WL - MQ bridge in Exactly-Once mode not working

          I cannot get a message bridge from an MQ queue to a JMS queue to work in exactly
          once mode. I followed the directions in the 'Using Foreign JMS Providers with
          WebLogic Server' whitepaper (It works fine for atmost once). Once I configured
          weblogic correctly, I had a problem with made me think that I needed to use the
          class MQXAQueueConnection instead of MQQueueConnection as listed in the whitepaper.
          After that, I got an exception like 'XAResource not found.' Am completely stuck
          at this point.
          Does two phase commit actually work with WLS 6.1 and MQ 5.2 (?) ?

Does this help?
          http://edocs.bea.com/wls/docs61/faq/msgbridge.html#500395
          Doug McGrath wrote:
          > I cannot get a message bridge from an MQ queue to a JMS queue to work in exactly
          > once mode. I followed the directions in the 'Using Foreign JMS Providers with
          > WebLogic Server' whitepaper (It works fine for atmost once). Once I configured
          > weblogic correctly, I had a problem with made me think that I needed to use the
          > class MQXAQueueConnection instead of MQQueueConnection as listed in the whitepaper.
          > After that, I got an exception like 'XAResource not found.' Am completely stuck
          > at this point.
          >
          > Does two phase commit actually work with WLS 6.1 and MQ 5.2 (?) ?
          >
          >

Similar Messages

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

Widgets on my desktop using dev-mode not working in Lion

I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.

When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?

Blue screen on start up. Safe mode not working?

Blue screen on start up. Safe mode not working, any suggestions?

Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment).

Adding 3 Airport Extremes to Linksys WGT4400N in Bridge Mode Not working

I have a network that starts in a homerun closet and is expanded across 5 acres to differnet locations via CAT5e.
Homerun Closet has Linksys WGT4400N with Cat5e running to three different locations on property. The cables are within length limitations.
1st Airport Extreme N Running in Bridge Mode Connected and Working in Main House
2nd Airport Extreme N Running in Bridge Mode Connected and Working in Guest House
3rd Airport Extreme Replaced with new one Connected and Not Working in Office. This Airport Extreme N is configured just like the others but it cannot see the network. Cables Verified with Testers and Mac Pro at office location, works when ethernet cable is directly connected to system.
Not sure what is going on. IS there s limit to the number of Airport Extreme N's used as bridges?
I have 2 of ther working and the last is not. First Airport Extreme N for office was bad replaced.
Thank You
GldnSabre

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

Airport in bridge mode not working in Windows7

Hi everyone,
Last night as I was browsing the web on my iPad the internet stopped working...I am using an Airport Express router plugged directly into the wall socket of my apartment which was configured by the ISP.
I have been using this config for the past 7 months with no issues but last night it just stopped working and the yellow indicator started flashing.
I went into Airport utility and it tells me the Double NAT problem has been found (maybe the ISP changed something?)...and they suggest to change the Airport configuration to Bridge Mode ... said and done...now the Internet works fine under OSX and on my iPad but it does not work anymore in Windows 7.
Some of my family uses Windows 7 for some very specific apps and now it's just dead, internet does not work anymore.
Also, in OSX / iOS I didn't make any changes, I just changed the Airport configuration to Bridge mode and it worked right off the bat.
Has anybody else confronted such problems before ? If so, what would be the best way to fix this ?
Thanks!

" I tried trunk port also but it got disabled" <----- if your L2 config is not correct, nothing will work.
What is the setup on the switch ? Trunk or access vlan ?
What is the status of the interface ? up ? down ?
Do you see something in your arp table ?
Gilles.

