Withlding tax invoice is not creating

HELLO
withholding tax invoice is not generating at the time of payment but it is calculating only.
Steps
Create standard invoice Rs 100
Attach payment withlding tax on line 6%
Validate and approve
Crate payment with Rs 94(deduct Rs 6%)
Check withlding tax line on standard invoice line and it is available there with negative Rs6
But system doesnt create withholding tax invoice for Rs 6?
Setup is withlding tax at the time of payment and create withlding tax at payment

Hi,
I checked the difference b/w normal standard invocie and generating invoice from recurring and found the difference only in header PAYMENT WITHHOLDING TAX GROUP.
When i not to choose payment wihthloding tax group in invoice header and select only in line,and validate and payment,it deduct withholding tax OK but not create withholding tax invoice?
But when i select payment withholding tax group on INVOICE header level,than it create withholding tax invoice as well as deduct on payment amount.
Is it mandatory to select withholding tax group on header level?

Similar Messages

  • Payable Invoice has not created for internal requisition. ( R12.1.3)

    HI,
    This is an issue where i am facing for which the invoice has not created for the internal requisition, whereas the Receivables Transaction has created automatically for the same internal SO.
    Is there any way to find out the invoice, because i have again ran the Report "Create Inetrcompany AP invoice" and when i mchecked in the log it says 0 fetched invoice....
    Kindly help me out to solve this issue,
    Thanks in advance.
    Vijay

    Hi Vijay,
    Did you check in AP_INVOICES_INTERFACE table if there are some records with INVOICE_NUM like '%AR invoice number%'?
    If no records in the interface table - can you please, check by submitting the program without giving any input parameters?
    Regards,
    G V Ranjith

  • Invoice documents not created in the mass activity

    Hello SDN,s
    The invoices(Print documents) have not been created through mass job in the EA29 transaction code.
    When we run the job for mass invoice in EA29, the invoices have not been created and able to create the invoices in the EASIBI transaction code.
    I have created billing documents and trying to create the invoices in EA29 transaction code and getting the error like no documents created in the application.
    Could you please guide me why the invoices are not getting created in the EA29 and where do i check to resolve the issue.
    Please advice.
    Regards,
    KV

    Hi KV:
    The mass activity IS-U for invoice creation is tx. EA26, tx. EA29 is the paralell mass printout IS-U, but first you must create the invoice document with EA26 and then print it with EA29.
    Here's a list of some IS-U Billing transactions
    EASIBI Create Individual Bill
    EA00 Test Billing of a Contract
    EA13 Print/Billing Document Reversal
    EA14 Print/Billing Document Reversal
    EA15 Reversal of Invoicing Documents
    EA16 Create Manual Backbilling
    EA17 Change Manual Backbilling
    EA18 Display Manual Backbilling
    EA19 Create Bill (Individual Creation)
    EA20 Reverse Billing Document
    EA21 Adjustment Reversal Billing Docs
    EA22 Display Billing Document
    EA22_TOOL Billing Tool
    EA24 Delete Adj. Reversal frm Bill.Order
    EA25 Create Partial Bill (Individual)
    EA26 Mass Processing: Create Bill
    EA27 Mass Processing: Create Partial Bill
    EA28 Mass Process.: Request BB Amounts
    EA29 Mass Processing: Bill Printout
    EA29_AGGRBILL Print Aggregated Bill
    EA33 Mass Processing: Bill Reversal
    EA34 Mass Processing: Full Reversal
    EA38 Mass Activity: Billing
    EA39 Mass Activity: Billing Simulation
    EA40 Display Print Document
    EA55 Display Rate Cat.
    EA56 Maint. Rate Type
    EA57 Create Budget Billing Change Doc.
    EA58 Mass Activity: Coll. Bill Printout
    EA59 Print Collective Bill (Old)
    EA60 Print Invoicing Document
    EABI Billing/Invoicing log display
    EABICO Bill Correction
    EABIH Archive Billing Document Headers
    EABIL Archive Billing Document Line Items
    EABR IS-U Billing
    EAIN Billing/Invoicing log display
    EAMABI Mass Billing
    EAMASI Mass Billing Simulation
    EAMS00 Mass Billing of Simulation Indexes
    EAMS01 Mass Act.: Billing of Sim. Indexes
    EATR Mass Activity: Create Bill/Part.Bill
    EAXX IS-U Billing
    EA_DOWNLOAD Download Billing Master Data
    I hope this will be helpful.
    Regards,
    David

