WL 8.1-Messaging Bridge..
Hi,
I'm evaluating WL 8.1, SP1 for connecting to external MQ Series using Messaging
Bridge.
I configured the External MQ-JMS queue as Source destination of Messaging Bridge
and local Weblogic JMS queue as target destination of Messaging Bridge.Then
configured a MDB to receive messages from the the local Weblogic JMS queue. This
is working fine.
Now I want to know, whether this is the only approach to get the messages from
external MQ into MDB for further processing?
Or else can I configure MDB to receive messages from the Messaging Bridge directly?
Is two-phase-commit supported only by MDB with container managed transactions?Or
MDB with bean managed transactions also support two-phase-commit?
Kindly any one please respond immediately.
Thanks in advance
Raja Phani
Hi Raja,
I'm not aware of any entity bean problems, but I'm on the JMS
team - not the EJB team. I suggest posting to the ejb newsgroup.
Tom
Raja wrote:
> Hi Dongbo Xiao/Tom
> Thanks for ur reply.This helped me a lot.Further while evaluating WL 8.1 I'm facing
> problem in Deploying Entity Beans.Some body say that there is a patch for this,Could
> u please confirm this to me.
> Thanks & regards
> Phani
>
> Dongbo Xiao <[email protected]> wrote:
>
>>
>>There is a new feature in WLS 8.1 for mapping a foreign JMS provider
>>into WL server without using the bridge. You can find the details at
>>http://edocs.bea.com/wls/docs81/ConsoleHelp/jms_config.html#accessing_foreign_providers
>>
>>Both of the container-managed and bean-managed transport support two-phase.
>>There are some best practices regarding choosing one over another in
>>the online doc
>>http://edocs.bea.com/wls/docs81/ejb/design_best_practices.html#1134968
>>
>>Thanks,
>>Dongbo
>>
>>Raja wrote:
>>
>>
>>>Hi,
>>>I'm evaluating WL 8.1, SP1 for connecting to external MQ Series using
>>
>>Messaging
>>
>>>Bridge.
>>>
>>>I configured the External MQ-JMS queue as Source destination of Messaging
>>
>>Bridge
>>
>>>and local Weblogic JMS queue as target destination of Messaging Bridge.Then
>>>configured a MDB to receive messages from the the local Weblogic JMS
>>
>>queue. This
>>
>>>is working fine.
>>>Now I want to know, whether this is the only approach to get the messages
>>
>>from
>>
>>>external MQ into MDB for further processing?
>>>Or else can I configure MDB to receive messages from the Messaging
>>
>>Bridge directly?
>>
>>>Is two-phase-commit supported only by MDB with container managed transactions?Or
>>>MDB with bean managed transactions also support two-phase-commit?
>>>
>>>Kindly any one please respond immediately.
>>>Thanks in advance
>>>Raja Phani
>>
>>
>><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
>><html>
>>There is a new feature in WLS 8.1 for mapping a foreign JMS provider
>><br>into WL server without using the bridge. You can find the details
>>at
>><br>http://edocs.bea.com/wls/docs81/ConsoleHelp/jms_config.html#accessing_foreign_providers
>><p>Both of the container-managed and bean-managed transport support two-phase.
>><br>There are some best practices regarding choosing one over another
>>in
>>the online doc
>><br>http://edocs.bea.com/wls/docs81/ejb/design_best_practices.html#1134968<a
>>href="http://edocs.bea.com/wls/docs81/ejb/design_best_practices.html#1134968"></a>
>><p>Thanks,
>><br>Dongbo
>><p>Raja wrote:
>><blockquote TYPE=CITE>Hi,
>><br>I'm evaluating WL 8.1, SP1 for connecting to external MQ Series using
>>Messaging
>><br>Bridge.
>><p>I configured the External MQ-JMS queue as Source destination of Messaging
>>Bridge
>><br>and local Weblogic JMS queue as target destination of
>>Messaging
>>Bridge.Then
>><br>configured a MDB to receive messages from the the local Weblogic
>>JMS
>>queue. This
>><br>is working fine.
>><br>Now I want to know, whether this is the only approach to get the
>>messages
>>from
>><br>external MQ into MDB for further processing?
>><br>Or else can I configure MDB to receive messages from the Messaging
>>Bridge directly?
>><br>Is two-phase-commit supported only by MDB with container managed
>>transactions?Or
>><br>MDB with bean managed transactions also support two-phase-commit?
>><p>Kindly any one please respond immediately.
>><br>Thanks in advance
>><br>Raja Phani</blockquote>
>></html>
>>
>>
>
Similar Messages
-
Using Messaging Bridge with Distributed Destinations
I'm having some problems using Distributed Destinations with the Messaging Bridge in WLS 7.0sp2. Our configuration consists of the following:
* WLS Server1:
* JMS Server1:
* inbound queue
* outbound queue
* JMS Server2:
* inbound queue
* outbound queue
* WLS Server 2:
* JMS Server3:
* inbound queue
* outbound queue
A distributed destination is configured for the inbound and outbound queues.
Two messaging queues are configured so that bridge from WLS JMS to Tibco JMS using the distributed destinations.
Everything is working fine for the inbound, but we have found that the outbound messaging bridge is picking up messages from only one of the two JMS servers on the first WLS instance. When monitoring, it can be seen that there is no consumer registered against the second JMS server.
Any suggestions?
Hi Rob,
Consumers on distributed destinations are always pinned
to a single physical destination on creation. Only
producers can round-robin each message. When a
distributed destination is used as a source destination,
you will need to configure a bridge per distributed
destination. Alternatively, you can enable
forwarding between the physical queues, which automatically
forwards messages from physical queues with
no consumers to physical queues that have consumers
(but the extra hop impacts performance). For more information,
consult the JMS documentation.
Tom
Rob McArthur wrote:
> I'm having some problems using Distributed Destinations with the Messaging Bridge in WLS 7.0sp2. Our configuration consists of the following:
> * WLS Server1:
> * JMS Server1:
> * inbound queue
> * outbound queue
> * JMS Server2:
> * inbound queue
> * outbound queue
> * WLS Server 2:
> * JMS Server3:
> * inbound queue
> * outbound queue
>
> A distributed destination is configured for the inbound and outbound queues.
