Wizard Error ESR, I tried create transport request

Hello guys!
I have this problem when try create Order ( Transport request) from wizard ESR.
Cannot get default request (for applType: XI, user: xxxxx, sid: XS, SC: b9ca1bd07fb611df9997d6feac116089),
(service=com.sap.tms)
Can you send me any blogs of help than contemplates this error?
Notes: We are using Sap Netweaver 7.1
Edited by: ecruz2010 on Aug 18, 2011 2:32 PM
Edited by: ecruz2010 on Aug 18, 2011 3:06 PM
Edited by: ecruz2010 on Aug 18, 2011 3:06 PM

Hi,
Please check if the below thread is useful:
More Problems installing Enhanced CTS (CTS+) on PI 7.1 System
Regards,
Sanjeev.

Similar Messages

CHaRM-Action "Create Transport Request" is cancelled

Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep L

hi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV

Unable to Create Transport request in more then one DEV client (in ChaRM)

Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
Kathir

Hi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM

Error when try to release transport request

I encounter some error during the release of transport request.
First, when I go to SE10, it will show message "Global information cannot be read". Then, after I login, I try to release a request, it prompt me another message "Test call of transport control program (tp) ended with return code 0208". I had tried to update the tp.exe, but still the same error. Any clue to solve it? Below is the error details:
Test call of transport control program (tp) ended with return code 0208
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK DVPK900006 pf=
swisapfs01\sapmnt\trans\bin\TP_DOMAIN_PRD.PFL -Dtransdir="
which checks the export requirements, returned the following information:
Return code from tp: 0208
Error text from tp: ERROR:
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed

Hi,
Any STMS operation will not work without the DIR_TRANS directory defined and accessible - and that seems to be the problem in your system.
Set the transdir via links:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3d/ad5bb54ebc11d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1e/080c6401b011d284870000e8a57770/content.htm
Regards,
Srikishan

BAPI to create transport request.

Hi All,
I want to create Transport request through program . Is there any functionModule/ BAPI for the same?

>
Thomas Zloch wrote:
> But whenever possible (like in this case with the transport requests) I avoid BDC because it is very "fragile" especially for more complex transactions (we all know the "field not available" or "invalid screen" type of errors), and you will have to do rework after every upgrade or patch where SAP decided to change the screen flow of the transaction you are calling.
> Cheers
> Thomas
I personally think that("field not available" or "invalid screen") would not be in case od BDC cause,as we all know user does not much do ( I Would say R&D ) in SE10 except just realease the TR
so BDC would be preffer as No authorization check in Above BAPI suggested.
Cheers
Amit.

How to create transport request in object transport

How to create transport request in object transport from server to server
thanks in advance
arya

hi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction.

Create transport request based on SDMI transaction type

Hello,
a customer of mine intends to use transaction type SDMI in a kind of unusual way. He only creates SDMIs without creating projects, cycles or change requests in ChaRM. He uses a customized copy of the normal correction to track his changes and now needs to activate the functionality to create transport requests as an auditor requirement.
As I'm not proficient in ChaRM, I would like to know if that is at all possible.
Assuming it is possible, what would be the preferences to use action "Create Transport Request" regarding IBase etc.?
Assuming it is not possible, what would be necessary as a minimum to establish the link to the respective system in which the transport request should be created to get that action working, a maintenance cycle? How is the maintenance cycle linked to the ticket?
That are a lot of questions, and it would be highly appreciated if somebody could lighten up the fog there for me.
Thank you in advance!
Kind regards,
Emanuel

Hi,
1) Do I need to perform any steps in the task list before ChaRM can be used?
No once task list is in active state and sdmn is created for ur project u can start using charms
2) How is the maintenance cycle ticket (SDMN) linked to the change requests? Is this linkage done in the SDCR ticket via the maintenance project in the "Customer fields", where solution, maintenance project etc. can be assigned? Or is this implicitly done by the chosen IBase?
Yes everything is dependent on IBASE and logical component.
Check this links
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Check SMP/SDN
https://websmp208.sap-ag.de/changecontrol
Resources on CTS+ [original link is broken]
Hope it solves ur queries
Regards
Prakhar

How to create transport request for standard web template

hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shalini

Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome

How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

Creating transport request manually

Hi All,
I have an entry in a table, I want to transport it to other systems (QA).How can I create Transport Request manually and attach table entry to this Transport Request.
Please let me know procedure how to do this.
Thanks in advance
jog

Hi,
Check this :
Create a workbench transport request in se09 and double click on it, system opens request/task screen , go to objects tab add program id as 'R3TR' object type as 'TABU' object name as table name (ex: ZTABLE) and click on the function button , put '*' in table keys and save the request.
now transport this request , table entries will be transported to respective systems .
Regards
Appana

Creating transport request for SQVI

Hi ABAP Guru's,
I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
Thanks.
Regards,
Tushar.

Hi Tushar,
You cannot transport The query made via SQVI is only intended for individual use/reporting purpose.
To transport the query by converting it to SAP Query source of data tobe converted to an Infoset.
SQVI-> SAP QUERY
QUERY(MENU) -> CONVERT QUICKVIEWS
Assign Infoset and Area to the Query and then you can transport.
Hope this may help you.
Regards,
Lanka

SCMA create transport request: Suggested request owner is wrong

Hi,
When we try to create a transport request via SCMA the suggested request owner is not the user executing the create request itself but the user who created the project some time ago. Eventhough this user can be changed this leads to wrongly assigned transport requests.
Since project creation number of users have been added to the project in solar_project_admin but they are not taken into account.
We already did try creating a new task list for the project but that did not work.
Any ideas how to solve this?
thanks
Tom

Hi Tom,
Normally it is done via action Create Transport Request in the SDHF/SDMI document.
There are certain advantages of it.....for e.g..u can create a task if u want to have mulitple changes and can assign multiple developers
Try this it will solve ur problem
Regards
Prakhar

CREATING TRANSPORT REQUEST TO OBJECT

Hi All,
I created an object in a LOCAL OBJECT. Can I create Transport Request for that iobject. If so how ?
Thanks & regards ,
Mani.

Hi Mani,
Please check the thread,
how to assign a request number to the local object
Regards,
Hema.
Reward points if it is useful.

When i change, create cycle (ksu1),I donot want to create transport request

when i change, create cycle (ksu1)
i donot want to create transport request ?
when i change/create cycle(KSU1,KSU2) i just want to change/create cycle.
i donot want to configure about cycle.
what should i do ?

Hi dittaporn
If you want to change whether your customization should create transport request or not you go in Tcode SCC4.Here you select your client for which you want to make changes and select NO CHANGES ALLOWED .After doing this setting, system will not create request pop up box.but i would suggest, you must ask your system administrator ( Basis people) before make any changes.
Hope this helps you and if found useful assign points.
Regards
Nilesh

Creating transportation requests.

Hi,
how can I create transportation requests for all customizing objects created before setting in trx SCC4 "<b>Automatic recording of changes</b>"?
Best Regards

Hi,
the problem is that before setting "Automatic recording of changes" there were being created customizing objects as company code, plant etc.etc. without transportation requests.
Now what I need is creating transportation requests, for those objects without transportation requests for the above reason.
To do this I found in SAP customizing implementation guide (SPRO) that in each customizing object from the menu is possible do that clicking Table view, Transport.
Best regards

Wizard Error ESR, I tried create transport request

Similar Messages

Maybe you are looking for