ACE bridge mode not working

Folks,
I am trying to configure ACE in transparent mode and it is not working, i can browse to the servers directly,but when i try to hit the vip , I do not get any webpages, all keepalives are up and everything is in inservice.
hostname abc
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.2
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.3 any
class-map type http loadbalance match-any src1
2 match source-address 0.0.0.0 0.0.0.0
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-defaut
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 1.1.1.5

I made some progress, but still it is not working.
When the server behind the ACE module default gateway is set to the firewall, i can telnet to the vip at port 80,but i still do not see the page when i open the browser and point to the vip. here are the outputs.
hostname RBharti
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.3
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.5 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-default
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 202.137.232.193
Ri/Admin# sh service-policy
Policy-map : R-LB
Status : ACTIVE
Interface: vlan 3
service-policy: R-LB
class: VIP
loadbalance:
L7 loadbalance policy: Rediff-Policy
VIP Route Metric : 77
VIP Route Advertise : DISABLED
VIP ICMP Reply : ENABLED-WHEN-ACTIVE
VIP State: INSERVICE
curr conns : 0 , hit count : 54
dropped conns : 54
client pkt count : 81 , client byte count: 3888
server pkt count : 0 , server byte count: 0

Two Exact Functions Are Not Working (long)

I am making a portfolio website. The way I have structured my code is that I have an action layer that takes care of global actions such as how the user would navigate through the website. For each page of the website, I would have a seperate layer that would load the content of that page onto the screen. The content would be added as a movie clip which is attached to a scroll pane component.
I am having trouble calling one of my functions. What I am trying to do is that when the user navigates to 'My Work' section of my website, they can select from one of the examples of my works. Doing so will pop-up a movie clip which will display photographs and provide an explanation for my work. The problem I am trying to fix is that when the user tries to navigate to another page on my portfolio, the pop-up will not remove itself. I have created a function which is attached to the close button so if the user presses it, they can manually close the pop-up movie clip. I have also tried using this closing function with the main navigation buttons of my website so that when the user tries to go to another secion of the website with the pop-up open, the pop-up will automatically close itself, however, it is not constantly working. My 'works' page is seperated into several catagories (web, graphics...). This auto close function is only working on one of the five catagories and I do not understand why. I have copied everything exactly for one catagory to the second catagory, but Flash keeps on giving me the error that "Error #1009: Cannot access a property or method of a null object reference".
My flash files can be downloaded here. Once downloaded, you would want to open up website14.fla. I know my coding is not exactly organized, and I am sorry as this is my first time I have really used a lot of ActionScript at once. I'll try my best to walk you guys through my coding to my error.
To navigate through my website, you would click on the sink, toilet, or shower handles X amount of times. 1 time would bring you to 'about me', 2 for 'resume', 3 for 'contact', and 4 for 'work'. Once on the work page (press 4 times), click on the 'web' catagory and select one of the thumbnails. A pop-up window will appear. Don't close the pop-up window, and instead navigate to another page by pressing one of the handes a few times. Notice that the pop-up window automatically closes itself. Now navigate back to the 'work' page, click on the 'graphics' catagory and select a thumbnail. Now navigate to another page by pressing the handles a few times. Notice how Flash produces the error 'Error #1009: Cannot access a property or method of a null object reference'. In addition, notice how the pop-up window doesn't dissapear, and the new page is layed overtop.
To navigate in the Flash file to my error, I'll try to guide you there. In the root timeline, scroll over to Frame 1 Layer 'Action' and look at the actions panel. On line 72, I have two If statements checking for frames 30 and 31. These two frames are where my work is displayed. I have also used a try/catch statement to check for errors. Now going to frames 30 and 31 and clicking on the workContent layer and looking into the actions panel, I am bringing my movie clip onto the stage by using the function createScrollPane. The function createScrollPane is located in frame 1 in the Action layer on line 13. This function just takes the movie clip and wraps the scroll pane component around it. Going to frame 31 on the main timeline, select the workContent layer and pull up the actions panel to see the code. you will see that I am loading workGraphics_content movie clip onto the page. Find it in the library (content/content/workGraphics_content) and open it by double clicking on it. There you will see another movie clip (workGraphics_content2) fading from alpha0 to alpha1. Double click on it and look at the action script in frame one layer 'action'. On line 93, I have the function external_workFrame_exit which is called whenever the user navigates from the 'work' page to another page on the website. For some reason, Flash keeps on giving me an error whenever that function is called. Oddly enough if you scroll up to line 78 you will see the function workFrame_exit which is none the less exactly the same as external_workFrame_exit. workFrame_exit is called when the user manually clicks the closing X button on the pop-up window to close it. If you want, you can open up another movie clip (content/content/workWeb_content) and double click on that movie clip to open up workWeb_content2 and take a look at its action. Looking on line 86, I have the external_workFrame_exit function and this one is the exact same one as the external_workFrame_exit function (which works fine) found in workGraphics_content2.
What I am confused about is how I have two exact functions being called in pretty much exact same situations in the exact same way, and one of them fails to work. Is there a solution to my problem? Feel free to ask any questions if any of my explanations were difficult to follow.
Again, the flash files can be downloaded here. Once downloaded, you would want to open up website14.fla.

