Without flash, it seems that us iPad users are copping out on lots of browsing activity. When are we going to get a flash compatible plug in? Very frustrating...
Without flash, it seems that us iPad users are copping out on lots of browsing possibilities on the Internet. When are we going to get a compatible flash plugin??
It will never happen. Adobe announced sometime ago that they will no longer develop Flash for mobile devices, so once again, it is never going to happen for iOS devices.
There are browsers in the App Store that allow for some Flash content. Photon, Sky Fire, Puffin, look at a couple of those,
Similar Messages
-
When I want to randomly play (shuffle) all my songs, it seems that the same songs are being played. I've got over 13,000 songs loaded - it seems to me that I shouldn't be getting any repeats. I unrated all the songs, thinking this might affect how often a song gets picked to play. Any suggestions? Thanks!
When I want to randomly play (shuffle) all my songs, it seems that the same songs are being played. I've got over 13,000 songs loaded - it seems to me that I shouldn't be getting any repeats. I unrated all the songs, thinking this might affect how often a song gets picked to play. Any suggestions? Thanks!
-
I have been given an iphone 4 from one of my friends it seem that prior to ios 7 coming out he coudnt wait so he ilegally downloaded the software and now i can't activate it as it says my iphone is not regestered please help!
Then you should talk to that person. Apple won't help you if the iOS was downloaded illegally, and since this is their community, due to Terms of Use, no one here will help you either.
-
I want to check that how many users are connected to the wifi which i m using at present
i want to check that how many users are connected to the wifi which i m using at present???
Go to Utilities > Airport Utillity
If you click on your router it should show you the "wireless clients" that are connected -
during the verification phase of burning photos it fails yet it seems that all the photos are there?
Greetings,
Verification occurs after the burn is complete. The computer goes back to check the disk it just completed burning for errors. The disk is burned, it just didn't burn to the computer's satisfaction and may contain errors that will prevent it from working either on this computer or others. Then again it may work fine if it is a very minor error.
Common causes:
Low quality DVD/CD media
DVD/CD media that does not match the specifications for the drive in the computer
Resolutions:
Buy a brand of DVD/CD that has a reputation for making quality media
Check to see what speeds your optical drive in your computer supports: http://support.apple.com/specs/#imac
--- Once you locate your model on the specs page search for the word "optical" and make note of the speed of disks the drive uses. If your drive says it burns at 8x for example and you purchase a 16x disk then the disk does not match the drive.
Hope that helps! -
Why my IPAD 4 BATTARY RUNS OUT IN 35 Minute from ios7 when it was ios6 it was fine
why my IPAD 4 BATTARY RUNS OUT IN 35 Minute from ios7 when it was ios6 it was fine
Try restore to Factory Default.
-
Was gifted with an iPad2. Do not have Internet service connected to it. Would like to purchase WIFi access for an upcoming trip. Am a Verizon phone customer, but was told that my iPad is not a Verizon enabled iPad. So, what should I do now? Am aware of free Wifi access in many places, but I want to be sure to have constant access and hope some of you can teach me. Thanks!
To use wifi you just need access to a wifi network (and it's password if the network is password protected). If you want to be able to get online when you don't have access to a wifi network then if you have a iPhone you might be able to use that and it's network as a personal hotspot for the iPad (if your carrier supports it), or you can get mifi devices which take sim cards (and therefore also use a cellular network) and which act as mobile hotspots - for either of those to work you would need to be in area that is covered by the phone's/mifi's network
-
Why does it seem that Apple Wifi products are simply not that good?
Hello,
I purchased an AP Extreme base station about 4 months ago. To say that I am under-whelmed would be an understatement. I was not impressed with the AP Express I purchased as well. It seems that the products simply do not live up to the expectations. From the other manufactures, I had no such problems as:
1. Constant drop outs.
2. Lose of signal when the base station was sitting right next to the computer.
3. Low signal when the base station was sitting right next to the computer.
4. No connectivity and trouble joining the network when the base station was sitting next to the computer.
I have been patient, applied the upgrades (seem to make things even worse if that is possible), and still I feel cheated by Apple because their products simply do not work as advertised. This leads me to think that the 802.11N will also be a money pit. As I type this, the signal is completely gone between my AP Extreme and MBP 17 inch. Gone and the AP E is sitting less than 4 meters away. I have changed frequencies, changed positions (remember, I located it less than 4 inches away and it still could not find or had limited signal strength), done everything possible that I can think of. If anyone has a suggestion other than buying anymore Apple wifi products, I would greatly appreciate this.