  • Inter Company Invoice is not created

    Dear Friends,
    When i am creating the Inter Company invoice through  it is showing the log as
    80011326 00000 Sales Org is not defined
    Commercial invoice is created for the same delivery. when we see the document flow still delivery status is being Processing.
    IN VF04 i entered Sold to party name  and put the tick mark for Intercompany billing.
    here it invoice due list showing the delivery number with out sales organization.
    Please let me know what configuration i missed. do the needfull ASAP.
    Thanks
    Raju.

    Dear Janardhan,
    Please check these configuration settings in the IMG
    SPRO>IMG>Sales and Distribution>Billing>Intercompany billing
    -->Assign Organizational Units By Plant
    -->Define Internal Customer Number By Sales Organization
    I hope it will help you,
    Regards,
    Murali.

  • Invoice is Not creating

    Hi experts,
      When iam creating invoice it is giving an error
    Sales Order Number XXXXXX 000010  Item category ZDOM ZAN cannot be invoiced with billing type ZFRA
    I maintained Billin relevance in ZAN as B and in Header i maintained Invoice type ZFRA
    Please help regarding this
    Thanks
    seshu

    Hello
    Do the following:
    1. Use TCode VTFA, check copy control from the sales doc type (ZDOM) to the Billing doc type (ZFRA),
    2. Click on the Item button for that new combination
    Make sure your Item Cat is there (ZFRA)
    If not, copy TAN and rename ZTAN
    Make the changes that you want for the items to be copied from the sales doc to the billing doc
    3. Try the transaction again
    Thanks & Regards
    JP

  • Invoice Does not Created in R/3

    Dear All,
    I am sending data from Oracle Application to SAP R/3 through XI .
    XI is picking up data from Oracle and send it to RFC of SAP R/3 in RFC it calls function module(Z) in which i am calling BDC.It executes fine in R/3
    But when i send it thriough XI it gives
    After finishing the polling it gives all successfully finished.
    Message successfully received by messaging system. Profile: XI URL: http://aipid:50000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
    Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
    Success Message successfully put into the queue.
    Success The message was successfully retrieved from the request queue.
    Success The message status set to DLNG.
    Success Delivering to channel: CC_COPA_AED_RFC
    Success RFC adapter received a synchronous message. Attempting to send sRFC for ZXI_INTF_INVOICE
    Success BAPI response was a table of type BAPIRET2 with 0 rows
    Success BAPI executed successfully
    Success Commit transaction with BAPI_TRANSACTION_COMMIT
    BUT WHEN I CHECK THE INVOICE IN sap r/3 THENIT DOES NOT SHOW
    WHAT COULD BE PROBLEM
    THANKS,
    rp

    Hey,
    The Problem most probably is with COMMIT. Though the data is being transferred to the target system BDC program with you are calling in ZRFC doesn't commit.
    In the RFC adapter -> Advance Mode -> Commit Control for Single BAPI Calls -> Set the indicator
    If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
    <b>Cheers,
    *RAJ*
    **REWARD POINTS IF FOUND USEFULL <b>

  • Excise Invoice Not creating automatically

    Hello!
                      while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
    -M.Suba

    Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
    Check Customization settings-
    IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
    select your excise group & choose details,
    You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
    Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
    Regards,
    Reazuddin MD

  • Excise Invoice should not get created without J1ID data for all material

    Dear All,
    We  have a requirement that excise invoice should not get generated unless chapter ID data is maintained for all the materials in the invoice.( when there is more than one item and chapter id is not maintained for all the items)
    At present excise invoice is getting generated for single item which has chapter ID maintained and  the items without chapter ID data are left out from the excise invoice. This results in an incorrect invoice.
    We want to ensure that excise invoice is not created, unless all the items in the billing document have chapter ID maintained.
    Kindly advise as to how this can be done.
    Regards,
    T Saravanan

