Without selection screen

Hi All,
In myalv report program zreport when i click on particular fields it calls the standard report 's_ahr_61015512' which is done by bdc program .
when i say back in 's_ahr_61015512' report it is again coming to 's_ahr_61015512' report's selection screen i want't to skip that selection-screen what can i do?.

hi
Try creating a parameter transaction. Be sure to select 'Skip first screen'. And fill in the defaults for the selection screen.
chk this link:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d921f74b8a11d1894c0000e8323c4f/frameset.htm
regards
Satish

Similar Messages

How to create a variant for a program without selection screen

Hi All,
I've created one program which takes the data from 30 tables and loads into one final table.
This program is already moved to Production.
But while creating variant it's not allowing, since the program doesn't have the selection screen.
Is there anyway where I can create a variant in production without selection screen directly as the program code is already moved to production.
Thank You,
Regards,
Karthik.Ch

Hi ,
Are you running this program in a process chain??

Run alv report without selection screen in background

Hello Every body,
i programmed a ALV Report without selection screen, and i want to create a job for this alv report.
Any help?
Thank u.
Ouail.

Hi Steve,
Can you tell me where i have to put your code?
this is my abap code:
START-OF-SELECTION.
   p_filref = '\\SAPSERVER\f\SAFT\ivat\FI_Extract_1000_20140709_102346_910.XML'.
   PERFORM copy_from_xml_to_itab TABLES it_ref_file
                                 ref_xml_data
                                 USING p_filref.
**Begin Extraction File
   SUBMIT ZZ_FI_IVAT_EXTRACTOR
   WITH p_bukrs EQ '1000'
   WITH p_gjahr EQ '1998'
   WITH filepath EQ '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
   WITH cldata eq space
   AND RETURN.
   DATA: FILE_TABLE TYPE TABLE OF SDOKPATH,
   DIR_TABLE TYPE TABLE OF SDOKPATH.
   CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
     EXPORTING
       DIRECTORY = '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
       FILTER     = '*.*'
     TABLES
       FILE_TABLE = FILE_TABLE
       DIR_TABLE = DIR_TABLE
     EXCEPTIONS
       CNTL_ERROR = 1
       OTHERS     = 2.
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
   "get file name
   LOOP AT FILE_TABLE INTO p_filref.
   ENDLOOP.
   CONCATENATE '\\SAPSERVER\f\SAFT\iVAT_Extractie\' p_filref INTO path.
   PERFORM copy_from_xml_to_itab TABLES t_ext_file
                                 ext_xml_data
                                 USING path.
   PERFORM fill_xml_tab_in .
   perform build_fieldcatalog.
   PERFORM compare_data_ref_ext.
   PERFORM send_email.
   perform display_alv_report.
   PERFORM delete_extraction_file.
in the perform copy_from_xml_to_itab TABLES it_ref_file......, i use this code:
   CREATE OBJECT gcl_xml.
*Upload XML File
   CALL METHOD gcl_xml->import_from_file
     EXPORTING
       filename = p_filref
     RECEIVING
       retcode = gv_subrc.
   IF gv_subrc = 0.
     CALL METHOD gcl_xml->render_2_xstring
       IMPORTING
         retcode = gv_subrc
         stream = gv_xml_string
         size    = gv_size.
     IF gv_subrc = 0.
       REFRESH gt_xml_data[].
* Convert XML to internal table
       CALL FUNCTION 'SMUM_XML_PARSE'
         EXPORTING
           xml_input = gv_xml_string
         TABLES
           xml_table = gt_xml_data
           return    = gt_return.
     ENDIF.
   ENDIF.

Without selection screen how can we featch the file.

