Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

Similar Messages

  • Fieldname in not being displayed in the table maintenance

    Hi Experts,
                     I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
    on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
    everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
    plz help.
    Thanks n Regards,
    Mukesh

    Hello Mukesh,
    As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
    If you are assigning the data element and the field label is empty, then + sign will come. In other case -  if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
    In both the above cases, you can change the column header manually in the layout.
    Regards,
    Selva K.

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • P Tax is not getting displayed in the payslip

    Hi All,
    The P Tax is not getting displayed in payslip. I have checked the customization again but no use. In PA30 (IT0588) i have 'checked' the box for P Tax eligibility and have also assigned /3P3 in the form IN01 in window 2 (for deductions).
    Please help.
    warm Regards,
    Shruti B.

    Hi,
    Thank you All.
    Regards,
    Shruti B.

  • Excelicon is not being displayed in the alv output

    Hi,
         iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

    OSS# 1140542?
    or  you may search other.
    Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

  • Inspection Characteristic is not being displayed in the inspection lot

    I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
    But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
    Please let me know how to get the inspection characteristics in the order.
    I have checked the task list, in that the Inspection characteristics is visible.
    Please help
    Praneet

    I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
    Both the Inspection lot the task list is same
    Please reply

  • Run data not being displayed in the data view tab following a run

    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?

    Benbrax wrote:
    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?
    So they changed something?  You don't have a backup of the software, nor any kind of software control?  Where I work, you can't even run modified code on a production unit, else you just created an expensive "engineering unit."  Could be they deleted just one data wire and it may take you hours to find it.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • The expression is not being displayed in the alert inbox

    Hi,
    I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
    The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
    In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
    Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
    I appreciate your early response.
    Regards
    Ganesh

    Hi Venkat,
    Without using BPM, you can think/try out with triggering an alert from UDF:
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
    Also check out this Michal's blog on ALERT Configuration..
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Hope this wull help.
    Nilesh

  • Text Variables are not being Displayed in the Output of the Query

    Hi All ,
    We have some column headings , which are populated through the Text Vaiables , But in the Query Ouptput only the tech names of the Text variables are being displayed . can anyone tell me why its happening like this . I want to debug the Query , please guide me in this regard
    Thanks in Advance.. Pls reply me as soon as possible

    Hi Nagarjuna reddy,
    Click on the properties of the infoobject enter the name of the description and next to that you can see the X/? buttion click on the this button and select the field/if the proper field is not there then create a field descriton and select. i hope this is works and correct me if i am wrong. for debuggin the query use a transaction code- RSRT.
    regs,
    Vachan

  • Amount not getting displayed in the cube

    Hi,
    I have a ZTable which has got an Amount field declared like this.
    AMOUNT     WAERS     CUKY     5     0     Currency Key
    And I declared a ZAMOUNT as Amount in the cube and provided 0CURRENCY.
    Initially there was no value in the Amount column in the Ztable and hence could not see any value of Amount in the cube.But after entering values in the ZTable, I deleted the replicated the DS, create TR, UR and then create an InfoPckg and then created the Data Transfer Process. But still I am not able to see the Amount Value in the cube.
    Kindly Help
    Sam..

    > hi Sam,
    >
    > did you assign AMOUNT field from ztable to infoobject
    > ZAMOUNT in transfer rules ? move AMOUNT from left to
    > right in tab 'datasource./transf.rules ?
    > and ZAMOUNT mapped ? (with ZAMOUNT)
    >
    > hope this helps.
    Hi Edwin,
    Assigning and mapping which you mentioned is just pulling an arrow from the left Amount to right ZAmount, right? I did that. But there is an additional 0Currency on the right side without getting mapped? Should I map that also to Amount? Any issue with Rules.
    Regards,
    Sam...

  • Udf Data is not being displayed in the report

    Hi all,
    i have designed one report in which i am displaying some udf fields along with other system fields.
    i have not used any selection criteria.
    when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
    If i open sales order and press 'Shift-F2'  and update the document and now if i run report then i get that udf value in the report.
    why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
    pls suggest some solution.
    regsrds,
    Chetan.

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • JLable components not being displayed in the panel of the applet

    I am having the problem with the display of the JLabel components in the Panel component of the Applet.
    The JLabel components do not appear in the Panel of the applet unless i minimize or maximize the applet.

    hello...
    i just had the same problem... it was solved by using the .updateUI() method.
    in my case several textFields were dynamically added to a jpanel, there we called the method on that panel.
    ptf.updateUI();     
    hope it works.
    ----------++-----+
    ...algun dia todos seremos luz...
    -zoe

  • JLabel components not being displayed on the content Panel in Applet

    Hi everyone!!
    Plz give a solution to the following problem:
    I have an applet in which i have JPanel component and on that component i am adding a lot of JLabel components but the problem is that the JLabel components are not displayed on the applet unless i minimize or maximize the applet.
    kindly give solution to the problem.
    Thanks

    Howdy,
    code would be helpful. Here is a very simple JApplet that displays labels okay here in appletviewer. You talk of applets and JLabels. I assume you are using JApplets.
    import javax.swing.*;
    import java.applet.*;
    import java.awt.*;
    public class AppletPie extends JApplet {
         public void init() {
              Container cp = getContentPane();
              cp.setLayout(new FlowLayout());
              cp.add(new JLabel("Show"));
              cp.add(new JLabel("up"));
              cp.add(new JLabel("you"));
              cp.add(new JLabel("dumb"));
              cp.add(new JLabel("labels"));
    }Perhaps something in this code will help you to solve your problem.
    regards
    sjl

  • Plan values not being displayed in the report ..

    Hi All,
    I have a query on query.. .
    which displays actual and plan values , but the report is not showing the plan values
    tell me how to do this
    Sruthi

    Sruthi,
    Basically how do you store the data in the transaction cube's ?
    How does the data differs b/w Plan and actual for the same KF ?
    It stores depending on the Version...
    Restrict the KF to a perticular version ...
    Then you can get the desired...
    Check the LISTCUBE  with different versions..
    Cheer's
    HVR.

Maybe you are looking for