Withholding tax for customer
Hi
Can some one pl guide me the steps to deduct withholding tax for customers when we do creation of creditmemos from rebate agreements?
I maintained withholding tax type and tax code under customer master but still system is not calculating with holding tax when we create credit memos why?
Reg
Shan1242
Dear Shan
I have also gone through some notes on withholding tax including help menu. What I said earlier holds good. I dont think in India, withholding tax is applicable to customers. May be it is applicable to customers in United Kingdom as indicated in the link. Please go thru.
[Classic Withholding Tax|http://help.sap.com/saphelp_46c/helpdata/en/e5/0780914acd11d182b90000e829fbfe/frameset.htm]
It is also better to consult with some FI experts and let me know whether I am correct.
Thanks
G. Lakshmipathi
Similar Messages
-
Withholding Tax for Customer Down Payment F-29
Dear all,
I have configured the withholding tax and it works fine for the AP: invoice, payment, advance payment.
However I encountered problem for AR side: customer down payment (F-29). During the payment there is a "withholding tax" button that once you click a pop-up window will appear to enable you enter the withholding tax data.
My problem is no withholding pop up window appear and no error message as well. Thus I am unable to enter the withholding tax data.
The customer has been assigned with withholding tax type and withholding tax code. I follow the follow documentation for the configuration steps and it works well on AP side.
http://www.sapficoconsultant.com/Bonus/Extended%20Withholding%20tax%20configuration.pdf
Can you please kindly advise if there is any missing step need to be performed for withholding tax configuration for customer? How to solve the above issue?
thank you very much in advance.
DahliaHi Umesh,
Thank you very much for your quick respond.
Yes, I forget to mentioned in my previous email, I have done the following in the customer master:
1. Assigned withholding tax type and withholding tax code.
2. Enter the validity date from and to.
3. Check the withholding tax checkbox in customer master.
However the F-29 still do not have a withholding tax window pop-up.
Any other things that I need to do?
Thanks a lot.
Dahlia -
Extended withholding tax for customer tds
I WANT CONFIGURATION STEPS FOR CUSTOMER TDS ( CREDIT MEMO)
Hi Srinivas,
No additional customization required for customers credit Memo TDS except this one. All configuration setting for Vendor withholding Tax procedure also applicable to Customers.
Go to ASSIGN WITHHOLDING TAX TYPES TO COMPANY CODES
then select subject to w/tx check box under customer data
Sunitha. -
Withholding tax calculation @ Customer payment
Hi
Experts, can any one help me on this issue??. I want to calculate and post withholding tax for a customer at the time of incoming payment(F-28). I have already activated extended withholding tax, defined tax type, tax code, & assigned in the customer master data. But system not calculating the tax nor its displaying tax code in the payment screen, & throwing a message when I double click on the relevant tax column ie " withholding tax information missing from line item" I f someone could throw a light on this, it would be a great help,
Thanks in advance
Hariharan.Kindly check
1. Define witholding tax type for invoice posting
IMG > Financial Account Global settings > Withholding tax > Extended Withholding Tax > Calculation > Withholding Tax type > <b>Define Withholding Tax Type for Invoice posting</b>
2. Define witholding tax type for payment posting
IMG > Financial Account Global settings > Withholding tax > Extended Withholding Tax > Calculation > Withholding Tax type > <b>Define Withholding Tax Type for Payment Posting</b>
and also check OBWW (Define account for w/h tax)
rgds. -
Hello Experts,
Can any one explain or send docs for Configuration of witholding tax configuration for Customers
[email protected]Configuration Guide
1 Overview
This configuration guide provides the information you need to set up the configuration for withholding tax under Financial Accounting. It covers configuration relating, classic withholding tax, extended withholding tax.
2 Configuration
2.1 Organization structure
2.1.1 Organization Setup Step
N.A
2.1.1.1 Use
N.A
2.1.1.2 Prerequisites
N.A
2.1.1.3 Procedure
1. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu <IMG Menu path>
2. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
- In above table enter the field name, description, and usage of every relevant field.
