WL 7 installation on NT server

Does WL 7 beta work on NT Server 4 with service pack 6?
I install WL 7 on my NT server, but i can't start it.
Ibrahim

beta support is gone
Try GA version
Download from commerce.bea.com
ibrahim wrote:
Does WL 7 beta work on NT Server 4 with service pack 6?
I install WL 7 on my NT server, but i can't start it.
Ibrahim

Similar Messages

  • Error while installation of content server.

    HI
    I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the diagnosticTests.jsp Which tells whether the installation is successful or not....
    I found 2 bugs
    - Root Section Publishing Target
    - Root Section Preview Target
    Possible Resolution is as follows.
    The Publishing Target Browser Path is invalid. The item was published successfully but could not be found at the Browser Path. To change the publishing target right click on the root folder in Content Explorer and choose "Publishing Target". Click on the Publish Tab. Change the Browser Path to a valid path.
    I am not able to find the Content server explorer. Please let me know how and where can I find these editor
    - Content server explorer
    - Portlet Editor
    - Data Entry Template Editor
    - Presentation Template Editor
    - Workflow Editor
    - WebDav Interface
    Thanks
    Vivek

    Hi Sankar
    Error indicates memory problem.
    1. go to configtool and change the values for > server0 > Max heap size = 2048 MB.
    -xx:NewSize=320m
    -xx:MaxNewSize=320m
    -xms2048m
    -xx:PermSize=256m
    -xx:MaxPermSize=256m
    Please check the note 723909 for any further clarification.
    Exclusively for Sun Solaris
    Check the following:
    1050866 : Java VM terminates under Sun Solaris 5.10 during install.
    1048824: JLaunch may fail to start the Java VM during installation
    Hope this helps
    Cheers !!!
    Satish Kumar.

  • Unattended  Solaris 10 installation with jumpstart server issue

    Hello,
    I have setup a jumpstart server and am finding it difficult to get a fully unattended solaris 10 sparc 10/09 install on a t1000 client. The console connection to the client goes into interactive mode at the point in system identification when the installer asks if the system is networked or non-networked, and runs a setup of default time zone and date/time. Using esc-2 to advance through the interactive menu it asks if ithe system is on a subnet, for the netmask (which is there as default), asks if the current time is correct, then asks me to confirm that my selections are correct. When I confirm it goes on it's merry way to finish the installation unattended.
    My guess is it does not like one of the values in the sysidcfg file being used, but can't seem to see where the problem is. I don't see anything in the table of sysidcfg keywords from the online docs that specify networked or not, and I am using the network_interface keyword to define hostname, ip, default router, netmask and ipv6, and thought that should take care of the networking portion of system identification, also have timezone and time server set.
    Could it be that I am configuring an ethernet port that is not connected (bge0)? This computer will be deployed on a DMZ type network, and the jumpstart server is located on a different network our internal private network. The jumpstart installation via the server is done by using a temporary ethernet connection on a second interface of the client. One other note the defined time server is on the dmz so the installation program won't see it.
    Any suggestions on what might be causing the interactive installer to kick in?
    Here is the sysidcfg used for the client:
    more sysidcfg_vlan3/sysidcfg
    keyboard=US-English
    terminal=vt100
    security_policy=NONE
    system_locale=en_US
    install_locale=en_US
    timeserver=service-time
    timezone=US/Eastern
    network_interface=bge0 {hostname=D-Wade.xxx.xxxx.xxx default_route=xx.xx.xxx.1 ip_address=xx.xx.xxx..3 netmask=255.255.255.0 protocol_ipv6=no}
    name_service=NONE
    nfs4_domain=dynamic
    root_password=someEncryptedValue
    service_profile=limited_net
    Thanks,
    John
    Edited by: jmck407 on Aug 6, 2010 11:42 AM

