Witholding Tax - SRM 7.0 Ext Classic
Hi,
After creating the invoice in SRM, I check the PO History in R3 4.7 I drill down into the invoice/accounting doc and the witholding tax code does not get populated.
I have already done the following.
Completed all general tax configuration in SRM including defining the witholding tax config for the BE system and vendor. The vendor master in R3 is setup with a witholding tax code and the vendor has been replicated to SRM.
If you simply enter an invoice directly in r3 against this vendor then the witholding tax code is picked up in the accounting doc.
It seems that the new witholding tax config in SRM is not doing anything at all.
Thanks,
Matt
Hi Matt
You can also enter and calculate withholding tax. In some countries, this tax is liable at the beginning of the payment flow and is not transferred by the taxable entity to the tax authorities. You define whether withholding tax is active for a country or a supplier in Customizing for Supplier Relationship Management under SRM Server Cross-Application Basic Settings Tax Calculation Activate Withholding Tax .
if you are very confident. create oss message.escalate to SAP.
br
muthu
Similar Messages
-
SRM MM-SUS for Direct Material ( i.e. Ext Classic Scenario)
Hi Friends,
We are planning to have the Classic Scenario in SRM 7.0 with SUS. So it will be SUS-MM scenarion and it supports only for Classic Scenario,
But when there is a case of Direct Materials [ Manual or through PDP ( Ext Req) ], it is SAP by defaullt setting that , system determine Extended Classic Scenario.
Now , if SUS-MM supports only to Classic scenario ,then we can collaborate the Orders of Direct Material genereted through Ext Classic Scenario in SUS ?
Confused over these contrast . Can any one suggest that how to get both one in SUS-MM ?
Thank you in advance.Hi Alex,
Thanks for reply.
It seems here is some confusion. PDP of Dircet Material is standard SRM secarion where we can soure the requieremnets generted in various SAP Module like PS, PM , SD, APO..etc. So We just hav eintenstion to source the requiermnet in Sourcing cockpit to create the PO .
Okay. For time being , forget the PDP of Direct Material.
Just take the Direct Material ( For which we mention inventory or we procure for stock) only.
By SAP standard / defualt setting , for Direct Material , local PO is generted ,althoug we have mentioned Classic Senrion setting for the same . And it is Extended Classic Scenarion. Right!
At another side , it is SAP standrad that SUS-MM senarion support for only CLASSIC SCENARIO.
Then , my conern is how we can send these Local orders for dircet Material to Supplier via SUS ? Wether it is not possible ? -
R/3 Backend PO in SRM for Confirmation in Ext. classic scenario
Hi,
We are on SRM 4.0, Extended classic scenario
User created STO(Stock transport order) in backedn R/3(Not in SRM) and is visible in "Confirmation /GR services" in SRM.
But when user tries to do confirm it the items are not available and confirmation is not possible in SRM.
Is there anything missing in the system ? Please suggest
Best regards,
Sambitit should be updated by running standard progarams which updated the status of the corresponding documents in R/3
-
Hello Experts,
Can any one explain or send docs for Configuration of witholding tax configuration for Customers
[email protected]Configuration Guide
1 Overview
This configuration guide provides the information you need to set up the configuration for withholding tax under Financial Accounting. It covers configuration relating, classic withholding tax, extended withholding tax.
2 Configuration
2.1 Organization structure
2.1.1 Organization Setup Step
N.A
2.1.1.1 Use
N.A
2.1.1.2 Prerequisites
N.A
2.1.1.3 Procedure
1. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu <IMG Menu path>
2. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
- In above table enter the field name, description, and usage of every relevant field.
- In the table below, list down all the actual values set up in the client. Add or delete columns as necessary.
<Field -1> <Field -2> <Field -3> <Field -4>
Value 1-1 Value 2-1 Value 3-1 Value 4-1
2.2 Process Configuration for withholding Tax
The following are the configuration steps for Withholding tax.