- In the table below, list down all the actual values set up in the client. Add or delete columns as necessary.
<Field -1> <Field -2> <Field -3> <Field -4>
Value 1-1 Value 2-1 Value 3-1 Value 4-1
2.2 Process Configuration for withholding Tax
The following are the configuration steps for Withholding tax.
2.2.1 Classic withholding Tax
Maintain Countries
Maintain Types of Recipient
Define Income Types
Maintain Tax Codes
Define Form Names for Extended Reporting
Define Output Groups
2.2.1.1 Maintain Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.1.1.1 Use
Used For printing the withholding tax forms.
2.2.1.1.2 Prerequisites
N.A
2.2.1.1.3 Procedure
3. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings Maintain Countries
4. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.1.2 Maintain Types of Recipient
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.1.2.1 Use
Used For printing the withholding tax forms.
2.2.1.2.2 Prerequisites
N.A
2.2.1.2.3 Procedure
5. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Maintain Types of Recipient
6. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Rec. Type Type of recipient"
Description Description of recipient type
2.2.1.3 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.1.3.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.3.2 Prerequisites
N.A
2.2.1.3.3 Procedure
7. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Define Income Types
8. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.1.4 Maintain Tax Codes
The income type is a classification of your (foreign) vendors according to income.
2.2.1.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.4.2 Prerequisites
N.A
2.2.1.4.3 Procedure
9. Access the activity using the following navigation options:
Transaction Code OBC7
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Calculation Maintain Tax Codes
10. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
W.tax code The tax codes are unique per country
Description Text of the tax code
Off.w. tax .code Key which is used for withholding tax reporting on official forms.
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code
Net base for tax contributions Indicator that the taxes on sales/purchases are not used in the base amount for withholding tax.
Currency Currency of the minimum amount defined for the withholding tax report
Minimum Amount Field used define minimum tax it is used for Japan only N.A
Withholding tax rate Percentage rate used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Reduced Rate Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Withh. tax formula withholding tax is to be calculated according to a special procedure
Germ. reunification tax German Reunification Tax for the Withholding Tax N.A
Posting with payment The payment amount is reduced by the withholding tax amount posted
Region The region forms part of the address
Provincal tax code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain). N.A
Income type Type of income subject to withholding tax
2.2.1.5 Define Accounts for Withholding Tax
You define the account numbers of your withholding tax accounts. The system posts the tax amount to these accounts when clearing open items.
2.2.1.5.1 Use
Used for document posting in FI.
2.2.1.5.2 Prerequisites
N.A
2.2.1.5.3 Procedure
11. Access the activity using the following navigation options:
Transaction Code OBYS
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Postings Define Accounts for Withholding Tax
12. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction QST The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Tax code used to differentiate account determination
Account GL account no.
2.2.1.6 Define Form Names for Extended Reporting
You define the names of the forms for the withholding tax return to your vendors.
2.2.1.6.1 Use
You can use the form ID to define country-specific forms.
2.2.1.6.2 Prerequisites
Form should be there
Company code
2.2.1.6.3 Procedure
13. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Reporting Define Form Names for Extended Reporting
14. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Program name The name of the program you want to edit
Company code The company code is an organizational unit within financial accounting.
Form ID The identification for a form or a form set enables you to access a particular form or set of forms from a selected group of forms
Form Form which is to be displayed
2.2.1.7 Define Output Groups
You define the combination of outputs which is required for a given data source
You would define two output groups in Customizing:
One to define the data selection (accounts payable, etc.) and the form and file to be used.
One to define a data selection (accounts receivable, etc.) and the list to be used.
2.2.1.7.1 Use
You can for different reporting purpose..
2.2.1.7.2 Prerequisites
Form
DME Engine
2.2.1.7.3 Procedure
15. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Generic Withholding Tax Reporting Define Output Groups
16. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Process Type type of process that will be triggered by the program
Output Group Indicates the output group as used in withholding tax reporting. An output group is the combination of outputs which is required for a given data .
