Withholding tax base amount problem
Hi experts,
I have WT configured like this:
Base amount: Gross
No accumulation
Minimum/maximum: Type level (both)
Central inv. prop. + Check min. base amnt at pmnt doc level
In minimum/maximum per Withholding tax type: Minimum base amount "$500"
The problem occurs when i try to pay an $250 invoice , the system calculates withholding tax for this case but it shouldnu2019t (because the invoice amount is less than $500). This vendor has only one invoice to pay.
The weird thing is this problem happen only for a few vendors, i´ve created a test vendor, exact the same as the "problem vendor" and for the new one, the system is not calculating the withholding tax (its working fine)... I donu2019t know what else should i see...
Thanks in advance
Jorge
Steve,
My problem is when i try to pay an invoice smaller than the minimum base amount, the system calculates the WHT. This problem is only with a few vendors, but others, with same master data are working fine. I never did changes in those vendor master data, so the program its no necesary in this case.
Thanks for answering.
Regards,
Jorge
Similar Messages
-
Changing Withholding tax base amount- 1099 invoice
Hi Friends,
Need your help again.
Using T. Code FB09, i can change WHT base as long as the invoice is not cleared. However, how to change WHT base where a particular invoice has been cleared?
I have actually made some cchanges to configuration where by i have removed tick for 'line item not cleared'. Ideally with this setting it should allow me to change to WHT base. But the same is not happening.
Can any one help me out with any other steps that are involved.
Thanks in advance,
Regards,
RajanikanthHi Rajanikant,
Please review note 363650 here you will see the following
information;
C) Change Rules for classical and extended withholding tax
If the withholding tax base amount should be changed after a
docment has been paid already, the following steps are required:
For Classical Withholding Tax and only if the withholding tax
amount is zero.
Change of withholding tax base amount or withholding tax code of a
cleared invoice.
If the withholding tax base amount and/or the withholding tax code
needs to be changed after an invoice has been cleared please follow
steps;
As you see from the above information the following quotation "only if
the withholding tax amount is zero".
If a withholding tax amount other than zero has been posted, you cannot
change the values via transaction FB02.
Please also review the IMG documentation for transaction OB32 via
spro -> Financial accounting -> Financial accounting global settings
-> Document -> Line item -> Document change rules, line item.
here you will see the following information;
Document Change Rules, Line Item
In this activity, you determine under which circumstances fields within
posted documents can be changed.
Note
For a number of fields, the system itself determines that they can no
longer be changed after posting. This includes all fields which are
central to the principles of orderly accounting, for example, the amount
posted and the account.
The system also prevents the update objects from being changed in
documents which have already been posted, independent of the document
change rules
Thus as you can see from the above description if an amount has been
posted to the account you cannot change the fields despite entering in
the field in OB32 as changable.
with kind regards
Cora -
LSMW RFBIBL00 withholding tax base amount in local currency cannot be updated by manual
Hi SAP Guru,
When I try to upload FI docs by program RFBIBL00 in LSMW, the field BWITH-WT_QSSHH(withholding tax base amount in local currency) cannot be updated.
(1) The LSMW structure is defined as bellow:
BGR00<--------DOC_HEAD
BBKPF<--------DOC_HEAD
BBSEG<--------DOC_ITEM
BWITH <--------DOC_WHTX
And fields in structure BWITH are defined as bellow:
Field Name
Type
Length
Field Description
STYPE
C
1
Batch Input Interface Record Type
WITHT
C
2
Withholding tax type
WT_WITHCD
C
2
Withholding tax type
WT_QSSHB
C
21
W/tax base amount in document currency (batch input
field)
WT_QSSHH
C
21
W/tax base amount in Local currency (batch input
field)
(2) When I run LSMW, the doc can be posted successfully. All the information can be updated as the data I upload. Only the field WT_QSSHH is calculated by system automatically according to the current foreign exchange rate.