    update. Fixed the problem with date/time by using abrante's suggestion of setting the time server to localhost. Don't get prompted for date/time information in the interactive installer any more.
    If I setup the sysidcfg file to configure the ethernet port being used to communicate with the jumpstart server (bge1), using an ip and netmask that is on the jumpstart server network, the installation goes through fully un-attended.
    Is there any way to get a second interface (in this case bge0) configured with ip/netmask values that are not part of the jumpstart server's network, using a non interactive jumpstart installation? Using these values in sysidcfg, the only things prompted for during the installation are, Is the system on a subnet, and what is the netmask. Anyone know what the sysidcfg part of the installation does to check the validity of a netmask value given in the sysidcfg file on the jumpstart server?
    If need be, I guess the interface could be configured in the finish script.
    more sysidcfg_vlan3/sysidcfg
    keyboard=US-English
    terminal=vt100
    security_policy=NONE
    system_locale=en_US
    install_locale=en_US
    timeserver=localhost
    timezone=US/Eastern
    network_interface=bge0 {hostname=D-Wade.xxx.xxxx.xxx default_route=xx.xx.xxx.1 ip_address=xx.xx.xxx..3 netmask=255.255.255.0 protocol_ipv6=no}
    name_service=NONE
    nfs4_domain=dynamic
    root_password=someEncryptedValue
    service_profile=limited_net

  • À PROBLEM IN THE INSTALLATION OF SQL SERVER

    I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
    PLEASE HELP ME !

    I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
    PLEASE HELP ME !
    Without the exact error message wwe will just hit arrow in the bush.Please post summary.txt which was generated due to failed installation.Below link will help you locate it
    http://technet.microsoft.com/en-us/library/ms143702.aspx
    Below link will give useful info about how to proceed with installing SQL server on win 8
    Considerations before installing SQL server on win 8
    Hardware and software requirement for installing SQL server 2012
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Can MoveUser move a user's mailbox from an installation of Mail Server 2.X to Messaging Server 3.X?

    Can MoveUser move a user's mailbox from an installation of Mail
    Server 2.X to Messaging Server 3.X?
    <P>
    Yes.
    The 2.x server allows the postmaster to login to a user's account.
    Try running MoveUser as follows:
    MoveUser -u uid -s host -xPostmaster:uid -p password
    -d desthost -a proxyuser -v proxypassword -m mailboxpath
    Notes:
    Mail Server 2.x uses a local database and not an LDAP server
    for account information. The -l option
    specify ldap URL and the associated bindDN password,
    therefore, are not valid when moving from
    Mail Server 2.x to Messaging Server 3.x.
    "Postmaster:" is case sensitive.
    The -a and -v options are for Messaging Server 3.x
    ProxyAuthUser credentials.
    We do NOT allow this login to a 3.x server
    (use PROXYAUTH instead).

    Additionally
    When I type in fasn26p (machine name) the Oracle Application Server Welcome page displays.
    I can get to the Enterprise Manager via the link on the page.
    On the All Programs menu, under Oracle - OraDb10g_home1 I can access the Datbase Control page and login. The line for Database Instance: Orcl is -
    http://fasn26p:1158/em/consol/database/instance/sitemap?event=doloa&....
    One last thought. I installed this with this on my network at home and I now have it disconnected from the network. So no IP address for the adapter and I wonder if that can cause a problem with Apache?
    Sam

  • SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)

    Hi everyone,
    I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
    has window 7 OS , 80 GB freen HD  and 6 GB RAM. ) Therefore I  download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
    But during installation of SQL server  I have problem ...it says
    the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
    The database engine  also not installed displaying same error.
    I don't know how can i install sql server 2012 to use with visual studio in same computer.
    Can somebody please help with SQL installation please ?
    It will be great help.
    Many thanks in advance 
    regards
    rash

    Hi 
    my summary file is :
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2146232832
      Start time:                    2015-04-06 11:34:18
      End time:                      2015-04-06 19:04:46
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for DQ:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for FullText:        Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for IS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for RS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Next step for AS:              Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
    Machine Properties:
      Machine name:                  RASHA-VAIO
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
      SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services                 1033      
              Express Edition      10.1.2531.0     No        
      SQL Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication                   1033      
              Express Edition      10.1.2531.0     No        
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         E:\x64\setup\
      Installation edition:          Enterprise
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
      ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
      ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  TABULAR
      ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            RASHA-VAIO\RASHA
      ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   MAIN
      CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
      CLTSTARTUPTYPE:                Manual
      CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               Manual
      CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     RASHA-VAIO\RASHA
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT Service\MsDtsServer110
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSHPINSTALLMODE:              SharePointFilesOnlyMode
      RSSVCACCOUNT:                  NT Service\ReportServer
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  Latin1_General_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           RASHA-VAIO\RASHA
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    1
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Passed
      Feature:                       Client Tools Connectivity
      Status:                        Passed
      Feature:                       Client Tools SDK
      Status:                        Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Passed
      Feature:                       Management Tools - Basic
      Status:                        Passed
      Feature:                       SQL Server Data Tools
      Status:                        Passed
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Data Quality Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x80004005
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Master Data Services
      Status:                        Passed
      Feature:                       Distributed Replay Client
      Status:                        Passed
      Feature:                       Distributed Replay Controller
      Status:                        Passed
      Feature:                       Integration Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Integration Services
      Component error code:          0x84BB0001
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Data Quality Client
      Status:                        Passed
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Reporting Services
      Component error code:          0x84BB0001
      Error description:             The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
      Feature:                       Analysis Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
      Component name:                SQL Server Analysis Services
      Component error code:          0x80131600
      Error description:             The service could not be started. Reason:  The service did not respond to the start or control request in a timely fashion.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
      Feature:                       Reporting Services - SharePoint
      Status:                        Passed
      Feature:                       Reporting Services Add-in for SharePoint Products
      Status:                        Passed
      Feature:                       SQL Browser
      Status:                        Passed
      Feature:                       Documentation Components
      Status:                        Passed
      Feature:                       SQL Writer
      Status:                        Passed
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
    I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
    thank you

