Withdrawl of material(with batch) for scrapping that shelflife passd
Dear Guruz,
in have an issue in withdrawl for scrapping with mvt type 551. But my materials are maintained in batches and the shelf life has expired. The materials are also damaged so i want to scrap them but there exist stock for those materials. how can in do it.?
batchxxxxxx is in use.plz use another batch
Dont you have a message number ? double click the message to see the message number. It sounds like a z-message, which means it is home made, triggered from a user exit.
Best you try it manually in MIGO, before you test it with a program
Edited by: Jürgen L. on Sep 2, 2011 6:12 PM
Similar Messages
-
Material with batch management
Hi gurús,
We have a material with Batch management for which already took place movements. Sales orders and lots have already been created.
It is posible removed the mark and use the material as non material with batch lot?
Thanks in advance for the help
Regards
EnzoPlease check:
http://help.sap.com/saphelp_47x200/helpdata/en/eb/650362e5a511d285ed0000e82013e8/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e59fd462a11d189000000e8323d3a/frameset.htm -
How to create a batch for a material, with batch characteristic input?
I am currently using BAPI_BATCH_CREATE to create batch for materials in my program. However, I find no way to input the batch characteristics. Is there any existing function module responsible for that? Thanks!
Hi,
You can use FMs 'CLVF_INSERT_AUSP' or 'CLVF_INSERT_AUSP' to insert or update characteristics for materials.
In the structure INS_AUSP or UPD_AUSP -
OBJEK corresponds to the material number,
ATINN is the characteristic name,
KLART is the class type which is '001' for materials, and
ATWRT is the characteristic value.
Populate values into the above fields for the batch of materials and call this FM.
Reward points if found useful...!
Cheers
Abhishek -
Material with batch is stuck in storage bin.
Dear Gurus,
I have a scenario here.
previously material A has turn on the batch management. later then, it is turn off without checking properly. Now in the system, material A is stuck in a few bins with batch. Our master data user do not allow us to turn on and off the batch because it will affect other plant.
Has anyone encounter such issue before?
I need help badly.
Thanks in advance.
Regards,
Santthi.You cannot turn off batch managment "without checking properly". You could just turn off BM, if batches already exist, with an own created ABAP. And this alone is causing your troubles.
Best, you take a weekend where nobody in the plants are working, then you use the same uncomplient ABAP to switch BM on again, goods issue your batches, run archiving, for the batch records and switch off BM using the regular way. -
Warning message at the time of GR for a material with Batch Management
Dear All,
I am new to MM,
We are using batch at plant level. For some materials user dont want maintain
Batch classification in Material Master. At the time of Goods Receipt posting with ref-to PO user getting warning message like <b>For batch 0000000139 of material 212030602400000 4F10, no class could</b>. I check system messages setting transaction code OCHS for batch management, but I didnt found this type of message in the list.
Plzz can any one help me where I need to change system settings?
Thanks in advance.
Meeravali shaik.HI,
Check in the IMG node Logistics general > Batch Management > Define attributes of system messages.
Regards,
RitiG -
Packing Material with Batch Management and Shelf life expiration date check
Dear All,
I created a packing material and activated batch managemnt with shelf life.
At the time of GR the batch should be created automatically or if i want to create a batch manually for some materials how to do it in the system.
Help meBefore going ahead with the batch creation,
you need to activate the batch mngmnt level (i.e.Client,plant,material level)
And also activate the Nor.ranges.
Then Create the Classification,Characteristics and assign the Chrctstics to Class.
Then create the batch
T Code:
CT04 create Char.
CL02-Create Class
CL24N:Assign class to material
MSC1N:Create Batch -
Stock details of a material with batch details
Hi.
I am developing a PP report for which i require the available material (un restricted stock) details and their batch details which are being displayed in MMBE (tcode). Is there any function module or BAPI or else what is the table name for finding this. Please help me for this for which i ll be very gr8 ful.
Thanks.
AshokHi Ashok,
Check these tables MARDMSEGMKPF.
Try this FM's also,
MB_READ_MATERIAL_STOCKS
MD_STOCK_REQUIREMENTS_LIST_API
Check this link.
https://forums.sdn.sap.com/click.jspa?searchID=3418879&messageID=291518
Thanks,
reward If Helpful. -
Randomly generated competition draw with priority for players that has preference
(1) INPUT
player# ColumnA
Preference
1 player1
music
2 player2
3 player3
music
4 player4
music
5 player5
singing
6 player6
7 player7
8 player8
(2) my original requirement was to pair the players randomly, so i used following solution.