2.2.1 Classic withholding Tax
Maintain Countries
Maintain Types of Recipient
Define Income Types
Maintain Tax Codes
Define Form Names for Extended Reporting
Define Output Groups
2.2.1.1 Maintain Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.1.1.1 Use
Used For printing the withholding tax forms.
2.2.1.1.2 Prerequisites
N.A
2.2.1.1.3 Procedure
3. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings Maintain Countries
4. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.1.2 Maintain Types of Recipient
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.1.2.1 Use
Used For printing the withholding tax forms.
2.2.1.2.2 Prerequisites
N.A
2.2.1.2.3 Procedure
5. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Maintain Types of Recipient
6. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Rec. Type Type of recipient"
Description Description of recipient type
2.2.1.3 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.1.3.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.3.2 Prerequisites
N.A
2.2.1.3.3 Procedure
7. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Define Income Types
8. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.1.4 Maintain Tax Codes
The income type is a classification of your (foreign) vendors according to income.
2.2.1.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.4.2 Prerequisites
N.A
2.2.1.4.3 Procedure
9. Access the activity using the following navigation options:
Transaction Code OBC7
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Calculation Maintain Tax Codes
10. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
W.tax code The tax codes are unique per country
Description Text of the tax code
Off.w. tax .code Key which is used for withholding tax reporting on official forms.
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code
Net base for tax contributions Indicator that the taxes on sales/purchases are not used in the base amount for withholding tax.
Currency Currency of the minimum amount defined for the withholding tax report
Minimum Amount Field used define minimum tax it is used for Japan only N.A
Withholding tax rate Percentage rate used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Reduced Rate Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Withh. tax formula withholding tax is to be calculated according to a special procedure
Germ. reunification tax German Reunification Tax for the Withholding Tax N.A
Posting with payment The payment amount is reduced by the withholding tax amount posted
Region The region forms part of the address
Provincal tax code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain). N.A
Income type Type of income subject to withholding tax
2.2.1.5 Define Accounts for Withholding Tax
You define the account numbers of your withholding tax accounts. The system posts the tax amount to these accounts when clearing open items.
2.2.1.5.1 Use
Used for document posting in FI.
2.2.1.5.2 Prerequisites
N.A
2.2.1.5.3 Procedure
11. Access the activity using the following navigation options:
Transaction Code OBYS
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Postings Define Accounts for Withholding Tax
12. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction QST The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Tax code used to differentiate account determination
Account GL account no.
2.2.1.6 Define Form Names for Extended Reporting
You define the names of the forms for the withholding tax return to your vendors.
2.2.1.6.1 Use
You can use the form ID to define country-specific forms.
2.2.1.6.2 Prerequisites
Form should be there
Company code
2.2.1.6.3 Procedure
13. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Reporting Define Form Names for Extended Reporting
14. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Program name The name of the program you want to edit
Company code The company code is an organizational unit within financial accounting.
Form ID The identification for a form or a form set enables you to access a particular form or set of forms from a selected group of forms
Form Form which is to be displayed
2.2.1.7 Define Output Groups
You define the combination of outputs which is required for a given data source
You would define two output groups in Customizing:
One to define the data selection (accounts payable, etc.) and the form and file to be used.
One to define a data selection (accounts receivable, etc.) and the list to be used.
2.2.1.7.1 Use
You can for different reporting purpose..
2.2.1.7.2 Prerequisites
Form
DME Engine
2.2.1.7.3 Procedure
15. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Generic Withholding Tax Reporting Define Output Groups
16. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Process Type type of process that will be triggered by the program
Output Group Indicates the output group as used in withholding tax reporting. An output group is the combination of outputs which is required for a given data .
Customizing view withholding tax scheme in your country
Reported doc. You can choose in which context the withholding tax data is to be displayed
Open items selecting this option will allow you to see also the open items
Group item according to fiscal year items belonging to vendor/customer B are listed together with items of vendor/customer A if A is specified as fiscal address of B.