  • Error occurred in diagnosticTests.jsp after installation of content server

    HI
    I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the diagnosticTests.jsp Which tells whether the installation is successful or not....
    I found 2 bugs
    - Root Section Publishing Target
    - Root Section Preview Target
    Possible Resolution is as follows.
    The Publishing Target Browser Path is invalid. The item was published successfully but could not be found at the Browser Path. To change the publishing target right click on the root folder in Content Explorer and choose "Publishing Target". Click on the Publish Tab. Change the Browser Path to a valid path.
    I am not able to find the Content server explorer. Please let me know how and where can I find these editor
    - Content server explorer
    - Portlet Editor
    - Data Entry Template Editor
    - Presentation Template Editor
    - Workflow Editor
    - WebDav Interface
    Thanks
    Vivek

    Hi Romain Testu, Jstorz & srinathmenon:
    Thanks for the information on the 2 exes that I need to run (IdcServer.exe & IdcAdmin.exe). I ran these two exes from the command prompt as suggested by srinathmenon (I first ran IdcServer next IdcAdmin). However, I did not find any new windows services showing up, with any similar sounding name.
    I once again visited the http://localhost/idc, and when I clicked on the picture of the LOCK, I found a new difference from before. Earlier, I was getting an error message as soon as I clicked on the LOCK. Now, when I clicked on the LOCK, I got a prompt for Username and Password. I typed the default sysadmin & idc. Then I got logged onto a window which says "Oracle Content Server", with three Tree-view dropdowns on the left (My Content Server, Browse Content and Search).
    But in the main part of this Oracle Content Server window, it gives the following error message: -
    Content Server Request failed..Unable to retrieve page. Permission denied. Address 127.0.0.1 is not an allowable remote socket address
    Could you please suggest what could be wrong here?
    Thanks,
    -Deepak

  • What DIAdem version installs NI License Server 3.5 or higher?

    What DIAdem version installs NI License Server 3.5 or higher?

    Hi Larry_Nguyen,
    Do you mean NI License Manager? Why do you ask? If you need NI License Manager, you can download NI License Manager 3.7 for free here.
    Jeff Munn
    Applications Engineer
    National Instruments

  • VMWare: 1 Oracle installation per virtual server, or 1 separate install

    The scenario is that we are going to put our support benches on VMware.
    The question is: should we have 1 oracle installation per virtual server or a separate virtual server for oracle.
    If we go for the 1 oracle installation per virtual server, this mimics our customer environment.
    If we install oracle separately, then we have to run two virtual machines. One for Oracle(with one instance per customer) and one for the Product which connects to the appropriate instance.
    Looking at it I'm inclined to go for the 1 orcale installation per virtual server, as this will allow for easier maintenance and upgrade paths.
    Apart form disk space , are there any other drawbacks?
    Are there any advantages to having oracle on a separate virtual machine?

    VMWare is not supported for Oracle, so if this is to mimic a customer environment, then you should be aware of this. In my personal experience I have not seen any noticeable difference from the testing and learning point of view.
    Installing Oracle on VMWare at the end of the day will consume the resources of the server where the VM is hosted, so it is all up to the CPU and memory resources you have in your host server. A drawback is the hard disk speed, the lower the more noticeable performance reduction, so be aware of this. It is advisable, you should make sure you have installed the VMWare tools.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Offline installer for Lion Server? Can it be done?

