Wizard not shown in model after update to SP5

Hi,
I updated the CE to SP5. I have a VC model with a wizard control and when I open it now I get an internal error with the following message:
ERROR: Failed to instantiate core.lyt:Layout aspect for null ('Class' is null or not an object)
[W] Failed to repaint Wizard1
I can see the roadmap but content of the wizard steps are not shown anymore. Everything worked fine with SP4. Anybody else with the same problem?
Regards,
Kevin

Hi Guy,
thanks for the info about the patched SPS5. Is it already available because there is no information in the SWDC about a patched version. In other words, how can I be sure that I really download the right version.
Regards,
Kevin

Similar Messages

Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...

My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2

My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2

- Are you sure you have a 2G iPod and not a 1G? Yucan can itell the difference here by the shape of the black antenna cover on the back of the iPOd.
Identifying iPod models
- What version of iTunes is installed opn the computer?

Camera roll not seen in album after updating ios8

Camera roll not seen in album after updating ios8

That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album. This Help document explains, where you will see the photos now.
Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
Have you enabled the "Summarise Photos" option? Then disable it.
By default, Photos displays a representative subset of your photos when you view by year or by collection.
To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
And did you migrate your photos from iPhoto? Some photos may still be in the iPhoto Library, that is no longer supported:
See: Migrating from iPhoto for iOS to Photos on iOS 8

Canon Pixma MP 540 does not scan any longer after update mountain lion. printer works normally. Who can help.

My Canon Pixma MP 540 does not scan any longer after update mountain lion. MP Navigator EX 2.0 starts and immediatley stops and comes with this message:
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x825c0f0'
Printer works normally. Who can help.
Thank you
PeterPan52

Hi
Did you find a solution to this ? I amhaving same problem
Thanks

Can not play any video after update to 4.4.2

Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

I have made some tests,
I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
It always says the same error.
I reset the divice again and made a restore, but the same error.
I change the HDMI cable, same error.
It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
Need some help

TS4036 My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud.

My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud. When I go to iCloud.com my photostream is not there.

A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
From there sync them back to your device through iTunes or whatever method you use.
There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
Hope this helps.

I could not activate the phone after updating software to iOS7.

Dear Apple Support team.
Please help to investigate the problem as I could not activate the phone after updating software to iOS7. in the phone the erroe message is "Your iPhone could not be activated because the actiovation server cannot reached. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
I have try to activate both of way such by WiFi & Cellular activation and connecting with iTunes but still face the problem and could not completed activation the phone.
How do i activate the phone or have to wait for hour not couple min as you suggested.
your feedback quickly would be appreciated.
Thank You
Kritpas

There is nothing you can do. That is the Activation Lock that Apple has implemented tout down on theft of their iPhones.
Most likely the iPhone is stolen.
It is totally worthless to you.

Not able to activate after updating to ios6.1 on iphone 4s

not able to activate after updating to ios6.1 on iphone 4s , it says servers temp unavailable....

Hey JYTF1975,
That is never a good time when you are getting error messages when you are trying to restore. If you are getting a bunch of variations of error 0xE and on windows, take a look at the article below for some troubleshooting options to get it back up so you can use your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
https://support.apple.com/en-us/ts3221
Take care,
-Norm G.

[SOLVED] X Server not accepting remote connections after update

Hi everyone! After recent upgrade Xorg on my laptop not allows other machines to use him as a window server, just an example:
on laptop:
vitaly@trifon:~/VM$ ps aux | grep Xorg
root 499 2.7 1.3 393628 105276 tty7 Ssl+ фев17 139:48 /usr/lib/xorg-server/Xorg -br -novtswitch -quiet :0 vt7 -auth /var/run/xauth/A:0-rfwYma
vitaly 23338 0.0 0.0 10728 2272 pts/3 S+ 08:01 0:00 grep --color=auto Xorg
As you can see, '-nolisten tcp' flag is absent.
vitaly@trifon:~/VM$ xhost
access control enabled, only authorized clients can connect
INET:192.168.2.2
INET:192.168.13.13
192.168.2.2 is my Virtual machine, which works perfectly before upgrade
if I try to start some graphics program, I see that:
[sandbox@sandbox ~]$ DISPLAY=192.168.2.1:0.0 xterm
xterm: Xt error: Can't open display: 192.168.2.1:0.0
Please tell me how can I let my server work?
Last edited by Trifon (2015-02-21 14:38:14)

