have stock. However, when the VL10G is executed in background, the sales order line items will be captured into the list but when creating delivery, the systems is showing the above error message.
From debug, found out the message is generated from LV50R_VIEW43.
We went through lots of OSS notes but nothing seem to ring a bell here. We are using ECC6, list type = index list.
The error message is very inconsistent. The same documents will be dropped for delivery after several days without any change to any of the sales document or inventory level.
Some of the note mentioned the parallel processing lock on ATP check for the material may be the reason for the error however we are not using any parallel processing in VL10G. We also checked the index table VEPVG has all correct entries and all the entries are being selected into the delivery due list. Error happens when the delivery is trying to be created.
Any advice is appreciated.
Thanks.

Hi ALL,
Any suggessiton on the below issue.
We have batch jobs to process the DDL for the STOs, but some of the line items of the same STO is not picked up by batch job, (VL10B is assigned in the batch job, i checked the variant and configuration, everything seems to be fine, when i try to process the DDL through VL10B manually by giving the STO number only, the VL10B program is not picking the STO, but the same STO can be processed through VL10D, what could be the problem and why the VL10B program is not recogonizing the STO for the delivery creation.
We are using ECC 6.0
Regards,
Rajesh.R

Quantity clubbed for two schedule lines in sales order

Hi,
One finished item F1 having strategy 20. special procurement key as 40( to get from another plant) Its sales order is created for 20 EA on 6 nov.So one line item in sales order.
Item availability check is done.in schedule line I can see system proposes available date as 9 Nov. I manually split the quantity as 13 EA on 10 Nov and rest 7 EA on 18 Nov.
Now in schedule lines tab I can see three line items:
date      confirmed qty
6 Nov      zero
10 Nov      13 ea
18 Nov        7 ea
MRP is run. system generated Stock Transport Purchase requisition of 20 ea dated 6 Nov.Qty and date both is wrong. Why quantity gets clubbed?? Why date is picked as 6 Nov?? I expected system to create two Stock transport purchase requisition of qty 13 dated 10Nov and qty 7 dated 18th Nov.
Please guide if there is any config mistake in PP or SD side.
Regards.

PP,
That is pretty standard. If you do not meet the customer's requested date when you confirm the sales order, the system assumes that you sitll intend to make the attempt. MRP will produce a proposal based upon the customer's requested date and requested quantity.
If you want MRP to consider the confirmed dates/quantities, set the Fix Date Qty flag in the sales order item.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/93/744bcb546011d1a7020000e829fd11/frameset.htm
If your standard business process is that you always wish to plan based on the confirmed date(s) rather than the requested date, you can configure to have the Fix Date Qty flag defaulted; in OVZJ.
Best Regards,
DB49

Delivery quantity is greater than schedule line confirmation quantity (sales order)

I am creating a sales order with 30 Mt. I confirmed 10 Mt (partial confirmation and based credit block) in schedule line Now I am going to create the delivery system automatic taking 10 Mt but when I am going to change the delivery means when I increase the delivery quantity (20 Mt) then system allowing to do the further process.
As per my understanding system should not allow to increase the delivery quantity m ore the sales confirm quantity.
Please suggest how I can restrict.
Thanks & Regards
Sujit

Thanks for your reply, As you suggest "B" is there. But its not working. For ref. screen shot is attached.
For reference I am providing some more details:
=> We are using "Make to order" process. After creation of sales order we assign the stock to sales order using T-code MB1B , Movement type 412E,
=> Auto credit check applicable
=> Confirmed quantity in schedule line based on credit limit.(Auto credit check at Sales order level)
=> Avail. Check is 02 and check. rule is "AE" .
Thanks and Regards
Sujit

Credit limit check cause the item schedule line confirmed qty empty

Hi,
I have an SO that is under credit limit check, the problem is, after releasing it via VKM3, the confirmed qty at item schedule line is not taking the qty as of stock at the time. The SO qty is 100 Pcs, but there's still stock of 80 Pcs. I will then need to split the schedule line to 2 lines --> 1st line with order qty 80 Pcs, and 2nd line 20 Pcs. Then only the confirmed qty appear for the 80Pcs.
For usual SO that is without credit checking, the confirmed qty will immediately shown as in 1 schedule line. Does anyone know why is this happening and can we amend this problem?
Thanks.

