WLAN anchoring not working for BYOD and ISE?

Anyone set up 802.1x authenication (Radius/ISE) in lieu with wlan anchoring and got it working?
Looking in the docs doesn't give much clues why this fails, but web-auth and achoring works excellent on another wlan.
We need to move all BYOD devices to the datacenter for termination, so using anchoring would solve all our needs.
And yes, all interfaces and security settings are identical on all wlc's. The s/w is 7.0.116 and all controllers are 5508's
Isn't 802.1x and anchoring supported?
BTW - looking on the debug outputs it seems that the remote controllers do initiate radius auth instead of the anchor controller.
Any ideas?
Sincere Regards
/Mats

I was hoping that I did't have to open a TAC case regarding this issue.
Since the setup is very simple - a SSID with wpa2/aes and 802.1x and tied to a interface present and active an well as specific radius server for auth on both remote and anchor controller. The tunnel is up between remote and anchor. The anchor also terminates an SSID with web auth that works fine. Why doesn't this work?
Best Regards
Mats Nilson

Similar Messages

Skype number is suddenly not working for me and my...

Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls. Any ideas?
When I try to call my skype from my cell, it doesnt ring on either end. It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
This is the same for me and at least 2 of my colleagues. It was working all day, till suddenly it did not.
When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
When I call an outside number from skype, it connects.
Thanks for any help ASAP!

I think this might have been happening to me earlier. If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da". I was looking for an answer and google only brought stuff from like 2010. It's working now after an hour or so.
Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't.

My webcam is not working for skype and other appli...

Hello,
My webcam is not working for skype and other applications i have used tinychat and tango..i have updated all version of skype as you said in other topics but all of them is not working for me...my device name is vimicro usb 2.0 and i have accidently deleted that device now i have installed that device again but its not working i have seen all topics please help me ...
i will be very thankful to you

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

FormsCentral PDFs not working for Linux and Unix users

I recently created a PDF (using Indesign > Acrobat IX Pro > Formscentral [AFC]) that includes radio buttons, form fields, linked videos set to play in the PDF once clicked and (after running through AFC) a submit button.
The form has been distributed and we have already had hundreds of successful responses collected in the AFC site, all is working well there.
One major problem we are having is that we have a lot of Linux/Unix users and the response from them is that they can't activate the videos, the form fields are out of kilter alignmentwise and the submit button does not work. Even when using the proper Adobe Acrobat Reader (v9, for example).
Is the Adobe development team aware of problems such as these for Linux/Unix platforms and is there a suggested fix that they know of?
The link to the actual file is here: http://cms.iopscience.iop.org/alfresco/d/d/workspace/SpacesStore/b5a48eac-8642-11e2-8cf8-e 50acbc9fd86/NJP-Video-Abstracts-Competition-2013.pdf
Thanks in advance

Hi Jesse,
can you email me ([email protected]) the original PDF (before you imported it in FormsCentral)? Also, I'm curious about the format of the video in the PDF. Does the video in the PDF worked in Linux/Unix before going through the FormsCentral import/export?
When I look at your PDF on my Red Hat Entrprise Linux 6.0 system with Reader 9.5.4 it does look fine (location of the fields) but the video generate an error (which I'm still investigating). I have not yet try the submit button on your form (as I don't want to submit bad data to you) but I seem to have an issue with the submit button on other PDF forms I generated (when I try to submit from a linux machine). Still investigating that as well.
Gen

Skype Click to Call Not Working for Landlines and ...

Hello,
I am trying to use Skype Click to Call, but it does not seem to be working. I was able to call contacts using callto://CONTACT_NAME, but the second I try to call any mobile or landline number (I.E. - callto://9731234567), it does not work. Skype will come up, but it will not make the call. I am running on:
Windows XP - 2002 Version
4 core Pentium processor (1.7 GHz)
256 MB of RAM
Google Chrome
If anyone could provide any insight or ideas, I would really appreciate it. I have already tried a large number of things to fix this issue. Thank you so much for any help!

Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

Push mail is not working for gmail and hotmail on ...

i have been using my nokia e72 since february 2011. i had two mailbox configured, gmail and hotmail. Until last week, everything was fine. but suddenly my push mail stopped working for both gmail and hotmail.
when i noticed this, i removed both of my mailboxes and tried to create a new one. when trying to create a Gmail mailbox, it goes fine upto "downloading terms". after that, when i choose to connect to "nokia messaging service", it creates a mailbox named "HOTMAIL" instead of "GMAIL". it takes only my user name for Gmail and rest of the settings are for HOTMAIL.
if i choose not to connect to "nokia messaging service" then it works quite well. but thats not real push mail. it will check my email every 5 mins. but when tried to create a "HOTMAIL" mailbox, i had no luck. no matter how i try, hotmail mailbox can't download my mail. and as hotmail don't support IMAP, its very disgusting to use "POP3" if i choose not to connect to nokia messaging.
i have tried to reset the phone using *#7370# and *#7730#, but no luck. i also tried reinstalling the firmware using ovi suite, but i didn't had any luck either.
please help me, i am very disappointed with this kind of problem specially from nokia.
someone please do help. i m in a huge mess.

delete the account and re-add it.

Pinyin not working for Mail and some other APPs

Hi all,
Now the Pinyin panel (in which one chooses characters) does not show up at all when I try to use either built-in Pinyin simplified or Sougou Pinyin, in Mail and for example Tencent QQ.
It seems that there is no reaction whichever key I press. Cmd+space to switch methods always work.
However, all Pinyin input methods work in Safari and other cases in web browsing.
And the US English input works fine.
Does anyone have any ideas? Appreciate!
Cheers,
Yi

If you don't get an answer here, you can also try
https://discussionschinese.apple.com
or
https://groups.google.com/forum/#!forum/chinesemac

Adb sync not working for commsync and outlook connector after Patch 122793-

Hello,
I have opened the case 71038740 for this problem.
We have upgraded communication express:
v6.3-4.01 (Patch 122793-17,) ==> v6.3-11.01 (Patch 122793-24)
Communication Express seems to work fine but the adb
synchronisation for outlook connector and commsync does not work anymore.
The errors that we have are:
[13/May/2009:10:03:02] info (13176): for host 10.194.1.7 trying to
GET /abs/search.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR PagedSearchResultHdler.expand: couldn't
stop search: 6 : The parameter provided is invalid : stopSearch:
null searchID
[12/May/2009:19:01:59] info (13176): for host 10.194.1.7 trying to
GET /abs/s
earch.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR
PagedSearchResultHandler.expand: searchBook returned: 2 : Invalid
entry : psea
rchBook: invalid bookEntryID
Looking at a specific session we also have:
13/May/2009:10:49:21] info (13176): for host 129.194.17.75 trying
to POST /wabp/get_servertime.wabp, service-j2ee reports: PWC1412:
WebModule[] ServletContext.log():TRACE Warning:getDBHandler - Can't
open Personal Store : DBHandler: couldn't open configuration file at
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch : PropertyReader: config is
not a file:
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch/personalstore.properties
It looks like it is trying to opening
domain/unige.ch/personalstore.properties instead of
domain/personalstore.properties.
From what I see, we did not have this error in the previous version.
What is weird, that adb seems to work fine in uwc web interface.
I add the http dialog for the ones who may help me to debug:
POST
/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=510312&fmt-out=text/xml
HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: webcalendar.unige.ch
Content-Length: 35
Connection: Keep-Alive
Cache-Control: no-cache
username=xxxx&password=yyyy%2BtempoHTTP/1.1 302 Moved Temporarily
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Cache-control: private
Location: http://xxxx.unige.ch/
Set-cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9; Path=/
Content-length: 0
Content-type: text/html
GET / HTTP/1.1
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
User-Agent: XCPCSync
Host: xxxx.unige.ch
Connection: Keep-Alive
Cache-Control: no-cache
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Content-type: text/html;charset=ISO-8859-1
Content-length: 157
<script>
window.location="/auth";
if (window.location.protocol != "https:") {
window.location = "https://" + window.location.host;
</script>
POST /wabp/get_servertime.wabp?now=515546&fmt-out=text/xml HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: xxx.unige.ch
Content-Length: 0
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:20 GMT
Content-type: text/xml;charset=UTF-8
Transfer-encoding: chunked
5c
<?xml version="1.0" encoding="UTF-8" ?>
<wabp errorcode="0" servertime="20090513113720Z" />
0