    Dear Muralidhar, Lakshmipathi,
    Thanks for the solution.
    I have been able to solve the problem using the user exit mentioned by you.
    Regards,
    T Saravanan

  • Expense Report Export does not create Invoice in AP

    Hello,
    I have created several expense reports in AP (Running EBS R12, I am not using iExpenses), but when I use the Expense Report Export request, the invoices are not created. I have looked online and found some plausible solutions. None of them have worked: I've made sure the Employee payment method is set up; the Usage rules for payables are also set up for Employee Expenses in the payment processing transaction type. In the Payables Option screen, I have selected the Automatic Employee as a Supplier option.
    Here's the Expense Report Export log:
    Payables: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    APXEXPER module: Expense Report Export
    Current system time is 29-APR-2013 11:09:53
    **Starts**29-APR-2013 11:09:54
    **Ends**29-APR-2013 11:09:55
    Start of log messages from FND_FILE
    Begin Receipts Management - Holds
    Process Hold Each Scenario
    Determine whether to place Holds
    Process Hold All Scenario
    Determine whether to place Holds
    Process Hold BothPay Scenario
    Determine whether to place Holds
    Process Obsolete Holds
    Obsolete Holds
    Obsolete Both Pay Holds
    Begin Processing Individual expense reports
    Fetching expense report...
    Expense Report Number : **110**
    Transfer Attachments option(Y/N):Y
    Fetching expense report...
    Expense Report Number : **REEMBOLSO 25ABR2013**
    Transfer Attachments option(Y/N):Y
    Fetching expense report...
    Expense Report Number : **TEST_ASTRID_EXPENSE**
    Transfer Attachments option(Y/N):Y
    Fetching expense report...
    Expense Report Number : **TEST_EXPENSE_AGSV**
    Transfer Attachments option(Y/N):Y
    Fetching expense report...
    Expense Report Number : **101**
    Transfer Attachments option(Y/N):Y
    Fetching expense report...
    Credit Card Expenses Fetched = 0
    Credit Card Invoices Created = 0
    Call Payables Open Interface
    Expenses Fetched = 5
    Invoices Created = 0
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 4105067      
    Number of copies : 0      
    Printer : noprint
    Finished executing request completion options.
    Concurrent request completed successfully
    Current system time is 29-APR-2013 11:09:55
    What else do I need to do? Am I missing something?
    Thanks in advance,
    Astrid

    I found the answer and I am posting it here in case someone else needs it:
    You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
    Regards,
    Astrid

  • VF04 - SDBILLDL - Invoices not created in background

    A batchjob has been created for the program SDBILLDL.
    The variant has been setup properly when testing it in the foreground.
    A list of sales orders is displayed in the billing due list and it is possible to perform billing in foreground.
    When running the program in background with the same variant, the invoices are not created.
    This was not a problem a few days ago, but at some time, the background billing stopped working.
    Do you have any idea on what might have caused this problem?
    The sales orders have deliveries and delivery related billing is used.
    I have also tested to use the old program SAPMV60S with a similar variant, which works fine in foreground.
    But when running it in background, the invoices are not created.
    Spool problem?

    Hi,
    Background jobs for creating billing docs has to be done using tcode VF06.
    Check the following [thread|Background for billing job in VF06; for more info.
    Regards,
    Amit

  • TCODE : MRRL - invoice not creating

    when i run the MRRL transaction  using the GOODS receipt no and the vendor no.....
    my invoice is not created....what could be the problem.
    regards
    Giri
    *Request : Please don't provide any document link.....since almost all the document shared from the  forum has been tryied even then my issue not resolved.

    ERS settlement: No message was found for partner DJACKSON/company code BP01
    Diagnosis
    You use the evaluated receipt settlement (ERS) procedure to invoice a business partner's (BP01) goods receipts in company code DJACKSON. In order to inform your business partner, you want to create a document using message determination.
    System Response
    If no message record was found for a partner because of the message control settings, meaning that no output message can be created, no invoice documents are created.
    Procedure
    In Customizing for Invoice Verification, check that the data for message determination has been maintained in such a way that an output message can be created for the vendors in the invoice document.
    Execute function
    If you do not want to create a document using message determination, you can switch off this message in Customizing.