Customizing view withholding tax scheme in your country
Reported doc. You can choose in which context the withholding tax data is to be displayed
Open items selecting this option will allow you to see also the open items
Group item according to fiscal year items belonging to vendor/customer B are listed together with items of vendor/customer A if A is specified as fiscal address of B.
No exemptn data Excludes data relating to withholding tax exemption
No tax data Excludes data relating to taxes on sales/purchases
Title of output list focused on The output list is divided into four sections, covering Various information
Form printing Description for printing form
DME File Using this parameter, you can control whether the data medium exchange should be carried out to a temporary sequential file
Format tree Used together with the DMEE tree type to uniquely identify a format tree
Tax Ref.1 There is a parameter type for every additional parameter for a company code
Tax Ref.2 There is a parameter type for every additional parameter for a company code
User Program Your report should contain a form
2.2.2 Extended withholding Tax
Withholding tax Country
Extended withholding tax Malaysia, Singapore, Brunei, Nepal ,Thailand
Check Withholding Tax Countries
Define Withholding Tax Codes
Check Recipient Types
Define Income Types
Define Withholding Tax Type for Invoice Posting
Define Withholding Tax Type for Payment Posting
Define Rounding Rule for Withholding Tax Type
Define Withholding Tax Codes
Define Formulas for Calculating Withholding Tax
Portray Dependencies Between Withholding Tax Types
Define Min/Max Amounts for Withholding Tax Codes
Assign Withholding Tax Types to Company Codes
Activate Extended Withholding Tax
Define Accounts for Withholding Tax to be Paid Over
Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
Define Accounts for Self-Withholding Tax
Define Accounts for Withholding Tax Offsetting Entry
Define Numbering Classes
Define Numbering Groups
Define Number Ranges
Assign Numbering Group to Numbering Class
Assign Numbering Group to Numbering Class
Numbering Concept Option 1: Assign Numbering Class
Numbering Concept 4: Assign Numbering Group
Assign Forms for Withholding Tax Certificates
Define Minimum Amounts per Withholding Tax Code
Define Output Groups
2.2.2.1 Check Withholding Tax Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.2.1.1 Use
Used For printing the withholding tax forms.
2.2.2.1.2 Prerequisites
N.A
2.2.2.1.3 Procedure
17. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Withholding Tax Countries
18. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.2.2 Define Withholding Tax Codes
If your national tax authorities use withholding tax keys to identify the different withholding tax types, you can define these official names for your tax codes here.
2.2.2.2.1 Use
System can therefore assign the withholding tax items to the correct withholding tax return.
2.2.2.2.2 Prerequisites
N.A
2.2.2.2.3 Procedure
19. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Define Withholding Tax Codes
20. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Official Key Official withholding tax codes are defined which must be included in official reports.
Name Description of official key
National tax code With this value you can classify every official tax key. This information is required on certain legal reports
Country Off. w/tax key Nat. Tax Code Text (40 characters)
NP COMN Commission
NP CONT Contractors
NP DIVD Dividends
NP INTR Interest
NP MANT Maintenance
NP PROF Professional
NP RENT Rent
2.2.2.3 Check Recipient Types
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.2.3.1 Use
To print from for vendors.
