WithHold Tax with Decimals

Hi,
Is it possible to calculate the Withold Tax with value in Decimal places? i.e., If the base amount is 11111 and the withold tax % is 3 then the WT amount is 333.33 wherein SAP calculates it as 333 only. We had recently implemented B1 in Thailand and the requirement is that, the withold tax should be calculated with exact decimals and not rounded off.
When I checked the Withold tax definition, there are only 2 options for rounding off, either to a lower amount or to a higher amount and there's no option to keep it as it is.
Anybody has any solution?
sriram

Hi Adele,
It has nothing to do with the decimal places.
In the withold tax configuration, there are 2 types of rounding off methods available
"commercial values" or "truncated AU" and you need to select any one of them. commercial values setting, makes it to the next higher numeric and truncated au rounds it off to a lower value.
There is a possibility that, at the time of carrying out the A/R or A/P transaction, the calculation can be done manually and we can enter the amount with decimals and SAP takes it as it is. But when calculates it on it's own, then it doesn't. That's why I wanted to know, whether anybody else is having this problem and whether they have any solution in place?
sriram

Similar Messages

Adjusting Withholding tax with MIRO

For FI transactions like FB10 and FB60, the base amount can be adjusted during posting and after posting. With MIRO however, I canu2019t find a way to adjust during posting or after posting. Is this possible with MIRO?
Thanks,
Rich

Hi,
If you set the withholding tax code for your vendor in vendor master .....................
Then the withholding tax code will be defaulted in MIRO , check in header level there you can adjust the taxes......................
Hope this may help you.............

Calulate Withholding tax with Bapi

Hi Guys,
has anyone used BAPI_ACC_DOCUMENT_POST to post a vendor invoice and calculate withholding tax automatically.
Urgently needed.
Regards,
Tarun Bahal

Hi,
I've a problem related to idoc acc_document3.
I don't have the extended WT, only the "simple" one.
How can I post a document with WT but with a different base amount?
I.e. the invoice is for 15000 and I have a base amount of 10000.
Please help

Calculate withholding tax with bapi

Hi Guys,
has anyone used BAPI_ACC_DOCUMENT_POST to post a vendor invoice and calculate withholding tax automatically.
Urgently needed.
Regards,
Tarun Bahal

Tarun,
Just refer:
Urgent : Im not able to Post Withholding Tax in "BAPI_ACC_DOCUMENT_POST"
Amit.

Withholding tax amount in fbl1n report

hi,
In FBL1N report When the posting is coming from FB60 or manual invoice, the withholding tax amount will appear in the column but when the posting came from MIRO, withholding tax amount figures appear as zero values even there is a posting in the withholding tax account.

Hi,
Refer
SAP Note 363309 - Extended withholding tax with line item display.
Thanks
Aravind

Create withholding tax data subsequently for reconciled and open items in c

Hi All,
Mine is a US co code and I have a vendor for which invoice and payment documents are posted. After posting the invoice i found that the vendor is subjected to classic withholding tax which i did not calculate when posting invoice, making payments.
Now i have changed the vendor master data with relevant withholding tax details.
I know the program RFWT0020 allows us to create withholding tax data subsequently for reconciled and open items in cases where vendors or customers become liable for withholding tax with a tax rate of 0 %.
It is not working out for me.
Can any body help me on this.
Thanks in advance.

Dear all,
by se38 --> report documentation, You can read carefully the following:
The auxiliary program makes it possible to convert both classic and extended withholding tax data. However, with classic withholding tax, ONLY VENDOR data can be converted.
In addition, the program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
Recreating or changing the withholding tax data requires that the program first be executed for INVOICES and then executed for PAYMENTS in a subsequent step.
I hope this helps You.
Mauri

How to deactivate withholding tax base amount field

Dear Experts,
My in client is using the extended withholding tax with setting Define Formulas for calculating withholding tax, my client feel that the tax base amount field is open and user may accidentally input the wrong amount there thus can anyone tell me how to deactivate this tax base amount field?
thank you

Dear,
Go into Withholding tax type under SPRO>Financial Accounting Global Settings>Withholding Tax>Extended Withholding Tax>Calculation>Withholding Tax Type.
While maintaining the Withholding Tax type you have selected "W/tax base manual" under the control data. Just don't select that option then your requirement will be met.
There are other options also like Manual W/tax amt. which you might want to go for.
Regards,
Chintan Joshi.