Sorry about the long post. I just thought that I would include all the details. To sum things up:
You navigate through my website by clicking the sink, toilet, and shower handle X amount of times. By clicking it 4 times you will end up on my 'work' page. My 'work' page has several categories. Select the 'graphics' category, click on one of the thumb nails and a pop-up will appear. Now navigate to another page without closing the pop-up by clicking on the handles. Notice how the pop-up doesn't go away, and the new content is displayed over top? Now if you go back to my 'works' page and click on one of the thumb nails under the 'web' category, then navigate to another page, notice how this pop-up goes away.
I am using the exact same functions to make both the 'graphics' category and the 'web' category to go away, but for some reason the 'graphics' one is not working.
Again, you can download my files from here.

Target Display Mode not working iMac 27(2012) Bootcamp to iMac 27(2013)

Hi All,
I recently purchased an iMac 27" 2013 which replaced my iMac 27" 2010.
===============
PREVIOUS SETUP
===============
(1) iMac 27" 2012 - Running Windows 8.1
(2) iMac 27" 2010 - Running OS X Mavericks
(1)+(2) were connected with a Mini-Display-Port cable.
(1) was using (2) as external display while (2) was set to Target Display Mode using CMD+F2
==============
CURRENT SETUP
==============
(1) iMac 27" 2013 - Running Windows 8.1
(2) iMac 27" 2012 - Running OS X Mavericks
(1)+(2) are connected with Thunderbolt cable.
(1) can't use (2) as external display anymore becuase CMD+F2 has no effect anymore on (2) in this scenario.
If (1) and (2) are both running OS X all works as expected.
I am aware about the support hint from Apple where they state TDM is not working under Bootcamp.
And I agree, while booted into Windows Bootcamp this machine can't serve as external display. Makes sense because TDM is baked into OS X display drivers.
Anyone had the same experience and came to a soltuion?
Thanks,
Martin

"Apple has no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows like there is for Display Port."
That is a little bit funny since Gigabyte and other big companies have said that 2014 is the year that they are going to implement Thunderbolt in many motherboards.
"GIGABYTE 7 series motherboards are the very first to offer fully certified dual onboard Thunderbolt™ ports. Capable of connecting up to 12 devices plus 3 digital displays simultaneously with breathtaking data transfer speeds that can transfer 1TB of data in only five minutes, GIGABYTE Thunderbolt™ motherboards offer the fastest connection interface on the desktop PC."
Have you asked Apple about that? I dont understand why Apple is crippling Thunderbolt on their devices...

Layout Mode not working in T-Code SQVI for some GUI

Dear Experts,
It has been found that the Layout mode is not working in T-code SQVI in some of our users Systems . The Layout Mode is working perfectly fine in some system though. If we select Layout mode in some system it is showing screens the same as in Basis Mode.
The GUI version is same in both the machines and both are having the same OS.
GUI Version : 710
OS : XP
Kindly suggest if any settings needs to be done in System or GUI so that all the systems get the same interface of Layout Mode as required.
- Jitesh

Hi experts,
Just wished to post the solution of the Issue raised by me...
I just needed to update my GUI Patch level available at market Place.
Thanks.
Jitesh

N95 8Gb USB Data Transfer Mode not working

I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
Regards

SOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though.