2.2.2.3.2 Prerequisites
N.A
2.2.2.3.3 Procedure
21. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Recipient Types
22. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
With holding tax type This indicator is used to classify the different types of withholding tax
Rec. Type The type of recipient can be defined in the vendor master record
Text Description of Rec. type
Country Withhld tax type Recipient type Text
NP I1 NR Non - residents
NP I1 PN Person Not Registered
NP I1 PR Person Registered
NP P1 NR Non - residents
NP P1 PN Person Not Registered
NP P1 PR Person Registered
TH I1 3 Phaw.Ngaw.Daw. 03
TH I1 53 Phaw.Ngaw.Daw. 53
TH I1 54 Phaw.Ngaw.Daw. 54
TH I2 3 Phaw.Ngaw.Daw. 03
TH I2 53 Phaw.Ngaw.Daw. 53
TH I2 54 Phaw.Ngaw.Daw. 54
TH P1 3 Phaw.Ngaw.Daw. 03
TH P1 53 Phaw.Ngaw.Daw. 53
TH P1 54 Phaw.Ngaw.Daw. 54
TH P2 3 Phaw.Ngaw.Daw. 03
TH P2 53 Phaw.Ngaw.Daw. 53
TH P2 54 Phaw.Ngaw.Daw. 54
TH W1 2 Phaw.Ngaw.Daw. 02
TH W1 3 Phaw.Ngaw.Daw. 03
TH W1 53 Phaw.Ngaw.Daw. 53
TH W1 54 Phaw.Ngaw.Daw. 54
TH WP 2 Phaw.Ngaw.Daw. 02
TH WP 3 Phaw.Ngaw.Daw. 03
TH WP 53 Phaw.Ngaw.Daw. 53
TH WP 54 Phaw.Ngaw.Daw. 54
2.2.2.4 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.2.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.2.4.2 Prerequisites
N.A
2.2.2.4.3 Procedure
23. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Define Income Types
24. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.2.5 Define Withholding Tax Type for Invoice Posting
You define the withholding tax type for the posting at the time of entering an invoice. This withholding tax type does not have any effect on the payment.
2.2.2.5.1 Use
The withholding tax type used for the posting at the time of entering an invoice.
2.2.2.5.2 Prerequisites
N.A
2.2.2.5.3 Procedure
25. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Invoice Posting
26. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
Base amount Reductn the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with mnth
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
No cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
2.2.2.6 Define Withholding Tax Type for Payment Posting
You define the withholding tax type for posting at the time of paying. You also have to enter the withholding tax information when entering the document for this withholding tax type. (Only for Thailand)
2.2.2.6.1 Use
The withholding tax type used at the time of posting.
2.2.2.6.2 Prerequisites
N.A
2.2.2.6.3 Procedure
27. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Payment Posting
28. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif .net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Cash discount W/tax pre c/dis,
c/dis pre w/tax
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with month,
Combined Accum
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
Self W/holding When you come to make a payment, you can then decide, on a case by case basis, whether self-withholding should apply
W/Tax alrdy w/hd the amount can be entered when you post the invoice
W/tax for Pmnt the withholding tax amount can be entered manually for incoming and outgoing payments
No.Cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
Central invoice No centr.invoice,
Cent.inv & 1st p.pmt,
Central inv.prop. indicator, "Central invoicing" is not applied to this withholding tax type. N.A keep it as no.
Minimum check Minimum check at item level,
Check min base amnt at pmnt doc level,
Min .base amnt check at doc invoice level,
Amount min.check at payment doc level,
Tax exempt amount check at Document level You can select any indicator system calculate the tax and post after checking the specified base amount
2.2.2.7 Define Rounding Rule for Withholding Tax Type
You define rounding rules for the individual withholding tax types.
2.2.2.7.1 Use
Rounding rules only apply to the posting of withholding tax amounts in the appropriate company code
2.2.2.7.2 Prerequisites
N.A
2.2.2.7.3 Procedure
29. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Rounding Rule for Withholding Tax Type
30. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code NP01 The company code is an organizational unit within financial accounting.
W/th .type I1,P1 This indicator is used to classify the different types of withholding tax.
Currency NPR Currency key for amounts in the system.
Unit 100 Unit to be round off
2.2.2.8 Define Withholding Tax Codes
You define the withholding tax codes rounding for calculating withholding tax.
2.2.2.8.1 Use
Used for calculating the withholding tax.
2.2.2.8.2 Prerequisites
N.A
2.2.2.8.3 Procedure
31. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Withholding Tax Codes
32. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Off.W/Tax Key official withholding tax codes are defined which must be included in official reports
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
Post.Indic If you set this indicator tax amount is deducted accordingly
1 - Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
3- Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
With/tax rate This is the percentage rate applied to the withholding tax base amount to arrive at the withholding tax amount
With /tax rate ( fraction) Withholding tax rate counter, if the rate can be entered as a fraction
W.tax From Indicator that withholding tax is to be calculated according to a special procedure
Region The region forms part of the address
Prov.tax.code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain).