>
> Two messaging queues are configured so that bridge from WLS JMS to Tibco JMS using the distributed destinations.
>
> Everything is working fine for the inbound, but we have found that the outbound messaging bridge is picking up messages from only one of the two JMS servers on the first WLS instance. When monitoring, it can be seen that there is no consumer registered against the second JMS server.
>
> Any suggestions?
>
>
-
When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation
And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
Error occured in Messaging bridge in weblogic to MQ Series
Hi,
I am trying to send the message from weblogic JMS to MQ Server Queue using Message Bridging. All the configuration has been done in both Weblogic and MQ Server. Once creating the bridge, i am getting the following error.
<Feb 22, 2006 9:37:18 PM GMT+05:30> <Warning> <Connector> <BEA-190032> << Weblog
ic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAl
locationException of javax.resource.ResourceException: Failed to start the connection on createManagedConnection.>
--Please give me the suggestion to fix this.
Thanks in Advance,
Sureshkannan NagarajanHi,
I am trying to send the message from weblogic JMS to MQ Server Queue using Message Bridging. All the configuration has been done in both Weblogic and MQ Server. Once creating the bridge, i am getting the following error.
<Feb 22, 2006 9:37:18 PM GMT+05:30> <Warning> <Connector> <BEA-190032> << Weblog
ic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAl
locationException of javax.resource.ResourceException: Failed to start the connection on createManagedConnection.>
--Please give me the suggestion to fix this.
Thanks in Advance,
Sureshkannan Nagarajan -
Error occured in Message Bridging in Weblogic to MQ Server
Hi,
I am trying to send the message from weblogic JMS to MQ Server Queue using Message Bridging. All the configuration has been done in both Weblogic and MQ Server. Once creating the bridge, i am getting the following error.
<Feb 22, 2006 9:37:18 PM GMT+05:30> <Warning> <Connector> <BEA-190032> << Weblog
ic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAl
locationException of javax.resource.ResourceException: Failed to start the connection on createManagedConnection.>
--Please give me the suggestion to fix this.
Thanks in Advance,
Sureshkannan NagarajanHello Priya
If u r loading thru flat file
1. Check the correct path in infopackage
2. Check if it is opened,if it is then close it and run package again
If loading thru R/3
1. Check DS is not opened in change mode
2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
3. Are you running init..then make sure no document is posted in R/3 side...
Thanks
Tripple k -
Message Bridge between WLS 6.1 sp3 and MQSeries 5.2
Hi,
I'm really struggling with getting the Message Bridge working with Weblogic 6.1
sp3 and MQSeries 5.2. Currently I have both installed on the same Windows 2000
machine. First I'll pose some questions that I have, then I discuss the error
I'm getting. Here are my questions:
1. With the jms-xa-adp.rar there is a ra.xml and a weblogic-ra.xml. Within the
ra.xml deployment descriptor there are config-properties for ConnectionURL, InitialContextFactory,
ConnectionFactoryJNDI, and DestinationType. If my MQSeries Queue is the source
jms destination bridge and my weblogic queue is the target jms destination bridge,
what values do I set for the listed config-properties? I can't seem to find any
documentation on what these values should be. Am I missing something? Do these
values even have to be set?
2. When I go to install a Weblogic instance to a different physical machine what
has to be installed in terms of MQSeries? So I'll have MQSeries on physical machineA
and Weblogic on a different physical machineB. I want machineA to forward all
messages placed on a MQSeries Queue to forward them to machineB where the weblogic
Queue resides. Does machineB also have to contain an MQSeries installation?
Or can I just grab the necessary libraries and jar files and place them on the
Weblogic machineB so they can be included?
3. Is it correct that if I distribute Weblogic onto one physical server and MQSeries
onto a different physical server that I cannot use Exactly-once quality of service?
Other notes:
1. I have the following patches installed for Weblogic 6.1 sp3:
CR081404_610sp3.jar
CR081511_61sp3.jar
2. Here is the commands I used to create my ConnectionFactory and Queue within
MQSeries:
def xaqcf(MQTestConnectionFactory) qmanager(QM_jeff)
def q(MQTestQueue) qmanager(QM_jeff) queue(default)
Okay...here is my error:
<21-Aug-02 11:08:34 ADT AM> <Error> <MessagingBridge> <Error occurred in bridge
"Messaging Bridge" during transferring messages (java.lang.Exception: java.lang.
reflect.UndeclaredThrowableException: java.lang.reflect.InvocationTargetException:
javax.resource.ResourceException: Error creating consumer or receiving message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1086)
at weblogic.jms.adapter.JMSBaseConnection.receiveInternal(JMSBaseConnection.java:774)
at weblogic.jms.adapter.JMSBaseConnection.receiveCommon(JMSBaseConnection.java:656)
at weblogic.jms.adapter.JMSBaseConnection.receive(JMSBaseConnection.java:811)
at weblogic.jms.adapter.JMSConnectionHandle.receive(JMSConnectionHandle.java:111)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrapper.java:60)
at $Proxy82.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1215)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:854)
at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
Has anyone see this error before? Here is part of my ra.xml file....I just put
these entries in to see what happens:
<config-property>
<config-property-name>ConnectionURL</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property value>file:/C:/Develop/app_servers/WebSphere/MQSeries</config-property-value>
</config-property>
<config-property>
<config-property-name>InitialContextFactory</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>com.sun.jndi.fscontext.RefFSContextFactory</config-property-value>
</config-property>
<config-property>
<config-property-name>ConnectionFactoryJNDI</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>MQTestConnectionFactory</config-property-value>
</config-property>
<config-property>
<config-property-name>DestinationJNDI</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>MQTestQueue</config-property-value>
</config-property>
<config-property>
<config-property-name>DestinationType</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>AdapterType</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>XATransaction</config-property-value>
</config-property>
Here is a snip of my config.xml:
<MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
Name="Messaging Bridge" QualityOfService="Atmost-once"
SourceDestination="Source JMS Bridge Destination"
TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
<JMSBridgeDestination
AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
ConnectionFactoryJNDIName="MQTestConnectionFactory"
ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
DestinationJNDIName="MQTestQueue" InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
Name="Source JMS Bridge Destination"/>
<JMSBridgeDestination
AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
ConnectionURL="t3://localhost:7001"
DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
InitialContextFactory="weblogic.jndi.WLInitialContextFactory" Name="Target
JMS Bridge Destination"/>
Any help would be greatly appreciated. Thank you in advance for your help.