Printing in TUMBLE mode not working

hello,
I have the problem that the TUMBLE mode does not work in my program.
I have tested the printer with MS Word to be sure it works with my hardware and
it succeeded.
I use a DocPrint Object and specified the PrintRequestAttributeSet attributes OrientationRequested.LANDSCAPE and Sides.TUMBLE (=Sides.TWO_SIDED_SHORT_EDGE).
If I change this to Sides.ONE_SIDED, the printer correctly prints each pair of sides on 2 papers (one-sided).
If I change this to Sides.DUPLEX, the printer prints in DUPLEX mode correctly (TWO_SIDED_LONG_EDGE)
If I change this to Sides.TUMBLE, it still prints in DUPLEX !
If I use OrientationRequested.PORTRAIT, the printer prints always binding to the short side , like I need it (no matter if I switch to DUPLEX or TUMBLE).
What could be the reason that the program ignores the TUMBLE attribute ?
Here is my code:
public static void doPrint(Print printData) throws Exception {
                PrintService printer = null;
          printer = printerLookup(printerName);
          DocPrintJob job = printer.createPrintJob();
          DocFlavor flavor = DocFlavor.SERVICE_FORMATTED.PRINTABLE;
                Doc doc = new SimpleDoc(printData, flavor, null);
                PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
          aset.add(OrientationRequested.LANDSCAPE);
          aset.add(Sides.TWO_SIDED_SHORT_EDGE);
             job.print(doc, aset); //print
}

Yes, it's not a permission issue. And it only happens on this one machine too. No error messages in any of the log files. This is a real tough one. I'm tempted to think that it might be a graphics driver issue. The machine with the problem is a 2008 Mac Pro with a GeForce 8800 GT. So if anyone with a similar configuration could test it I'd at least have another hint for what's going on.
As an interesting sidenote, other capture applications like Voila work fine, which makes the graphics driver theory unlikely, but well, I'm running out of possible causes.
Thanks,
Jazz

Real-time apply in Maximum Performance Mode Not Working

We have configured physical standby database in maximum performance mode. It's working perfectly fine. Archive logs are being applied to the physical standby.
We can open the DB in read-only mode, but real-time apply is not working. Physical standby database is lagging behind the primary db by an archive log. As soon as primary database generates an archive log, it's transported over to the standby and applied immediately by the media recovery process. But real-time redo is not working. Standby redo logs have been configured.
On Physcial Standby:
SQL> alter database recover managed standby database using current logfile disconnect ;
Database Altered.
SQL> select group#, DBID, status,first_time, last_time from v$standby_log ;
GROUP# DBID STATUS FIRST_TIM LAST_TIME
4 UNASSIGNED UNASSIGNED
5 UNASSIGNED UNASSIGNED
6 UNASSIGNED UNASSIGNED
7 UNASSIGNED UNASSIGNED
SQL> select * from v$dataguard_stats ;
NAME
VALUE
UNIT TIME_COMPUTED
apply lag
+00 00:31:36
day(2) to second(0) interval 22-JUN-2010 08:42:06
transport lag
+00 00:31:34
day(2) to second(0) interval 22-JUN-2010 08:42:06
As you could see from the output above, value of transport and apply lag is equal to the elapsed time since last archive log switch.
********* Standby init.ora
db_name = CPRD
db_unique_name = CPRDS
instance_name = CPRD
service_names = hrDBSBY.WORLD
log_archive_format = CPRD%r%s.%t
log_archive_dest_1 = "location=f:\orarch\hresysprod"
log_archive_dest_2='service=hresysprod async db_unique_name=cprd valid_for=(primary_role,online_logfile)'
log_archive_config='dg_config=(cprd,cprds)'
fal_server=hresysprod
fal_client=hresysprods
standby_file_management=auto
log_archive_trace=1
log_file_name_convert = ('hresysprod','hresysprods')
db_file_name_convert = ('hresysprod','hresysprods')
remote_login_passwordfile = exclusive
******* Primary init.ora
log_archive_config='dg_config=(cprd,cprds)'
fal_server=hresysprods
fal_client=hresysprod
standby_file_management=auto
log_archive_format = CPRD%r%s.%t
log_archive_dest_1 = "location=f:\orarch\hrESYSPROD"
log_archive_dest_2='service=hresysprods async db_unique_name=cprds valid_for=(primary_role,online_logfile)'
log_archive_trace=1
remote_login_passwordfile = exclusive
Please advise.
Thanks,
jay