Income type Type of income subject to withholding tax
2.2.2.9 Define Formulas for Calculating Withholding Tax
You define formulas (scales) for calculating withholding tax. In order to use a formula for calculating withholding tax, you must enter the national currency in the Currency key field of the relevant company code.
2.2.2.9.1 Use
Used for defining the specification like from which date ,up to what amount the tax rate is applicable
2.2.2.9.2 Prerequisites
N.A
2.2.2.9.3 Procedure
33. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Formulas for Calculating Withholding Tax
34. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
currency Currency key for amounts in the system.
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Wcty an additional country is needed for calculating or reporting withholding tax
Valid from The date valid from
To base amnt Maximum withholding tax base amount up to which the withholding tax rate specified is to be used
Whld Tax Percentage rate, which is used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Red RT Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Reduce.base amt. Amount by which the base amount is to be reduced in order to determine the withholding tax amount by means of the withholding tax rate
Dec.red.bse.amt Amount by which the base amount is to be reduced with withholding tax exemption in order to determine the withholding tax amount by means of the decreased withholding tax rate
2.2.2.10 Portray Dependencies between Withholding Tax Types
You can represent dependencies between withholding tax categories.
2.2.2.10.1 Use
You can use in a sequence of withholding tax in a sequence.
2.2.2.10.2 Prerequisites
N.A
2.2.2.10.3 Procedure
35. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Base Amount Portray Dependencies Between Withholding Tax Types
36. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax type no. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Depend on type no. Sequence number of the withholding tax type whose withholding tax amount has some influence in the calculation of the withholding tax base amount
Table values
Cty Wth.t.type W/tax no. Depen.type Name
NP I1 1 Invoice posting - EWT
NP P1 2 Payment posting - EWT
2.2.2.11 Define Min/Max Amounts for Withholding Tax Codes
you define minimum and maximum amounts for withholding tax codes. In the withholding tax base exemption amount field you can specify an amount which is deducted when calculating the with holding tax base. The amount of the tax exemption does not have any effect when matching the withholding tax base with the minimum, because the base and the minimum are matched before the tax-exempt amount is deducted.
2.2.2.11.1 Use
Used for exemption amount field you can specify an amount which is deducted when calculating the with holding tax base.
2.2.2.11.2 Prerequisites
N.A
2.2.2.11.3 Procedure
37. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Minimum and Maximum Amounts Define Min/Max Amounts for Withholding Tax Codes
38. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax Code One or more "withholding tax codes" are assigned to each withholding tax type.
Currency Currency key for amounts in the system.
Valid from The date valid from
Minimum W/tax amount Minimum withholding tax amount. The withholding tax amount calculated if only posted if it exceeds this minimum amount.
Maximum W/tax amount Maximum withholding tax amount. If the withholding tax amount calculated exceeds this maximum, the system posts the maximum amount (and not the actual tax amount
Minimum base amount Minimum withholding tax base amount.
W/Tax bse exem.amount The withholding tax base exemption amount is deducted from the base amount before the withholding tax amount is calculated
2.2.2.12 Assign Withholding Tax Types to Company Codes
You assign withholding tax categories to company codes.
2.2.2.12.1 Use
To work with withholding tax .
2.2.2.12.2 Prerequisites
Company code
Tax code
2.2.2.12.3 Procedure
39. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Assign Withholding Tax Types to Company Codes
40. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Withhld tax type This indicator is used to classify the different types of withholding tax.
Recipient type The type of recipient can be defined in the vendor master record
With/tax agent you tell the system that for this withholding tax type, the company code is entitled to withhold tax on behalf of a vendor
W/Tax obligated from Date from which.The company code is obligated to withhold tax for the given withholding tax type
Oblig. to W/Tax Until Date to which. The company code is obligated to withhold tax for the withholding tax type.