I have taken the new 802.11N off the table to purchase, I would suggest others do the same. They simply do not work as Apple promised.Sorry Steve,
I realized I did not answer your question. I have one of the new one's. Core Duo 2's. What are you doing to help your friend? I am willing to do anything now. I have repositioned my AP Extreme, changed channels, reduced power, sacrificed a goat, ran around the house three times and howled at the moon. Nothing seems to work. My wife's iBook (PPC) works like a champ. Strong signal no matter when she goes with it. -
All other carrier S4 phones have the option to turn infinite scrolling on/off. However with Verizon there is no option and it is turned off. Every forum I go to says that you have to root the device to turn it back on. VERIZON are you going to listen to the myriad of people the would like this option, a basic option advertised for the Samsung S4? Please PLEASE PLEASE give us the option back.
See the other threads on this issue/non-issue.
Search the Community forum box at top right, or look at trending content. -
my ipad will not connect to yahoo or aol mail, anymore. my mother is having the same problem and also a cousin, in a different state. my cousin and i upgraded to ios 6 and my mother did not. i do not understand why this is happening.
I should add that i have also done:
- reset (holding two buttons)
- updated software to latest IOS
- done a full restore to original settings
None of this has solved the problem. -
iPad seems buggy, iMac simply not connected to syncing contacts (and focusing on it, not on Safari bookmarks either)
iPad example:
Two entries exist for a contact on iPad, identical or differing slightly (e.g. a space being added before a word or identical in one but not the other). I delete one of the entries and both entries disappear from ipad, iphone, icloud. Entry persists on iMac.
iMac:
iCal syncs. Mail syncs. Calendar doesn't. Bookmarks aren't syncing either: A recent add to Safari bookmarks that has synced elsewhere has not synced on iMac.
On the iMac, when I go to iCloud in network settings all boxes are checked except Photo Stream, Back to My Mac, and Find My Mac. Account details show my email address, my name and Description "iCloud". The amount of GB available in iCloud storage, which matches what I see on my iPhone.
iMac: OSX 10.8.5, 2 GHz Intel Core 2 DuoThanks for the suggestion, Barney-15E. FYI I am not running both iCal and Calendar. Just Calendar. Me bad for using the old name and new name interchangeably.
Tackling the iMac problem: In iCloud network preferences, I unchecked Safari then soon after rechecked it, and your suggestion appears to have worked: a bookmark recently added on one of the other devices appeared in the iMac Safari bookmarks. So far so good.
Did the same thing with contacts. The iMac took a couple of hours to restore the sync setting, but it finally completed the task. The computer was laboring so I rebooted. Then I opened the contacts application and saw the spinning grey bars next to the "iCloud" heading above my list of contact groups. Some time later the spinning lines were replaced by an exclamation point. I clicked on it and got the message that the operation could not be completed because of a "CoreDAVErrorDomain error 1..". Subsequently, after much spinning of the line wheel, I have gotten either the exclamation point with the CoreDAV message or a lightning bolt icon. Whether exclamation point or lightning bolt, clicking on it provokes a long period of the spinning line wheel. And looking at some telltale contact discrepancies between the iMac and the other machines, nothing seems to have changed in terms of merging the discrepancies.
Searching for the error message in the support community, I see this has happened to others, and they have had some success in following a list of steps starting with archiving the contacts, which I have done. Don't think I fully follow the other steps, nor am I sure they apply to my situation. -
Script that enables mail users and kicks out two csv files
I am working on a script that will mainly be used as a scheduled task to enabled mailuser by calling the update-recipient command.
But before it calls that command it will get for various issues that can cause errors.