(3) When I try to post this doc by manual(F-02), the field WT_QSSHH is not editable.
How can I change the field WT_QSSHH into editable and update this field in LSMW RFBIBL00.
Thank you very much!
EricHi Nikitha,
I tried posting an invoice in currency other then co. code currency, but the WT amount is getting calculated perfectly.
also checked vendor with foreign curr recon account. the WT is working for that also
Can you please share the screen shot of the transaction where after changing currency you are not getting the values picked up for WT
May be i have not understood your questions
Regards
Pragya -
Withholding tax base amount is wrong for sales invoice
Dear Gurus,
we had generated invoice for cop (colombia paiso) 1377350 as follows
sales a/c cr 1080000
sales a/c cr 90000
sales a/c cr 114400
sales a/c cr 92950
vat a/c cr 33176
w/h a/c dr 36911(withholding tax account)
customer a/c dr 1373615
The wiholding tax rate is 3.5%. it is applicble only for first line for cop 1080000. we had applied withholding condition to that line only. The vat amount cop 33176 is 16% on cop(92950+114400). There is no withholding tax or vat on line for cop 90000. when we post the invoice, the withholdng tax base amount change from 1080000 to 1054598 and system post the wihholdng tax for cop 36911 instead of 37800. In sales invoice there is no possibility to change the base amount mannually in condition. it is grey area.
we had check the configuration part about maxmimum amount,minimum amount,withholding tax base amount,calculation procedure.withholding tax type,withholding tax code. Nothing is found wrong.
you early answer is highly appreciated
Reagrd,
Rajesh KHi
Cheque Go to Menubar of which document you have to post for getting the WHT value Menubar Settings - editing options - remove the tick calculate tax on net amount.
Rgds
Vani -
Changing Withholding tax base amount- 1099 payment
The scenario is:
Classic withholding tax functionality to be used for first time, the configuration was done last year.
1099 needs to be printed with all payments made out to the vendor.
There were payments made out to the Vendor in year 2011. There are some payments that show as WT exempt amount in RC and other payments are displayed as WT base amount in RC while running RFIDYYWT or 1099 print out report.
I used RFWT0020 program to regenerate the WT and Change to source tax code. It just updates the tax code on the payment document but is not changing the payment document amount from WT exempt to WTax base.
So the 1099 printout is not showing the total payments made, it is excluding WT exempt amount in total.
Any suggestions?
Thanks
Edited by: Gary_S321 on Jan 11, 2012 10:30 PMRebecca,
You need to update the WTax base amount field on all the payment documents that are blank.
For that just go to Vendor line item report FBL1n and run it for all the 1099 vendors. Change the layput to add WT base amount and WT Code in the report output. Filter the documennt type with payment doc types ZP and KZ and WTax base amount zero.
Extract these transactions into excel and then write LSMW to mass update these tax base amount field.
To update only Tax code on these transaction you can use RFWT0020 program.
Hope this helps.
Thanks -
How to deactivate withholding tax base amount field
Dear Experts,
My in client is using the extended withholding tax with setting Define Formulas for calculating withholding tax, my client feel that the tax base amount field is open and user may accidentally input the wrong amount there thus can anyone tell me how to deactivate this tax base amount field?
thank youDear,
Go into Withholding tax type under SPRO>Financial Accounting Global Settings>Withholding Tax>Extended Withholding Tax>Calculation>Withholding Tax Type.
While maintaining the Withholding Tax type you have selected "W/tax base manual" under the control data. Just don't select that option then your requirement will be met.
There are other options also like Manual W/tax amt. which you might want to go for.
Regards,
Chintan Joshi. -
Unable to Change Withholding Tax Base Amount while creating Service AP Invoice through DI API?
Dear All,
I am trying to create Service AP Invoice through DI API.
If I post the document without changing SAPPurchaseInvoice.WithholdingTaxData.TaxableAmount the dount ocument is created in SAP without any problem.
But if I change amount in above field then DI API throws error Unbalanced Transaction.
