Without using ID file to idoc scenario

Hi People
I am trying one scenario(file to IDoc) that is without using configuration only using IR only is it possible to create? and how
Thanks & regards
shekar

Hi,
some scenarios could be done without IR:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
But I guess it's not possible to realize a scenario without ID.
For example where do you want to configure you File Adapter?
Regards
Patrick
Edited by: Patrick Koehnen on May 21, 2008 1:31 PM

Similar Messages

Fault message type using in File to IDoc Scenario

Hi,
I have successfully configured File to IDoc scenario. Now I am thinking to add some flavour to it by using Fault message type.
Can I use fault message type without using any proxies?
Can some body help in giving an answer to my question and provide some weblogs to achieve the configuration?
Thanks in advance.
Suraj Kumar

Hi Suraj,
With IDOCs, you cannot set up fault messages as it is async mode communication. There is not control which waits for the processing of the message/application errors as you have it in case of synch mode.
But, you can set up acknowledgement using ALEAUD. Check this for more /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
praveen

Message Split -- File to Idoc Scenario - ( Without BPM )

I have multiple records coming to XI in a File and I have to create Multiple Idocs to R/3.
Due to Complexity of mapping I'm splitting Maaping step into 2 message Mappings.
A-->B
B-->C
In the 2nd Mapping step I'm doing message Split meaning for each Source record I'm creating multiple Idocs ( To be precise each record on the source becomes 4 idocs in the Target.
2nd Mapping step is as follows
Source 1..1
Sourcerecord 0.. Unbounded
    field1 0..1
    field2 0..1
    filed3 0..1
Target
Message 1
    Idoc   1.. Unbounded
      Idoc Structure..
Message 2
      Idoc   1.. Unbounded
Message 3
      Idoc   1.. Unbounded
Message 4
      Idoc   1.. Unbounded
So based on some criteria each record of Source will be mapped to 4 Messages ( 1 each under each Message )
Is it possible to do this without BPM?. Iam sending all these Idocs to same R/3 System.
Thanks for any help..RK

Hi,
See the blog
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
<i>Basicly we have 2 ways of handling such scenarios:
- we can use a block step and send multiple IDOCs from our BPM
- we can also do a little trick and send multiple IDOCs from the XI without a BPM
The first approach is a standard XI approach. It involves the use of a BPM
so the speed of this transfer many not be very good in case you'd like to send
hundreds or thousands of IDOCs in just one call.
The second approach uses a little trick that was mentioned several times
on the XI Froum by a number of XI developers but is still not very clear to the XI newbies.
It allows us to send multiple IDOCs without the use of a BPM. Most probably this will be your choice
if you'd like to use such 1:N (IDOCs) scenarios effectively.</i>
Please see the bwlow threads also..
IDOC Splitting
File To IDOC Thru XI
Multi-Mappings in BPM (XI 3.0)
Please let me know , your prob..is solcev or not..
Regards
Chilla..

File to IDOC scenario using FTP server

Dear Experts,
I'm getting IDOCs in the form of .TXT file from sender side and at reciever end we have IDOC. We are using FTP connection at sender.
I want to know:
1. Is FCC the only solution to integrate with PI or do we have any other option also?
2. What all the things I need to care in designing and configuration?
Thanks a lot.

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

File to IDOC Scenario using BPM

Hi Experts,
    I am working on file-Bapi-Idoc scenario using BPM.
    I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
Praveen

Hey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
    transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
    trigger an Execption in case of an error(in any of the two branches) through the block
    The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
      Milan

File to Idoc Scenario using third party systems

hi,
Working with a File to Idoc Scenario. Been able to successfully define everything in IR / ID. However when I go to BD87 (reciever system) and see the status of Idoc processed - getting the error code 51 "Function Module Not Allowed: <Function Name>" . What could be the reason for this???
Have defined partner profiles in WE20 of type LS and also specified an inbound paramter in the post processing tab for partner profile. Are there any other settings I need to take care of to avoid getting that error.