Hi
If an order is subject to credit check once you save the order the confirmed quantities becomes 0 because if the settings done in t code OVB8 Number of the routine used for copying is set as 101and System FORM routine number is set as 1 (and this is the standard settings)
This is kept like this in standard so that if a material stock is say 10 units and order from customer X has come for 10 units and that order is blocked on crediit limit so that when the next order from customer Y has come for another 5 units and this customer Y has a better credit limit and this order is not blocked on Credit limit check then she should not suffer for stocks
A genuine customer should not be deprived of stocks
For you between the order registered and released thro VKM3 another order has come from another customer for 20 units and hence the 100 units has become 80 now and balance 20 is confirmed for a future date thro forward scheduling
In T code OVB8 you can do the customizations for this scenario according to the business requirement
Regards
Raja

How to identify the Open Schedule Lines.

Hi All,
I am writing an ABAP report which requires to identify the OPEN SALES ORDER SCHEDULE LINES.
The requirement is to identify the Open Sales Order Schedule Lines for a particular month (user Processing month in the selection screen). Here the Schedules line item could have been delivered already. If it is not Billed then it is OPEN schedule line.
Can anyone help me to understand the logic which I need to apply to identify only the Open sales order scshedule lines.
I am using the following tables:
VBAK,VBAP,VBUK,VBUP,VBEP. Is there any other table which I need to use? I am trying to avoid using table VBFA due to performance issues.
Thanks in Advance
Regards
Gopalakrishnan S

Hi Gopal,
If you want to find status of any sales order line item then you can find from following method from VBUP table.
In VBUP table there is a field FKSTK.By this filed status we can find billing status of particular sale order and this field has four possible values and these are
<i><b>field value field value meaning</b></i>
if this value is space then order is not Not Relevant for billing
if this value is 'A' then order is    Not yet processed
if this value is   'B' then order is Partially processed
if this value is 'C' then order   Completely processed
If you want to find status for the header then go to VBUK table and process is same as above.
In these table we can find all types of status.
Message was edited by:
        shyla kumar
Message was edited by:
        shyla kumar
Message was edited by:
        shyla kumar

When we run the MRP schedule lines are not generated automatically.

Hi,
In MD04 requirement date is on 5.12.2009.My source list validity starts from 1.12.2008 onwards.When i run the MRP for the material system generates the Purchase requisition instead of the schedlue lines.When i change the source list validity as 25.11.2008 now i run the MRP system generates the schedule lines.
My question is why the system couldn't able to generate the schedule lines when the validity starts on 1.12.2008.In the source list we maintained the scheduling agreement and maintaine the MRP setting as 2.

hi,
Let me know your purchasing processing time defined in the SPRO settings for CBP?? It may be due to this also...
Regards
Priyanka.P

How do I access the item Schedule line date in VA01?

Hi,
I am using userexit_check_vbep to carry out some checks. I need to access the Schedule line date value (RV45A-ETDAT) but it is not available at that point. How can I read that value from the exit?
Thanks,
Kroc

Thanks Advait,
ahhh, I asked the wrong question. Yes, xvbep is available in the userexit but my code is being called earlier in the process. This is the call sequence
VBAP_FUELLEN
VBAP-VSTEL_ERMITTELN
VBAP-ROUTE_ERMITTELN
SD_ROUTE_DETERMINATION
EXIT_SAPL0VRF_001............This is where I need to access the schedule line data
Z_CUT_OFF_TIME_CALCULATE............This is where I need to access the schedule line data
Z_CUT_OFF_DETERMINE_DATA............This is where I need to access the schedule line data
Do you know if it is available at that stage?
Thanks,
Aidan.

V_V2 Rescheduling does not give the split schedule lines

Dear All
When I create a Sales order, if the partial qty is available, system confirms partial immediately and balance after lead time.
However when I run rescheduling run from V_V2 , it changes all the qty to end lead time confirmation.
I do not have any other sales order in Pipe line.
Why the Rescheduling does not confirm on split basis.
Looking for exprts opinion.
Regards,
Neeraj

Hello,
I have two ideas related to your question:
-1-Try to use the transaction V_V1, it the same function of the V_V2, but you can select the sales order instead the material.
-2-Check in your sales order if you have the flag "no re-scheduling" it's a flag on the schedule line( item, tab schedule line), if you have selected the flag, the v_v2 doesn't works for the schedule line.
If I think anything i'll send you a message,
Best regards

Withdrawal quantity in the PIR Schedule Lines - MD63

Similar Messages

Maybe you are looking for