  • Excise invoice is not generating through batch-VF04

    Dear all,
    I have created batch for VF04 for creating automatic commercial invoice every after five minute.here is also customization for automatic creation of excise invoice.
    Now the issue is when batch run, it create the commercial invoice automatically but excise invoice does not create while if we create commercial invoice through VF01 then both( Commercial and excise invoice) create automatically.
    Can you please tell me why excise invoice is not creating automatically when i run the batch for VF04.
    Regards
    jalaj garg

    I have the same issue Pl let me if u come across

  • Accounting entry against Excise invoice not created  for Service Tax sales

    Dear all,
        I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
    Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco)  - Domestic(Customer receivable reconciallation) account-Credit entry.
      But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
    Plz. suggest step by step guideline to resolve this issue.
    Thanks & Regards,
    Mukesh Pardeshi

    Hi ReazuddinMD,
    thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
    Now i am geeting error as below at the time of saving Excise invoice,
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

  • Unable to Change Withholding Tax Base Amount while creating Service AP Invoice through DI API?

    Dear All,
    I am trying to create Service AP Invoice through DI API.
    If I post the document without changing SAPPurchaseInvoice.WithholdingTaxData.TaxableAmount the dount ocument is created in SAP without any problem.
    But if I change amount in above field then DI API throws error Unbalanced Transaction.
    If I post same document in SAP with changed base amount it got posted in SAP without any Issue.
    Where I am doing wrong?
    please guide.
    Using:
    SAP B1 version 9 Patch Level 11
    Location : India.
    Thanks.

    Hi ,
    maybe you can find solution to these note 1812344
    1846344  - Overview Note for SAP Business One 8.82 PL12
    Symptom
    This SAP Note contains collective information related to upgrades to SAP Business One 8.82 Patch Level 12 (B1 8.82 PL12) from previous SAP Business One releases.
    In order to receive information about delivered patches via email or RSS, please use the upper right subscription options on http://service.sap.com/~sapidp/011000358700001458732008E
    Solution
    Patch installation options:
    SAP Business One 8.82 PL12 can be installed directly on previous patches of SAP Business One 8.82
    You can upgrade your SAP Business One to 8.82PL12 from all patches of the following versions:8.81; 8.8; 2007 A SP01; 2007 A SP00; 2007 B SP00; 2005 A SP01; 2005 B
    Patch content:
    SAP Business One 8.82 PL12 includes all corrections from previous patches for releases 8.82, 8.81, 8.8, 2007, and 2005.
    For details about the contained corrections, please see the SAP Notes listed in the References section.
    Notes: SAP Business One 8.82 PL12 contains B1if version 1.17.5
    Patch download:
    Open http://service.sap.com/sbo-swcenter -> SAP Business One Products -> Updates -> SAP Business One 8.8 -> SAP BUSINESS ONE 8.82 -> Comprised Software Component Versions -> SAP BUSINESS ONE 8.82 -> Win32 -> Downloads tab
    Header Data
    Released On
    02.05.2013 02:34:18  
    Release Status
    Released for Customer  
    Component
    SBO-BC-UPG Upgrade  
    Priority
      Recommendations/additional info  
    Category
      Upgrade information  
    References
    This document refers to:
      SAP Business One Notes
    1482452
    IN_Wrong tax amount was created for some items in the invoice with Excisable BOM item involves
    1650289
    Printing Inventory Posting List for huge amount of data
    1678528
    Withholding amount in the first row is zeroed.
    1754529
    Error Message When Running Pick and Pack Manager
    1756263
    Open Items List shuts down on out of memory
    1757641
    Year-end closing
    1757690
    SEPA File Formats - New Pain Versions
    1757898
    Incoming Bank File Format
    1757904
    Outgoing Bank File Format
    1762860
    Incorrect weight calculation when Automatic Availability Check is on
    1770690
    Pro Forma Invoice
    1776948
    Calendar columns are wrong when working with Group View
    1780460
    OINM column description is not translated
    1780486
    UI_System crash when you set extreme value of double type to DataTable column
    1788256
    Incorrect User-Defined Field displayed in a Stock Transfer Request
    1788372
    ZH: 'Unacceptable Field' when export document to word
    1788818
    RU loc: No freight in the Tax Invoice layout
    1790404
    Cash Flow Inconsistency when Canceling Payment
    1791295
    B1info property of UI API AddonsInstaller object returns NULL value
    1791416
    Adding a new item to BoM is slow
    1794111
    Text is overlapping in specific localization
    1795595
    Change log for item group shows current system date in all the "Created" fields
    1797292
    Queries in alerts should support more query results
    1800055
    B1if_ Line break issue in inbound retrieval using JDBC
    1802580
    Add Journal Voucher to General Ledger report
    1803586
    Not realized payment is exported via Payment Engine using 'SAPBPDEOPBT_DTAUS' file format
    1803751
    Period indicator of document series can be changed although it has been used
    1804340
    LOC_BR_Cannot update Nota Fiscal Model
    1805554
    G/L Account displayed in a wrong position when unticking the checkbox "Account with Balance of Zero"
    1806576
    Payment Cannot Be Reconciled Internally
    1807611
    Cannot update UDF in Distribution Rule used in transactions
    1807654
    Serial No./Batch inconsistency by canceled Inventory Transfer
    1808694
    BR: Business Partner Code cannot be updated with CNPJ CPF error
    1809398
    CR_Cannot Display Related Multi-Value Parameters
    1809758
    Arrow key not work for Batch/Serial Number Transactions Report
    1810099
    Tax Amount is Recalculated Even if Tax Code Is Not Changed
    1811270
    Upgrade fails on Serial And Batches object with error code -10
    1811846
    Cannot run Exchange Rate Differences when multi branch is activated
    1812344
    Withholding Tax Amount Is Not Updated in Payment Once Witholding Tax Code Is Changed in Document through DI API
    1812740
    DI:"Operation Code" show wrong value when add "A/P Tax Invoice" based on "A/P Invoice"
    1813029
    US_Vendor address on 1099 Summary by Form/Box Report is not updated according to the latest Invoice
    1813835
    Wrong amounts of Goods Return in Open Item List
    1814207
    Preliminary page prints setting does not keep after upgrade
    1814860
    Value "Zero" cannot be imported to "Minimum Inventory Level" field via Excel file
    1815535
    RFQ: Web front end not displayed in supplier language
    1815810
    GT: Adding Incoming Payment for Some Cash Flow Relevant Accounts Fails
    1816191
    BR:System Crashes While Working with Tax Code Determination Window
    1816611
    CR_Crystal Report Displayed Incorrectly Afte

