Withholding tax amount is not updated in with_item table

Dear all,
In our system, one vendor invoice posted through FB60. In which, system generates withholding tax lin item. The same line item shows in BSIS and WITH_ITEM tables. It also shows in GL account line item display as open item. But, in WITH_ITEM table system not calcuate tax amount and shows as nil withholding tax amount against withholding tax base amount because of this I will get error at the time of creating challan through J1INCHLN.
Please help us though there is statutatory payment due date.
Regards,
Kalpik

Hi Raghvendra,
Thanks for reply. Why system is not update withholding tax amount only for that particular document ?
So, we can take precaution in future also.
Regards,
Kalpik

Similar Messages

  • Tax Amount is not updated into BSEG

    Dear All,
    I have recently added a tax amount field MWSTS from table BSEG into FBL1N - Vendor Line Item Display. To my surprise the input tax amount is not updated into BSEG table. The input tax is normally posted using either MIRO or FB60.
    Any one has the same problem? Can please kindly share how to fix the problem?
    Thanks in advance for your kind assisstance.
    rgds,
    Dahlia

    Thanks Andreas,
    However I do believe that it should be updated into BSEG - MWSTS as we have mutliple companies in different countries in the system. All the other companies have the input rate updated into BSEG - MWSTS for the vendor line item, only the company for India is not updated.
    Yes, BSET do have the tax amount updated but I can't use BSET table in FBL1N. I need to provide the tax amount information for each vendor line item in FBL1N.
    thks
    Dahlia

  • FBL1( VENDOR LEDGER REPORT)-  Withholding tax amount is not coming .

    in FBL1 ( vENDOR lEDGER rEPORT) - WITHHOLDING TAX AMOUNT IS NOT CMING IN COLUMN  QBSHB OF FBL1.
    Purchasing document number is not coming also.
    How these fields may appear in the above said report. Is any config missing ?
    Thanks in advance
    M K Agarwal
    9967029930

    TDS posted from MIRO will not reflect in line item report, i have taken opinion from SAP for the same issue few days back, SAP has given the following opinion.
    *With reference to the difference in behaviour as compared to the document posted for example from MIRO which is an MM transaction and FB60 which is a FI transaction please note the following:
    The withholding tax amount that you are using i.e. Field BSEG-QBSHB is designed to fill for the classic withholding tax. And extended withholding tax information is stored exclusive in table WITH_ITEM.
    Also note that MIRO does not give the user the control in case of Classical withholding tax. It only supports Extended withholding tax. Hence it does not populate BSEG fields in case of Extended WT.
    So in MIRO, the data for extended withholding tax are saved within the table WITH_ITEM and not within the table entry BSEG-QBSHB. The latter isnot updated during the procedure. Furthermore it is not possible to select data from table WITH_ITEM
    within the transaction FBL1N in a transparent and unique way, as FBL1N only reads BSEG / BSIK / BSAK tables.
    In your line layout,you define a field BSEG-QBSHB. But actually the field of vendor/customer line item is filled with zero from FI. Thus,it shows zero in line item display*
    Please review note 363309 for detailed explanation and explains the functionality which is valid even for your release.
    So it is not possible to display withholding tax information in the line item display transactions, since this information is not
    held in the BSEG / BSIK / BSAK tables, but is instead stored in the WITH_ITEM table.
    Please convey to your client, standard SAP will not show the TDS information in line item reports, documents posted from MIRO and refer  the note 363309.

  • In fbl1n report for document type RE  withholding tax amount is not showing

    in fbl1n report for document type RE  withholding tax amount is not showing
    in sap note 363309 determines
    Solution
    Remove the field which contains the withholding tax information (field BSEG-QSSHB) from your display
    variant.
    If you want to display the withholding tax information, double-click on the document number and
    subsequently choose 'Withholding tax'.
    my doubt is we remove the field BSEG-QSSHB in layout how can show the withholding tax amount in FBLIN report
    how to remove from the layout
    please clarefy
    bhayyapu   

    Hi,
    If you want to check amounts of withholding tax for the vendors, you have some options to view it. You can access the WITH_ITEM, LFC1 tables by SE16. You have too the S_P00_07000134 report. This report is developed for the Colombia but I already used for the another country with the ABAP development for this country.
    Also you can use table join BSIK and WITH_ITEM by SQVI for the open items and BSAK and WITH_ITEM for cleared items. It is more simple and fast.
    JPA