W/tax Number This is a number issued by the tax authorities per withholding tax type.
Subject to W/tax you tell the system that the company code for this withholding tax type is subject to withholding tax.
Self Withhldg agent the company code can withhold tax on its own behalf for this withholding tax type
Wxeption number Numbered assigned by the relevant authorities for exemption from withholding tax.
Exemption reas. used to classify different types of exemption from liability to a particular withholding tax.
Exemption rate Rate of exemption from withholding tax.
Exempt from Date from which withholding tax exemption applies.
Exempt to Date up to which withholding tax exemption applies.
2.2.2.13 Activate Extended Withholding Tax
You can activate extended withholding tax.
2.2.2.13.1 Use
To work with extended withholding tax.
2.2.2.13.2 Prerequisites
Company code
2.2.2.13.3 Procedure
41. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Activate Extended Withholding Tax
42. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Extended w/tax You select this indicator; you activate extended withholding tax processing.
2.2.2.14 Accounts for Withholding Tax to be Paid Over
You define the accounts for the withholding tax to be paid over.
2.2.2.14.1 Use
Used for posting extended withholding tax.
2.2.2.14.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.14.3 Procedure
43. Access the activity using the following navigation options:
Transaction Code OBWW
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Withholding Tax to be Paid Over
44. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction WIT The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.15 Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
You can define the accounts for the withholding tax offsetting entry for the "grossing up" procedure .
2.2.2.15.1 Use
Used for posting extended withholding tax.
2.2.2.15.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.15.3 Procedure
45. Access the activity using the following navigation options:
Transaction Code OBWU
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
46. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction GRU The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.16 Define Accounts for Self-Withholding Tax
You can define the accounts to which withholding tax is posted.
2.2.2.16.1 Use
Used for posting extended withholding tax.
2.2.2.16.2 Prerequisites
GL Account must exist in company code
2.2.2.16.3 Procedure
47. Access the activity using the following navigation options:
Transaction Code OBWS
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Self-Withholding Tax
48. On the Overview screen, make the following entries: -
WTRE DMEE Tree Format File For France (Withholding Tax for France)
Hello,
I have to implement withholding tax for France on SAP 4.6C environment
I would like to generate and to send a file to administration
I m using generic withholding tax program RFIDYYWT but in DMEE tree transaction i see only one format of file : IDWTFILE_UK_CIS36E for withholding tax
I know that theres a format of file for France : IDWTFILE_FR_DAS2
But is it possible to use it with SAP4.6c version ?
And how can I install this file format for France (steps in customizing , ossnote to apply ?????)
Thanks a lot for any answer
MyDear Merlino,
I have some steps about withholding tax is it suitable or not find out but some scenarios is suitable kindlay check out
Hi
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate -
are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type.
When entering a line item, you can enter withholding tax data for each of these withholding tax types.
How To Configure Withholding Tax?
Steps for extended withholding tax :
1. Check withholding tax countries
2. Define Ex. Withholding tax types for invoice postings
3. Define Ex. Withholding tax codes
4. Formula for Ex. Withholding tax calculation
5. Assign Ex. Withholding tax types to Company code
6. Activate Ex. Withholding tax
8. Create a G/L a/C for Ex. Withholding tax
9. Define A/C for Ex. Withholding tax (DBWW)
10. Make changes in Vendor master (XK02)
11. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
12. Activate country version for specific fiscal year position
Path: IMG -> FA -> -> **** -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/content.htm
Hope this helps you
Prem -
How to configure extended withholding taxes for Bangladesh?
Dear Experts,
We are trying to configure extended withholding taxes for Bangladesh as per our client's requirement. However, there is no separate configuration steps in IMG Customizing for Bangladesh.
Also, we seek to print a withholding tax certificate for Bangladesh.
Hope to receive some expert advice in this regard.
