WLAN AP group issue

Hi all:
I just set up 10 vlan interface and 10 AP groups for each vlan by only One SSID.
But it's didn't work for me.All the client cannot get IP and even prompt a wep key enter .
I set up something as below :
1.set up AP group and assign vlan interface and SSID to each ap group
2.Assign the AP group to each AP i want.
3.Set up 1 SSID and use the managment interface.
I don't know what step i miss or anything wrong with me .
anyone have any ideal , please tell me .
Thanks a lot!

Hi fella5 :
First , Thx your idea.
All vlans configured to the switch and all the Layer3 interface configured for each one .
DHCP scope work fine .
The PC client can associate to the AP successfully when i change the interface to other vlan at WLAN interface.But the AP group just not work.
by the way , would you mind tell me how i can assign the ap group to each radio ?

Similar Messages

  • Report with grouping issue

    I have a report which have year(2008), Category(0-1,2-3, ALL), product(0,1,2,3,4..), % sales. I group by all the category elements and called it as All, I am not getting the right percentage sales for the Category ALL other wise for 0-1,2-3 i am getting it right. Please advise where i am doing it wrong. please find the blog for a screen shot of my issue.
    http://ravibiblog.blogspot.com/2012/04/report-with-grouping-issue.html
    Thanks,
    RC

    Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
    FARXPBSH Failing With "Program was terminated by signal 11" or "Program was terminated by signal 10"          (Doc ID 742729.1)
    Publishing RXAPPYAC: The FARXPBSH Ends With 'Signal 11' Error          (Doc ID 432797.1)
    RXi RX Reports Failing With Program Was Terminated By Signal 10 or 11 Errors After FA Rollup Patch 6          (Doc ID 737963.1)
    Program was Terminated by Signal 11 when Running Rxi Reports          (Doc ID 559425.1)
    HTH
    Srini

  • Sorting /Grouping Issue: Single Artist Compilation Album Doesn't Group

    iTunes 8 Sorting / Grouping Issue
    EXAMPLE
    • Album: Essential Willie Nelson
    • There are 22 songs on this Disc
    • 19 of them are labelled "Willie Nelson" in the artist field
    • 3 of them are lebelled "Willie Nelson Feat. Waylon Jennings" in the artist field
    PROBLEM
    • Album will not stay grouped together when in the standard "Sort by Artist" in Grid View. A very legitimate expectation to be able to have Willie's name listed along with his pals in the artist field and have them grouped together in one album within Willie's albums section. 19 songs group within one album in the Willie Nelson section and the other 3 are placed separately either in the compilation section or as separate albums within the regular artists grid view.
    I've read most if not all postings that suggest solutions but no matter what... they don't work. The only way that I know to work is to strip out all other names and leave only "Willie Nelson" in the Artist field. All other sorting and grouping options don't work for this issue... I've tied every combination. My opinion is that this is just a limitation at this time and there is no solution until future updates. I don't want a cheezy work-around either, that's very "unApple like". I assume it to be fixed in future updates.
    Bueller... Bueller?
    Anyone?

    There's a few other "goodies" I have found also but haven't had time to check out.
    If you have songs not in iTunes that you want to add to iTunes in a different format than the song is in...
    (This is carried over from at least 7.4)
    Set the Importing prefs to what you want the new file to be.
    Hold the Option key and go to menu Advanced and select *Convert selection to* AAC (or whatever is in the Import prefs}.
    This will add it to iTunes in the new format.
    Previously, you had to Import the file, change the prefs, go to Advanced - *Convert selection to*, convert the file, then delete the original from iTunes.
    This is new...
    In iTunes 8, go to to File - > *Show duplicates*. (moved from View menu).
    Now hold Option and go to to File and it now displays *Show exact duplicates*.
    Don't know what it means by *exact duplicate* though.

