Without release schedule agreement schedule lines should not be maintain

Hi experts,
       i made a schedule agreement and i have given 2 level of releases for it.. so with out releasing i maintained schedule lines in me38, then i made migo then system says the document has not been released yet. but what my query is schedule lines should not be happened with out release means it should stop here only. So how to give check for it.i have searched in system messages but nothing is there in that. So please solve this problem its urgent.

Hello,
I have the same problem as you. Someone know something about it?
kanyadhara, did yo solve this problem?
Thanks a lot

Similar Messages

  • Schedule lines should not be maintained with out release

    schedule lines should not be maintained with out release of schedule agreement......but system accepting to maintain the schedule lines.Please say how.
    regards,
    Sridhar kumar.a

    Hello,
    I have the same problem as you. Someone know something about it?
    kanyadhara, did yo solve this problem?
    Thanks a lot

  • Schedule line should not generate until SA release

    Dear All,
    We want when we run MRP against schedule agreement then "Schedule line should not generate until SA release"
    Abhinay

    HI Abhinay Sachan ,
    Bascially when we run the MRP the system generate the Schedule Lines for that  schedule line we are doing release .....
    If you have SA for a particular materail system gives the Error or warrning message based on the setting what we made...if it is error sysetm won't allow other wise it is warrning meaasge means we can cretae the PR for the particular materail i hope i wll help you
    Regards
    Murugan J

  • How to Change Scheduling Agreement Schedule line data thru BAPI ??

    Hii
           I want to change the shedule line data for a scheduling agreement .
    I used BAPI_PO_CHANGE but as this BAPI is used for PO only this gives a
    Error Message for Scheduling agreement .
    Please suggest me BAPI or FM to update the Scheduling agreement Schedule line.
    Regards
    Ajitabh Pradhhan

    as BAPI_AGREEMENT_MAINTAIN is not available in 4.6c
    Please help me out on hwo to maintain Scheduling Agreements .
    Regards
    Gaurav

  • PO & Scheduling Agreement Schedule Lines

    Please help me out with this questions below:-
    1. What is the use of Scheduling Agreement Schedule Lines in PO.
    2. What is the use of  Reservation/dependent requirements in PO.
    3.When does EKET & RSEB table update at the time of Po crration.
    4.Where is the Reservations Number gets reflect in PO.
    Thnx,
    Viru.

    Hi Verandra,
    1. What is the use of Scheduling Agreement Schedule Lines in PO.
    Delivery schedule (Schedule lines) are the extrenal document which u will send to vendor to supply the items accordingly.
    PO is not required for Schedule agrement.
    2. What is the use of Reservation/dependent requirements in PO.
    Reservation the the formal requst to stores / WH person to issue (plan to) the materila
    3.When does EKET & RSEB table update at the time of Po crration.
    this wont update at the time of PO cration
    EKET :Scheduling Agreement Schedule Lines --- while u r creating the Schedule line
    RSEG: Document Item: Incoming Invoice -- While in Invoice verificatjon.
    RSEB ... no table availale
    4.Where is the Reservations Number gets reflect in PO.
    Reservation number will be used for Inventory management ( GR & GI)
    Regards
    Anand

  • Adding schedule agreement & schedule lines in one out put

    Hi Friends,
    Can we add schedule agreement & schedule lines in one out put. What settings to be done. I am using document type as LP.
    I am in ECC 5.0 version.
    Regards

    Hi,
    In std there is no possible .But still we can develop a Z- programme with the help of ABAP Person if you explanin the logic they will develop the same
    Regards
    Murugan J

  • Scheduling Agreement -Schedule line should not pass the requirement to MRP

    Hi Friends!
    As we all know the scheduling agreements is outline agreement with future schedule lines, with this system will  pass the requirements to MRP for the schedule line which is even after 5 years, so my requirement is  if the schedule line date is above 15 days from the current date then requirement should not pass to MRP. 
    solution which we gave is, SA initially will determine the schedule line category as  CN (which will not transfer the requirement) and  a batch job program will run daily and it will check for each schedule line if any of the schedule is with in the 15 days from the current date then it will change the schedule line category from CN to CP. 
    Now the problem is , by using Batch Job which program I have to call to change the schedule line category?????
    1. we tried BAPI_SALESORDER_CHANGE but when we are changing the CN to CP it is not performing ATP where as if we do manually it is performing.
    2. we tried BDC but here also we facing some strange problem i.e. while recording the ATP screen is not populating where it is coming while doing manual.
    Can someone let me know which one program we should call in Batch job to do this change.
    Regards
    Nath