    Hi guys,
    /rant
    Before I get to the topic of this post let me state, the claimed download size for Lion Server is WAAAAAY off the +14MB they say it is. I have reinstalled it few times now and this time around I monitored the download and it came in at the +200MB mark!!! Sure, maybe the initial installer is only 14MB but it pulls down another +200MB when setting it up. Why is this not mentioned on the App Store page? Surely we should be told about such a large additional download.
    /end rant
    Can anyone tell me if its possible to make an offline installer for Lion Server, in the same way that it can be done for the Lion client?
    I have been tinkering with it a lot and have had to reinstall a few times and would prefer to not have to download 200MB everytime I screw something up, if it can be avoided.
    Thanks in advance.

    Hi defecta,
    i have the same problem. I had to install a new server with lion at the cusomers site in a heavy military bunker below earth and no internet around. I was allowed to bring the server up to surface and give it internet with a myfi. As you can imagine it took some hours to download on a bad mobile connection out in the woods. I do know i have to install that server from scratch after it has been tested.
    Have you or anyone else been able to capture the download? Is there a place to get an offline install package, a DVD or Stick. Sadly its to late now to image that server after fresh install.

  • 64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?

    Hi,
    I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
    Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
    I downloaded "wls1032_generic.jar" and try to install it by the command below
    "java -d64 -jar wls1032_generic.jar"
    however I got the message below
    Unrecognized option: -d64
    Couldn't create the Java virtual machine
    Any options about this problem. Where am I making mistake?

    Hi,
    You need to make sure the following things :
    1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
    2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
    Then just run the following command to check if the JVM is 6t4 bit or not:
    set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
    *$JAVA_HOME\bin\java -version*
    3). Now u can run your WebLogic Installer like following:
    *$JAVA_HOME\bin\java -jar wls1032_generic.jar*