  • Group Issue

    HI Gurus,
    My client is following this scenario.It has make to Order scenario and so many subcontracting process is done by the client.
    The scenario is like,multiple work Orders are sent to Subcontract Vendor through single Group Issue.
    For Example: 5 different work orders have the same processing work and has to be carried out by SC vendor X.
    What they are doing, they donot issue the materials to the same SC vendor 5 times instead they make a group of the work Orders and issue the materials to SC at a time.
    How can we map this into SAP????????
    Thanks & Regards
    Pranaya

    Hi
    In MB1B , you can club all the PO's & issue the Goods to the SC vendor.
    Goto MB1B, enter movemnt type 541, Click on To Purchase order & enter the PO & item details. Now adopt the details & issue the Goods to SC vendor.
    Thanks & Regards
    Kishore

  • WLAN 4400 - Trunking issue

    Hi all,
    We are having an issue setting up a truck port for the 4400 to our 2950 swithes.
    The setup will work fine without vlan tagging. The WLAN controller can ping the switch and our network.
    When I configure trunking on the switch, the connection drops.
    I have configured the Gi 0/2 port with the below commands
    interface gi 0/2
    Switchport trunk allowed vlan 1-10
    switchport mode trunk
    No shut
    Modifying the WLAN 4400 I set the management interface tagged for vlan 2.
    This breaks the connections between the WLAN controller and the switch.
    Can you advise where I may be going wrong and how to rectify.

    Hi fella5 :
    First , Thx your idea.
    All vlans configured to the switch and all the Layer3 interface configured for each one .
    DHCP scope work fine .
    The PC client can associate to the AP successfully when i change the interface to other vlan at WLAN interface.But the AP group just not work.
    by the way , would you mind tell me how i can assign the ap group to each radio ?

  • Grouping issue vouchers items in an invoice

    Hi all
    I'm developing an inventory and sales system , I have a master detail form for issue vouchers issued to customers, the master block contains the columns voch_no (issue voucher no) and the customer_no from issheads table and the detail block contains voch_no, stock_code,quantity and price colums from isslines table.
    Each customer may have more than one issue voucher, and each issue voucher may have more than one item.
    I have another form, the invoice form (also a master detail just like the issue voucher).
    What i hope to do is when the user creates a new invoice for a specific customer, he shouldn't create the invoice items himeself, but he should select some issue vouchers that belong to that customer (better to be multi select), then the invoice items will be created automatically to get the sum(quantity) grouping a line for each item by stock_code,price.
    The issue voucher numbers related to each invoice should be saved in a table for later updating.
    my question is :
    1-Should i create a new table that contains all the nmbers of the issue vouchers related to the invoice no ?
    2- how can i handle this in forms builder ?, should i create a new form, or can i achieve this in the invoice form itself and how?
    Please help

    Thank you!
    You're probably right, I might be talking about a feature of the sistem I'm using. Actually I'm not sure if I have access to database but probably not, I work at Xerox in Brasil and would like to know a little bit more about Oracle, with out have to ask my boss all the time. I work with record receipts of different species have lost much time trying to find repeating items on invoices. Sometimes we have interface issues, some items don't go to WIS (warehouse information system) after it registers on Oracle, so we have the physical part but it's not in the report storage
    My boss once told me he would teach me a way to see items of an invoice (repeting or not) after it registers on Oracle, but he is too busy, so I'm trying to find out by myself. If it helps, the systems responsability is Oracle applications - OSPD and my security group is standart.
    I'm sorry if my english is not that good I feel that my words seem a little confusing to you...
    Did you understand what I mean? Hope you did, and hope you can help.
    Thanks once again for your interest in helping me I really aprecciate it.
    Regards,
    Maria Carolina.