  • Subject:-Tax reduction in invoice is not possible at the time of LIV when c

    Dear SAP expert
    Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
    While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
    Is there any solution available?
    s ap

    Hi,
    In response to your requirement:
    let me clear my business scenario...
    total price of po is usd100 and sales tax is 20%.
    system calculate sales tax separate the reason being the codition type for sales tax is statistical.
    is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
    Regards,
    Ali
    This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
    Also donot make it statistical as you want to include it in the net price calculation.
    Thanks,
    Atal

Maybe you are looking for

  • Solution Manager 4.0 - RFC Connections

    hi there, While ago I configured all my RFC connections within Solution Manager 4.0, and wanted to make sure what are those for: 1. RFC BACK connection (SM_<SID>CLNT<Client no.>_BACK) is used for the SDCCN to collect the session data. But I realized

  • Can i connect an external hard drive to my iMac

    I have recently switched from a windows PC and have transferred all my documents/photos to an external hard drive.  Can I connect this to my iMAC?

  • Problem Using Mail

    I know this isn't really the forum for this but I don't really know where else to go. Anyway, I'm trying to send an email, but when I hit send I get a message that says that my password for the SMTP server has been rejected. I tried the troubleshoote

  • How to update End_date in hr.per_all_people_f

    Hi Team, I have a problem when use API employee. I want to end date of a employee in hr.per_all_people_f table but i don't know any API employee to solve this problem. Pls, Can you help me if you clear this problem? Tks,

  • Easily Setting up IMAP for the iPhone

    The email client application on the iPhone is a bit lean but it's easy to use. When using POP email it downloads the entire message (and attachments if present). If you get a lot of email this takes time and can really eat up your battery. Also, if t