Best Regards,
Akshay NerurkarHi
I did for Phillipines which in first week of May 2014 and it did copies the setting of EWT it just I had to activate the functional . Yeah I did some more configure and apply some OSS note as well to work it properly ,
Please read 63805 - FAQ: Country-specific Customizing settings
602901 - Support of country specific functions
which states all country fo which SAP delivers the Settings
many Thanks -
Generic Withholding tax for Credit note
I try to generic Withholding tax for credit note but It's show message
No data was found.
I check the selection criteria so many time and I use variant from another document that it can generic wht before.I just change posting date and document No. for Credit note and it's still show no data was found.
What's wrong and what should I do.
please advice me.
Thank you very much.
AtaruHi Wayne,
We opened a note with SAP and were told that a US 1042s copy could not be used within the standard system. Looking into it further we found that the form name was coded into a selection program. We had an ABAP developer add code that allows us to use a "Z_" copy form.
Regards,
Gregg -
Withholding tax for Kentucky locals
Hi,
Requirement: Need to calculate withholding tax for Kentucky locals.
I have done the config accordingly, /301 and /601 displays the amount but /401 and /701 are not appearing/calculating for Kentucky locals. Could the reason be because of a support pack.
FYI, we are using version 6.0.
Thanks
Karthick.Hi Karthick,
The first thing I would check for whichever Kentucky Local if the tax code is mapped in BSI tax factory application.
I would also check what taxes are applicable for Kentucky locals. Once I check the applicable taxes then I would review my configuration.
Infact about few weeks ago, I did configure the warren county for Kentucky state and it works as desired.
Please let me know what tax authority (Kentucky Locals) you are trying to configure and I can at my end what taxes are applicable
thanks
Baburaj S Avanathan -
Withholding Tax for Document Generation Wizard
Hi,
I have defined Withholding tax for my customers.When I try to create the A/R Invoices through Doc.Generation Wizard,the system is giving the error message-'Withholding tax is missing.'But I am unable to assign any W/Holding tax in the delivery.Can somebody give suggestions?
Thank u.
Regards,
SekarHi Sekar,
I Reproduced the same scenario till delivery and used Doc. Gen wiz as target document as A/R Invoice it worked fine.
Settings BP and Item both we set to Witholiding tax Liable. The Invoice had withholdig tax amout added generated by the DGW.
Could you check in for the list of BP in DGW (Document generation wizard)
Business Partner --> Accounting tab --> Tax sub-tab --> WT taxes allowed and check if you have one WT checked.
Let meknow if this works.
Regards,
Rakesh -
Additional Extended Withholding Tax for Chile.
Dear Gurus,
I've received a request for an additional WIthholding tax used in chile for Foreigner which are not living at chile.
The description I've received was as follows.
If a Downpayment is applied the Withholding Tax should be set at the Downpayment.
after that when the Invoice is loaded, the remaining WIthholding tax should be calculated.
I've created two Tax types one for invoice and one for payments. with their corresponding Tax Codes.
Take this as an example: Final Invoice 10000 WTh 20%
F-48 Downpayment of 5000 , estimates WTh of 1000 this leaves
5000 Vendor,
1000 to WTh and
4000 to outgoing payment
After that I enter the invoice reducing the WTh ammount to the remaining part (5000)
that leaves the following accounting doc
Expenses 10000
to Vendor 9000
Wth 1000
then I make a compensation at f-54 for the 5000 Downpayment. but when generating the final payment of the invoice the F110 is calculating as follows.
wht 1000
Vendor 9000
to vendor 5000
Wth 2000
Payment 3000
Doing this it's estimating the nother 1000 of the remaining part of the paymen side of the Wth.
Could anyone let me know if there's a way to make it avoid making this estimation since the whole withholding tax has finished when the invoice arrived.
Thanks in advance for any information you could provide.
RegardsHi Srinivas,
No additional customization required for customers credit Memo TDS except this one. All configuration setting for Vendor withholding Tax procedure also applicable to Customers.