  • Asmca hangs during grid installation on windows server 2008 r2 x64

    Hi all,
    searched the web, but did not found a solution to this right now.
    The Grid Infrastructure installation (11.2.0.2) hangs every time i tried the installation (Basic, Advanced) on a two node configuration. Had the same issue with 11.2.0.1.
    Environment:
    - W2K8 Server EE x64, all patches installed
    - FC Storage attached
    - UAC disabled
    - Firewall diabled
    - Prereqs implemented as recommended by RAC Assurance Team
    - Using Domain-User (Member of the local Administrator Group) for installation
    - Public-IPs and SCAN-IPs in DNS has been configured
    - GNS and IMPI not used
    Used diskpart to create extended partition and logical partition as described in the manuals. Stamped GRID-disk using asmtoolg.
    Whatever I tried, asmca seems to hang while creating the diskgroup for OCR/Voting ...
    ... maybe someone out there has an idea what may cause this?
    Some logs that explain the problem:
    cluvfy
    C:\install\11.2.0.2\grid>runcluvfy.bat stage -pre crsinst -n BKO-dbqc01,BKO-dbqc
    02 -verbose
    Vorpr³fungen f³r Cluster-Services-Setup werden ausgef³hrt.
    Knotenzugõnglichkeit wird gepr³ft...
    Pr³fung: Knotenzugõnglichkeit von Knoten "BKO-dbqc01"
    Zielknoten Zugõnglich?
    BKO-dbqc02 ja
    BKO-dbqc01 ja
    Ergebnis: Pr³fung auf Knotenzugõnglichkeit von Knoten "BKO-dbqc01" erfolgreich
    Benutzerõquivalenz wird ³berpr³ft...
    Pr³fung: Benutzerõquivalenz f³r Benutzer "sup-bko-him"
    Knotenname Kommentar
    BKO-dbqc02 erfolgreich
    BKO-dbqc01 erfolgreich
    Ergebnis: Pr³fung auf Benutzerõquivalenz erfolgreich f³r Benutzer "sup-bko-him"
    Knotenkonnektivitõt wird gepr³ft...
    Schnittstelleninformationen f³r Knoten "BKO-dbqc02"
    Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
    sse MTU
    PublicLAN 10.0.145.35 10.0.144.0 On-link UNKNOWN D4:85
    :64:C8:A3:FA 1500
    PrivateLAN 192.168.123.4 192.168.123.0 On-link UNKNOWN D4:8
    5:64:C8:A3:FE 1500
    Schnittstelleninformationen f³r Knoten "BKO-dbqc01"
    Name IP-Adresse Subnet Gateway Standard-Gateway HW-Adre
    sse MTU
    PublicLAN 10.0.145.32 10.0.144.0 On-link UNKNOWN D4:85
    :64:C9:28:3E 1500
    PrivateLAN 192.168.123.2 192.168.123.0 On-link UNKNOWN D4:8
    5:64:C9:28:42 1500
    Pr³fung: Knotenkonnektivitõt von Subnet "10.0.144.0"
    Quelle Ziel Angemeldet?
    BKO-dbqc02[10.0.145.35] BKO-dbqc01[10.0.145.32] ja
    Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "10.0.144.0" mit Knoten BKO
    -dbqc02,BKO-dbqc01 erfolgreich
    Pr³fung: TCP-Konnektivitõt von Subnet "10.0.144.0"
    Quelle Ziel Angemeldet?
    BKO-dbqc01:10.0.145.32 BKO-dbqc02:10.0.145.35 erfolgreich
    Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "10.0.144.0" erfolgreich
    Pr³fung: Knotenkonnektivitõt von Subnet "192.168.123.0"
    Quelle Ziel Angemeldet?
    BKO-dbqc02[192.168.123.4] BKO-dbqc01[192.168.123.2] ja
    Ergebnis: Pr³fung auf Knotenkonnektivitõt f³r Subnet "192.168.123.0" mit Knoten
    BKO-dbqc02,BKO-dbqc01 erfolgreich
    Pr³fung: TCP-Konnektivitõt von Subnet "192.168.123.0"
    Quelle Ziel Angemeldet?
    BKO-dbqc01:192.168.123.2 BKO-dbqc02:192.168.123.4 erfolgreich
    Ergebnis: Pr³fung der TCP-Konnektivitõt f³r Subnet "192.168.123.0" erfolgreich
    Folgende Schnittstellen wurden auf Subnet "10.0.144.0" gefunden, die f³r ein Pri
    vate Interconnect in Frage kommen:
    BKO-dbqc02 PublicLAN:10.0.145.35
    BKO-dbqc01 PublicLAN:10.0.145.32
    Folgende Schnittstellen wurden auf Subnet "192.168.123.0" gefunden, die f³r ein
    Private Interconnect in Frage kommen:
    BKO-dbqc02 PrivateLAN:192.168.123.4
    BKO-dbqc01 PrivateLAN:192.168.123.2
    WARNING:
    Es konnte keine geeignete Schnittstellengruppe f³r VIPs gefunden werden
    Ergebnis: Pr³fung auf Knotenkonnektivitõt erfolgreich
    Pr³fen: Gesamter Speicher
    Knotenname Verf³gbar Erforderlich Kommentar
    BKO-dbqc02 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
    BKO-dbqc01 7,99GB (8378164.0KB) 922MB (944128.0KB) erfolgreich
    Ergebnis: Gesamter Speicher ▄berpr³fung erfolgreich
    Pr³fen: Verf³gbarer Speicher
    Knotenname Verf³gbar Erforderlich Kommentar
    BKO-dbqc02 6,6797GB (7004176.0KB) 50MB (51200.0KB) erfolgreich
    BKO-dbqc01 5,7739GB (6054412.0KB) 50MB (51200.0KB) erfolgreich
    Ergebnis: Verf³gbarer Speicher ▄berpr³fung erfolgreich
    Pr³fen: Swap-Bereich
    Knotenname Verf³gbar Erforderlich Kommentar
    BKO-dbqc02 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
    BKO-dbqc01 15,9783GB (1.6754428E7KB) 7,99GB (8378164.0KB) erfolgreich
    Ergebnis: Swap-Bereich ▄berpr³fung erfolgreich
    Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc02:C:\Windows\temp"
    Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
    entar
    C:\Windows\temp BKO-dbqc02 C 105,3048GB 1GB erfo
    lgreich
    Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc02:C:\
    Windows\temp"
    Pr³fen: Freier Datentrõgerspeicher f³r "BKO-dbqc01:C:\Windows\temp"