Here is the debug log from the communication:
56:21 Open sync engine
56:21 Client login date/time : 15.05.2009 08:56:21
56:21 Version : 2.0
56:21 Version 3.1.2008062313 (EN)
56:21 Built from: /trunk
56:21 Product ID: 209-101
56:21 User: XXXX
56:21 Company: UNIGE
56:21 day 15 : hour 6 : min 56 : DST 0 : GMT (Greenwich Meridian Time)
56:21 day 15 : hour 8 : min 56 : DST 1 : Local time
56:21
59:17
59:17 Performing Normal Sync of 'Contacts'. Sync Status before performing synchronization:
59:17 App1 : 'Contacts', Trans1 : 'Sun'. App2 : 'Contacts', Trans2 : 'MSOl'. ContractId : 131073 , App1Id : 6 , App2Id : 9
59:17 Status before Sync - SrcRecId : e1213fd3c71c35d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC5644612000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : 20090514155311Z , DstModInfo : 2009/05/14 15:52:08
59:17 Status before Sync - SrcRecId : e11dba338af2e2d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56843B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b44e2e , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56643B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338ab0e2c , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56443B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338bbae30 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56243B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338c03e31 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56043B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b80e2f , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56E43A2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Enter CWABP::SendCmdToServer
59:17 CWABP::SendCmdToServer - https://xxxx.unige.ch:443/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=743093&fmt-out=text/xml
59:18 CWABP::SendCmdToServer - Post success Response:
59:18 Exit CWABP::SendCmdToServer
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name errorcode
59:18 Non zero error code returned in WABP
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name rawmsg
59:18 The errorMsg returned is :
59:18 Exit CWABP::CheckErrorCode -Error = .
59:18 Exit CWABP::Login. Error =
59:18 CRSunTransContact::LoginWABP - Unable to login
59:19 Enter CSunTransUtil::Configure
59:21 Enter CRSunTransBase::GetFirstErrorMessage
59:21 Exit CRSunTransBase::GetFirstErrorMessage
59:21 Enter CRSunTransBase::GetNextErrorMessage
59:21 CRSyncUtil::FeedProfileShim2Trans : SetTranslatorProfile Not Supported
59:21 CRSyncUtil::FeedProfileShim2Trans : returns 0
59:21 CRSyncUtil::LogFatalTransError : 'GetFirstNewId()' API of 'Sun' translator for 'Contacts' application returned empty error
59:25 Sync completed at 08:59:25 AM on 05/15/09

Action Script 3 code not working for start and stop button?

Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
Here is my code and the errors I am getting when I press the play and stop button on test-
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
function startCircle(e:MouseEvent):void{
    circle.play();
function stopCircle(e:MouseEvent):void{
    circle.stop();
green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
red_btn.addEventListener(MouseEvent.CLICK, redCircle);
function greenCircle(e:MouseEvent):void{
    circle.play();
function redCircle(e:MouseEvent):void{
    circle.stop();
Here are my output errors-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at exercise2_fla::MainTimeline/redCircle()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at exercise2_fla::MainTimeline/greenCircle()

ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle.

How do I fix my volume when ringing it works but it does not work for games and movies

How do I fix my phone volume it works when the phone rings but for all the other things the volume does mot work for example games and other sounds don't work.

Hm, it sould like liquid damage to me.

CSS Menu drop down part not working for ie8 and flashing shut on iPhone 5 browser

My CSS drop down menu will not show up in ie8 and flashes then shuts on iPhone 5 browsers (responsive design)..using code from a themeforest template. I am using CSS (HTML only) in the BC menu system. without further adieu here is the code.
HTML (I removed the BC javascript)______________________
<div id="navigation">
<ul>
<li><a href="/index.htm">Home</a></li>
<li><a href="/about">About</a>
<ul>
<li><a href="/leadership">Leadership</a></li>
<li><a href="/giving">Giving</a></li>
<li><a href="/careers">Careers</a></li>
<li><a href="/contact">Contact</a></li>
</ul>
</li>
</ul>
</div>
CSS______________________
#navigation {
float: right;
#navigation ul, #navigation li {
list-style:none;
padding:0;
margin:0;
display:inline;
#navigation ul li{
float:left;
position:relative;
#navigation ul li a {
font-family: Arial, sans-serif;
display: inline-block;
color: #888;
padding: 40px 6px 10px 6px;
margin: 0 5px;
text-decoration: none;
font-size: 14px;
border-bottom: 3px solid transparent;
#navigation ul li a:hover{
border-bottom: 3px solid #555;
#navigation ul ul {
opacity: 0;
margin: -3px 0 0 5px;
filter: alpha(opacity=0);
position: absolute;
top:-99999px;
left: 0;
background: #fff;
border: 1px solid #dddddd;
border-top: 3px solid #555;
z-index: 999;
#navigation ul ul li a:hover {
border-bottom: 1px solid #ddd;
#navigation ul ul li a {
padding: 8px 0;
display: block;
width: 130px;
margin: 0 16px;
font-family: Arial, sans-serif;
font-weight: normal;
font-size: 12px;
border-bottom: 1px solid #dddddd;
border-top: 1px solid transparent;
#navigation ul ul ul {
position:absolute;
top:-99999px;
left:100%;
opacity: 0;
margin: -3px 0 0 0;
z-index: 999;
#navigation ul ul ul li a {
border-bottom: 1px solid #dddddd !important;
border-top: 1px solid transparent;
#navigation ul ul li:last-child a, #navigation ul ul li:last-child a:hover {
border-bottom: 1px solid transparent
#navigation ul ul ul li:last-child a {
border-bottom: 1px solid transparent !important
#navigation ul li:hover>ul{
opacity: 1;
position:absolute;
top:99%;
left:0;
#navigation ul ul li:hover>ul{
position:absolute;
top:0; left:100%;
opacity: 1;
z-index:497;
background: #fff border: 0;
#navigation ul li:hover > a {
color: #444;
#navigation ul ul li:hover > a {
border-top: 1px solid transparent;
color: #444;
#current {
font-weight: bold !important;
color: #444 !important;
border-bottom: 3px solid #555 !important;