BAPI_ACC_INVOICE_RECEIPT_POST withholding tax

Hi Experts,
I'm using the BAPI BAPI_ACC_INVOICE_RECEIPT_POST to post an vendor invoice. It is working fine with the normal posting. But when we post with withholding tax base, its not successful.
I have mapped the Withholding tax code, Business place and Section code to the correct parameters of bapi. Then inside the bapi I have supplied the withholding tax base to IT_ACCCR-QSSHB.
But I'm getting the message Balance in Transaction currency. But I'm sure that I'm passing the currencies correctly.
Please help me with the proper method of posting.
Thanks in Advance.
Edited by: Nivash S on Aug 24, 2010 12:32 PM

I got this working, so I will answer my own post with an explanation of the solution, in case it benefits anyone else.
There are numerous posts in the forum about calculating Extended Withholding Tax through a BAPI, and the solutions given tend to suggest that BAPI_ACC_DOCUMENT_POST will not work with EWT, but BAPI_ACC_INVOICE_RECEIPT_POST will work if you activate the user exit EXIT_SAPLACC4_001.
In investigating this, I found the following OSS notes most helpful:
OSS Note 306504 - Collective note: BAPIs for the AC Interface
OSS Note 556311 - BAPI in the extended withholding tax
OSS Note 487722 - Using EXTENSION1 for accounting BAPIs
Note 556311 explains how to implement extended withholding tax with BAPI_ACC_INVOICE_POST, by implementing a user exit that processes the EXTENSION1 parameter, and it provides sample EWT logic for that user exit. However, note 487722 explains how to implement Business Transaction Event RWBAPI01, to process the EXTENSION1 table from BAPI_ACC_DOCUMENT_POST.
By implementing the user exit logic from note 556311, in the BTE described in note 487722, the extended withholding tax was calculated correctly from BAPI_ACC_DOCUMENT_POST.

Withholding tax don't appear to the user

Hi all on SCN,
I have a new problem. It was created to a Company Code a Withholding Tax, with all needed configuration.
It works properly on Development environment, generating the values correctly, but don't works on pre-production or production, even its transport request was moved with all configuration to these environments without errors.
I'm starting to be crazy, because I checked all config on three environment, and its equal on all environments..
Does someone has a tip to me?
Thanks a lot!

Hi Sankar,
What I'm stating is that the Vendor has the entry on the tab Withholding tax accounting, but when he uses F-43 transaction, select the Vendor and goes to the next screen, apper to him the Withholding tax buttom.
By clicking in this buttom it will apper the apllicable Withholding taxes, but one of the four registered to the Vendor don't appear.
All config to the WT were done correctly, and its available and applicable to teh Vendor, but is not acting on it.
Could you help me, please?
Thanks in advanced for your answer!
Paulo Rosa

How to clear line items with withholding tax manually

hi Experts,
i posted a vendor invoice with withholding tax and i made payment as well but not through f-58.
now i wanted to clear these two through f-44 but it gives the message withholding tax information ignored and didnt display the invoice as open item.
how do i clear both the trasactions
regards
suresh

hi Praisty,
thanks for the reply
i have a second opinion on your statement that no matter whatever tcode you use for payment it will clear the open item. Even in F-58, if u make partial payment it will not clear you open item. But i didnt use f-58 as i said earlier.
i used FBV1 for parking the document through which i entered the payment details...ofcourse it doesnt have the option for clearing the open items, cheque printing and it will not update your cheque register. i posted the parked document through FBV0. for all practical purposes, this is my payment document but it didnt clear my open item, in order to clear it i now used f-44.
regards
suresh

