Within last week I am unable to log on to Bank of America online banking. I have followed all suggested prior recommendations to the best of my ability but problem persists. BofA first told me it was a compatibility problem they were having with Mozilla
I cannot log onto Bank of America website from Firefox. This problem started recently. At first BofA said they have a compatibility problem with new version of Firefox. Then they say no, it's a Firefox problem. I've tried the solutions listed in prior threads but none work. I have no problem logging onto BofA via IE.
== URL of affected sites ==
http://www.bankofamerica.com
I got this problem when I upgraded to ver 3.6.12 from 3.6.11. I called BofA and after half an hour on phone, they told me to try using another browser. I used Intenet Explorer & they couldn't find the BofA site either. BofA had been told the problem was with any Firefoz version of 3 or higher. After I got off the phone with BofA, I downloaded an older version that I had been using without any problems & installed that.(3.5.15) That didn't work either.
If the problem is with Firefox, why can't Internet Explored find the site either?
Similar Messages
-
i have done all 7 steps recommended by the troubleshooting articles and only when i restart my router does my library show on apple tv2 but only for about 5 minutes, this was never a problem before the updates of itunes and apple tv2, i have spent insane amounts of money on the apple store buying movies and tv shows that i cannot watch anymore, and no there is no firewall on my laptop nor my router, so no port configuration is needed
i have read many articles for this problem but there is no solution, some say restart the router, others say uncheck the option to sync iphone over wi-fi, others suggest not hitting the "done" button after setting up homeshare on itunes, NONE of them work. My itunes library disappears from ym apple tv 2 after 5 minutes or soDid not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
Same question as posted in the title. Thanks in advance!
After uninstalling MacKeeper, if you still have the problem, proceed as below.
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have reset winsock, I have disabled firwewall, virus program, - tried everything. Still no luck. Looks like many people are havoing the same problem. What IS the problem and how can it be fixed?
Antonio,
Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
Thank you very much -
My Toshiba laptop went through 45 updates, and now when I open Firefox (where ALL my bookmarks live) the program freezes after a few minutes. I get error messages about my profile, and errors about Firefox already running. I tried the suggestions above, but they don't seems to line up with my system. Windows8 is my OS. This query is on another laptop.
hello rgneb, can you see if those problems continue after you update to firefox 37 beta 6?: https://www.mozilla.org/firefox/beta
-
I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites -
Hi,
I am need of help! I have had this issue for a while now and it's becoming frustrating.
My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
Someone please help me fix this problem.
Many thanks.
Matt.Hi
So just close iTunes and re-open iTunes thats it and that worked for you?
When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
Thanks. -
iblacklist problem still , I download it again ,this was not helpfull .problem is that icon of iblacklist in i tune is disc phone like One, named iblacklist, but on screen appear as "secret contact" not as iblacklist icon wich is contact like icon .please help .
<Edited By Host>Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your first screenshot as it includes your account id.
Looking at the reviews for the app it appears to be a waste of money, and the support link on the apps' description page doesn't appear to work. You could contact iTunes Suppot via the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!
At last i did some experiments and it solved my problem... heres the solution :
1. Install the reliance drivers and software from their website.
2. As the reliance software is not supported my mavericks it wont open, but dont worry.
3. Now after installation go to system preferences->network->and select "ZTE Wireless Terminal".
4. Configuration: Default
Telephone number: #777
Account name and password should be the owners number.
5.Finish ! press apply and click Connect...
Enjoy browsing !!! -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on? What can I do?
There is a new update available today for version 37, please do post back if this also happens for this update.
Please update to the most recent version of Firefox:
*[[Update Firefox to the latest version]] -
Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo. Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back. Any ideas what to do?
At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
Regards. -
I have previously submitted a book for printing three different times and Apple has told me each time it's unreadable. I have previously previewed it each time before sending and it was perfect. I have followed all other directions - updated software, all other applications off etc. What am I doing wrong?
Boot into Safemode and Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If it is good order while in safe mode
LN -
I already have a CC account through my educational institution but it did not include the Lightroom mobile. So now, apparantly, in order to get Lightroom mobile I have to purchase the PS/LR photographers package but when I went to do it I was told that I already have a CC account. What am I to do?
I think all you have to do is go to the App Store and download Lightroom mobile onto your mobile device. You don't need another package in order to get it.
-
I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.
10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.
Maybe you are looking for
-
I am a new Mac user. I am trying to simply cut certain things out of certain pictures, and then paste them into other pictures or black pages. Is this possible? What app would be best? Can I do this in Iphoto?
-
Hi, We would like to see the hash value calculated by the ACE when the HTTP probe hash command configured. This is possible on CSS via the "sh service" command. We have tried to get it from sh rserver , sh probe XXX detail sh serverfarm XXX det but w
-
Unable to generate plx even thoutgh library compiles fine
hi I have a library which compiles fine in the forms designer. I generate the plx and it generates fine. Now i just added an additional program unit i.e a package spec and package body . These compile fine in teh designer when i do a file->compile al
-
How to troubleshoot CS6 uninstall problems?
After migrating to a new MacBook Pro (unfortunately without first deactivating source computer Adobe suite), I am now seeking to uninstall Adobe software on new MacBook Pro. Uninstallation repeatedly fails. I used CC cleaner tool, but no CS6 products
-
Wonky Printer Behavior with InD CS3
My Xante G4 started behaving weirdly today. Started putting my InD pages all over the place, i.e., when I print an 8.5x11 page, it blows up the page copy way beyond the page boundaries; on 11x17, it plops the page all over the place, even when I tell