Well to show the menu it runs off opacity, Opacity is not cross browser and IE8 as you noticed will not work with it.
This menu method of a CSS menu is also not mobile friendly.
You will need the MS filters to work in older IE's
http://css-tricks.com/snippets/css/cross-browser-opacity/

Ios 7.1 led flash point in not working for sms and push

After the update to ios 7.1 the LED flash no longer works for text messaging.

It only works - for any alert - when the screen is locked.

Push notifications not working for Facebook and Tw...

Normally if I'm using an app, or doing something else with the phone, and a pop-up notification of an SMS, email or IM appears, I simply click it an it takes me to the app/conversation. However, this is not the case for my Facebook and Twitter notifications. The notifications do pop-up, but, when I click it nothing happens. It does not take me to the app. If I click the pop-up, the notification doesn't show on the events screen, as if I clicked it before. I can click Facebook and Twitter notifications on the event screen an it takes me to the app, just not with the push/pop-up notifications. Its really annoying sometimes. Thanks in advance.
Regards,
Arun Lall

Hi arunakajacob,
Welcome to the Nokia forums.
This will most likely be a bug in the application. Delete the application and reinstall it via Nokia Store > My Stuff.
If this doesn't fix it, a reset maybe necessary should. Make sure you make a back up with Nokia Link. You can find out how to back up using Nokia link on the below link:
http://europe.nokia.com/support/product-support/nokia-link
Once backed up you can reset your device with instructions on the below link:
http://europe.nokia.com/support/product-support/n9/user-guide?ccf_name=nokia-n9/guide/GUID-6D73C105-...
Once the phone has rebooted, reconnect it to Nokia link and restore your device:
http://europe.nokia.com/support/product-support/nokia-link/faq#03
To check for updates please refer to the following link:
http://europe.nokia.com/support/product-support/n9/user-guide?ccf_name=nokia-n9/guide/GUID-1BC62312-...
Let me know if this doesn't work so that I can troubleshoot further, if necessary.
Iris9290
Moderators notes: Message re-written to reflect accurate information for the N9 and Nokia Link as pointed out bty @SeanBangkok.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Logic Studio: Software Update not working for Compressor and can't download

I'm a Logic Studio customer. The 3.0.2 update isn't working from Software Update. I've tried to download the installation file separately, but it looks like you need a Final Cut Studio SN to download. Compressor is part of Logic Studio, so we need to be able to update also - without relying on Software Update. Thanks guys

Hello there Brad,
I was thinking it might be a good idea to delete and re install the iMovie and iPhoto applications from the Mac App store.
First find the apps in your Applications folder in finder, and move them to the trash and restart your computer.
Then use this article to re download them from the Mac App Store.
Mac App Store: Finding your purchased apps
http://support.apple.com/kb/HT4483
Apps purchased via the Mac App Store
When purchased via the Mac App Store, apps are installed in the Applications folder. Icons for purchased apps are automatically placed in the current user's Dock. There is also a purchases tab in the Mac App Store where you can see all of your Mac App Store downloads.
Cheers,
Sterling

WLAN anchoring not working for BYOD and ISE?

Similar Messages

Maybe you are looking for