Problem creating A/R Invoice with Withholding tax data via DI-Server

Hi!
Using the following SOAP Request to the DI-Server, I wanted to create an A/R Invoice having a withholding tax data but it always respond with an error saying
Total taxable amount of all rows exceeds the base amount [INV5.TaxbleAmnt][line: 1]
SOAP Request:
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Header>
    <SessionID>203A3C01-7808-4638-8322-2307DF3C0F8F</SessionID>
</env:Header>
<env:Body>
    <dis:Add xmlns:dis="http://www.sap.com/SBO/DIS">
      <Service>InvoicesService</Service>
      <Document>
        <DocType>dDocument_Items</DocType>
        <HandWritten>tNO</HandWritten>
        <DocDate>2010-02-08</DocDate>
        <DocDueDate>2010-02-08</DocDueDate>
        <TaxDate>2010-02-08</TaxDate>
        <VatDate>2010-02-08</VatDate>
        <CardCode>NPI</CardCode>
        <Comments>test di-server soap message 1</Comments>
        <DocumentLines>
          <DocumentLine>
            <ItemCode>TRC</ItemCode>
            <Quantity>1</Quantity>
            <Price>1000</Price>
            <TaxCode>OVAT</TaxCode>
            <VatGroup>OVAT</VatGroup>
            <TaxLiable>tYES</TaxLiable>
            <WTLiable>tYES</WTLiable>
          </DocumentLine>
        </DocumentLines>
        <WithholdingTaxDataCollection>
          <WithholdingTaxData>
            <WTCode>C140</WTCode>
            <TaxableAmount>1000</TaxableAmount>
            <WTAmount>100</WTAmount>
          </WithholdingTaxData>
        </WithholdingTaxDataCollection>
      </Document>
    </dis:Add>
</env:Body>
</env:Envelope>
OVAT rate above is 10%.
The withholding tax code C140 is setup as
rate=10,
Category=Payment,
Base Type=Net,
% Base Amount = 100,
Rounding Type = Commercial Values.
We are using the New Zealand/Australia localization in SAP B1 2007A PL49.
The above code can be successful only if I set the <WithholdingTaxDataCollection> node to:
        <WithholdingTaxDataCollection>
          <WithholdingTaxData>
            <WTCode>C140</WTCode>
            <TaxableAmount>0</TaxableAmount>
            <WTAmount>100</WTAmount>
          </WithholdingTaxData>
        </WithholdingTaxDataCollection>
setting TaxableAmount equal to 0 which is not desired.
Can anyone extend me some help, please?
Thanks.

Albert,
Did you try adding this via the DI API and not the DI Server? Do you get the same error? Please see this SAP Note ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001303019
Eddy

How to post a PARK document with Withholding Tax

Hi All,
I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
"Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
My entries are :
29J Vendor a/c Dr.
50 XYZ a/c
If i using F-02 and not parking ;then it is getting posted.
Note: Line Item is a special G/L Indicator
Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

Hi Parag,
Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
But,when posting the parked document ,it is asking for Section Code.
The error message displayed is:
"Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

F110: how to pay an invoice with Withholding Tax and a credit memo?

Hi All,
in my SAP I've defined a Withholding Tax type for Payment Posting.
I've posted a vendor invoice with with Withholding Tax.
Later I've posted a credit memo with Withholding Tax which must compensate the prevuois invoice.
When I launch t.code F110, SAP, in the right manner, proposes to pay the invoice less the amount of the credit memo.
But the calculation of the Withholding Tax (that it should post al the payment time) is wrong: SAP proposes to post the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the invoice. Instead, from it, SAP should detract the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the credit memo.
Why does SAP doesn't consider the amount of the Withholding Tax of the credit memo?
Could anyone help me?
Thanks

Dear Rossi,
if You defined the WT TYPE at the payment time this means that the WT amount will be calculated at posted during the F110 run as per the invoice as per the credit memo.
If they are the same amounts and refer to the same wt type and code, when You run F110, they should match even for the WT calculation. It is clear that if You inserted manually the WT base amount or the WT amount into the invoice, the system will not do any automatic calculation but it will use these amounts that can be different from the one auto matically calculated by the system for the credit memo.
I hope this can help You.
Mauri

BAPI_ACC_DOCUMENT_POST for debtor with withholding tax

Hello,
I'm using the BAPI_ACC_DOCUMENT_POST to generate debtor invoices applying withholding tax.
In order to obtain the withholding tax information, I'm using structure ACCOUNTWT, but when the document FI is generated, it has not line item for withholding tax, and table WITH_ITEM has no values for basis amount and withholding tax import, though the withholding indicator is there.
With help of a colleague from basis team, I've been debugging the process and all the parameters seem to be OK. So I guess there's something missing that is doing table WITH_ITEM is being informed incorrectly.
Another point is that I'm not sure if it's necesary to inform component SECTIONCODE (Withholding tax section) in structure BAPIACAR09 (Debtor position), and in this case, which value it expects to be passed.
Could you, please, help me with this issue? Any idea will be welcome.
Many thanks in advance.
Best regards,
Miriam.

Hi Maurizio,
Many thanks for your reply!
I've checked the parameters you said, and they seem not filled. I'm going to ask a basis colleague for analyzing what's missing and doing the corresponding modifications.
Thank you very much once again
Regards,
Miriam.

Withholding tax lines are being cleared along with other line items

Hi All,
While doing J1INCHLN(payment making of TDS), system giving error i.e.
"Withholding tax lines are being aleared along with other line items"
Please suggest me in this issue...it would be great help for me.
Thanks,
Saisri

Hi,
As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
We have many documents of such nature and as per me it is because of these documents the system is throwing error. Pls. advice as to how to proceed on this.
Thanks,
Saisri

WithHold Tax with Decimals

Similar Messages

Maybe you are looking for