If I post same document in SAP with changed base amount it got posted in SAP without any Issue.
Where I am doing wrong?
please guide.
Using:
SAP B1 version 9 Patch Level 11
Location : India.
Thanks.Hi ,
maybe you can find solution to these note 1812344
1846344 - Overview Note for SAP Business One 8.82 PL12
Symptom
This SAP Note contains collective information related to upgrades to SAP Business One 8.82 Patch Level 12 (B1 8.82 PL12) from previous SAP Business One releases.
In order to receive information about delivered patches via email or RSS, please use the upper right subscription options on http://service.sap.com/~sapidp/011000358700001458732008E
Solution
Patch installation options:
SAP Business One 8.82 PL12 can be installed directly on previous patches of SAP Business One 8.82
You can upgrade your SAP Business One to 8.82PL12 from all patches of the following versions:8.81; 8.8; 2007 A SP01; 2007 A SP00; 2007 B SP00; 2005 A SP01; 2005 B
Patch content:
SAP Business One 8.82 PL12 includes all corrections from previous patches for releases 8.82, 8.81, 8.8, 2007, and 2005.
For details about the contained corrections, please see the SAP Notes listed in the References section.
Notes: SAP Business One 8.82 PL12 contains B1if version 1.17.5
Patch download:
Open http://service.sap.com/sbo-swcenter -> SAP Business One Products -> Updates -> SAP Business One 8.8 -> SAP BUSINESS ONE 8.82 -> Comprised Software Component Versions -> SAP BUSINESS ONE 8.82 -> Win32 -> Downloads tab
Header Data
Released On
02.05.2013 02:34:18
Release Status
Released for Customer
Component
SBO-BC-UPG Upgrade
Priority
Recommendations/additional info
Category
Upgrade information
References
This document refers to:
SAP Business One Notes
1482452
IN_Wrong tax amount was created for some items in the invoice with Excisable BOM item involves
1650289
Printing Inventory Posting List for huge amount of data
1678528
Withholding amount in the first row is zeroed.
1754529
Error Message When Running Pick and Pack Manager
1756263
Open Items List shuts down on out of memory
1757641
Year-end closing
1757690
SEPA File Formats - New Pain Versions
1757898
Incoming Bank File Format
1757904
Outgoing Bank File Format
1762860
Incorrect weight calculation when Automatic Availability Check is on
1770690
Pro Forma Invoice
1776948
Calendar columns are wrong when working with Group View
1780460
OINM column description is not translated
1780486
UI_System crash when you set extreme value of double type to DataTable column
1788256
Incorrect User-Defined Field displayed in a Stock Transfer Request
1788372
ZH: 'Unacceptable Field' when export document to word
1788818
RU loc: No freight in the Tax Invoice layout
1790404
Cash Flow Inconsistency when Canceling Payment
1791295
B1info property of UI API AddonsInstaller object returns NULL value
1791416
Adding a new item to BoM is slow
1794111
Text is overlapping in specific localization
1795595
Change log for item group shows current system date in all the "Created" fields
1797292
Queries in alerts should support more query results
1800055
B1if_ Line break issue in inbound retrieval using JDBC
1802580
Add Journal Voucher to General Ledger report
1803586
Not realized payment is exported via Payment Engine using 'SAPBPDEOPBT_DTAUS' file format
1803751
Period indicator of document series can be changed although it has been used
1804340
LOC_BR_Cannot update Nota Fiscal Model
1805554
G/L Account displayed in a wrong position when unticking the checkbox "Account with Balance of Zero"
1806576
Payment Cannot Be Reconciled Internally
1807611
Cannot update UDF in Distribution Rule used in transactions
1807654
Serial No./Batch inconsistency by canceled Inventory Transfer
1808694
BR: Business Partner Code cannot be updated with CNPJ CPF error
1809398
CR_Cannot Display Related Multi-Value Parameters
1809758
Arrow key not work for Batch/Serial Number Transactions Report
1810099
Tax Amount is Recalculated Even if Tax Code Is Not Changed
1811270