    Hi nath,
    i also failed in changing shedule line category in userexit and in BAPI.
    in one case, i succeded in doing it with a bdc after MV45AFZZ / userexit_save just bevore the datas are reset but after the commit-work is processed.
    the other possibility is, to change the accepted amount in userexit RV03VFZZ / USEREXIT_AVAILABILITY_OUT.
    3. possibility is, to block the order with a delivery - block , same as the credit-control-block. This block can be set in MV45AFZZ or perhaps in BAPI too.
    hans

  • Schedule lines should not change 3 weeks time from MRP date

    Hi
    Is there any specific customisation required to get following results in case of schedule lines.
    1) MRP should not change/adjust the already send delivery schedule lines  which are lying within 3 weeks time from MRP date
    2) System should not allow to book the GRN unless the messages / print out has been generated from the system in case of scheduling agreement.
    Thanking you
    Shantakumar
    09944009752

    Hi,
    There are 2 possibilities:
         1. use MRP fixing using planning time fences, this is done by putting the relevant settings in the MRP1 view of the material master
         2. use the firming options of the scheduling agreement, these are set per material number that is entered in the scheduling agreement.
    The GR can only be posted for schedule lines that have been processed aka output generated.
    Regards,

  • In ME38 If (EKET-MENGE) (EKPO-KTMNG)Schedule lines should not be created

    Hi,
    Our Requirement is in ME38 which is for creting Schdule line Agrement the system should not allow to create schedule lines
    if the Total of Schedule Line Quantity > Total Scheduled Quantity
              (Sum of all EKET-MENGE) > (EKPO-KTMNG)
    Can anybody give me the right User Exit,BADI for this Requirement and Coding for this

    Hello,
    I have the same problem as you. Someone know something about it?
    kanyadhara, did yo solve this problem?
    Thanks a lot

  • Change in scheduling agreement schedule lines .

    Dear All ,
            We have activated release strategy for scheduling agreement .Previously while maintaining schedule lines it was not going for release .
             But now while maintaining schedule lines in ME38 it is going for release .I want to know what is the reason and I want to stop this .
             We have made some changes in Closed PO amendment ,like we have changed the release indicator value R -6- 10% to R - 6 -0% .
    Like whenever we make change in price of a PO even a 1paise
    it should go for release .
              The release strategy for SA and PO is same .

    Hi,
    Since you have changed the release indicator it is again going for release for any change.
    Please change the release indicator to 2 from  6 so that you can change the schdeule lines or any modiifcation again release will not set
    Please check the release indicator in P.O and SA
    G.Ganesh Kuamr

  • EDI Message for Scheduling Agreement Schedule Lines

    Hi Experts,
    My client has the EDI set up for the SASL and is running fine.
    Currently we have scheduled background program to trigger the IDOC and convert the IDOC into XML to send the information to the external system via interface after MRP run.Output type in the SASL will be triggered at header level (Without release documentation) whenever there is a new or change in the schedule line. Schedule line will be fixed automatically for every MRP run based on the Firm zone maintained in scheduling agreement.
    Now the requirement is, Client wants to send the schedule lines regardless of New or change after MRP run sothat all the information will be sent to the suppliers. This requirement may be contradictory one but the client needs it.
    1) For the New schedule line creation the output type will be triggered so no issues the program will take care
    2) For the change schedule line also the output type will be triggered so No problem.
    Requirement :
    1) When there is no new & change in the schedule lines , how we can handle this???
    2) Client wants to fix the schedule lines based on the planned delivery time and they do not want to maintain this PDT in the Firm zone field.??
    Kindle explore and provide me the inputs. Appreciate your help.
    Thanks /Karthik

    Can you elaborate bit more on the issue.
    see if you are not mentioning the PDT in the firm zone field. then it means the schedule lines can be changed and once they are changed the change idoc will get trigger.
    however if there is no change in the schedule line and since its a old one there will not be any idoc generation for this.
    seems as per your requirement you want to get the idoc generated for the old line as welll then u need to look for the anhancement badi/uer exit to map this.
    need more insight of the issue to resolve it