Sincerely,
Jeff
I tried your suggestion and it worked!! The only thing is, it
makes the deployment of the resource adapter a little more
complicated. Now my customers are going to have to edit their
config.xml, instead of just dropping in the appropriate rar into
the applications directory. But one nice side affect of placing
the rar's in a different directory is it makes the Message
Bridge a little more stable. I was finding it to be very
unstable. One time I would startup my Application Server and
everything was fine, then I would shutdown. The next time I
started it up, I would get exceptions. I have yet to see that
behavior with this new configuration.
Thanks again for all of your help, it is greatly appreciated!!
Jeff
Dongbo Xiao <[email protected]> wrote:
>Looks like that somehow you have the adapter deployed
>multiple times, may not be intended. The cause is that
>everything in the application directory will be automatically
>deployed and all of them are added to the config.xml. During
>the next boot, those appear in the config.xml will be deployed and
>everything in the application directory too. As a result, the adapters
>are deployed twice. The complain about runtime mbean not found may
>mean the one that is overridden by the new one.
>
>The work around is not to put your adapters in the application
>directory, instead, put them in a different directory and point to
>the directory in your config.xml.
>
>Dongbo
>Jeff wrote:
>>
>> One more thing...
>> I noticed that the exception specified that it couldn't find
>> mydomain:Location=myserver,Name=jms-xa-
>> adp_Pool_1,ServerRuntime=myserver,Type=ConnectorConnectionPoolRun
>> time MBean, but what's interesting that if I run the following
>> java weblogic.Admin GET -type ConnectorConnectionPoolRuntime -
>> property ActiveConnectionsCurrentCount -url
>> http://localhost:7001 -username xxxx -password xxxx I get the
>> following output:
>>
>> {MBeanName="mydomain:Location=myserver,Name=jms-xa-
>> adp_Pool_3,ServerRuntime=myse
>> rver,Type=ConnectorConnectionPoolRuntime"{ActiveConnectionsCurren
>> tCount=0}}
>> {MBeanName="mydomain:Location=myserver,Name=jms-notran-
>> adp_Pool_2,ServerRuntime=
>> myserver,Type=ConnectorConnectionPoolRuntime"{ActiveConnectionsCu
>> rrentCount=0}}
>>
>> So from that...it looks like the MBean is there. Any ideas why it
>is not being
>> found?
>>
>> Thanks,
>>
>> Jeff
>>
>> "Jeff" <[email protected]> wrote:
>> >
>> >
>> >
>> >Thank you very much!!
>> >
>> >I tried your suggestions and created a general Queue Connection Factory
>> >within
>> >MQSeries. Then I setup my MQSeries JMS Bridge Destination to use
>the
>> >jms-notrans-adp.rar
>> >resource adapter. With this configuration, I can send messages to
>MQSeries
>> >and
>> >they get forwarded to Weblogic.
>> >
>> >But, if I create a XAQueueConnectionFactory within MQSeries I cannot
>> >get the bridge
>> >working at all. I realize that MQSeries has a bug with Transactions
>> >and remote
>> >servers, but I have MQSeries and Weblogic running on the same machine.
>> > I thought
>> >I could setup an XAConnectionFactory in MQSeries, set the MQSeries
>JMS
>> >Bridge
>> >Destination to use the jms-xa-adp.rar and specify Exactly-once QOS
>and
>> >it should
>> >work? I tried it and it didn't work. ( see attachment for weblogic.log
>> >showing
>> >exception ).
>> >
>> >Here is my config.xml:
>> > <MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
>> > Name="Request Messaging Bridge" QOSDegradationAllowed="true"
>> > QualityOfService="Exactly-once"
>> > SourceDestination="Source JMS Bridge Destination"
>> > TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
>> > <JMSBridgeDestination
>> > ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
>> > ConnectionURL="t3://localhost:7001"
>> > DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
>Name="Target
>> >JMS Bridge Destination"/>
>> > <JMSBridgeDestination
>> > AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> > ConnectionFactoryJNDIName="MQTestConnectionFactory"
>> > ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
>> > DestinationJNDIName="MQTestQueue"
>> > InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
>> >Name="Source
>> >JMS Bridge Destination"/>
>> >
>> >Again, thank you very much for your response. It helped me a great
>deal.
>> > Any
>> >thoughts on the above problem please foward them along.
>> >
>> >Oh...and to answer the question posed to me, yes the CR081511_61sp3.jar
>> >file is
>> >dated 8/13/2002
>> >
>> >
>> >Sincerely,
>> >
>> >Jeff
>> >
>> >Dongbo Xiao <[email protected]> wrote:
>> >>Please see my comments inline.
>> >>
>> >>
>> >>Jeff wrote:
>> >>>
>> >>> Hi,
>> >>> I'm really struggling with getting the Message Bridge working with
>> >>Weblogic 6.1
>> >>> sp3 and MQSeries 5.2. Currently I have both installed on the same
>> >>Windows 2000
>> >>> machine. First I'll pose some questions that I have, then I discuss
>> >>the error
>> >>> I'm getting. Here are my questions:
>> >>>
>> >>> 1. With the jms-xa-adp.rar there is a ra.xml and a weblogic-ra.xml.
>> >> Within the
>> >>> ra.xml deployment descriptor there are config-properties for ConnectionURL,
>> >>InitialContextFactory,
>> >>> ConnectionFactoryJNDI, and DestinationType. If my MQSeries Queue
>> >is
>> >>the source
>> >>> jms destination bridge and my weblogic queue is the target jms
>destination
>> >>bridge,
>> >>> what values do I set for the listed config-properties? I can't
>seem
>> >>to find any
>> >>> documentation on what these values should be. Am I missing something?
>> >> Do these
>> >>> values even have to be set?
>> >>>
>> >>
>> >>You DON'T have to do anything to the adapter deployment descriptor
>> >>files.
>> >>The values given there for the listed config-properties are just
>default
>> >>values.
>> >>The values configured in JMSBridgeDestination instances are the values
>> >>used to
>> >>override the default values in the dd file.