No exemptn data Excludes data relating to withholding tax exemption
No tax data Excludes data relating to taxes on sales/purchases
Title of output list focused on The output list is divided into four sections, covering Various information
Form printing Description for printing form
DME File Using this parameter, you can control whether the data medium exchange should be carried out to a temporary sequential file
Format tree Used together with the DMEE tree type to uniquely identify a format tree
Tax Ref.1 There is a parameter type for every additional parameter for a company code
Tax Ref.2 There is a parameter type for every additional parameter for a company code
User Program Your report should contain a form
2.2.2 Extended withholding Tax
Withholding tax Country
Extended withholding tax Malaysia, Singapore, Brunei, Nepal ,Thailand
Check Withholding Tax Countries
Define Withholding Tax Codes
Check Recipient Types
Define Income Types
Define Withholding Tax Type for Invoice Posting
Define Withholding Tax Type for Payment Posting
Define Rounding Rule for Withholding Tax Type
Define Withholding Tax Codes
Define Formulas for Calculating Withholding Tax
Portray Dependencies Between Withholding Tax Types
Define Min/Max Amounts for Withholding Tax Codes
Assign Withholding Tax Types to Company Codes
Activate Extended Withholding Tax
Define Accounts for Withholding Tax to be Paid Over
Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
Define Accounts for Self-Withholding Tax
Define Accounts for Withholding Tax Offsetting Entry
Define Numbering Classes
Define Numbering Groups
Define Number Ranges
Assign Numbering Group to Numbering Class
Assign Numbering Group to Numbering Class
Numbering Concept Option 1: Assign Numbering Class
Numbering Concept 4: Assign Numbering Group
Assign Forms for Withholding Tax Certificates
Define Minimum Amounts per Withholding Tax Code
Define Output Groups
2.2.2.1 Check Withholding Tax Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.2.1.1 Use
Used For printing the withholding tax forms.
2.2.2.1.2 Prerequisites
N.A
2.2.2.1.3 Procedure
17. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Withholding Tax Countries
18. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.2.2 Define Withholding Tax Codes
If your national tax authorities use withholding tax keys to identify the different withholding tax types, you can define these official names for your tax codes here.
2.2.2.2.1 Use
System can therefore assign the withholding tax items to the correct withholding tax return.
2.2.2.2.2 Prerequisites
N.A
2.2.2.2.3 Procedure
19. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Define Withholding Tax Codes
20. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Official Key Official withholding tax codes are defined which must be included in official reports.
Name Description of official key
National tax code With this value you can classify every official tax key. This information is required on certain legal reports
Country Off. w/tax key Nat. Tax Code Text (40 characters)
NP COMN Commission
NP CONT Contractors
NP DIVD Dividends
NP INTR Interest
NP MANT Maintenance
NP PROF Professional
NP RENT Rent
2.2.2.3 Check Recipient Types
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.2.3.1 Use
To print from for vendors.
2.2.2.3.2 Prerequisites
N.A
2.2.2.3.3 Procedure
21. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Recipient Types
22. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
With holding tax type This indicator is used to classify the different types of withholding tax
Rec. Type The type of recipient can be defined in the vendor master record
Text Description of Rec. type
Country Withhld tax type Recipient type Text
NP I1 NR Non - residents
NP I1 PN Person Not Registered
NP I1 PR Person Registered
NP P1 NR Non - residents
NP P1 PN Person Not Registered
NP P1 PR Person Registered
TH I1 3 Phaw.Ngaw.Daw. 03
TH I1 53 Phaw.Ngaw.Daw. 53
TH I1 54 Phaw.Ngaw.Daw. 54
TH I2 3 Phaw.Ngaw.Daw. 03
TH I2 53 Phaw.Ngaw.Daw. 53
TH I2 54 Phaw.Ngaw.Daw. 54
TH P1 3 Phaw.Ngaw.Daw. 03
TH P1 53 Phaw.Ngaw.Daw. 53
TH P1 54 Phaw.Ngaw.Daw. 54
TH P2 3 Phaw.Ngaw.Daw. 03
TH P2 53 Phaw.Ngaw.Daw. 53
TH P2 54 Phaw.Ngaw.Daw. 54
TH W1 2 Phaw.Ngaw.Daw. 02
TH W1 3 Phaw.Ngaw.Daw. 03
TH W1 53 Phaw.Ngaw.Daw. 53
TH W1 54 Phaw.Ngaw.Daw. 54
TH WP 2 Phaw.Ngaw.Daw. 02
TH WP 3 Phaw.Ngaw.Daw. 03
TH WP 53 Phaw.Ngaw.Daw. 53
TH WP 54 Phaw.Ngaw.Daw. 54
2.2.2.4 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.2.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.2.4.2 Prerequisites
N.A
2.2.2.4.3 Procedure
23. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Define Income Types
24. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.2.5 Define Withholding Tax Type for Invoice Posting
You define the withholding tax type for the posting at the time of entering an invoice. This withholding tax type does not have any effect on the payment.