No good results
first i scanned 6000 port, it was closed. i scanned random ports, all was "closed" too
Nmap done: 1 IP address (1 host up) scanned in 0.22 seconds
[sandbox@sandbox ~]$ nmap -p6000 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:53 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00025s latency).
PORT STATE SERVICE
6000/tcp closed X11
Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
[sandbox@sandbox ~]$ nmap -p1234 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:53 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00024s latency).
PORT STATE SERVICE
1234/tcp closed hotline
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
[sandbox@sandbox ~]$ nmap -p5731 192.168.2.1
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 12:54 MSK
Nmap scan report for 192.168.2.1
Host is up (0.00029s latency).
PORT STATE SERVICE
5731/tcp closed unknown
Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
But scan result on working machine tells me that 6000 port is open (Debian Wheezy, dist-upgrade done yesterday, xorg-server was updated and restarted)
vitaly@trifon:/usr/lib/xorg-server$ nmap 192.168.X.X
Starting Nmap 6.47 ( http://nmap.org ) at 2015-02-21 11:29 MSK
Nmap scan report for 192.168.X.X
Host is up (0.14s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
6000/tcp open X11
6881/tcp open bittorrent-tracker
Last edited by Trifon (2015-02-21 09:58:23)

IPod Not Recognized by PC After Update 2006-03-23

This is so frustrating- I was having sync lapses with iTunes, and the PC would "freeze" with the iPod connected to it, before Updater 2006-03-23 was run. After Updater was run, now the PC does not recognize the iPod at all. In fact, Updater 2006-03-23 does not even recognize the iPod. (It always asks to connect my iPod or says "Cannot mount iPod.") Assistance with this would be appreciated.
iPod Video 30GB Windows XP

Hi Todd,
Welcome to Apple Discussions
You may want to look at Knowledge Base Document #61711 on iPod missing in "My Computer" or in iTunes on Windows and Knowledge Base Document #93499 on Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

My iPhone 5 is not appread in itunes after updating to new itunes software

Please if any one can help as few days back I updated itunes with new software. after updating, my iPhone 5 is not appearing in tunes.

Hello Zrc_iPhone,
I'd recommend taking a look through the following article, as it provides steps that can help get your iPhone back into iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Disk Utility not finding Hard Drives after Updates

Howdy;
Updated my B&W G3 to 10.4.4 and itunes 6.0.2. After update and restart, ran Disk Utility (DU), which seem to just get into a loop "Gathering disk data". Force quit DU and tried running from Tiger DVD, but similar story.
I have done a little research and there has been many problems with DU linked to itunes 6.0.2 update, but not quite the same (no B&W G3 w/10.4.4 and different DU hang point).
I followed: http://discussions.apple.com/message.jspa?messageID=1505537#1505537
and even tried moving iTunes to desktop; trashing several iTunes.pkg files; restarting, all to no avail.
Any additional suggestions out there?
Dual 2.5 G5; Mac min; B&W G3 Mac OS X (10.4.4)

I doubt that any jumpers are needed, since this is the only (master) drive in the system. WD's site has pretty good info on this. Verify for yourself however.
Also, from their site:
How to partition and format an internal slave drive or an external drive in a Mac OS X (all versions).
Answer
In Mac OS X, you can use the built in Disk Utility to partition and initialize the drive so it will appear on the desktop.
1. Open the main drive (the drive that contains the operating system).
2. Open the Applications folder.
3. Open the Utilities folder.
4. Select Disk Utility.
5. The drives are displayed on the left side of the window. Click on the drive that you wish to partition (the top drive listing for the hard drive that you want to work with).
6. Once the drive is selected click on Partition.
7. Click on the Options button to select the partitioning scheme.
8. Click on Apple Partitioning Scheme or Apple Partitioning Map and then click on the OK button.
9. You will see several options for setting up the drive. Once you have selected the number of partitions, the format type you want, and a volume label, click the Partition button.
10. Following the completion of this process, the drive will appear on the desktop.
Joe

Error "file is not a resource file" after updating to LV2010

Hello everybody,
my problem is that I can't call a c++ dll after updating to LV2010 and Visual Studio 2010. The DLL is written in Visual Studio 2008 and worked perfectly. Now I compiled the dll again because add some new functionality. In the development pc I fixed that problem. I manually replace the call library function nodes and configured it again. I made a installer package from my lv project. This installation don't work with the dll on the target with same error "file is not a resource file". The rest of the application works fine.
Development PC: Win 7 Enterprise 32Bit
Target PC: Win XP Service Pack 3 32Bit

Hi
Verify that all your files have correct extensions and rebuild the.exe file.
I hope this will help
Kind regards,

HP Slate 7 does not see SD card after update

My tablet also just installed Android update and it will no longer recognize the SD card. I tried another SD card and it also is not recognized.Tablet model is Slate 7 4601It shows Android version now as 4.1.1Build number HP_slate v1.05.17_userI have my music and some movies on the sd card and it always worked flawlessly before the update.i also Tried to reboot,but nothings happen pls help.Any siggestions? Is HP listening? It sounds like others have suffered the same issue, pls make an action...many of us suffered same issue....

Hi!, djaulbryan: Your problem is the same what many users, in tablets with OS Android 4.1.1, when actualized compilation number v1.05.17_user. You can download and install the apk File Manager HD, for use Cloud, FTP (File TRansfer Protocol), LAN, etc ... HP know this problem and IMHO, this problem, will be solved, soon.

Wizard not shown in model after update to SP5

Similar Messages

Maybe you are looking for