    Pfad Knotenname Mount Point Verf³gbar Erforderlich Komm
    entar
    C:\Windows\temp BKO-dbqc01 C 91,5306GB 1GB erfo
    lgreich
    Ergebnis: Freier Datentrõgerspeicher ▄berpr³fung erfolgreich f³r "BKO-dbqc01:C:\
    Windows\temp"
    Pr³fen: Systemarchitektur
    Knotenname Verf³gbar Erforderlich Kommentar
    BKO-dbqc02 64-bit 64-bit erfolgreich
    BKO-dbqc01 64-bit 64-bit erfolgreich
    Ergebnis: Systemarchitektur ▄berpr³fung erfolgreich
    Lõnge des Wertes der Umgebungsvariable "PATH" wird gepr³ft
    Pr³fung: Lõnge des Wertes der Umgebungsvariable "PATH"
    Knotenname Festgelegt? Maximale Lõnge Aktuelle Lõnge Kommentar
    BKO-dbqc02 ja 1023 136 erfolgreich
    BKO-dbqc01 ja 1023 189 erfolgreich
    Ergebnis: Pr³fung auf Lõnge des Wertes der Umgebungsvariable "PATH" erfolgreich.
    Pr³fung auf Media Sensing-Status von TCP/IP
    Knotenname Aktiviert? Kommentar
    BKO-dbqc02 nein erfolgreich
    BKO-dbqc01 nein erfolgreich
    Ergebnis: Pr³fung auf Media Sensing-Status von TCP/IP erfolgreich
    Uhrensynchronisationspr³fungen mit dem Network Time Protocol (NTP) werden gestar
    tet...
    Es wird gepr³ft, ob Daemon aktiv ist...
    Pr³fung: Aktiv f³r "W32Time"
    Knotenname Wird ausgef³hrt?
    BKO-dbqc02 ja
    BKO-dbqc01 ja
    Ergebnis: Aktivitõtspr³fung erfolgreich f³r "W32Time"
    Pr³fung, ob der NTP-Daemon oder -Service aktiv ist, war auf allen Knoten erfolgr
    eich
    Ergebnis: Uhrensynchronisationspr³fung mit Network Time Protocol (NTP) erfolgrei
    ch
    Es wird gepr³ft, ob der aktuelle Benutzer ein Domain-Benutzer ist ...
    Es wird gepr³ft, ob Benutzer "sup-bko-him" ein Domain-Benutzer ist
    Ergebnis: Benutzer "sup-bko-him" ist Bestandteil der Domain "EUROPE"
    Pr³fen: Zeitzonenkonsistenz
    Ergebnis: Zeitzonenkonsistenz ▄berpr³fung erfolgreich
    Pr³fung auf Status des Features zur automatischen Bereitstellung
    Knotenname Aktiviert? Kommentar
    BKO-dbqc02 ja erfolgreich
    BKO-dbqc01 ja erfolgreich
    Ergebnis: Pr³fung auf Status des Features zur automatischen Bereitstellung erfol
    greich
    Vorpr³fung f³r Cluster-Services-Setup war erfolgreich.
    C:\install\11.2.0.2\grid>
    * All tests were successful, sorry for the german :-) *
    rootcrs log
    ... cutted ...
    2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl check css
    2010-12-22 21:21:01: Command output:
    CRS-4529: Cluster Synchronization Services ist online
    End Command output2010-12-22 21:21:01: CRS-2672: Versuch, "ora.mdnsd" auf "bko-dbqc01" zu starten
    2010-12-22 21:21:01: CRS-2676: Starten von "ora.mdnsd" auf "bko-dbqc01" erfolgreich
    2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gpnpd" auf "bko-dbqc01" zu starten
    2010-12-22 21:21:01: CRS-2676: Starten von "ora.gpnpd" auf "bko-dbqc01" erfolgreich
    2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssdmonitor" auf "bko-dbqc01" zu starten
    2010-12-22 21:21:01: CRS-2672: Versuch, "ora.gipcd" auf "bko-dbqc01" zu starten
    2010-12-22 21:21:01: CRS-2676: Starten von "ora.gipcd" auf "bko-dbqc01" erfolgreich
    2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssdmonitor" auf "bko-dbqc01" erfolgreich
    2010-12-22 21:21:01: CRS-2672: Versuch, "ora.cssd" auf "bko-dbqc01" zu starten
    2010-12-22 21:21:01: CRS-2676: Starten von "ora.cssd" auf "bko-dbqc01" erfolgreich
    2010-12-22 21:21:01: Querying for existing CSS voting disks
    2010-12-22 21:21:01: Performing initial configuration for cluster
    2010-12-22 21:21:01: Executing cmd: C:\grid\bin\crsctl start resource ora.ctssd -init
    2010-12-22 21:21:04: Command output:
    CRS-2672: Versuch, "ora.ctssd" auf "bko-dbqc01" zu starten
    CRS-2676: Starten von "ora.ctssd" auf "bko-dbqc01" erfolgreich
    End Command output2010-12-22 21:21:04: Start of resource "ora.ctssd" Succeeded
    2010-12-22 21:21:04: Configuring ASM via ASMCA
    2010-12-22 21:21:05: Executing as europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
    2010-12-22 21:21:05: Running as user europe\sup-bko-him: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
    2010-12-22 21:21:05: s_run_as_user: Running C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
    2010-12-22 21:21:05: Executing C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
    2010-12-22 21:21:05: Executing cmd: C:\grid\bin\asmca -silent -diskGroupName GRID -diskList '\\.\ORCLDISKGRID0' -redundancy EXTERNAL -configureLocalASM
    *^^ hangs here*
    asmca log:
    ... cutted ...
    [Finalizer] [ 2010-12-22 21:21:15.070 CET ] [ClusterUtil.finalize:102] ClusterUtil: finalized called for oracle.ops.mgmt.has.ClusterUtil@68814013
    [main] [ 2010-12-22 21:21:15.128 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
    [main] [ 2010-12-22 21:21:15.129 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
    [main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
    SQL*Plus: Release 11.2.0.2.0 Production
    [main] [ 2010-12-22 21:21:15.174 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.175 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.176 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.176 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