Hi
I am giving u all the steps whioch are required for
<b>File to IDoc</b> Scenario
SM59- Create RFC destination
IDX1- Create a IDXPORT in idx1
IDX2-3. Import metadata of IDocs in idx2
Bus. service adapter specific Identifiers-->Logical sys name
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
SE16-Table name->LFA1 to check vendor has been created
Check have u followed all the steps.
Regards
Arpit Seth

Multiple Operations for File to IDoc scenario

Hi all,
I have a file to IDoc scenario where two IdocXML files (one for INSERT and one for CHANGE of Business Object) have to be picked up by file adapter and transfered to SAP System. In respect to the multiple operations PI 7.1 can handle I would like to create one Service Interface for the Business Object and two operations (INSERT and CHANGE).
Unfortunately I am not able to use the operation in the sender agreement, so I can't specify the comm-channel for the operations, only for the interface.
So, can I use multiple operations in a file scenario (respectively in a non Web Service scenario)??
Thanks a bunch,
Manfred

The scenario is pretty easy. I just want two different files to be read by one Comm Channel with one Sender Agreement.
They are both transferred to the same receiver. I just wanted to test one scenario using multiple operations.
In your blog you described that you should not use two operations with the same set of messages (synchronous/asynchronous). In my case both are asynchronous but I already tried it with one being sync and the other one async. Where did you actually get this information, it puzzles me a little since SAP does the same in its preconfigured Enterprise Services as far as I know.
In the Trace for pipeline step Interface determination in SXMB_MONI it says:
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_RECEIVER</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_RECEIVER SI_..._Out</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: SI_..._Out</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
So it finds the Outbound Interface in Receiver side which is wrong since I specified the Inbound Interface in the Interface determination. Did anyone of you already encounter such a behaviour? I already deleted and recreated all routing objects but without any success.
Thanks,
Manfred

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error while doing a File to IDOC scenario

Hi Experts,
I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
I have checked with all the configurations and couldnt find where it went wrong.
Kindly help me in this regard.
Thanks.

Hi
Check the inbound parameter and the process code.
To find Process code for IDoc use Tcode WE42.
ALE idoc trouble shooting use
Troubleshooting of ALE Process
look also this configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

About FILE to IDOC scenario

Hi Experts,
i need some help for doing file to idoc scenario.
1. what are the configurations we must do while doing this scenario?
2. How to communicate with Legacy system to sap system?
3. How to create the business and logical systems for SAP systems in SLD?
4. How to define parameters in communcation in ID?
5. what work shold be done using SM59 and WE20? and specify the steps please?
6. finally if u having word file please send from the creation of logical system for sap system?
thanx.

Go thru below mentioned links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
once you go thru them you will find answers for questions.
thanks,
Venkat

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
   I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP   = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE   = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Partner Profile for file to IDOC scenario

Hi experts,
I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
Thanks
Manoj

Hi,
>>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
in most cases you will only use one logical system in WE20
this will be XI's logical system - and you can route all the traffic
via this logicail system - this is the most popular case
for more about IDOCs and XI have a look at my book:
Mastering IDoc Business Scenarios with the SAP XI
http://www.sap-press.com/product.cfm?account=&product=H1935
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

Problem with Sender service in File to IDOC scenario

Hello All,
Am doing a file to IDOC scenario.
I have configured the sending system as a party and added a business component, to the BC attached the service interface and also configured the sender Communication channel(CC) as file.
On the receiving end configured the R/3 system from SLD as the business system and configured the receiver CCl. Can see the R/3 logical system in the Adapter specific identifiers at business system.
Pushing the file get an error "Unable to convert the sender service to an ALE Logical System". But choosing "Take sender from Payload" in the receiver CC is resolving the problem, however the sender partner number remains the same as what I have mapped to the control record in message mapping (which is like hard coding).
My questions are:
1. Am I doing the correct config in terms of the scenario. (like using "Take sender from Payload")
2. I tried using identifiers at the party level to convert the sending system, but nothing seems to work. But sending system remains the same as the constant from mapping.
Suggestions would be very much helpful..
--Prashanth
PS: Have gone through many blogs and posts on the forums, but may be I did not see the correct thread. Apologies if I am asking this again.

Hi Prashanth,
refer the below discussion i think it will solve your problem.
File To Idoc scenario
Thanks

Without using ID file to idoc scenario

Similar Messages

Maybe you are looking for