Missing PrimarySMTP
Display name having a space at front or back.
The external email address being blank.
I have IF statements setup to check for those and then call a function that will save into an array the issue for that user.
Here is the script
<#
.SYNOPSIS
Enable-MailUsers Synced Mail Users in the Exchange environment
THIS CODE IS MADE AVAILABLE AS IS, WITHOUT WARRANTY OF ANY KIND. THE ENTIRE
RISK OF THE USE OR THE RESULTS FROM THE USE OF THIS CODE REMAINS WITH THE USER.
Version .9, 30 June 2014
.DESCRIPTION
This script mail-enables Synced Mail Users and creates a CSV report of mail users that were enabled.
The following is shown:
* Report Generation Time
.PARAMETER SendMail
Send Mail after completion. Set to $True to enable. If enabled, -MailFrom, -MailTo, -MailServer are mandatory
.PARAMETER MailFrom
Email address to send from. Passed directly to Send-MailMessage as -From
.PARAMETER MailTo
Email address to send to. Passed directly to Send-MailMessage as -To
.PARAMETER MailServer
SMTP Mail server to attempt to send through. Passed directly to Send-MailMessage as -SmtpServer
.PARAMETER ScheduleAs
Attempt to schedule the command just executed for 10PM nightly. Specify the username here, schtasks (under the hood) will ask for a password later.
.EXAMPLE
Generate the HTML report
.\Enable-MailUsers.ps1 -SendMail -MailFrom [email protected] -MailTo [email protected] -MailServer ex1.contoso.com -ScheduleAs SvcAccount
#>
param(
[parameter(Position=0,Mandatory=$false,ValueFromPipeline=$false,HelpMessage='Send Mail ($True/$False)')][bool]$SendMail=$false,
[parameter(Position=1,Mandatory=$false,ValueFromPipeline=$false,HelpMessage='Mail From')][string]$MailFrom,
[parameter(Position=2,Mandatory=$false,ValueFromPipeline=$false,HelpMessage='Mail To')]$MailTo,
[parameter(Position=3,Mandatory=$false,ValueFromPipeline=$false,HelpMessage='Mail Server')][string]$MailServer,
[parameter(Position=4,Mandatory=$false,ValueFromPipeline=$false,HelpMessage='Schedule as user')][string]$ScheduleAs
# Sub Function to neatly update progress
function _UpProg1
param($PercentComplete,$Status,$Stage)
$TotalStages=5
Write-Progress -id 1 -activity "Mail enabled Objects" -status $Status -percentComplete (($PercentComplete/$TotalStages)+(1/$TotalStages*$Stage*100))
#Sub Function create ErrObject output
function _ErrObject{
Param($name,
$errStatus
If(!$err){
Write-Host "error detected"
$script:err = $True
$ErrObject = New-Object -TypeName PSObject
$Errobject | Add-Member -Name 'Name' -MemberType Noteproperty -Value $Name
$Errobject | Add-Member -Name 'Comment' -MemberType Noteproperty -Value $errStatus
$script:ErrOutput += $ErrObject
# 1. Initial Startup
# 1.0 Check Powershell Version
if ((Get-Host).Version.Major -eq 1)
throw "Powershell Version 1 not supported";
# 1.1 Check Exchange Management Shell, attempt to load
if (!(Get-Command Get-ExchangeServer -ErrorAction SilentlyContinue))
if (Test-Path "D:\Exchsrvr\bin\RemoteExchange.ps1")
. 'D:\Exchsrvr\bin\RemoteExchange.ps1'
Connect-ExchangeServer -auto
} elseif (Test-Path "D:\Exchsrvr\bin\Exchange.ps1") {
Add-PSSnapIn Microsoft.Exchange.Management.PowerShell.Admin
.'D:\Exchsrvr\bin\Exchange.ps1'
} else {
throw "Exchange Management Shell cannot be loaded"
# 1.2 Check if -SendMail parameter set and if so check -MailFrom, -MailTo and -MailServer are set
if ($SendMail)