    [main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
    [main] [ 2010-12-22 21:21:15.177 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
    [main] [ 2010-12-22 21:21:15.178 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
    [main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
    [main] [ 2010-12-22 21:21:15.180 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
    [main] [ 2010-12-22 21:21:15.226 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
    [main] [ 2010-12-22 21:21:15.227 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
    [main] [ 2010-12-22 21:21:15.229 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [main] [ 2010-12-22 21:21:15.229 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
    [main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
    [main] [ 2010-12-22 21:21:15.318 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
    [main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
    SQL*Plus: Release 11.2.0.2.0 Production
    [main] [ 2010-12-22 21:21:15.369 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
    [main] [ 2010-12-22 21:21:15.370 CET ] [UsmcaLogger.logInfo:142] OS Auth true
    [main] [ 2010-12-22 21:21:15.777 CET ] [SQLEngine.done:2167] Done called
    [main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:172] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:configureLocalASM
    [main] [ 2010-12-22 21:21:15.778 CET ] [UsmcaLogger.logException:173] ORA-01034: ORACLE not available
    [main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logException:174] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
    oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
    oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:828)
    oracle.sysman.assistants.usmca.backend.USMInstance.configureLocalASM(USMInstance.java:3003)
    oracle.sysman.assistants.usmca.service.UsmcaService.configureLocalASM(UsmcaService.java:1049)
    oracle.sysman.assistants.usmca.model.UsmcaModel.performConfigureLocalASM(UsmcaModel.java:926)
    oracle.sysman.assistants.usmca.model.UsmcaModel.performOperation(UsmcaModel.java:779)
    oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:174)
    oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:369)
    [main] [ 2010-12-22 21:21:15.779 CET ] [UsmcaLogger.logEntry:114] Entering oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
    [main] [ 2010-12-22 21:21:15.779 CET ] [SQLEngine.done:2167] Done called
    [main] [ 2010-12-22 21:21:15.780 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
    [main] [ 2010-12-22 21:21:15.782 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [main] [ 2010-12-22 21:21:15.783 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
    [main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
    [main] [ 2010-12-22 21:21:15.874 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
    [main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
    SQL*Plus: Release 11.2.0.2.0 Production
    [main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.926 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.927 CET ] [OracleHome.getVersion:953] Current Version From Inventory: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.2.0
    [main] [ 2010-12-22 21:21:15.928 CET ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
    [main] [ 2010-12-22 21:21:15.928 CET ] [SQLEngine.getEnvParams:552] Default NLS_LANG: GERMAN_GERMANY.AL32UTF8
    [main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.getEnvParams:562] NLS_LANG: GERMAN_GERMANY.AL32UTF8
    [main] [ 2010-12-22 21:21:15.929 CET ] [SQLEngine.initialize:322] Execing SQLPLUS/SVRMGR process...
    [main] [ 2010-12-22 21:21:15.931 CET ] [SQLEngine.initialize:359] m_bReaderStarted: false
    [main] [ 2010-12-22 21:21:15.932 CET ] [SQLEngine.initialize:363] Starting Reader Thread...
    [main] [ 2010-12-22 21:21:15.982 CET ] [UsmcaLogger.logExit:123] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine
    [main] [ 2010-12-22 21:21:15.983 CET ] [OracleHome.getVersion:885] OracleHome.getVersion called. Current Version: null
    [main] [ 2010-12-22 21:21:15.985 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [main] [ 2010-12-22 21:21:15.986 CET ] [OracleHome.getVersion:904] Homeinfo C:\grid,1
    [main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:953] Current Version From Inventory: null
    [main] [ 2010-12-22 21:21:16.079 CET ] [OracleHome.getVersion:960] using sqlplus: C:\grid\bin\sqlplus.exe
    [main] [ 2010-12-22 21:21:16.132 CET ] [OracleHome.getVersion:1001] C:\grid\bin\sqlplus.exe Banner:
    SQL*Plus: Release 11.2.0.2.0 Production
    [main] [ 2010-12-22 21:21:16.133 CET ] [OracleHome.getVersion:1019] Current version from sqlplus: 11.2.0.2.0
    [main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] Role SYSASM
    [main] [ 2010-12-22 21:21:16.133 CET ] [UsmcaLogger.logInfo:142] OS Auth true
    *^^no further entries here, so hangs, too*