>> >>
>> >>> 2. When I go to install a Weblogic instance to a different physical
>> >>machine what
>> >>> has to be installed in terms of MQSeries? So I'll have MQSeries
>on
>> >>physical machineA
>> >>> and Weblogic on a different physical machineB. I want machineA
>to
>> >>forward all
>> >>> messages placed on a MQSeries Queue to forward them to machineB
>where
>> >>the weblogic
>> >>> Queue resides. Does machineB also have to contain an MQSeries
>installation?
>> >>> Or can I just grab the necessary libraries and jar files and place
>> >>them on the
>> >>> Weblogic machineB so they can be included?
>> >>>
>> >>
>> >>You don't have to install MQSeries on the machine that the WebLogic
>> >>server is running. You need the necessary libraries and jar files
>> >>though.
>> >>
>> >>> 3. Is it correct that if I distribute Weblogic onto one physical
>server
>> >>and MQSeries
>> >>> onto a different physical server that I cannot use Exactly-once
>quality
>> >>of service?
>> >>>
>> >>
>> >>That is correct and it is a MQSeries transaction limitation.
>> >>
>> >>> Other notes:
>> >>> 1. I have the following patches installed for Weblogic 6.1 sp3:
>> >>> CR081404_610sp3.jar
>> >>> CR081511_61sp3.jar
>> >>>
>> >>
>> >>What version of CR081511_61sp3.jar you have? You need the one dated
>> >on
>> >>8/13/2002.
>> >>
>> >>> 2. Here is the commands I used to create my ConnectionFactory
>and
>> >>Queue within
>> >>> MQSeries:
>> >>> def xaqcf(MQTestConnectionFactory) qmanager(QM_jeff)
>> >>> def q(MQTestQueue) qmanager(QM_jeff) queue(default)
>> >>>
>> >>
>> >>The only possible error I see here is that you create a xaqcf while
>> >your
>> >>bridge
>> >>is configured to have "Atmost-once" QOS. The bridge adapter will
>create
>> >>XASession
>> >>if the connection factory is xa because it knows nothing about QOS
>of
>> >>the bridge.
>> >>As I said, there is a limitation in MQSeries transactions, which
>prevent
>> >>the
>> >>transaction to happen between remote servers. Although the bridge
>does
>> >>not
>> >>start the the transaction in your case, but MQSeries xa connection
>> >>factory may
>> >>throw error when it detects the other side is remote. Having said
>that,
>> >>I am not
>> >>completely sure this is the problem caused the bridge to fail. I
>suggest
>> >>you use
>> >>a non-xa connection factory on the MQSeries side and see if the problem
>> >>goes away.
>> >>
>> >>> Okay...here is my error:
>> >>>
>> >>> <21-Aug-02 11:08:34 ADT AM> <Error> <MessagingBridge> <Error occurred
>> >>in bridge
>> >>> "Messaging Bridge" during transferring messages (java.lang.Exception:
>> >>java.lang.
>> >>> reflect.UndeclaredThrowableException: java.lang.reflect.InvocationTargetException:
>> >>> javax.resource.ResourceException: Error creating consumer or receiving
>> >>message
>> >>> at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1086)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receiveInternal(JMSBaseConnection.java:774)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receiveCommon(JMSBaseConnection.java:656)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receive(JMSBaseConnection.java:811)
>> >>> at weblogic.jms.adapter.JMSConnectionHandle.receive(JMSConnectionHandle.java:111)
>> >>> at java.lang.reflect.Method.invoke(Native Method)
>> >>> at weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrapper.java:60)
>> >>> at $Proxy82.receive(Unknown Source)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1215)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:854)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
>> >>>
>> >>
>> >>The latest patch CR081511_61sp3.jar (dated on 8/13/2002) will expose
>> >>more error
>> >>information.
>> >>
>> >>> Has anyone see this error before? Here is part of my ra.xml file....I
>> >>just put
>> >>> these entries in to see what happens:
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>ConnectionURL</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property value>file:/C:/Develop/app_servers/WebSphere/MQSeries</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>InitialContextFactory</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>com.sun.jndi.fscontext.RefFSContextFactory</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>ConnectionFactoryJNDI</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>MQTestConnectionFactory</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>DestinationJNDI</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>MQTestQueue</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>DestinationType</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value></config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>AdapterType</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>XATransaction</config-property-value>
>> >>> </config-property>
>> >>>
>> >>
>> >>As I said earlier, you are not supposed to change the adapter dd
>file.
>> >>
>> >>
>> >>> Here is a snip of my config.xml:
>> >>>
>> >>> <MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
>> >>> Name="Messaging Bridge" QualityOfService="Atmost-once"
>> >>> SourceDestination="Source JMS Bridge Destination"
>> >>> TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
>> >>> <JMSBridgeDestination
>> >>> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> >>> ConnectionFactoryJNDIName="MQTestConnectionFactory"
>> >>> ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
>> >>> DestinationJNDIName="MQTestQueue" InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
>> >>> Name="Source JMS Bridge Destination"/>
>> >>>
>> >>> <JMSBridgeDestination
>> >>> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> >>> ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
>> >>> ConnectionURL="t3://localhost:7001"
>> >>> DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
>> >>> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
>Name="Target
>> >>> JMS Bridge Destination"/>
>> >>>
>> >>
>> >>Your configuration of the bridge and bridge destinations look fine.
>> >
>> >>The last thing is that you have to put MQSeries stuff in your CLASSPATH
>> >>and PATH for starting the WebLogic server that the bridge is running
>> >>on.
>> >>
>> >>You can also turn on debug for more information.
>> >>-Dweblogic.Debug.DebugMessagingBridgeStartup=true
>> >>-Dweblogic.Debug.DebugMessagingBridgeRuntime=true
>> >>
>> >>
>> >>Thanks,
>> >>Dongbo
>> >
-
Hi
I am trying to configure a messaging bridge between weblogic 8.1 sp4 and jboss-4.0.2 on my local machine.
I have the bridge working for the following configuration:
Adapter JNDI Name: eis.jms.WLSConnectionFactoryJNDINoTX
Connection URL: jboss server URL with port
Initial Context Factory: org.jnp.interfaces.NamingContextFactory
Connection Factory JNDI Name: ConnectionFactory
Destination JNDI Name: queue/testQueue
and these jar's are in my weblogic class path:
[jboss_home]/client/jboss-common-client.jar
[jboss_home]/client/jbossmq-client.jar
[jboss_home]/client/jboss-system-client.jar
[jboss_home]/client/jboss-transaction-client.jar
[jboss_home]/client/jnp-client.jar
[jboss_home]/lib/concurrent.jar
[jboss_home]/client/log4j.jar
I have also deployed connector module jms-notran-adp.rar on my weblogic server.
I am using "Duplicate-okay" Quality Of Service and the bridge functions correctly.:^O
Now when I try to configure the bridge so that I can use "Exactly-once" Quality Of Service I use the following configuration:
Adapter JNDI Name: eis.jms.WLSConnectionFactoryJNDIXA
Connection URL: jboss server URL with port
Initial Context Factory: org.jnp.interfaces.NamingContextFactory
Connection Factory JNDI Name: XAConnectionFactory
Destination JNDI Name: queue/testQueue
and add these jar's in my weblogic class path:
[jboss_home]/client/jboss-common-client.jar
[jboss_home]/client/jbossmq-client.jar
[jboss_home]/client/jboss-system-client.jar
[jboss_home]/client/jboss-transaction-client.jar
[jboss_home]/client/jnp-client.jar
[jboss_home]/lib/concurrent.jar
[jboss_home]/client/log4j.jar
I also deployed the connector module jms-xa-adp.rar on my weblogic server.
The connection factory that I use for the weblogic destination is also "XA enabled".
The problem which I have is that no messages are transferred via the bridge and following error is printed out from the server :_|:
<2005/08/15 12:20:22 PM> <Error> <Connector> <BEA-190091> <Call to implementation of ManagedConnection.getXAResource in resource adapter with jndiName = eis/jms/WLSConnectionFactoryJNDIXA failed: java.lang.IllegalStateException: can only be called from server>
Could you please assist.
Thanks in advanceHi,
I am trying to do configure a bridge between weblogic 7.0 SP4 and JBOSS 4.0.3 SP1.
I have set the classpath as mentioned but I am getting an error
####<Apr 11, 2006 2:02:34 PM CEST> <Debug> <MessagingBridge> <DNI6> <dni6testser
ver> <ExecuteThread: '10' for queue: 'default'> <kernel identity> <> <200006> <M
essaging Bridge Debugging RUNTIME! Bridge WebOSSTEST Getting target connection>
####<Apr 11, 2006 2:02:34 PM CEST> <Warning> <Connector> <DNI6> <dni6testserver>
<ExecuteThread: '10' for queue: 'default'> <kernel identity> <> <190032> << Web
logic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > Resourc
eAllocationException of javax.resource.ResourceException: Failed to start the co
nnection on createManagedConnection.>
####<Apr 11, 2006 2:02:34 PM CEST> <Info> <MessagingBridge> <DNI6> <dni6testserv
er> <ExecuteThread: '10' for queue: 'default'> <kernel identity> <> <200043> <Br
idge "WebOSSTEST" failed to connect to the target destination and will try again
in 60 seconds. (java.lang.Exception: javax.resource.spi.ResourceAllocationExcep
tion: CreateManagedConnection Error: Failed to start the connection
at weblogic.connector.common.internal.ConnectionPool.makeResources(Conne
ctionPool.java:1009)
at weblogic.connector.common.internal.ConnectionPool.getConnection(Conne
ctionPool.java:1769)
at weblogic.connector.common.internal.ConnectionPoolManager.getConnectio
n(ConnectionPoolManager.java:191)
at weblogic.connector.common.internal.ConnectionManagerImpl.allocateConn
ection(ConnectionManagerImpl.java:25)
at weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMS
BaseConnectionFactory.java:126)
at weblogic.jms.bridge.internal.MessagingBridge.getConnections(Messaging
Bridge.java:764)
at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
java:930)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210)
-------------- Linked Exception ------------
javax.resource.ResourceException: Failed to start the connection
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBase
Connection.java:1273)
at weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnectio
n.java:357)
at weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:2
29)
at weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnect
ion(JMSManagedConnectionFactory.java:190)
at weblogic.connector.common.internal.ConnectionPool.makeResources(Conne
ctionPool.java:1002)
at weblogic.connector.common.internal.ConnectionPool.getConnection(Conne
ctionPool.java:1769)
at weblogic.connector.common.internal.ConnectionPoolManager.getConnectio
n(ConnectionPoolManager.java:191)
at weblogic.connector.common.internal.ConnectionManagerImpl.allocateConn
ection(ConnectionManagerImpl.java:25)
Does anyone have a solution -
Weblogic Message Bridge Producing Duplicate JMS Messages
We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
TIBCO version: 4.4.3 V5
WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
We are also seeing a lot of exceptions related to
<May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
Here is the message behavior when we send a single message:
Timelines
11:34:17 --> Message sent to TIBCO EMS queue
11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:17 --> WL MS1 says it got the message and committed the transaction
11:34:17 --> Message is visible in the JMS queue in the admin console
11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:31 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS2 says it got the message and committed the transaction
11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:54 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS4 says it got the message and committed the transaction
11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
11:34:31 --> TIBCO EMS receives an ACK from WL for the message
MS04
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-6A59E8FE76C4FC4CA149
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<193654.1306521294611.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
MS03
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
... 8 more
).>
####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>
MS02
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-679AF074F381152F047C
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<196075.1306521271386.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
... 2 more
).>
####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
MS01
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: false
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-72BC818FE2BB8C2655C6
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<195581.1306521257536.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
... 1 more
).>
####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>@Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
-- Does messaging work, without any exceptions, when only one bridge is active?
It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread...
I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too. -- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name].
Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message. -- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened).
Yeah we made sure it was a Queue. -- Can you post your bridge and destination stanzas from your config.xml?
Will try to do this shortly but have to strip out lot of information. -- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly).
We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced.
Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again…. -
Hello All,
I am trying to hook up 2 Queues as source and target destinations for the WLS8.1
Messaging Bridge[MB] functionality.
So when I send a message to Q1[source destination], the MB forwards the message
to Q2[target destination].
I have 1 MDB deployed and listening on Q2.
I verify the messages received via the admin console in wls8.1 as well as the
MDB I have deployed.
Thus, the MB works.
However, when I deploy a MDB on Q1 as well, the message is lost(not forwaded to
Q1 by the MB).
Assuming that the source destination is of type Queue, and this behaviour is expected,
I went to test with a Topic as source destination for the MB and a Queue as the
target destination for the MB.
However, I failed to receive any messages in the dest[Q2] via the MB.
This is with / without a MDB listening on the Topic[source destination].
One MDB is always listening on the Queue[target destination].
MB does not work.............
Can anyone help ?
TIA.
There is no native code specific to this use case, except
perhaps for IBM code, and I know of no issues.
Raja wrote:
> I have tested Messaging Bridge(jms-xa-adp.rar),Foreign JMS provider in WLS8.1-SP1
> on windows NT m/c.Can any body tell me whether there will any problem while setting
> up and running the same test on Solaris.
>
> Thanks in advance,
> Raja
-
WLS 8.1 SP5 Message bridge doesn't refresh connection after idle time out
Hi,
I am seeing in the log after enabling the debug flags that message bridge intermittently stops refreshing the connection without logging further info and causing a production failure.Bridge is forwarding the message from WLS 8.1..5 DQ to the remote MQ 6.0 queue.
Below is the snippet which doesn't come in the log which suggests that bridge stops refreshing the connection.
<BEA-200027> <Bridge "CASLDNSenderBridge" works in asynchronous mode and has not received messages for the predefined maximum idle time. The connections to the adapters will be interrupted and reestablished.>
The above message does appear everytime but intermittently it stops and the messages put after this leading to the exceptions.The bridge has been configured in asynchronous mode and the idle time out is configured as 60 secs.
Can somebody please let me know if there is any known issue with 8.1 SP5 where message bridge stops refreshing connection intermittently or how to debug this further.I would normally suggest raising the issue with support, but I recall hearing that 8.1 is nearing the end of its support cycle, so I'm not sure that's an option for you. Other options:
- try upgrading to a newer SP, or better yet, a new version of WebLogic
- try changing to synchronous forwarding
- examine thread dumps from when the bridge appears to be stalled
- post the exception that bridge is throwing when it tries to connect
- try patching MQ (the problem could be on the MQ side, and perhaps an older version of the bridge may not be fully capable of handling all of MQs minor quirks)
- write a program to (A) detect inactivity on the src destination, and (B) somehow restart the bridge and/or all of WL when this occurs
Tom -
MQ Series, Messaging Bridge, weblogic 7.0
Hi all,
I have seen other postings about this with some clues as to why I am having this
problem, but I still can't seem to resolve. I have already tried to gleen some
clues from the documentation that comes with the beta bridge to be used with 6.1
(wls_mqseries.pdf). Has anyone configure Weblogic 7.0 successfully with the new
Messaging Bridge? If so, could you summarize your steps and settings?
I used the JMSAdmin tool to bind the factory and queue objects and setup the destinations
on the WLS console, but the log keeps spitting out the following:
<Jul 26, 2002 11:28:21 AM EDT> <Warning> <Connector> <190032> << Weblogic Messag
ing Bridge Adapter (XA) > ResourceAllocationException of javax.resource.Resource
Exception: Failed to start the connection on createManagedConnection.>
javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
F
ailed to start the connection
at weblogic.connector.common.internal.ConnectionPool.makeResources(Conne
ctionPool.java:993)
at weblogic.connector.common.internal.ConnectionPool.getConnection(Conne
ctionPool.java:1762)
at weblogic.connector.common.internal.ConnectionPoolManager.getConnectio
n(ConnectionPoolManager.java:163)
at weblogic.connector.common.internal.ConnectionManagerImpl.allocateConn
ection(ConnectionManagerImpl.java:25)
at weblogic.jms.adapter.JMSBaseConnectionFactory.getSourceConnection(JMS
BaseConnectionFactory.java:97)
at weblogic.jms.bridge.internal.MessagingBridge.getConnections(Messaging
Bridge.java:699)
at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
java:899)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
<Jul 26, 2002 11:28:21 AM EDT> <Error> <Connector> <190006> <Error granting conn
ection request.>
<Jul 26, 2002 11:28:21 AM EDT> <Info> <MessagingBridge> <200042> <Bridge "MQ Ser
ies Bridge" failed to connect to the source destination and will try again in
55
seconds. (javax.resource.spi.ResourceAllocationException: CreateManagedConnecti
on Error: Failed to start the connection)>
I can only tell that at startup, WLS is trying to establish a connection. Question:
Connection to what? I haven't specified an MQ Series host or Queue Manager name
anywhere yet.
Thanks for your help,
Mike Wright
Tom,
Thanks. The white paper seemed to have the info I needed.
Now I just need to figure out why the lookup of the MQ objects return javax.naming.Reference
rather than the actual object. I do have the ibm jar files in the classpath.
Thanks,
Mike
Tom Barnes <[email protected]> wrote:
>Have you read through the latest integrating foreign providers white-paper?
> It is
>available on dev2dev, or you can find it here:
>http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.jms&item=9364&utag=
>
>Tom
>
>Mike Wright wrote:
>
>> Dongbo,
>>
>> I'm sorry, I didn't want to mislead you to think I didn't read the
>docs prior
>> to posting the question. I do have the bridge and both destinations
>defined.
>> Here are the settings I am using for the "source" destination.
>>
>> Name: MQJMS Bridge Destination Source
>> Adapter JNDI Name: eis.jms.WLSConnectionFactoryJNDIXA
>> Adapter Classpath:
>>
>> Connection URL: t3://10.9.0.21:9003
>> Initial Context Factory: weblogic.jndi.WLInitialContextFactory
>> Connection Factory JNDI Name: mqConnectionFactory
>> Destination JNDI Name: mqDestSource
>> Destination Type: Queue
>>
>> User Name:
>>
>> Using the JMSAdmin tool, I defined the connection factory and queue
>objects which
>> were bound to the JNDI tree, obviously.
>> In order to connect using the IBM connection factory, you have to get
>an instance
>> of it and call the setter methods to specify the host, port, mode,
>channel, etc.
>> etc. Is weblogic trying to make a connection to MQ Series? How would
>Weblogic
>> know these settings without specifying anywhere?
>>
>> IBM connection factory: com.ibm.mq.jms.MQQueueConnectionFactory
>> IBM Queue: com.ibm.mq.jms.MQQueue
>>
>> Thanks,
>>
>> Mike
>>
>> "Dongbo Xiao" <[email protected]> wrote:
>> >Please see my comments inline.
>> >
>> >"Mike Wright" <[email protected]> wrote in message
>> >news:[email protected]...
>> >>
>> >> Hi all,
>> >>
>> >> I have seen other postings about this with some clues as to why
>I am
>> >having this
>> >> problem, but I still can't seem to resolve. I have already tried
>to
>> >gleen
>> >some
>> >> clues from the documentation that comes with the beta bridge to
>be
>> >used
>> >with 6.1
>> >> (wls_mqseries.pdf). Has anyone configure Weblogic 7.0 successfully
>> >with
>> >the new
>> >> Messaging Bridge? If so, could you summarize your steps and settings?
>> >>
>> >
>> >Here is the online doc
>> >http://edocs.bea.com/wls/docs70/adminguide/msgbridge.html
>> >
>> >
>> >> I used the JMSAdmin tool to bind the factory and queue objects and
>> >setup
>> >the destinations
>> >> on the WLS console, but the log keeps spitting out the following:
>> >>
>> >> <Jul 26, 2002 11:28:21 AM EDT> <Warning> <Connector> <190032> <<
>Weblogic
>> >Messag
>> >> ing Bridge Adapter (XA) > ResourceAllocationException of
>> >javax.resource.Resource
>> >> Exception: Failed to start the connection on createManagedConnection.>
>> >> javax.resource.spi.ResourceAllocationException: CreateManagedConnection
>> >Error:
>> >> F
>> >> ailed to start the connection
>> >> at
>> >weblogic.connector.common.internal.ConnectionPool.makeResources(Conne
>> >> ctionPool.java:993)
>> >> at
>> >weblogic.connector.common.internal.ConnectionPool.getConnection(Conne
>> >> ctionPool.java:1762)
>> >> at
>> >weblogic.connector.common.internal.ConnectionPoolManager.getConnectio
>> >> n(ConnectionPoolManager.java:163)
>> >> at
>> >weblogic.connector.common.internal.ConnectionManagerImpl.allocateConn
>> >> ection(ConnectionManagerImpl.java:25)
>> >> at
>> >weblogic.jms.adapter.JMSBaseConnectionFactory.getSourceConnection(JMS
>> >> BaseConnectionFactory.java:97)
>> >> at
>> >weblogic.jms.bridge.internal.MessagingBridge.getConnections(Messaging
>> >> Bridge.java:699)
>> >> at
>> >weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
>> >> java:899)
>> >> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
>> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
>> >> <Jul 26, 2002 11:28:21 AM EDT> <Error> <Connector> <190006> <Error
>> >granting conn
>> >> ection request.>
>> >> <Jul 26, 2002 11:28:21 AM EDT> <Info> <MessagingBridge> <200042>
><Bridge
>> >"MQ Ser
>> >> ies Bridge" failed to connect to the source destination and will
>try
>> >again
>> >in
>> >> 55
>> >> seconds. (javax.resource.spi.ResourceAllocationException:
>> >CreateManagedConnecti
>> >> on Error: Failed to start the connection)>
>> >>
>> >> I can only tell that at startup, WLS is trying to establish a connection.
>> >Question:
>> >> Connection to what? I haven't specified an MQ Series host or Queue
>> >Manager name
>> >> anywhere yet.
>> >>
>> >
>> >As you can see from the doc I mentioned earlier, you have to configure
>> >the
>> >source
>> >and the target of the bridge (as two JMSBridgeDestination instances)
>> >and the
>> >bridge itself (as a MessagingBridge instance). In the JMSBridgeDestination
>> >instance,
>> >you have to specify a couple of attributes, including url, initial
>context
>> >factory,
>> >connection factory JNDI, destination JNDI and destination type.
>> >
>> >I don't know what you configured from the console, but the bridge
>instance
>> >tried to connect to the source destination. Again, I don't know what
>> >is the
>> >source
>> >you configured, therefore not sure if the bridge was trying to connect
>> >to
>> >MQSeries or WLS JMS.
>> >
>> >Hope this helps.
>> >Dongbo
>> >
>> >
>
-
When restarting server after a crash, Messaging bridges are not starting
Hi,
We have Messaging bridge configured with Exactly-Once QOS to read messages from IBM Websphere MQ to Weblogic distributed Queue. We are using Weblogic 10gR3.
1. We killed the weblogic server which was reading message from source destination(IBM MQ). We did this to check whether any message is lost when a server crashes.
2. Then we restarted the weblogic application server and checked the weblogic messaging bridge status.
3. The messaging bridge was not started properly and the following Exception was thrown.
####<Apr 22, 2010 4:09:11 PM BST> <Error> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-056A9014D88E2BE368B7> <> <12312323333> <BEA-200015> <An error occurred in bridge "BRIDGE" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:941)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:630)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1116)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:511)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:438)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy87.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
####<Apr 22, 2010 4:09:11 PM BST> <Warning> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271948951881> <BEA-200026> <Bridge "BRIDGE" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.jms.bridge.internal.MessagingBridgeException.)>
####<Apr 22, 2010 4:09:12 PM BST> <Info> <MessagingBridge> <machineA> <desb03-ms11> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271948952726> <BEA-200020> <Bridge "BRIDGE" is stopped.>
Please give your suggestions to fix this issue.
Thanks!
Edited by: user11340353 on 28-Apr-2010 06:34Hi,
*The server was started in warning mode and the JTA was declared unhealthy. I saw 2 transaction alive for more than 2000 seconds which is uncommon.
*The resource adaptor was started properly.
*We are using file store. But will it make a difference?
Thanks! -
Resource Allocation Issue in Weblogic messaging bridges
Hi,
We are using
Weblogic version à WebLogic Server 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358 WebLogic XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358 WebLogic Temporary Patch for CR250915 04/18/2006 22:21:33
Java JDK version à 1.4.2_11
Oracle version à 9.2.08
Solaris version à Solaris 5.8
The weblogic application is deployed on Unix Solaris.
We have configured 8 message bridges within weblogic between the 8 Topics in weblogic (source JMS destination) and 8 topics in the External EMS server (Target JMS destination) .
The properties set for the message bridges are
1] AsyncEnabled ="true"
2] DurabilityEnabled ="true"
3] QualityOfService="Exactly-once"TransactionTimeout="10"
4] TransactionTimeout="10"
The source and target JMS destinations are bridge using the resource adapter of jms-xa-adp (connector module)
The properties for the Source JMS Destination are
1] ConnectionFactory = weblogic.jms.client.JMSXAConnectionFactory
The properties for the Target JMS Destination are
1] InitialContextFactory = com.tibco.tibjms.naming.TibjmsInitialContextFactory
2] ConnectionFactory = XATopicConnectionFactory
The EMS client version library is EMS version client library à 4.2.0
The message Bridge Thread Pool Size is à 12
When the weblogic is started, all the bridges comes up properly and are forwarding message to the target, however after some time (1 to 2 days) we observe some that some of the bridges are going down and we get see following error in the weblogic logs
####<May 26, 2010 12:00:56 AM GMT> <Warning> <Connector> <ngun015> <zlw1rdbs12-a> <ExecuteThread: '6' for queue: 'MessagingBridge'> <<WLS Kernel>> <> <BEA-190032> << Weblogic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException of javax.resource.ResourceException: Failed to start the connection on createManagedConnection.>
####<May 26, 2010 12:00:56 AM GMT> <Info> <MessagingBridge> <ngun015> <zlw1rdbs12-a> <ExecuteThread: '6' for queue: 'MessagingBridge'> <<WLS Kernel>> <> <BEA-200042> <Bridge RefDataCompanyBridge failed to connect to the source destination and will try again in 60 seconds. (javax.resource.ResourceException: Failed to start the connection)>
Can you please help us resolve the above issue?
Thanks,
MohanrajThere seems to be couple of known issues with WLS 8.1 and Tibco EMS.. Check with support whether your issue is related to any of the below:
Message bridge will stop responding and WLS has to be restarted to overcome this.
There is a known bug on WLS 8.1. Bug 8062571 is for the issue.
Should the connection be interrupted by a problem on the Tibco side, the messaging bridge never tries to reconnect. the problem can be that Tibco EMS is restarted for some reason or that the maximum number of messages that Tibco EMS can handle is reached.
Unpublished bug8066979 is available for WebLogic Server 8.1 SP6 and later
Unpublished bug8172940 is available for WebLogic Server 9.2 MP2 and later
Note you can get more info about bridge problems by following the below steps:
To debug the bridge you can enable debugging for the messaging bridge using either of the followings methods:
* Add the following lines to your WebLogic start script (before the weblogic.Server line):
-Dweblogic.debug.DebugMessagingBridgeStartup=true
-Dweblogic.debug.DebugMessagingBridgeRuntime=true
* Add the following statements to the ServerDebug entry in your configuration file (config.xml) for the server that the messaging bridge is running on:
DebugMessagingBridgeStartup="true"
DebugMessagingBridgeRuntime="true"
Once debugging is enabled for the messaging bridge, the debugging messages are sent to the server log by default. However, if you want them to appear in the Administration Console, add “DumpToConsole” to the statements show above. For example:
-Dweblogic.debug.DebugMessagingBridgeStartupDumpToConsole=true
Edited by: atheek1 on May 30, 2010 5:19 AM -
Hi,
I've set up a messaging bridge between 2 Weblogic 8.1 SP5 boxes, and am getting the following generic error when it's trying to connect to the target. I've got bridge debugging on.
I've tried all the usual suspects: XA enabled connection factories, disabled certificate generation and set certificate to the same thing for both servers, disable guest is unchecked, connectors are deployed, etc.
This error message is useless...anyone have any ideas?
<Aug 16, 2006 2:56:24 PM IDT> <Debug> <MessagingBridge> <BEA-200006> <Messaging bridge debugging RUNTIME! Bridge bridge.test Getting target connection.>
<Aug 16, 2006 2:56:24 PM IDT> <Warning> <Connector> <BEA-190032> << Weblogic Messaging Bridge Adapter (XA)_eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException of javax.resource.ResourceException: Failed to start the connection on createManagedConnection.>The bridge just does a basic JNDI lookup, and there's nowhere to put additional parameters. However, you can do this using a "Foreign JMS Server".
Create a "Foreign JMS Server" either using the console, or by putting a ForeignJMSServer entry in config.xml. There is a "JNDI Properties" field, where you can specify your security credentials in name/value form (you'll need the values of those JNDI constants, which are "javax.jndi.something.something", not SECURITY_PRINCIPAL and SECURITY_CREDENTIALS.)
Then, have the bridge look up the "Local JNDI Name" from the Foreign JMS bean rather than the remote TIBCO JNDI object. (You do this by removing all the JNDI parameters from the bridge destination so that it uses the local JNDI provider, not the TIBCO JNDI provider.)
Essentially, by doing this, the Foreign JMS code in WLS is going to delegate the JNDI lookup to the TIBCO provider using all the JNDI parameters you specify, including security.
Maybe you are looking for
-
HELP! multiple ipods one itunes??
we have three kids who each have an ipod. can you have multiple ipods on one account or itunes program? ipod 4gen. 20gb,ipod nano 2g(x2)
-
Reg N sender 1 receiver scenario
Hi Experts, i have one basic doubt ,is it possible to have a scenario with multiple senders and one receiver without using BPM in a single interface.. Say we have a common sender structure for all N system. and one sender message interface,MM,IM a
-
In Yosemite, how to disable hyperthread ?
Hi ~~~ I use macbook pro 2011 late and yosemite. I already use disable hyperthread. But upgrade to yosemite, hyperthread is not dead In Win7 (bootcamp), hyperthread is still alive. I want to disable hyperthread. How do i do ? Please Let me know this
-
Keeping original image compression
I'm doing an online ad and for the first time really have to worry about file size (their limit is 35k!), so I spent a while in Photoshop saving the images I'm using to very small sizes without hurting the images noticably (one jpeg, one gif), such t
-
Hello My iPhone 6 64 GB keyboard is freezing while I am writing. I have updated from iOS 8.1.2 to iOS 8.1.3 but the problem still is not going. Also I have tried to reset all settings and there is no advantage. Please help