if (!$MailFrom -or !$MailTo -or !$MailServer)
throw "If -SendMail specified, you must also specify -MailFrom, -MailTo and -MailServer"
# 1.3 Check Exchange Management Shell Version
if ((Get-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.Admin -ErrorAction SilentlyContinue))
$E2010 = $false;
if (Get-ExchangeServer | Where {$_.AdminDisplayVersion.Major -gt 14})
Write-Warning "Exchange 2010 or higher detected. You'll get better results if you run this script from an Exchange 2010/2013 management shell"
}else{
$E2010 = $true
$localserver = get-exchangeserver $Env:computername
$localversion = $localserver.admindisplayversion.major
if ($localversion -eq 15) { $E2013 = $true }
#Get date
$filedate = get-date -uformat "%m-%d-%Y"
$filedate = $filedate.ToString().Replace("0", "")
#Get the valid users that are not mail-enabled
_UpProg1 1 "Getting User List" 1
#$Users = Get-mailuser -ResultSize unlimited -OrganizationalUnit "R0018.COLLABORATION.ECS.HP.COM/Accounts/AbbVienet/Users" | ?{$_.legacyexchangeDN -eq ""}
$i = 0
$output = @()
$errOutput = @()
$err = $False
#2 Process users
ForEach ($User in $Users){
$i++
_UpProg1 ($i/$Users.Count*100) "Updating Recipients" 2
If ($user.ExternalEmailAddress -eq $null){
_ErrObject $user.Name, "Missing External Email Address"
ElseIf($user.DisplayName -NotLike "* "){
_ErrObject $user.Name, "DisplayName contains a trailing space"
ElseIf($user.DisplayName -NotLike "_*"){
_ErrObject $user.Name, "DisplayName contains a Leading space"
ElseIf($user.PrimarySmtpAddress -eq $null){
_ErrObject $user.Name, "Missing Primary SMTP address"
Else{
#Disable EmailAddressPolicy on these users
Set-Mailuser $User.Name -EmailAddressPolicyEnabled $false
#pass to Update-recipient
Update-Recipient $User.Name
$LEDN = Get-MailUser $User.Name | Select {$_.LegacyExchangeDN}
If ($LEDN -ne ""){
$object = New-Object -TypeName PSObject
$X500 = "x500:" + $LEDN.'$_.LegacyExchangeDN'
$object | Add-Member -Name 'Name' -MemberType Noteproperty -Value $User.Name
$object | Add-Member -Name 'x500' -MemberType Noteproperty -Value $X500
$output += $object
#Creating CSVFile Output
_UpProg1 99 "Outputting CSV file 3" 3
$CSVFile = "c:\scripts\Mail-enable\Mailenabled_$((Get-Date).ToString('MM-dd-yyyy_hh-mm-ss')).csv"
If($err){
$ErrCSVFile = "c:\scripts\Mail-enable\ProblemUsers_$((Get-Date).ToString('MM-dd-yyyy_hh-mm-ss')).csv"
$errOutput | Select-Object Name, Comment | ConvertTo-CSV -NoTypeInformation > $ErrCSVFIle
$Output | ConvertTo-Csv -NoTypeInformation > $CSVFile
if ($SendMail)
_UpProg1 95 "Sending mail message.." 4
If($err){
Send-MailMessage -Attachments $CSVFile,$ErrCSVFile -To $MailTo -From $MailFrom -Subject "Enable Mail Users Script" -BodyAsHtml $Output -SmtpServer $MailServer
Else{
Send-MailMessage -Attachments $CSVFile -To $MailTo -From $MailFrom -Subject "Enable Mail Users Script" -BodyAsHtml $Output -SmtpServer $MailServer
if ($ScheduleAs)
_UpProg1 99 "Attempting to Schedule Task.." 4
$dir=(split-path -parent $myinvocation.mycommand.definition)
$params=""
if ($SendMail)
$params+=' -SendMail:$true'
$params+=" -MailFrom:$MailFrom -MailTo:$MailTo -MailServer:$MailServer"
$task = "powershell -c \""pushd $dir; $($myinvocation.mycommand.definition) $params\"""
Write-Output "Attempting to schedule task as $($ScheduleAs)..."