2.2.2.5.1 Use
The withholding tax type used for the posting at the time of entering an invoice.
2.2.2.5.2 Prerequisites
N.A
2.2.2.5.3 Procedure
25. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Invoice Posting
26. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
Base amount Reductn the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with mnth
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
No cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
2.2.2.6 Define Withholding Tax Type for Payment Posting
You define the withholding tax type for posting at the time of paying. You also have to enter the withholding tax information when entering the document for this withholding tax type. (Only for Thailand)
2.2.2.6.1 Use
The withholding tax type used at the time of posting.
2.2.2.6.2 Prerequisites
N.A
2.2.2.6.3 Procedure
27. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Payment Posting
28. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif .net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Cash discount W/tax pre c/dis,
c/dis pre w/tax
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with month,
Combined Accum
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
Self W/holding When you come to make a payment, you can then decide, on a case by case basis, whether self-withholding should apply
W/Tax alrdy w/hd the amount can be entered when you post the invoice
W/tax for Pmnt the withholding tax amount can be entered manually for incoming and outgoing payments
No.Cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
Central invoice No centr.invoice,
Cent.inv & 1st p.pmt,
Central inv.prop. indicator, "Central invoicing" is not applied to this withholding tax type. N.A keep it as no.
Minimum check Minimum check at item level,
Check min base amnt at pmnt doc level,
Min .base amnt check at doc invoice level,
Amount min.check at payment doc level,
Tax exempt amount check at Document level You can select any indicator system calculate the tax and post after checking the specified base amount
2.2.2.7 Define Rounding Rule for Withholding Tax Type
You define rounding rules for the individual withholding tax types.
2.2.2.7.1 Use
Rounding rules only apply to the posting of withholding tax amounts in the appropriate company code
2.2.2.7.2 Prerequisites
N.A
2.2.2.7.3 Procedure
29. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Rounding Rule for Withholding Tax Type
30. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code NP01 The company code is an organizational unit within financial accounting.
W/th .type I1,P1 This indicator is used to classify the different types of withholding tax.
Currency NPR Currency key for amounts in the system.
Unit 100 Unit to be round off
2.2.2.8 Define Withholding Tax Codes
You define the withholding tax codes rounding for calculating withholding tax.
2.2.2.8.1 Use
Used for calculating the withholding tax.
2.2.2.8.2 Prerequisites
N.A
2.2.2.8.3 Procedure
31. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Withholding Tax Codes
32. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Off.W/Tax Key official withholding tax codes are defined which must be included in official reports
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
Post.Indic If you set this indicator tax amount is deducted accordingly
1 - Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
3- Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
With/tax rate This is the percentage rate applied to the withholding tax base amount to arrive at the withholding tax amount
With /tax rate ( fraction) Withholding tax rate counter, if the rate can be entered as a fraction
W.tax From Indicator that withholding tax is to be calculated according to a special procedure
Region The region forms part of the address
Prov.tax.code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain).
Income type Type of income subject to withholding tax
2.2.2.9 Define Formulas for Calculating Withholding Tax
You define formulas (scales) for calculating withholding tax. In order to use a formula for calculating withholding tax, you must enter the national currency in the Currency key field of the relevant company code.