Hi all,
     without selection screen(parameter,select-options iam not using these both.) how can we featch the flat file what ever it may be (file format is xls.textor any thing) how ot do...plz it's urgent for me.
Regards,
Krishna,

Hi varun,
this is my sample code.here we are geting selection screen.without selection screen hoe to get file from out internal table.
plz gothrough this code and replay to me varun.
tables:pa0002.
type-pools:truxs.
*data:W_TRUXS_T_TEXT_DATA TYPE TRUXS_T_TEXT_DATA ,
     it_p0001 type standard table of pa0001.
TYPES: BEGIN OF it_p0002,
        pernr like pa0002-pernr,
        nachn like pa0002-nachn,
        vorna like pa0002-vorna,
       end of it_p0002.
DATA: t_p0002 type standard table of it_p0002,
      wa_p0002 type It_p0002.
DATA: it_raw TYPE truxs_t_text_data.
SELECTION-SCREEN BEGIN OF BLOCK S_BLK WITH FRAME TITLE TEXT-000.
parameters: P_EXCEL   TYPE RLGRAP-FILENAME.
SELECTION-SCREEN end OF BLOCK S_BLK.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_EXCEL.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
   FIELD_NAME          = 'P_EXCEL'
IMPORTING
   FILE_NAME           = P_EXCEL .
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
   I_LINE_HEADER              = 'X'
    I_TAB_RAW_DATA             = it_raw
    I_FILENAME                 = p_excel
TABLES
    I_TAB_CONVERTED_DATA       = t_p0002[]
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
    loop at t_p0002 into wa_p0002.
       write:/ wa_p0002-pernr,
               wa_p0002-nachn,
               wa_p0002-vorna.
    endloop.

Working with LDB without selection screen

can' we take input through file without any selection screen when we are working with LDB?
Please focus on this.
Regards
vamsi.

Hi,
yes, u can make use of :
SET PARAMETER ID command.
SET PARAMETER ID pid FIELD dobj.
Effect:
This statement sets the content of the SPA/GPA parameter specified in pid to the content of the data object dobj. For pid, a flat character-type field is expected that can contain a maximum of 20 characters, which cannot be exclusively blank characters. pid is case-sensitive. For dobj, a flat, (as of release 6.10 character-type) field is expected, whose binary content is transferred in an unconverted format.
If the SPA/GPA parameter specified for the current user in pid does not yet exist in the SAP memory, it is created. If the SPA/GPA parameter has already been created for the current user, its value is overwritten.
In a program, SPA/GPA parameters can only be created or assigned values if a name exists for them in the table TPARA. The extended program check reports an error if it can statically determine that a name specified in pid is not contained in the database table TPARA. ist.

Creation of spool request for a report without selection-screen.

Hi Experts ,
I need to create a spool request for ALV Grid report which is not having any selection-screen , after pressing F8 it will directly display the ALV Grid out put.
Can any one help me how to run the above report in background which is not having selection-screen?
Thank you & Regards.
Rajasekhar.P

HI,
At transaction SE38 click Program -> Execute -> Background.
Regards
Sudheer

Is it possible to create a variant without selection screen

Hi,
I would like to create a variant for a report(Standard report). It does not have selection screen. Could someone tell me is it possible to creste a varaint for it?
Is it possible to create a variant w/o selection screen? if yes, how?

If some SELECT-OPTIONS are hidden or NO-DISPLAY, you should be able to create a variant for the report.
Rob

Execute transction without selection screen

Hi,
I've created a transaction in SE93 and i use it with a variant for the selection screen. When i run the transaction, the selection screen is displayed and the values of my variant are setted into the fields.
I don't want to display the selection screen, I want to skip it and display directly the first dynpro of my program.
Does someone know how to do it ?
Thanks

Hi,
Instead of creating 2 transactions and creating a program to call the original transaction. I would suggest you create a program write a *SUBMIT USING SELECTION-SET vari *
So create just one original transaction which will call the program created above which will intrun submit the original program.
Program A is original with all the selection screen.
Create a variant for this program
Program B
Submit 'A' using selection-set vari.
Create T-code ZABC for program B.
regards,
Advait
Edited by: Advait Gode on Feb 2, 2009 3:02 PM

Variants without Selection Screen

Hi,
if i have a normal Dynpro Screen, and no selection screen, how can i then use the Variants of SAP? I found some FM like RS_CREATE_VARIANT but this does not work. The coding of these Variant helpers always try to read out the fields from the report. But my report has no fields, because it is a dynpro screen and no selection screen.
Do you know if i can use variants for dynpros?
Thanks