    hmm, it is getting more misterious:
    if i enable DTrace on the asmca-commandline (-DTRACING.ENABLED=true -DTRACING.LEVEL=2), asmca works ...

  • Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

    Hi all,
    During the installation of the LMS-4.2,
    It passed the "Initializing" and "Copying" stages,
    but, in the "Configuring", it never finishes,
    Anyone had have a similar problem?
    the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

    Thanks for the update. Glad to know it has installed now.
    There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
    Also, LMS is not supported in other languages installers or setups except English and Japanese.
    There are a couple more things you can do/check prior to running the installation.
    LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
    To check naming convention you can run the following command from Windows Command prompt: 
                                       cmd>fsutil.exe 8dot3name query <Drive>
    Example:
    C:\Users\winlau>fsutil 8dot3name query C:
    The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
    The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
    Based on the above two settings, 8dot3 name creation is enabled on C:.
    8dot3 needs to be enabled for all drives LMS will potentially use, including:
    Drive where TEMP/TMP is located
    The drive LMS is installed to
    The drive LMS backs up to
    Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
    In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
    Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
    Sample command to enable globally:
      "fsutil 8dot3name set 0"     
    Sample command to enable on one volume:
      "fsutil 8dot3name set X: 0"  
    Note that this needs a reboot to take effect.  You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:). 
    For further information  http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • 11gR2 RAC installation on Windows Server 2008 R2

    Hello everyone,
    one question, has anybody got some good tutorial or book to recommend on how to install RAC on Win Server.
    Everything is on RHL, and is there some difference.
    Thank you in advance.

    Hi John,
    You can refer oracle installation guide at below link.
    http://docs.oracle.com/cd/E11882_01/install.112/e47798/reqs.htm#NTDBI002
    Also, there are ample blogs available with step by step installation on Google. You may refer them too.
    During installation if you face any issue you may put here with the forum and we all will definitely try to help you.
    Regards,
    Nikhil Mehta

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

Maybe you are looking for

  • SOAP error in SL4 app

    I have a Silverlight 4 app that uses SOAP services to get data from a SQL db. It worked fine on a windows 2003 server with IIS 6. I am trying to move the app to a Windows 2008 Server with IIS 7. When I try to run the app on the 2008 server I get the

  • From field in red font

    I use mail to read mails from 3 different mail addresses and, since a few day, i realized that the "FROM" field (where you choose from wich account send mail) now is in a RED font. Strange, i'm sure it has been black since always and i cannot underst

  • TS4006 My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

    My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

  • Solaris 10 creates empty files on one partition

    When I use following on this partition echo "This is a text" > /vaults/active/.status/TEST the system creates a empty file cat /vaults/active/.status/TEST # returns nothing The file will be created with 0 bytes. When I use another partition all is co

  • Problem regarding  SAP Script Template

    Hi All, In SAP 4.7, after creating TEMPLATE when I am applying any pattern on that TEMPLATE the border line of that TEMPLATE becomes very thick. But when I am doing the same in E.C.C 6.0 the border line is displayed as normal. How to solve the proble