In E1 i have RAND() for 1000 rows (E1000),D1 I have 128 teams
In A1 used this formula
=IF(ROW()-ROW(A$1)+1>$D$1/2,"",RANK(OFFSET($E$1,ROW()-ROW(A$1)+(COLUMN()-COLUMN($A1))*($D$1/2),),$E$1:INDEX($E$1:$E$1000,$D$1)))
copy across to B1 and down as far as you might need.
Assuming you have 128 in D1 then A1:B64 will now include one each of numbers 1 to 128. Subsequent cells will be blank. Change D1 to any even number to regenerate numbers. Note: recalculation of worksheet will re-generate random numbers, hide column E if you
wish
(3) So now i have a new column called PREFERENCE that has preference / interests that players have set.
I want to enhance above formula to give priority to players who have set preferences and do their pairing first with other players who have the same preferences.
If there are no players that have matching pair per perference (e.g singing in above example) then do random match.
If there are no preferences set then simply follow the logic that i have shared above for random pairing.
Appreciate your help!!Hi JainPaddy,
Thanks for posting in MSDN forum.
Based on the description, you are design a workbook with formula. I would like move it to
Excel IT Pro Discussions forum since the issue is relative to end-user.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help with a For loop that uses a Break statement
I need to create a for loop which counts down from 100-50 and divides the number being counted down by a counter. Can anyone help me?
public class Break
public static void main ( String args []) (;
int total = 0
int counter = 0
for { (int number = 100; total >=50; total --)
if (counter == 0)
break;
} // end of for loop
int output = number/counter
system.out.printf("The number is" %d output/n)
}// end of method main
}// end of class BreakIm sorry I didnt explain myself very well i do not need the break statement at all.
I now have this code:
public class BreakTest
public static void main( String args[] )
int count; // control variable also used after loop terminates
for (int i = 100; i >= 50; i = ++count)
if (i >= 50) {
continue;
System.out.printf( "\nBroke out of loop at count = %d\n", count );
} // end main
} // end class BreakTest
/code]
and i get these error messages:
F:\csc148>javac BreakTest.java
BreakTest.java:9: variable count might not have been initialized
for (int i = 100; i >= 50; i = ++count)
^
BreakTest.java:15: variable count might not have been initialized
System.out.printf( "\nBroke out of loop at count = %d\n", count );
^
2 errors -
Material with flag for deletion are not getting deleted
Hi All,
Classic Scenario
ERP - Materials were marked for deletion on the client level
SRM - COMMPR01 - Materials are marked for deletion
Question - When we ran BBP_CCM_Transfer_Catalog and Publish the Master Catalog the materials are not getting deleted in TREX.
Please advice.
Thank you very much,
CarpenterI have to delete the Product in SRM and this will delete the Index in TREX Search.
Thanks -
IQ09 - Different process for material with bacth Split and no Batch
Hello,
i want to know if IQ09 treats material with batch number and no batch in the same way for fetching the serial number.
view V_EQUI_EQBS_SML is used to fetch the serial numbers.
i just need to confirm if the process is same in case a material has batch & no Batch together.
Thanks
RenuHi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno -
Classification purchase order (with batch management)
Hi,
I need some help in the next situation:
I need to order a material with batch management. I've used the classification system to assign the material specifications to the material of a batch. When I create a purchase order I want to specify some caracteristics as a lowest level than the material level, but that specifications are not real, it's a kind of a limitation.
I don't now if I can use some classification of purchase order or somthing like that.
Thanks a lot and regards.Create characteristics CT04
Process to create class CL02
when you create a class with type 001 it is Material class, it means when you assign the class at the material level you are assigning those characteristics to the material not to the specific batches.
But if you create a class with type 023 it is batch class. You will assign this class at the material when creating in MM01 under classification tab and check the Batch management tab in purchasing or sales data while creating a material.
This will help you to classify each batch with different characteristic values. when you create the batch with MSC1n you batch will be automatically classified with the batch class from material and you can give the values over there.
You can give the values for the batch when you receive the batch in MIGO, even though u give the batch in PO u can give the details in classification for that batch in MIGO when u receive it in the item tab "Batch" there is button classification to give those values.
hope it helps. -
STO(MM) withe batch number
Dear ALL SAP Gurus,
I am doing STO ( MM ) for raw materials.I issue the material with batch numberxxxxx from supplying plant, but while recieving the material to other plant(GRN) new batch get created. How can same batch will come default.
Also while issuing the material through MIGO transaction mov type 351, there is tab -stock transfer at item level in that batch number field is grayed out.How can we make this filed as editable......
Please suggest
MaheshHi,
Wt u have written is right, so SAP also suggests send the same batch number while u r doing STO (351 or 301) so the batch remains same in both the plants, no confusion in that.