Hi Johnny,
You can create Transaction Variants using SHD0 transaction.
Have a look at the below SAP link:-
[Transaction Variants and Screen Variants |http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/7bc3895d1111d295ad0000e82de14a/frameset.htm]
Also Have a look at the below wiki :-
[Creating variants for custom screens|Creating variants for custom screens;
<removed by moderator>
Regards
Abhii
Edited by: Thomas Zloch on Sep 1, 2010 5:56 PM - please leave this to the original poster

Submit Program without Selection-Screen

Hi,
    I am submitting the SAP Standard program, which contains selections screen.
    i am passing values to standard program using via-selection screen.
    Is there any way to suppress / skip the selection-screen what is appearing after submit
Thanks
Uma

Hi,
use like this...
call transacton 'Tcode' and skip first screen.
Regards
kiran

How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

Navigational attribute in selection screen gives no applicable data

Hi Gurus
In the report i am using the navigational attribute in the selection screen.e.g Brand (attribute of material)
My problem is whenevr i enter value in the navigational attribute (brand) in the selection screen and execute its says no data found.
If i do not fill this parameter and fill only the parent attribute (material) in the selection screen , then i can see the results and from its properties (drilling down )i can see the values of brand .
If the values of brand exist why via selection screen its not giving vales, However Via material i can drill down and see brand values.
I have done all the necessary steps to make this attribute as navigational.
On top of this i have this same navigation attributes as one of the characterisitc in the cube.
Thanks
DD

Hello,
I've the same problem... for new nav. attributes for 0Material.
Settings for nav. attibutes in BEx Q.D. are OK.
But in BEx Analyzer:
1- not display all values for this attributes. Some values are displayed, some don't.
I try display it with and without selection screen. The result is the same.
2- I try to display (normal) attributes - not nav. In this case everything is OK.
But I've 2 columns: normal attribute for all values and nav. attribute only with some values...
(the query is something like: 0Material + 0Material_NOTnav_attr + 0Material_NOTnav_attr)
It isn't a normal...
I don't know... Maybe it's depend of the time?
I can't clear all master data for 0Material, because they're used in some cubes. I had old characteristic without nav. attr. but with master data. I added nav. attr. in 0Material and activated it. Next I load master data (full method). Then I added nav. attr. in infocube, activated it, delete and load data into the cube (Init + Delta).
If I display data for the cube in RSA1, I can see nav. attr. for all records. I can't see it in BEx Analyzer...
Can U explain it?
Thx,
MSzN

Selection screen display after role menu selection

Hi,
I have strange situation:
- running a query on the WEB from Query Designer 3.5 first display a selection screen and then the data - what is OK or expected
- but we created an application in WAD with just role menu - if we pick the same query, from the same role - the query is displayed without selection screen. After that the variable screen can be displayed, but we needed before the query is actually displayed (some variable are filled with user exit on selection screen, ...)
Any idea?
Thanks,
Tomaz

Tomaz,
Have you checked the webtemplate properties in WAD where you can check - force selection screen display?
Bob

How to skip selection screen ?

hi,
i have a problem:
i an abap i have an selection screen with lets say 10 fields.
how can i avoid that this selection screen is displayed ? i want to do the 'execute' (F8) autmaticly with prefilled values.
But not for every user, only for a special variant of the report .
how can i handle this ?
reg, Martin

Hi,
You can do this thing in 2 steps
1. Create a transaction for your report program
2. Write a new program in which you will check for the user names
if the user executing the program comes in the category where you need to directly go without selection screen then you can use the SUBMIT statement, if the user is not in that category then call the transaction which you have created and it will show you the selection screen.
Regards,
Pramod

Is there a way to use 'GET PERNR' without the selection screens?

I would like to use the GET PERNR event in a batch program without using the default selection screens. I would like to be able to use my own selection screen and parameters, but only get them along with the default selection options for payroll period. I've tried removing the screen number from the attributes screen, but still get these options. Is this possible?

hi Kiran,
report Category is a Pushbutton on the Attributes popup, it only appears if you use PNP logical DB.
this is from SAPHelp: "Report Category
Category used for HR reports that use the PNP logical database. It controls the type and number of fields that appear on the selection screen of an evaluation report."
hope this helps
ec

Without selection screen

Similar Messages

Maybe you are looking for