  • Item's withholding tax amount is not zero

    Dear All,
    When ever we clear the vendor account through f.13 system was showing the below mentioned message.
    S No customer documents selected
    S No G/L account documents selected
    I Only accounts with debit and credit postings are included
    X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 1
    X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 2
    I Stop date " 02.01.2010 Stop time " 17:00:00
    Client is asking no need to show Items withholding tax amount is not zero message.
    Where as the clearing criteria is business place .
    Regards,
    Teja

    Hi,
    please refer to the note 499902 and 442588 for the explanation why the transaction F.13 has given out
    this error and which transactions (FBZ2 or F-53) should be used to clear the items with the withholding tax info maintained.
    Reg
    Madhu M

  • SRM 7SC item overview screen -Tax amount is not updated on change of Zfield

    Hi ,
    We use z function module for tax calculation , which is updated in table BBP_FUNCTION_MAP.
    Which works fine for standard fields changed.
    Now if we change one of z field ( which is part of tax calculation in z FM ), tax amount is getting correctly calculated in above Z FM ( we can see in debugging),  but not updated on SC UI screen.
    Same will be updated if we change standard field like price , mat grp etc.
    Please let  me know , how we can refresh this UI for tax amount in SC.
    Regards,
    Nilesh

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • In Withholding Tax, Amount is not appearing in Remittance Challan

    Hi,
    I have done WHT configuration in Implementation project, This is my 1st Project and I am new in SAP, I am facing following 2 Problems
    1) Remittance Challan is getting prepared.but amount is not showing in the remittance challan, all the process till Certificate is happening smoothly. Please advice, where my settings went wrong or If I missed something in the configuration?
    2) Please also guide or tell me the steps for configuring E-TDS filing.
    Again requesting to kindly provide the solution.
    Thanks
    Regards
    Sunil

    Your Qn. No.1 is answered in the following thread.
    Re: WHT Error while J1INCHLN ?

  • Service tax deferred tax code entries not updating DEFTAX-ITEM table

    Dear Friends,
    We are using SAP ECC 6.0. We have configured service tax receivables through deferred tax codes.
    Based on the OSS ntoe 921634 we did all the changes & activated this event also.
    Event     Product                     Application     Function Module
    1025     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM
    1030     DEFTAXRU             FI-TAX     SET_DEFTAX_ITEM
    1040     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM_REVERS
    1050     DEFTAXRU             FI-TAX     CREATE_DEFTAX_ITEM_MR1M
    After this changes also the values are not updating the table DEFTAX-ITEM. So while running programme RFUMSV50 - Deferred Tax Transfer (New) the values are not flowing.
    Please help me to solve this issue
    Thanis
    Christopher.J

    HI,
    Please help us.  We are also in the same status.  How can we solve this issu?
    rajeswari

  • Withholding tax amount is nit showing in FBL1N

    Hello,
    When I go to FBL1N and selected "Withholding tax amnt" and "With.tax base amount"from the layout, Withholding tax amount is not showing documents posted through MIRO, but it is showing for documents posted through FB60.
    Can any one kindly advise
    Regards,
    Lakshman.

    Please be kindly aware that:
    in Extended withholding tax, the withholding tax information is stored                             
    in table WITH_ITEM. For a vendor or customer line item of table BSEG,                              
    there maybe a lot of withholding tax information and therefore several                             
    entries in table WITH_ITEM.                                                                               
    It is not technically possible to display a lot of withholding tax                                 
    information for a customer or vendor line item in the line item display.                           
    To always keep the data consistent when you use several withholding tax                            
    types, the system does not update the fields, that were originally                                 
    filled for the classic withholding tax, for document changes.                                      
    All of the relevant withholding tax data is stored exclusively in table                            
    WITH_ITEM.                                                                               
    It basically does not make any sense to use the withholding tax fields                             
    of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the                           
    activated extended withholding tax.                                                                               
    Solution:                                                                               
    Remove the field which contains the withholding tax information                                    
    (fieldBSEG-QSSHB) from your display variant.                                                                               
    If you want to display the withholding tax information, double-click on                            
    the document number and subsequently choose 'Withholding tax'.                                                                               
    Please go through the note 363309.   
    About MIRO please be informed that You can see the WT data into MIR4 only if You insert them manually. If not the WT tab remains empty but the System correctly will fill the WT data into the FI follow on document.
    I hope this helps.
    Mauri

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • In vendor line item not showing withholding tax amount and withholding base

    Hi Gurus,
              When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
    Thanks & regards,
    Dharma.

    Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
    So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
    this would give us some help or hopefully the answer..
    regards

  • Error Message FF747  -The tax amount must not be greater than the tax base

    Hello,
    We are attempting to post an import vendor invoice through transaction    FB60 for Israel company code . Since the tax charged by the vendor is not fixed every time , we are entering the tax amount in the    FB60 screen manually , without selecting 'calculate tax'.The amount of tax is greater than the amount of expense as per the real business scenario. For example amount of expense is 100, amount of tax is 200 and the total amount charged by the vendor is 300 .However when we simulate the posting we get an error - The tax amount must not be greater than the tax base-Message no. FF747
    We tried putting a very high percentage in the tax code also but it didn't help
    We would like to go ahead with this posting. Could you pl throw light on the same . ? Is there any way (OSS note ) or a work around which can resolve the issue ?
    Best Regards
    Amit  Kulkarni

    Hello
    This may be  a work around in other cases , but since we want the amount to be updated in the BSET table for further VAT reports , we would like  this to be posted along with the expense item

  • Withholding tax amount in fbl1n report

    hi,
    In  FBL1N report When the posting is coming from FB60 or manual invoice, the withholding tax amount will appear in the column but when the posting came from MIRO, withholding tax amount figures appear as zero values even there is a posting in the withholding tax account.

    Hi,
    Refer
    SAP Note 363309 - Extended withholding tax with line item display.
    Thanks
    Aravind

  • Withholding tax amount exceeds the customer/vendor line item amount 001

    Hi Guys,
    I am trying to release an invoice using VF02 transaction but I recieved the below error message:
    Message no. 7Q321
    Withholding tax amount exceeds the customer/vendor line item amount 001
    There are 2 SAP (718078 and 513201) notes regarding that but they are not applicable in ECC 6.0.
    How can I figure out this issue?
    Thanks,
    Daniel Dorta

    Hi,
    This may happen because you have give base exemption and after that charge tax. In this case you have posted earlier invoice w/o wht and now you are posting the small amount of invoice on which wht is calculated including the earlier exempt amt. In this case the wht exceeds the base amt.
    In this case if possible you first post the invoice with sufficient amount which can deduct the WHT .
    If your scenario is different give details.
    Regards
    Milind Sonalkar

  • TDS TAX AMOUNT  IS NOT MACHING WITH INVOICE WTAX AMOUNTu2019

    Dear All,
    I am Facing Following Problem in TDS
    While creating an A/P Invoice after putting row level information when user click on u2018ADDu2019 button u201CWithholding Tax Tableu201D opens for deduction of TDS amount. When user selects u201CWithholding Tax Codeu201D in u201CWithholding Tax Tableu201D to deduct TDS amount for an invoice system shows WTax amount as per rate of deduction. But when user click on u2018OKu2019 to u201CWithholding Tax Tableu201D window, WTax Amount will comes as zero on A/P Invoice window.
    Then when again user will go to u201CWithholding Tax Tableu201D and manually put the value of WTax Amount system reflects it on A/P Invoice window.
    In case when we set approval procedure to A/P Invoice, this invoice goes for an approval. After coming back as approved invoice when originator of invoice going to u2018ADDu2019 the same document system shows an error as u2018TDS TAX AMOUNT  IS NOT MACHING WITH INVOICE WTAX AMOUNTu2019
    please reply me ASAP
    Thanks & Regards,
    Swapnil

    hi
    try this
    We need to follow  the following steps
    u2022     Open the BP master for which TDS needs to be deducted go to the accounting tab followed by tax option and then  click on the checkbox subject to withholding tax
    u2022     Click on the option WTAX codes Allowed and select the TDS Category
    u2022     On the previous window click the check box pertaining the checkbox  u201CTDS OVERLOOKu201D
    Regards,
    Manish

Maybe you are looking for