Without giving any password it is getting connected in windows
in windowsfrom command prompt when i try to login to oracle it is asking for username but when i just press the enter key for password ( without giving any password) it is getting connected?
How do i stop it ?
Regards
Sudharshan
This is addressed in the following note:
Note: 77665.1 - WIN: OS Authentication - CONNECT AS SYSDBA Without a Password
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=77665.1
Similar Messages
-
Connect to remote target without giving SYSDBA password
Hi, I would want to script RMAN backup running from a Catalog Server using windows scheduled job which will backup target running in remote machine.
Is there a way I can connect to the target in remote machine without giving the password in the script?
Catalog server and target server are 11.2.0.3
-SriniHi, I created the wallet with UserA and now I want to put a scheduled job with a service account UserB but am not able to access the wallet.
Its Windows 2008 and I have explicitly added the UserB as Full permission for the wallet file. The error message is below
ORA-12578: TNS:wallet open failed
Am pretty sure its a permission issue - but not sure how to provide the permission. UserB is in Admin Group, ORA_DBA Group, can log-in a batch job .........
Any pointer greatly appreciated.
-Srini -
Installation of weblogic 6.1 suuenly aborts without giving any error
Hi
i am trying to install weblogic server 6.1 in the following configured machine:-500 Mhz
256 MB RAM 40 GB harddisk with WIN NT workstation as the operating system.The installation aborts without giving any error ?? please help..it extracts 100% and then aborts installation without any error
rishiHi.
Pls search the archives of this newsgroup. This has been reported several times and a few solutions have been found and posted here.
Thanks,
Michael
rishi wrote:
Hi
i am trying to install weblogic server 6.1 in the following configured machine:-500 Mhz
256 MB RAM 40 GB harddisk with WIN NT workstation as the operating system.The installation aborts without giving any error ?? please help..it extracts 100% and then aborts installation without any error
rishi--
Michael Young
Developer Relations Engineer
BEA Support -
I wana creat an apple I'd , but they are asking me for my credit card detail. How do i creat an apple I'd without giving any credit card detail
Read this knowledge base article for help with that.
-
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
Exporting parameter without giving any type in FM.
Hi all,
I have created a zcopy of function module DMEE_EXIT_TEMPLATE. In this FM there is a parameter I_ITEM which is not associated with any type. But In Zcopy of this FM I am unable to activate it without giving any type. I debusgged the standarad program but could not find any type for this component I_Item. But when I debug the standard program in which this FM is used I_Item fills with three structures (FPAYH,FPAYHX,FPAYP).
What should I do so that I could activate my FM.
Regards,
Azra.Just use the type ANY and activate it.
regards,
hans -
Remove log in password for user account connected to windows live
Hi, I had connected my windows live account to my local account, which is running windows 8.1
Now, it is asking me for Live password every-time I have to login to my windows. Is there any way to remove this password? I want to keep my Live account connected, but don't want to enter password every-time I want to login.
Thank you.Hi,
When you connect a local account to a Microsoft Account, then the logon password will also be changed to the password of your live account, this is unavoidable, but if you think that typing the password every time is too annoying, then we can use a PIN
instead, move the mouse to the right charm bar\Change PC settings\Accounts\Sign-in options, type four digit number as your password
We can also use autologon tool to automatically logon to the account after you start your machine, but please note that this might cause potential security issue because everyone who get the machine can have access to to your Microsoft Account.
https://technet.microsoft.com/en-us/sysinternals/bb963905.aspx
just download the tool, then configure as below, here, you need to type your live account as the username
Yolanda Zhu
TechNet Community Support -
When it hangs, I end up having to "force quit" the application. I can't simply wait it out. No commands seem to respond when it is hanging. I run it on OS X, with all of the most recent software updates. My laptop is a Macbook Pro, most recent iteration.'''bold text'''
When it hangs, I end up having to "force quit" the application. I can't simply wait it out. No commands seem to respond when it is hanging. I run it on OS X, with all of the most recent software updates. My laptop is a Macbook Pro, most recent iteration.'''bold text'''
-
How to recover IDSM-2 password (without know any password)
Hi,
We have a IDSM-2 system card in 6500 system. Unfortunately, we lost tracking the login/password. I have read Cisco doc# 13837. It req to know either admin username/password or service username/password to do password recovery. I do not have those info (and tried). The last method suggested is to re-image IDSM-2 (IOS). I am wondering there is a better way to recover password like other switch..(such as hold mode to reboot switch) without re-image. Here is the card info:
"WS-SVC-IDSM-2 8 ports Intrusion Detection System Rev. 6.1"
Any help would be greatly appreciated.