2.2.2.9.1 Use
Used for defining the specification like from which date ,up to what amount the tax rate is applicable
2.2.2.9.2 Prerequisites
N.A
2.2.2.9.3 Procedure
33. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Formulas for Calculating Withholding Tax
34. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
currency Currency key for amounts in the system.
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Wcty an additional country is needed for calculating or reporting withholding tax
Valid from The date valid from
To base amnt Maximum withholding tax base amount up to which the withholding tax rate specified is to be used
Whld Tax Percentage rate, which is used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Red RT Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Reduce.base amt. Amount by which the base amount is to be reduced in order to determine the withholding tax amount by means of the withholding tax rate
Dec.red.bse.amt Amount by which the base amount is to be reduced with withholding tax exemption in order to determine the withholding tax amount by means of the decreased withholding tax rate
2.2.2.10 Portray Dependencies between Withholding Tax Types
You can represent dependencies between withholding tax categories.
2.2.2.10.1 Use
You can use in a sequence of withholding tax in a sequence.
2.2.2.10.2 Prerequisites
N.A
2.2.2.10.3 Procedure
35. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Base Amount Portray Dependencies Between Withholding Tax Types
36. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax type no. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Depend on type no. Sequence number of the withholding tax type whose withholding tax amount has some influence in the calculation of the withholding tax base amount
Table values
Cty Wth.t.type W/tax no. Depen.type Name
NP I1 1 Invoice posting - EWT
NP P1 2 Payment posting - EWT
2.2.2.11 Define Min/Max Amounts for Withholding Tax Codes
you define minimum and maximum amounts for withholding tax codes. In the withholding tax base exemption amount field you can specify an amount which is deducted when calculating the with holding tax base. The amount of the tax exemption does not have any effect when matching the withholding tax base with the minimum, because the base and the minimum are matched before the tax-exempt amount is deducted.
2.2.2.11.1 Use
Used for exemption amount field you can specify an amount which is deducted when calculating the with holding tax base.
2.2.2.11.2 Prerequisites
N.A
2.2.2.11.3 Procedure
37. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Minimum and Maximum Amounts Define Min/Max Amounts for Withholding Tax Codes
38. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax Code One or more "withholding tax codes" are assigned to each withholding tax type.
Currency Currency key for amounts in the system.
Valid from The date valid from
Minimum W/tax amount Minimum withholding tax amount. The withholding tax amount calculated if only posted if it exceeds this minimum amount.
Maximum W/tax amount Maximum withholding tax amount. If the withholding tax amount calculated exceeds this maximum, the system posts the maximum amount (and not the actual tax amount
Minimum base amount Minimum withholding tax base amount.
W/Tax bse exem.amount The withholding tax base exemption amount is deducted from the base amount before the withholding tax amount is calculated
2.2.2.12 Assign Withholding Tax Types to Company Codes
You assign withholding tax categories to company codes.
2.2.2.12.1 Use
To work with withholding tax .
2.2.2.12.2 Prerequisites
Company code
Tax code
2.2.2.12.3 Procedure
39. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Assign Withholding Tax Types to Company Codes
40. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Withhld tax type This indicator is used to classify the different types of withholding tax.
Recipient type The type of recipient can be defined in the vendor master record
With/tax agent you tell the system that for this withholding tax type, the company code is entitled to withhold tax on behalf of a vendor
W/Tax obligated from Date from which.The company code is obligated to withhold tax for the given withholding tax type
Oblig. to W/Tax Until Date to which. The company code is obligated to withhold tax for the withholding tax type.
W/tax Number This is a number issued by the tax authorities per withholding tax type.
Subject to W/tax you tell the system that the company code for this withholding tax type is subject to withholding tax.
Self Withhldg agent the company code can withhold tax on its own behalf for this withholding tax type
Wxeption number Numbered assigned by the relevant authorities for exemption from withholding tax.
Exemption reas. used to classify different types of exemption from liability to a particular withholding tax.
Exemption rate Rate of exemption from withholding tax.
Exempt from Date from which withholding tax exemption applies.