Write-Output "Task to schedule: $($task)"
schtasks /Create /RU $ScheduleAs /RP /SC DAILY /ST 22:00 /TN "Enable Mail Users" /TR $task
The Problem is that when I look at the $errOutput I see things but when I pipe the $erroutput to convertTo-CSV I get this within the CSV file. I think its because I an calling a function to do the updating. But not sure.
Jeff CHi Jeff,
Any updates? If you have any other questions, please feel free to let me know.
A little clarification to the script:
function _ErrObject{
Param($name,
$errStatus
If(!$err){
Write-Host "error detected"
$script:err = $True
$ErrObject = New-Object -TypeName PSObject
$Errobject | Add-Member -Name 'Name' -MemberType Noteproperty -Value $Name
$Errobject | Add-Member -Name 'Comment' -MemberType Noteproperty -Value $errStatus
$script:ErrOutput += $ErrObject
$errOutput = @()
_ErrObject Name, "Missing External Email Address"
$errOutput
_ErrObject Name "Missing External Email Address"
$errOutput
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support -
It seems that my downloaded applications are locked.
my preloaded applications will open, but none of my purchased/downloaded applications will open.
can't delete, either; it's as if the screen is locked. any ideas?Reboot your iPad: Press and hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will restart. See if that solves your app issue.
-
It seems that my serial numbers are deactivated. what can I do?
After an installation issue, I contacted tech support and they told me to uninstall my elements 11 and reinstall. But now, my serial numbers both say invalid.
Which Elements... Photoshop or Premiere?
Either way, Elements is not part of the Cloud, so asking in their forums may give you better answers
http://forums.adobe.com/community/premiere_elements
http://forums.adobe.com/community/photoshop_elements -
When I first opened the email, it took forever to open. Then the pics didn't show up as pics, but as a ton of some kind of code. Since then, the app will open with just the frame, no info in the frame, no email accts or anything. Then it closes automatically after a few seconds.
I've closed the app and reopened it, rebooted the iPad, and gone online and deleted the email itself. But the app still won't open. Help, please!!Thank you. I tried the soft reboot again, and the home button has been working fine this whole time. I have tried deleting the email acct from the settings and the mail app still opens only empty frames. I have a screen shot of it, but don't know how to post it here to be able to show what exactly is happening.
The mail app will open. I can see the area that usually shows the messages themselves. I can also see the area that usually displays all the accts. Both these areas are completely blank. The search bar is showing on the left hand side, and up on the top right, the download button, reply, delete and compose buttons are showing. At the very bottom left the refresh button is showing. The app sits like that for about 20 seconds and then automatically closes. None of the buttons are responsive. I cannot see any of the email accounts I have in the app (3, usually but 2 at the moment since deleting the acct that seemed to have caused this problem).
I have force-stopped the app, shut down and restarted the iPad, and rebooted the iPad. None of these have helped.
Maybe you are looking for
-
How can I create a card with only a picture on the front - inside blank
How can I create a card that only has a picture on the front and the inside is blank?
-
Can't save query for fixed asset
I'm using sqvi query and logical database ADB, and fields comp code, asset number, subnumber, cost center, planned ord. depreciation, ordinary dep. posted in current year, i can't save, it says: global syntax check Error in parameter PA_PGSEL Stateme
-
Search element in array and convert to booblean and memorize this boolean
Hi, I have an array with X cells (variable).On the other hand I have a control string. I want search this control in the array. If I meet it, in the array, a LED will switch on. For example: cicle nº 1 Array Control a b
-
I'm working on a directory and need to apply a character style to certain areas in CS3. Is there a way to use a wild card to find "any word?" For example, I need to find the following and apply the style; name, tab, number, tab, any character, tab. H
-
Need to set the account ID twice for CampaignManagementService?
We're using GetCampaignsByAccountIdRequest to get the list of campaigns in an account. We found that we must set the account ID for the request to succeed: GetCampaignsByAccountIdRequest.setAccountId(AccountId); However, it seems it's also mandatory