gyA "re-image" is necessary, but it is not a standard re-image.
Instead there is a special image file that ONLY sets the cisco password back to the default "cisco". It doesn't change anything else on the system.
Download the password recovery image file WS-SVC-IDSM2-K9-a-6.1-password-recovery.bin.gz from:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=6.1%281%29E1&mdfid=277997776&sftType=Intrusion+Prevention+System+%28IPS%29+System+Software&optPlat=&nodecount=29&edesignator=null&modelName=Cisco+Catalyst+6500+Series+Intrusion+Detection+System+%28IDSM-2%29+Services+Module&treeMdfId=268438162&modifmdfid=null&imname=&treeName=Security&hybrid=Y&imst=N
To "install" this special password recovery file you will follow the System Re-Image instructions, but use this special file instead of the standard System Image file.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_system_images.html#wp1031426
This is discussed very briefly in the CLI guide:
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_troubleshooting.html#wp1139735 -
Maxl Automation for sequential calc scripts - just stops without giving any error
Hi,
I was running an automation for calculations using MaxL. by scheduling the Steps.bat in the task scheduler of windows.
_________ Steps.bat ___________
StartMaxl Steps.mxl
_________ Steps.mxl ___________
Login .....
Sppol on to log.log
Execute calculation 'DB'.'DB'.StepA1; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA2; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA3; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA4; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA5; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA6; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA7; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepA8; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB1; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB2; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB3; Iferror 'StopError';
Execute calculation 'DB'.'DB'.StepB4; Iferror 'StopError';
define label 'StopError';
exit;
Not when I check the log file on execution it shows ...
___________________ Log.log _______________________
MAXL> execute calculation 'DB'.'DB'.'StepA1';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepA1.csc] : [173.87] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepA8';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepA8.csc] : [2000.00] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepB1';
OK/INFO - 1012579 - Total Calc Elapsed Time for [StepB1.csc] : [1200.00] seconds.
OK/INFO - 1013274 - Calculation executed.
MAXL> execute calculation 'DB'.'DB'.'StepB2';
If you see the last line - it just halts - doesn't show any error or any other message. And the task in the windows task scheduler keeps showing the task as running - without any error there as well.
Any ideas on why it is just going to a limbo (no sessions also appear on EAS console)
AnkurYes the script can be manually executed. Also if I again put a mxl file starting from the step where it last stopped - it continues execution normally. (i.e. executes StepB2 as well and continues executing)
And today's execution result - I kept monitoring the server, it ran for 3hrs and then halts after around 80% of the steps with 20% were still remaining. I created a new Mxl to start from the last 20% and it ran successfully again.
@Amarnath : Restart database ?
I checked the logs - and this is what I can see (modified the big fields to show what the logs are showing)
[Wed Oct 9 09:54:43 2013]Local/....... Ankur.....
Calculation executed
[Wed Oct 9 09:54:43 2013]Local/DB///47450147858752/Info(1013210)
User [Ankur.....@Native Directory] set active on database [DB]
[Wed Oct 9 09:54:43 2013]Local/DB/DB/Ankur......
Received Command [Calculate] from user [Ankur......@Native Directory]
[Wed Oct 9 09:54:43 2013]Local/DB/DB/Ankur......