Hi,
In your case you are using ARC process for redo transfer as you have not specified any process in log_archive_dest_2 and default is arch.
I will suggest you to use LGWR to transfer the redo to standby and also check the size of standby redo logs on standby is same to the size of online redo logs on primary
Regards
Anudeep

Palm Drive Mode not working with Mac OS 10.4.9

Since upgrading to Mac OS 10.4.9, my Palm LifeDrive PDA does not work in Drive Mode (no hard drive icon appears when connected by USB). There were no problems in 10.4.8 or earlier. This issue has been mentioned by other users on the Palm Discussion forums but no solutions have been offered. Palm Tech support also seems to be in the dark (for now).
Does any one else have a similar problem and any suggestions/advice would be greatly appreciated?
MacBook Pro, 15" display, 2.33GHz, 160GB, 3GB RAM Mac OS X (10.4.9)

Yep. Found the same thing with my Tungsten T5. I even tried the trick that seems to be working for the TomTom guys by plugging it in through a USB 1.1 hub but that doesn't work either. It just locks up the Palm and I have to reset via the button on the back.
Apple doesn't seem to be doing anything from what I can see either as I've not heard of any proposed fixes from them on this.

Bridge CC file association default not working

Greetings.
I've recently upgraded to CC from CS6. Uninstalled and removed CS6 files properly (why have them on C:/ taking up space?).
Ps, Ai, Id, all working properly (thank my lucky stars...), which are the three apps I use daily,... and Br, however, Bridge CC is acting up it seems. Screenshots for your pictorial review.
Double-clicking on a JPG, PNG, TIFF, GIF image file within Bridge CC will result in,
Right-clicking, selecting to "Open With", and selecting "Window Photo Viewer 6.1 (default)" will produce the same result.
With Ps, Ai, and Id, double-clicking a '.psd', '.ai', and '.indd' will open in their respective app. However, when selecting to "Open With", and selecting either 'Photoshop' or 'Illustrator' will result in an errors (even tho' each app shows as default):
I've checked the default settings for the respective file types involved, in Bridge CC preferences,
—PNG, GIF, and TIF files are also associated to 'Windows Photo Viewer 6.1' as show below for JPG—.
and Windows 7,
It would appear that the file types are properly associated yet Bridge CC does not read/apply these settings.
It proved useless to uninstalled/re-installed Bridge CC. Windows Photo Viewer works perfectly fine as default in Windows 7 browser.
I've read that a solution could be to uninstall all CC apps, run some kind of cleaning process and re-install apps. I find solutions rather odd; plus, it takes h-o-u-r-s to download/install each app.
I'm stumped, not to mention quite annoyed. Any thoughts?
Thank you!

Thank you for your reply Curt Y, but I didn't foul anything; I followed standard procedures which I have umpteen times—prompts from the install/uninstall app which usually take place all on their own.
I read post 20, to which you referred me, however, after reading it, it appears that you may have misunderstood my situation; I'll try again, for everyone's benefit as well.
In Bridge CC:
Ps files (.psd) defaults to Ps CC when double-clicked and open in the app—no problem.
Id and Ai files also open to their respective default app—no problem either.
HOWEVER, and most interestingly, if I should "Open With" and select either 'Photoshop' or 'Illustrator", to open a '.psd' or'.ai' file respectively, I would get the errors,
While this is an issue I can work around it is not my main concern. My MAIN problem is opening JPG, PNG, GIF, BMP, and TIF files (thus far) in the Windows Photo Viewer (WPV), whose operation apparently is associated to the 'PhotoViewer.dll' file inside the Windows Photo Viewer folder.
Outside of Bridge CC the WPV works perfectly.
It is entirely absurd that one should have to launch an app (Ps, for example) every time one wants to simply view an image in a larger scale/window, such as in WPV.
It is also possible that one would want to open any of the file types listed above in Ps, for example, but as of now the "Open With" as I've described is not working properly—this I could live with.
In the end, having made the changes to the Ps string as described in "post 20", nothing has changed from my initial post.
And where would one make the appropriate string corrections for Ai?
I STILL cannot open JPG,PNG,TIF, GIF, and BMP files in Windows Photo Viewer from Bridge CC.
Thanks again.

WL - MQ bridge in Exactly-Once mode not working

Similar Messages

Maybe you are looking for