Go to ASSIGN WITHHOLDING TAX TYPES TO COMPANY CODES
then select subject to w/tx check box under customer data
Sunitha. -
Withholding tax for bank interests
Hi, Experts,
I'm facing the problem that the bank doesn't pay the total interests, they will deduct the withholding tax amount.
I've review the documents for SAP extended withholding tax function, found that it is only available for vendors and customers...
Does anyone know how to realize it in the SAP?
Or just have to manually record it through manual entry?
This happens for banks in Spain.
Many thanks.
Best regards,
KelvinHi,
You have to create a customer a/c with bank name and maintain TDS codes in the master data. Pass below entry
Customer- A/c Dr
TDS Receivable A/c Dr
Int.recd A/c
After that, the will credit the int.in our books.
Bank A/c Dr
Customer A/c Cr
Regards,
Mukthar -
Hey Gurus,
It requirement for my client,we are running the F.26 Interest scale for customers find below the example in brief.........
Client will receive security deposits from customers we treated this as a special GL for this we will pay the 7 % interest to the customer.
If the interest amount is more than RS.5000 paying by the client we need to deduct WITHHOLDING TAX all the configuration has been done we are able to see the Base amount in customer line item but system is not calculating the WITHHOLDING TAX.
Could you let me know the probabilities where i might got missed one more doubt is W/H Tax will calculate with help of Business Place,F.26 is a background process so we are not able to update Business place.Is there is any configuration where i could update business place by default or any other ways.
Appreciated for early response...........
Thanks a lot in tonnnssDear,
I recommend you check the tax categoty on the master data, check if there is an exemption data period, or if there is a monthly limit of accumulation in Customizing.
regards -
Calculate Withholding taxes for VEndor Invoices using ABAP program.
Hi All,
I have to upload Vendor Invoices using FB60/Fb01 tcodes. I am able to post the Invoices using FB01/Fb60
but I have to calculate extended withholding taxes also using this program for the Invoices.
Is it possible to upload vendor Invoices and calculate withholding taxes using Program?
If yes,
Does anyone has any idea how do you calculate extended withholding taxes using any BAPI's?
I have used these two BAPI's
BAPI_ACC_DOCUMENT_POST
BAPI_acc_invoice_receipt_post
they are working fine but without withholding tax.
This is a requirement for country India.
Regards,
SushilHi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
extract the vendor types in to itab Table1New.
Select the vendor & types from Table2 by using the for all entries option (better performance).
loop at Table1New
check in Table2:
if the unique key is vendor no: check all fields for the vendor type from Table1New
if the unique key combo is vendor no & type: check by using a read table.
If not found => add entry to Table2
endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou -
Withholding tax for open items posted from FI-TV-COS
When the open item is generated from FI-TV-COS it is missing the withholding tax detail opposed to the manual creation of invoice for the same vendor in FI.
What is the workaround to have withholding tax detail for such open items coming from FI-TV-COS?Withholding tax is not supported by SAP here...
Maybe you are looking for
-
UPS and our iMac // Will not allow iMac to sleep.
Hello, We have a Cyberpower UPS (CP685AVR) for our 20" iMac 2.66Ghz (last gen)and it works great. It has a USB interface to communicate with the iMac's power manager, and tells me how much juice is left, how the cells are doing, etc. The only problem
-
I am unable to connect toitunes i have followed the troubleshooting for unistalling and installing iTunes and i still get this error message and it will not open the following is the error message: The procedure entry point AVCFPlayerAppliesMediaSel
-
Streamlining win XP pro for music question
Hello guys and gals I will soon be buying the EMU 1212M card and I have a spare 160Gb drive which I will partition so my question is as per topic but I would need some links to places that shows you how to streamline or disable the crap in windows th
-
Hi, Can we create an org unit under a position (other than chief position) Eg: GM will be the top of the Company, under GM different departments, is it possible in OM..? I would appreciate your help. Thanks! SD.
-
Hello, My N95 for a few days has required of me with each time I start it the date and the hour. If not, all functions well. According to you, is this a breakdown (panne) ? (sorry for my english) Thank you