Wn u donot select the batch for receiving plant,the system thinks since the material is batch activated it will generate a new batch number,
plz do give the same batch number .
thanks -
Cannot Import Video made with iMovie for iPhone/iPod Touch
I edited a video on my iPod touch using Apple's iMovie. The resulting .MOV file that iMovie creates will not import into iPhoto '11. While iMovie recognises the file just fine, iPhoto believes it is an unsupported file type. It's a .MOV for goodness sakes created with Apple's own hardware and program! Very strange. Just wondering if anyone else has had a similar experience.
Hey there. In answer to your question, all other clips that appear in my camera roll are easily seen by iPhoto. It is only those movies that I have created with iMovie for iPhone that iPhoto does not recognize. It's really strange, considering the fact that it's just a .MOV file. As a result, I've had to download a program called 'DiskAid' that allows me to transfer the .MOV file directly to my computer from the iPod Touch.
In answer to your question regarding whether or not iMovie for iPhone was worth downloading, I would have to say yes (assuming of course the import-to-iPhoto problem gets fixed). It's not a perfect program. My biggest complaint is that you have to import clips ONE at a time. There's no 'import all' option. This is really time consuming as you have to cycle through all the videos on your iPod or iPhone and manually tap each one and repeat. My dad likes to take a lot of 1-minute videos that then have to get spliced together and that can be really tedious with how this iMovie is currently set up. However, if you regularly think to add your clips to an existing project as you go along, things should be fine. It could do with a few more features and faster rendering times, but on the whole, it's a decent program. I have a feeling, though, that it was designed more for the YouTube generation who want to upload a five-minute video instead of people like my father and I who like to edit an hour or so and then eventually burn to a DVD. iMovie for the Mac still CERTAINLY has it's place. -
Hyperlinks with Keynote for iPhone/iPod Touch
Hello, everyone. I bought Keynote hoping to use it to make classroom presentations with my iPod Touch, Apple's VGA adapter cord, and a projector. Although Keynote presentations show up through the projector through the VGA cord, it is not possible in Keynote's full-screen mode to activate any of the presentation's hyperlinks. On the iPod Touch alone (w/o VGA cord), a double-tap on a hyperlink opens it up in Safari. But this is of little use because A) without VGA adapter, no public presentation at all, and B) Safari on iOS is not (yet) compatible with the VGA adapter anyway.
Does anyone know of a way around this problem? Or how to lobby Apple to modify Keynote to allow for easy hyperlink triggers within a presentation, and to modify Safari to be compatible with the VGA adapter (or allowing the user to set an adapter-friendly browser as the default one for hyperlinks in Keynote)?
Thanks.
Horatio08Hey there. In answer to your question, all other clips that appear in my camera roll are easily seen by iPhoto. It is only those movies that I have created with iMovie for iPhone that iPhoto does not recognize. It's really strange, considering the fact that it's just a .MOV file. As a result, I've had to download a program called 'DiskAid' that allows me to transfer the .MOV file directly to my computer from the iPod Touch.
In answer to your question regarding whether or not iMovie for iPhone was worth downloading, I would have to say yes (assuming of course the import-to-iPhoto problem gets fixed). It's not a perfect program. My biggest complaint is that you have to import clips ONE at a time. There's no 'import all' option. This is really time consuming as you have to cycle through all the videos on your iPod or iPhone and manually tap each one and repeat. My dad likes to take a lot of 1-minute videos that then have to get spliced together and that can be really tedious with how this iMovie is currently set up. However, if you regularly think to add your clips to an existing project as you go along, things should be fine. It could do with a few more features and faster rendering times, but on the whole, it's a decent program. I have a feeling, though, that it was designed more for the YouTube generation who want to upload a five-minute video instead of people like my father and I who like to edit an hour or so and then eventually burn to a DVD. iMovie for the Mac still CERTAINLY has it's place.
Maybe you are looking for
-
How can I sync just one folder of photos
I have created a photo folder which I want to use to sync photos with. I set up iTunes to sync just that folder. I added 4 new photos to the folder on my iMac, then tried to sync, butt he photos were not sent to my iPhone. Why not?
-
I have lost acess to most of my music in my itunes on my computer. I have a modern newish computer with windows 7 software and the latest version 11 Apple itunes software. Now all I get is amessage stating '' music cannot be found as original file ca
-
Edging problem "thin white line" between paths in Illustrator CS4...
I am making a map of Europe with Illustrator CS4 for a documentary about WWI and how the Versailles Treaty carved up imperial Germany. After having traced imperial Germany before Versailles, I then carve out the territories given to neighboring state
-
Why do i have a big red circle with a x on it
why do i have a big red circle with a x on it? i am talking about my ipod classic
-
Syntax Error with creating object
Hi, I am getting the following syntax error in the code below: non-staic variable this cannot be referenced from a static context job[ ] thread = new job(20); non-staic variable this cannot be referenced from a static context thread[index] = new job(