Exempt to Date up to which withholding tax exemption applies.
2.2.2.13 Activate Extended Withholding Tax
You can activate extended withholding tax.
2.2.2.13.1 Use
To work with extended withholding tax.
2.2.2.13.2 Prerequisites
Company code
2.2.2.13.3 Procedure
41. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Activate Extended Withholding Tax
42. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Extended w/tax You select this indicator; you activate extended withholding tax processing.
2.2.2.14 Accounts for Withholding Tax to be Paid Over
You define the accounts for the withholding tax to be paid over.
2.2.2.14.1 Use
Used for posting extended withholding tax.
2.2.2.14.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.14.3 Procedure
43. Access the activity using the following navigation options:
Transaction Code OBWW
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Withholding Tax to be Paid Over
44. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction WIT The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.15 Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
You can define the accounts for the withholding tax offsetting entry for the "grossing up" procedure .
2.2.2.15.1 Use
Used for posting extended withholding tax.
2.2.2.15.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.15.3 Procedure
45. Access the activity using the following navigation options:
Transaction Code OBWU
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
46. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction GRU The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.16 Define Accounts for Self-Withholding Tax
You can define the accounts to which withholding tax is posted.
2.2.2.16.1 Use
Used for posting extended withholding tax.
2.2.2.16.2 Prerequisites
GL Account must exist in company code
2.2.2.16.3 Procedure
47. Access the activity using the following navigation options:
Transaction Code OBWS
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Self-Withholding Tax
48. On the Overview screen, make the following entries: -
Friends,
I have a question about 1099 witholding. We are configured with classic and extended witholding tax. Currently my company is not witholding tax, but now for only few vendors they want to witholding 30% tax and for rest not withold. How can I do this for just few vendors, and not others and where do I do.
Also when we withold tax, it should do automatic posting. How can I accomplish this and what account should I set debit and what as credit.
Please give me a solution.
Thanks for your help.
Ritu.Hi
Steps
1. Check withholding tax countries
2. Define official withholding tax code
3. Define business places
4. Maintain factory calendar
5. Assign factory calendars to business place
6. Define Ex. Withholding tax types for invoice postings
7. Define EX withholding tax types for payment posting
8. Define Ex. Withholding tax codes
9. Portray dependencies between tax types
10. Check recipient types
11. Maintain due dates
12. Assign Ex. Withholding tax types to Company code
13. Activate Ex. Withholding tax
14. Maintain surcharge calculation methods
15. Maintain surcharge Tax codes (separate tax codes)
16. Maintain surcharge rates (surcharge combined with basic WH tax codes)
17. Create a G/L a/C for Ex. Withholding tax
18. Define A/C for Ex. Withholding tax (OBWW)
19. Make changes in Vendor master (XK02)
20. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain
Company code settings
21. Specify the document type
22. Maintain number groups
23. Maintain number ranges
24. Assign number ranges to number group
25. Maintain number groups and SAP script form (for TDS certificates)
26. Maintain number ranges
27. Maintain number ranges to number groups
28. Postings (F-43)
29. Enter remittance challan
30. Enter bank challan
31. Printing of TDS certificates
32. Printing of annual return
regards,
R.Ramakrishnaraj -
Hi All,
Aim desperately looking for help from all the quarters regards to UK witholding tax Specially how to handle CIS vendors.
Our client has just upgraged to ECC 6.0 and prior to that on 4.7 version the users were able to manually input the w/tax on CIS vendors invoice based on service and the materials consumed in fb02 trans.
But with ECC 6.0 that particular functionality is lost and some how client is hell bent on reterieving this functionality.
Any ways if anybody out there has implemented w/tax I mean extended or classical can you pls share your now how with me.
Thanks for your time and effort
RegardsHi Sufiyan
We encountered a similar situation and we chose to use a BAPI instead which can handle W/tax .
What happened in your case. Could you let me know how you dealt with it please?