Upgrade fails on Serial And Batches object with error code -10
1811846
Cannot run Exchange Rate Differences when multi branch is activated
1812344
Withholding Tax Amount Is Not Updated in Payment Once Witholding Tax Code Is Changed in Document through DI API
1812740
DI:"Operation Code" show wrong value when add "A/P Tax Invoice" based on "A/P Invoice"
1813029
US_Vendor address on 1099 Summary by Form/Box Report is not updated according to the latest Invoice
1813835
Wrong amounts of Goods Return in Open Item List
1814207
Preliminary page prints setting does not keep after upgrade
1814860
Value "Zero" cannot be imported to "Minimum Inventory Level" field via Excel file
1815535
RFQ: Web front end not displayed in supplier language
1815810
GT: Adding Incoming Payment for Some Cash Flow Relevant Accounts Fails
1816191
BR:System Crashes While Working with Tax Code Determination Window
1816611
CR_Crystal Report Displayed Incorrectly Afte -
Error:withholding tax base amount exceeds the amount of customer/vendor lin
Dear Team,
I am encountering an issue while doing f-48.I am providing you brief explanation below:
There are two different down payment request has been made against two difference P.Ou2019s.
1. Down payment amount for P.O No. 3600011383 is Rs. 581235/- and
2. Another Down Payment for P.O No. 3600011395 is Rs. 1162470/-
Now we want to deduct the TDS against Sl No. 1 is Rs. 21,50,570 ( i.e., Rs. 581235+1569335 (P.O No. 3600011383
Simply, TDS Deduction are as follows :
Sl No. 1 Withholding Base amount should be 2150570/- instead of 581235/- and
SL No. 2 Withholding Base amount should be Rs. 1162470/-.
Plz do the needHi Rajeswari ,
The amount is mentioned as the base amount in PO.At the time of Downpayment they want to change the base amount instead of 581235 the user want to give the base amount 21,50,570 the mentioned like.But system is showing the message like the above .Plz let me know.
Regards,
Suma. -
Hi,
I have 2 withholding taxes for a vendor but I only want one of them to be picked up for related transaction.
But I encounter is, the system calculate withholding tax for both taxes. Please advice how can I choose one of them for a transaction.
Thank you.Hi,
If I untick the liable, i am unable to process the invoice for payment.
Therefore, I manually delete the not related withholding tax code from the invoice.
Thank you. -
Downpayment Clearing assumes Withholding tax base as 0, but calculates withholding tax
Hello All,
I have found a strange issue while trying to do a downpayment clearing. I tried to clear the downpayment with the invoice, while simulating before posting, the withholding tax line was simulated. After posting it, i found that the Withholding tax base amount has been taken as 0 and the tax amount has been calculated. Any reason how this could have happened?
Thanks,
LeenaHi Leena,
Check the field WT_MASMAN in Table With_Item.
The fields mentions whether the base amount has been entered manually.
Normally, during posting, even if you put your cursor in the Tax base field, the System considers it as entered manually (even though you have not enetered anything).
BR
Amitash -
With holding tax base amount for 1099 vendors with discounted payment term
Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PMDear All
i am also having the same problem. The example is
Net invoice Value = $ 100,000
Input Tax @ 15% = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar -
Tax Base Amount calculated wrongly
Dear Friends,
While posting a MIRO with a manually enter tax base amount, the amount doubles whenever I click on another tab like basic data and come back to tac base amount.
For e.g. I have a PO for 10000, now I am posting an invoice for the same but I have to pay only 9000 to the vendor because 1000 has been deducted as a penalty for late delivery.
Now I enter a MIRO, with reference to the purchase order and enter 9000 in the line item and trying to enter 10000 in the field Tax Base amount under the Tax tab.