Received Command [Calculate] from user [Ankur......@Native Directory] using [StepB2.csc]
[Wed Oct 9 10:24:59 2013]Local/DB///47341561242320/Info(1002035)
Starting Essbase Server - Application [DB]
[Wed Oct 9 10:24:59 2013]Local/DB///47341561242320/Info(1200480)
Loaded and initialized JVM module
[Wed Oct 9 10:24:59 2013]Local/DB//47341561242320/Info(1200445)
External [GLOBAL] function [@ESSBASEALERT] registered OK
[Wed Oct 9 10:25:01 2013]Local/DB//47341561242320/Info(1019008)
Reading Application Definition For [DB]
So indeed the essbase server is starting again - but why ?
Ankur -
SSIS Package execution completes without giving any success or failure message
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.Usually you will have a red object somewhere in your package if there was a failure. Make sure you are looking in both the Control Flow and all the Data Flows in the package for a red object. In the execution results in the far right tab, usually you will see several warning messages somewhere in the list of steps, followed by a message that says you have exceded the number of errors for the package and that it is failing. This is not at the bottom but where the errors actually occur in the flow of messages.
I don't know if that helps, but that is about all I can add. Good luck. -
Weblogic admin server is unable to start (without giving any error)
Hi,
We have a disaster recovery machine which is created from production machine by file replication (SAN disks are used). We are still trying to make the DR domain up. Our problem is, after starting the script
startAdmin.sh, java process stops after log line containing "Initializing self-tuning thread pool". There is no process left when i grep in unix env. The out log give no error (admin.log server log is not created yet).
The only i have is the out log.
Could anybody help on resolving this problem ? Thanks very much in advance !
Here is all the admin.out log :
JAVA Memory arguments: -Xms1024m -Xmx1024m -XXnoSystemGC -Xverbose:memory,gcreport,gcpause -Xverbosetimestamp -Xverboselog:servers/asb_admin/logs/asb_admin_gc.log
WLS Start Mode=Production
CLASSPATH=/global/commonproduct/asb_prod/lib/log4j-1.2.15.jar:/product/osb/osb_10.3/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_cie670/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_alsb1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/jdk/lib/tools.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic_sp.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic.jar:/product/osb/osb_10.3/modules/features/weblogic.server.modules_10.3.0.0.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/webservices.jar:/product/osb/osb_10.3/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/product/osb/osb_10.3/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/product/osb/osb_10.3/wlserver_10.3/../modules/features/osb.server.modules_10.3.0.0.jar:/product/osb/osb_10.3/osb_10.3/lib/flow/sb-flow.jar:/product/osb/osb_10.3/wlserver_10.3/../modules/com.bea.core.jaxen_1.0.0.0_1-1-1.jar:/product/osb/osb_10.3/osb_10.3/lib/version.jar:/product/osb/osb_10.3/osb_10.3/lib/alsb.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-ant.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-common.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-core.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-dameon.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/classes:/product/osb/osb_10.3/wlserver_10.3/../modules/com.bea.core.apache.commons.logging_1.1.0.jar:/product/osb/osb_10.3/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/xqrl.jar::
PATH=/product/osb/osb_10.3/wlserver_10.3/server/bin:/product/osb/osb_10.3/modules/org.apache.ant_1.6.5/bin:/product/osb/osb_10.3/jdk/jre/bin:/product/osb/osb_10.3/jdk/bin:/usr/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-solaris-sparcv9, compiled mode)
Starting WLS with line:
/product/osb/osb_10.3/jdk/bin/java -jrockit -Xms1024m -Xmx1024m -XXnoSystemGC -Xverbose:memory,gcreport,gcpause -Xverbosetimestamp -Xverboselog:servers/asb_admin/logs/asb_admin_gc.log -da -Dplatform.home=/product/osb/osb_10.3/wlserver_10.3 -Dwls.home=/product/osb/osb_10.3/wlserver_10.3/server -Dweblogic.home=/product/osb/osb_10.3/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/product/osb/osb_10.3/patch_wlw1030/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_wls1030/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_cie670/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_alsb1030/profiles/default/sysext_manifest_classpath -Dweblogic.Name=asb_admin -Djava.security.policy=/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic.policy weblogic.Server