Many thanks
Venkatarao -
Hi there,
i have a problem while I'm adding an AR Invoice Document contented witholding Tax, using DI API 2005 SP01.
i have an error message "Total Taxable amount of all rows exceeds the based amount"
Seems like the base amount is never filled, because in the DI API i can not find a way to fill it (base amount is a read only field).
does anyone know how to solved this issued
thanks for all your solution
rgds
alvinHi Edward,
thanks for your quick reply
regarding to your answer,
i'm using the latest patch of 2005A SP01 (PL 22)
if i created via SBO interface (GUI), as we knew that base amount in WTax Table
is filled automatically depend on Total Before Discount (in case of Net), but
my problem is when i create via DI API (SDK) object (Witholding Tax Object) (not using SBO GUI). I cannot set the base amount value, so I got those Error message which i already posted above.
Please your advice
Thanks & rgds
alvin -
I am trying to compensate two open line items (which refere to the same document) and for which we did a payment in advance.
In F-53 we set the indicator for Special Ledger(we work with special ledger to payment in advance) but witholding tax calculation is wrongly done. Otherwise if we do no set the indicator for Special ledger the calculation is properly done (but in this case the value paid in advance is not considered...so we can't do this).
Please, could someone help me??
I've already checked vendor master data and witholding tax is properly defined. I also checked the open line items and they look ok.
Tks,
NaejDear all,
without a practical example with all the posted documents and the business process, is very difficult to help You. Anyway the down payment ia a payment in advance and It should contain WT amount in case Your vendor has the WT type defined at the payment time. When You do the final payment by f-53 and You clear the DP and the invoice, the System should contains two WT line items: the first with the amount equal to the one posted into the Down payment and with the contary sign, the second that contains the total calculated WT amount.
I hope this helps.
Mauri -
Company code 1000's witholding tax reference number is missing
Hello All,
We are running the report RFIDYYWT / t.code S_P00_07000134 for the first time to file tax returns in the US.
And we see the following errors;
27 Company code 1000's witholding tax reference number is missing
28 EDI identifier for company code 1000 is missing
I did check the Additional Data for our US company code on OBY6 but there are no fields as such for Withholding Tax Reference and EDI Identifier.
Also checked the Output Group US1 config under Withholding Tax. Not sure about Parameter Types "Tax Ref. 1" and "EDI Ref." fields.
I see different threads with similar issues but could not find a solution for this specific problem. Could someone help us fix this problem so we can file this year's returns on time ? This is turning out to be a critical issue for our Finance team ...
ThanksFound it - for US company Code, I went into the additional data of OBY6 and scrolled to the "Next Page". The namTax number USA (TIN) can be discovered, in the hidden pages of SAP
-
How to show the witholding tax name instead of the code in PLD
Hi Guys,
Is it possible to show the witholding tax name instead of the witholding tax code in the summary or end of report in the PLD(AR Invoice)?
Thanks.
EricHi Eric
I have tried to get it directly from the table: Witholding Tax, field: WTaxName; but there's no way to relate that with the A/R Invoice document so it shows me a wrong WT Name.
As this tables is not directly exposed/related to the document the best way is try to create a Formatted Search in order to get the description you want. Please note the WT is get from a table and if you have more than 1 type of WT it may not work in a End of Report as it does not have the capacity as repetitive area to read multiple lines.
Paulo Calado
SAP Business One Forums Team -
RPUQSTC0 - Witholding tax update
Hi all,
I need to update Swiss witholding tax information for 2007 and I find out that I can do it with the files from Cantonal Tax Office and the report RPUQSTC0.
I have the files but I can't find documentation regarding the report.
Where can I find more information?
Regards.Hi,
The reason could be, end user may entered the TDS line items manually, instead of automatic update.
I will tell u the situation clearly.
When we try to post an invoice, system will pop up for TDS data, if we press ok, it will calculate automatically. If it was posted automatically, then the same information will be updated in WITH_ITEM table. You can get this information, whether it was entered manually or automatically by using t.code:FB03
Enter the relevant document no, then click on With holding tax Tab available in menu bar.