  • AD security group issues in SharePoint 2013 Integrated Mode

    Hello,
    Sorry if this is the wrong forum, I'm not sure if this is a SharePoint issue or a Reporting Services configuration issue (or if it should be in a SharePoint forum regardless).
    I have SSRS2012 on SharePoint 2013 in integrated mode. We are doing item level permissions, which means we have an AD security group Reports-All with
    Read to the Reports document library, then each actual report has unique permissions. We have a report with the ProjectManagers AD
    security group on it with Read (plus some other stuff to let them manage subscriptions), and another AD security group ProjectUsers with
    just Read access so they can open the reports. The data source used by this report has the AD security group I mentioned before, Reports-All,
    with Read.
    At a SharePoint level, things appear to work. When a user in ProjectManagers or ProjectUsers browses
    to the library, they see only the 3 reports that those two security groups have permission to see (out of a lot more in the library). That means SharePoint is reading those security group memberships correctly as far as I can tell.
    The issue is when a user in ProjectManagers or ProjectUsers clicks
    on a report, they get a reporting server based error message, and the ULS logs have an error specific to the user trying to run the report.
    Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'MyDomain\MyUser' are insufficient for performing this operation. (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo)
    If I add that specific user with Read permissions to the report and the data source, they are then able to run the report without errors. It seems like some Report Server component is not liking the fact that I'm using security groups. 
    Has anyone seen this behavior with AD security groups? Any ideas on why my environment does not want to work properly with those even though AD security groups are working fine for other non-Reporting Services files?
    Thanks,
    Aaron

    Hi aaronzott,
    According to your description, you configured SSRS 2012 of SharePoint integrated mode. You added read permission to reports and data source to AD security group Reports-All, then added just read permission to ProjectManagers and ProjectUsers groups. When
    users in ProjectManagers or ProjectUsers groups click report, the error message occurred. After you added Read permissions to the report and the data source to the groups, they can preview the report without errors.
    Report definition permissions are defined through List permissions on the library that contains the report, but we can set permissions on individual reports if we want to restrict access. Set properties on a report including data source connection information,
    processing options, and parameter properties. Edit Items on the library that contains the report or on the individual report. We also need to have view permissions on a shared data source (.rsds) to select it for use with the report.
    For more information about Set Permissions for Report Server Operations in a SharePoint Web Application, please refer to the following document:
    http://msdn.microsoft.com/en-us/library/bb326286(v=sql.110).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.

  • Grouping Issue - Siebel related

    Hi All,
    Am facing an issue in one of the reports. Below is the scenario.
    I need to group my Contact list report on "Country" field which is not a direct field in Contacts. It is coming from another Business Component in Siebel which is "Personal Address".
    This is not working. But when I try to group the report based on a field which is a direct field from Contacts, it is working fine. (Ex: Contact Name)
    Am unable to achieve this. Kindly help me with this.
    Thanks in advance,
    Imtiaz.

    Since your country details are under contacts, use the correct path for regrouping.

  • Outlook 2010 Contact Group Issue

    We have a Public Folder Distribution List (Contact Group) that is accessible to several users. There are two significant issues:
    When changes are made to the list, they are not always saved. For example if I enter a contact "Jon Smith" with email information, and then realize it should be "John Smith" and correct it, in  many cases when I next open/use the
    list the contact info has reverted back to "Jon Smith". This appears to occur at random.
    Returning emails sometimes have sender addresses that are incorrect, i.e. an item sent to "John Smith" (a list member) will reach him, but his reply comes back as "Don Jones"
    In addition, we get locked out of this list at random intervals. Our environment is Exchange Server (I believe it's 2010, not 100% sure) and Outlook 2010 clients.
    Any insight is appreciated.
    Thanks,
    Steve Macey

    Hi,
    So this is a Public Folder Distribution List, please first check if you have the right permission to update it.
    Any other users having the same issue? Please share me the exact steps of how you modify the email information in the Contract Group.
    For the second issue, do you mean it's only the name that displays incorrect, but the email address is actually right? Please check if you have the "Don Jones" contact (in your case) in your address book, which has the same address info filled as "John
    Smith", the expected one.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Nokia E72 WLAN Home Network Issues After SW Update...

    Hi,
    I just updated my software recently to the most recent update, and until doing so, I was able to connect to my home WLAN network. