WL Cluster: install of weblogic is not working properly
Cluster install of weblogic is not working properly. We are getting kicked out every now and then
from the portal when both PIA1 and PIA2 nodes are up. When we shut down one meaning switch off clustering
then we are fine(Portal becomes very stable).
env setup:
Weblogic 9.2 with MP1-p5 and all the patches on Oracle Enterprise Linux 4 32 bit
PTools version - 8.49.08
Here is the message at the Kernel level if that any help:
Oct 7 10:43:22 hrrecweb01 kernel: Badness in local_bh_enable at kernel/softirq. c:141
Oct 7 10:43:23 hrrecweb01 kernel: [<c0121178>] local_bh_enable+0x3f/0x62
Oct 7 10:43:23 hrrecweb01 kernel: [<c02177b9>] skb_checksum+0x133/0x25e
Oct 7 10:43:23 hrrecweb01 kernel: [<c0250f36>] udp_poll+0x66/0x113
Oct 7 10:43:23 hrrecweb01 kernel: [<c02135e1>] sock_poll+0x19/0x1d
Oct 7 10:43:23 hrrecweb01 kernel: [<c016d777>] do_pollfd+0x42/0x7d
HRRECWEB01 is WebServer name
any thoughts? Is there a kernel variable or settings for linux that I need to set for
cluster weblogic install?
Thanks/Thaya
Kunal,
Have you tried clearing the browser cache?
-Arun
Similar Messages
-
I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
When will iTunes come to Ubuntu?See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter -
I have tried to and have installed itunes on my pc to download music to my nano i have had problems doing so i can not sync music for my computer file i have tried a different nano need to talk with a tech rep please provide a NUMBER FOR ME TO CALL
LCSO Wisdom wrote:
need to talk with a tech rep please provide a NUMBER FOR ME TO CALL
Then pick up the phone and call them.
Phone numbers can easily be found by clicking the "Contact Us" link at the bottom of every Apple webpage. -
SSL on weblogic is not working properly on IE8
Hi,
I have enabled SSL Port on weblogic and disabled NON-SSL port on weblogic....
and now when i run my jdeveloper application, my page is working fine with https but after running my application on https if i change it to http then also it is working after few refresh....
i.e my page is disabled with http....
but this issue is working fine on mozilla and IE9...
Please Answer this question.....What type of error you are getting, is this a certificate error ???
-
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process: iTunes [463]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.7 (10.7)
Build Info: iTunes-10702101~1
Code Type: X86-64 (Native)
Parent Process: launchd [273]
Date/Time: 2012-10-22 23:33:07.226 +0200
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report: 4918 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Anonymous UUID: 3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x102a96000 - 0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff62696000 - 0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .
Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp -
Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
SteveNone of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers. -
My trackpad is not working properly since installing the upgrade. What should I do?
My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?
i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type
-
HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7
After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing gamesThis board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help. -
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
Regards,
JADHi Sydness,
Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
Charles
Sydness wrote:
I reset my SyncServices and the calendar sync worked perfectly after that.
I followed the instructions found here:
http://support.apple.com/kb/TS1627?viewlocale=en_US
Mac OS 10.7.1 - MacBook -
I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?
I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up. -
i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
Flash Player installed but not working properly
I have Windows 7 64 bit, and run IE11.
I have Adobe Flash Player installed.
It works fine on my login (administrator) but my young Son can not watch video's, as it says Flash Player is not installed.
How do I fix this please?Flash Player has updated to 11.87.800.175 today; is it working better?
If not, what means "not working properly"?
Maybe you are looking for
-
Can someone help me with a weird itunes error?
while trying to launch itunes 7 i get an error message saying "this action is only valid for products that are currently installed." i tried to unistall itunes and it's missing the msi file and i also tried to update but it wont update because of the
-
Can I backup internal HD to external keeping a large file stored in ext.?
I have a file of over 100GB stored in the external and I need to backup my iMac's internal for safety but I'm new to this so don't want to end up deleting it... Also App suggested to do it? 500GB internal 1.5 TB external Thanks!
-
VO extensions error : ' You cannot access this draft quote '
Hi Oaf Experts, After extending VO iam getting one error in the page ' You cannot access this draft quote ', by removing the vo extension the error is going,but the error is not related my VO, it is a Standard Error. can anybody help on this issue. t
-
How can i automate importing certificates?
My company is using zScaler for web filtering and we are trying to figure out how we can import certificate into firefox. I have tried copying the cert.db from one machine to another but the problem is that the page only loads with text, which implie
-
Automatic workload reassignment of purchase order
Dear experts , My customer need an option for Automatic workload reassignment of purchase group . We have the rule to determine the purchase group against product group and the price in SC. Now, we need the possibility to change purchase group in cas