If you can find the data in that box, it was updated automatically, if that box was blank, then it is sure that end user entered that TDS line items manually.
If you need any further clarification call me on mobile. We had this issue long back.
If it was entered manually, the only solution is to reversal.
Otherwise they has to issue to manual certificates to the vendor.
All the best
Prasad
9848682357 -
Withholding tax report clarification: Witholding tax base not excluding VAT
HI
In witholding tax settings we have settings to to take NET amount as base.
But for the entries where VAT is manually given Withhloding tax base is not excluding VAT?we are having an entry where we are inputting VAT manually using FB60.entry would be
DrStock
DrVAT
Cr Vendor.
WHY IS THIS?
Where as it is taking net amount as base correctly for the cases where VAT is automatically calculated
How is automatic calculated VAT is related to witholding tax base amt?
rgdsHi,
This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
Therefore please update with more information or close thread.
Thank you for your assistance.
Regards,
Brendan.
(ERP FI/CO SDN/WIKI Moderator)
http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials -
Witholding Tax Information system (J1INMIS) Not updating (FICA)
Hi Experts,
We are using ECC 6.0 recently we upgrated with EHP 5. And the current system (FICO) is working fine with TDS calculations and Witholding Tax Information system (J1INMIS) gets updated perfectly.
We are implimenting FICA (student Accounting). FICA has a provision to calculate the TDS so all TDS Calculations done in FICA.
While we transfer the data from FICA to FICO all GL's gets update even TDS GL also getting update. But when I Check the Report Witholding Tax Information system (J1INMIS) the TDS calculated from FICA is note appearing in this report. But appearing in TDS GL's.
I assume FICO system will not have any Vendor information because In FICO all vendor balances will get update to only reconciliation key as vendor are in FICA system.
Another problem is how I can take TDS Certificates for vendors If the Tax Information system doesn't update.
Please suggest.....
Kind Regards,
ShivajiTo get TDS certificate we use T code J1INMIS, Pls dont go to This T code: Follow this:
1. J1INCHLN
2. J1INBANK---Bank no, will be Check Issue A/C.
3. J1INCERT----In this document date should be end of the month date exampl=31/03/2011
After giving all the details in J1INCERT
select - Ctrl S (Save the document_
you will see the below screen (Variant) give variant name XXX Description (Check Printing)
save, you will get 16A Form. -
Question about witholding tax report S_PL0_09000447
Hi,
I have a question about the witholding tax report: S_PL0_09000447
For some vendors, no deductions are made, but the payments to those vendors should appear on the witholding tax report.
How is the report being created?
Kind regards,
LindaThank you.
Kind regards,
Linda -
Dear all,
I'm trying to Execute Generic Witholding Tax Repoting.
but i am getting Message like no recores were select. i posted many docs with Withlolding tax for customer and Vendor's.
pls help me what could be the problem.
Regards,
KrisHi,
check the bank GL weather its having the tick mark of relevent to cash flow. if not tick it n try again.
Regards,
Raghav
Maybe you are looking for
-
TAX_REPORTING_SITE_FLAG is invalid
Hi, We have requirement to fetch the existing data from po_vendor_sites_all table and modify the vendor_site_code, Distribution_set_name and Paygroup Lookup code, Then insert the same data into ap_supplier_sites_int table with status as "NEW". Here w
-
Starting computer only. Blue screen appears, how do I resolve this?
I recently had to upgrade my hard drive on my MacBook pro 13 inch 2010. I reinstalled my back up from time machine and performed an update. Aft that it has not worked and only displays a blue screen and nothing else. Does anyone have any suggestion
-
Updates are nothing to be afraid of
I come in here quite frequently because I see people who are afraid of making updates because other people's experience here, and help out those who have made updates who have failed to take the proper precautions when one does update. I post this po
-
Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.
-
Sun Java System Portal Server 7 is not starting!!!
Hi All, I have successfully installed Sun Java System Portal Server 7 on RHEL 4.The problem is that after installation when I tried to access the portal throught its url it give the message "Connection to the host refused". If anyone has got idea abo