Now whenever I change tabs, i.e if I go to Basic data and come back to Tax Tab, the amount has been changed to 19000. If change tabs again, it changes to 28000 and so on...
Not sure if this is a bug or has anyone faced this issue? Can anyone suggest a note or a solution...
Thanks,
Hari DharenThank you Mani Kumar,
But that's what we already have in customizing:
The problem is that during Invoice Verification (MIRO) we specified that only one of the items is eligible to Cash Discount (we set for item #2 that it is W/o Cash Discount):
The invoice is posting correctly identifying the correct disc. amount of 1,500 (50,000*3%):
The problem is during the Payment Run where the system determines a Cash Discount that applies but when calculating the W/Tax Base Amount it do the following:
51,000*3% = 1,530
W/Tax Base = 51,000 - 1,530 = 49,470 usd
F110 Proposal generated:
It is false that the Cash Discount applies to all items, the expected result should be:
(only eligible items for Cash Discount) 50,000*3% = 1,500
W/Tax Base = 51,000 - 1,500 = 49,500 usd not 49,470
Thanks -
GL Line Item with Tax Base Amount Posting
Dear Expert,
I have a GL account with tax and CO object. And, I am using BAPI_ACC_DOCUMENT_POST to do the GL posting. I would like to post the GL line item with tax base amount as it will show in FB03 line item, the posting is successful but no base amount is in GL line item in FB03. (I can manually post it in Tcode FB50).
Any idea on this and what is the problem? Appreciate if can help..
Thank you.
Best Regards,
WengHello Weng,
I also looked on SAP notes.
There is a note with much information about Tax Postings with accounting BAPIs and it's a consulting note. The note number is 626235.
Regards,
Rae Ellen Woytowiez
Edited by: Rae Ellen Woytowiez on Dec 21, 2010 10:11 PM -
Tax base amount in MIRO transaction
hi!
I want to change the tax base amount in MIRO transaction as per my client requirement. But in MIRO i am unable to change the base amount means even if i change the base amount , if i tick the calculated tax check box, it is taking original material cost amount.
Can any one tell how to solve this problem?
regs,
ramesh BHi
You can change the tax base amount at time of invoice verification - for this you need to set change base amount indicator in Financial account global settings -> tax on sales/purchases -> basic settings -> change field control for base amount -> enter you country's calculation procedure and check the change indicator.
After setting this at time of IV, you can enter tax base amount and tax under tax tab.
Thanks -
We recently updated our Extended WH Tax config to report from Vendor Payments rather than cleared invoices and to report on GRoss Amounts rather than Net. However, when I run the standard 1099 report (S_P00_07000134) all documents (invoices / payments) prior to the config change show a WH Tax Base amount (1099 reported amount) NET of sales tax while the post update amounts show correctly at Gross. I've run the ZRFWT0020 but still no luck. Would really appreciate any insight / suggestions?
ThanksHi
I have already done that in VKOA, accounting document showing tax code, tax amount, GL account except Base amount.
Best Regards
Swami
Maybe you are looking for
-
Looking for All on one with USB Flash Drive Print/Scan support
I am looking for an All in One Print/scan/copy. It should support print from USB Flash drive and scan to the same. Thanks
-
No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ]
-
Itunes won't open, no error, just won't show up at all
I have an older version of itunes stuck on my computer because i cannot open itunes to upgrade or download a newer version from online. There is no error message or anything. Nothing happens when you click on it. It's very frustrating. I'd appreciate
-
Hi, I set myself as team member in Project Server 2013, when i click on Project,Approvals and Timesheet i receive the below error: "Cannot communicate with the server. Verify your connection and try again" I have other account with Project Manager ri
-
ACS with Dynamic VLAN which protocol to use ??
Hello, Which Protocol do I need to use, for providing dynamic VLAN to my desktop machines? As in ACS 4.0 if I use local database of ACS then users successfully get the dynamic VLAN & as soon I use AD database while integration it with ACS ,the authen