<Dec 13, 2012 11:12:00 AM EET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/global/commonproduct/asb_prod/lib/log4j-1.2.15.jar>
<Dec 13, 2012 11:12:01 AM EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.2-7-148152-1.6.0_29-20111221-2104-solaris-sparcv9 from Oracle Corporation>
<Dec 13, 2012 11:12:01 AM EET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 8422724, 8715553 Mon Aug 10 18:21:10 EDT 2009
WebLogic Server Temporary Patch for 8160383, CR368242 Sat Oct 10 00:30:19 CDT 2009
WebLogic Server Temporary Patch for bug8186281 Mon Sep 20 08:23:54 PDT 2010
WebLogic Server Temporary Patch for 9089055 Sun Jan 24 19:23:51 IST 2010
WebLogic Server Temporary Patch for CR364493, 8066979 Thu May 21 11:35:42 CDT 2009
WebLogic Server Temporary Patch for CR383039 Fri Dec 19 15:28:07 PST 2008
WebLogic Server Temporary Patch for 8638391 Mon Jul 27 14:49:39 PDT 2009
WebLogic Server Temporary Patch for CR381056 Mon Oct 06 10:48:50 EDT 2008
WebLogic Server Temporary Patch for CR374413, CR378680 Tue Sep 02 09:55:36 PDT 2008
WebLogic Server Temporary Patch for CR378102 Wed Sep 10 23:28:48 PDT 2008
WebLogic Server Temporary Patch for CR378741 Tue Sep 09 13:08:51 PDT 2008
WebLogic Server Temporary Patch for CR378781, CR380313 Fri Sep 19 13:34:16 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Dec 13, 2012 11:12:06 AM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 13, 2012 11:12:06 AM EET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>Hi,
Try to set the following value under setDomainEnv.sh file.
JAVA_OPTIONS="${JAVA_OPTIONS} -Djava.security.egd=file:///dev/urandom"
this will solve your startup problem.
Regards,
Kal -
Please help me out and give me best solution to this weird problem
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
Re: Skype charged me without giving any service
shantonu_eco wrote:
It was two months ago.......................
Hello,
You have been flagged for multiple duplicate posting. Please note that this is prohibited and your duplicates have been deleted. Your future compliance will be appreciated.
Assuming you followed directions correctly your query is the result of a minor error and will be quickly resolved as indicated above.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.khawaja423 wrote:
I want to get services for three months for what I paid.
Hello and welcome to the Skype Community.
Please explain your issue so we can assist you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
My battery is not staying for more hours it suddenly gets switch off without giving warning
My battery is not staying for more hours . It suddenly getting switch off without giving any warning. My iPhone is iPhone 4s
Wen I can receive reply from apple management .
Maybe you are looking for
-
Can I keep photos on external hard drive and still use iPhoto?
I have virtually no space left on my eMac's 80GB hard drive. For a long time, I have kept my sizable iTunes library on an external hard drive connected to the eMac. It takes a bit of extra time to open up the iTunes library and to upload music from n
-
Where is my refresh button on the toolbar? Why change the right-click options order? Are you trying to be Apple? WTF?? Please help me get back to the latest version of Firefox 3. I would really appreciate that. Sorry to be such a dick, but this new s
-
Airplay between iPad and MacBook Pro
I am trying to reflect my iPad to my MacBook Pro. I have the 3rd Generation and I am running OS 10.8.2. When I try to connect using Reflector, I get "an error (-6722) while connecting to the AirPlay device "Sandy's MacBook Pro"". What do I need to do
-
Problem with "take a snapshot"
Hello All, I have a problem with the function "Take a snapshot" My snapshots are blurred, whatever the percentage of the page. It is a big problem for me when a try to take a pic for my presentation. What can I do? Could you help me ? Thanks a lot Em
-
Application server http server (webpage)error
hi, i am tryping to access the localhost.localdomain:com:7777/oiddas. but i am getting page not found error. please let me know how to troubleshoot this. Thanks, Satish.