  • GR for scheduling agreement schedule lines

    Dear All,
    I have created a scheduling agreement with release. The FRC and JIT delivery schedules are created and transnmitted to vendor.
    I am not able to make GR for the first delivery schedule line. If I give the ref. as the schedulinjg agreement in GR, System gives a message " document XYZ does not cantain any selectable items"
    Message no. M7064
    Regards.
    Milind Dugade

    Hi Madhura,
    I checked all the parameters and found that the delivery date in schedule is 21.11.2008. I tried to post Gr with posting date as 21.11.2008, but the system is giving the message "Document 5500000138   does not contain any selectable items"
    I had already checked the schedule is released and transmitted to vendor. The status is green agaist that scedule.
    Regards and Thanks
    Milind Dugade

  • Scheduling Agreement Schedule Lines firmed after outbound delivery

    Dear All,
    We use scheduling agreement for cross-company process in our client.  After MRP run schedule lines created automatically. For the next step outbound delivery is created via VL10F (or VL10B).
    After outbound delivery creation, on MD04 or ME39, i see the schedule line firmed (*). Because firmig MRP doesn't change those schedule lines. This is a problem for our client.
    Do you know a way for MRP can change the schedule lines even outbound delivery created ? How can i manage this situation ?
    Best regards,

    Hi Anil
    The '*' that you see means that the schedule line has been changed manually and the Firming indicator (EKET-FIXKZ) is set when there is any change to the Schedule line.
    So, when a Delivery is created, the schedule line should be 'Fixed'.
    Otheriwse, MRP can delete or change this schedule line and it would cause an inconsistency in the system. This is the logically intended behaviour.
    Please see the F1 help for the field EKET-FIXKZ:
    "Schedule Line is "Fixed"
    Fixes the schedule line and determines that it cannot now be automatically changed as a result of materials planning and control/MRP activities.
    Procedure
    The indicator is set automatically if:
    .- You make manual changes to a line of a scheduling agreement delivery schedule that was created via the materials planning process
    .- You create a schedule line manually
    Dependencies
    You can specify whether Materials Planning/MRP can change delivery schedule lines within the firm and trade-off zones in the additional data for the scheduling agreement item."
    I hope this helps.
    Anna

  • Scheduling agreement qty requirement is not considered in V_V2

    Hi Friends,
    We are facing a problem in rescheduling transaction V_V2.  System is not considering the requirement of the confirmed schedule lines of the scheduling agreement while carrying out the ATP in V_V2 and the available qty is allocated to the sales orders.
    Ex: Available Stock : 1000 EA
    1. SA confirmed Qty: 1000
    2. Sales order created for the qty of 1000, system is considering the SA requirement and confirming the SO based on RLT.
    3. When we run ATP in sales order change, system is still considering the SA requirement and not changing the confirmed date.
    4. But when we run the V_V2, system is ignoring the SA and confirming the SO line item with PULL-IN.
    Because of this SO is stealing the stock reserved for the SA. Is there a way to change the behavior of V_V2 similar to VA02, which considers the SA requirement / confirmed qty while rescheduling.
    Thanks,
    Ram

    Hi Ram,
    Rescheduling of sales documents is item specific. It is not possible to reschedule individual schedule lines of scheduling
    agreements. Each schedule line is displayed but only the open quantity can be rescheduled.
    You can find further information in SDV03V02 documentation.
    The open qty on item level will be checked becasue rescheduling of sales documents (scheduling agreements) is item specific.
    Availability Check in Rescheduling is always on item-level.
    Thanks and best regards,
    Smile

  • LZM Scheduling agreement: delivered lines still generate requirement in MRP

    Hi all,
    The problem I have is simple:
    - schedule agreement for finished goods of type LZM
    - the forecast lines are not updated daily and sometimes we can still have forecast lines for which deliveries were already performed
    Those lines are still present in MD04 - how can we get rid of those past requirements that are already 'satisfied'?
    If any other details are needed, please let me know.
    Thank you,
    H.

    Hi Shiva,
    and thank you for your prompt answer.
    I do not suspect that there is some error and running the correction program will solve it but this is the normal behaviour of the system given its actual configuration. Something has to be changed in the configuration of the system or some basic data are not properly maintained...
    Regards,
    Horatiu
    P.S. I made a run of SDRQCR21, no change.

Maybe you are looking for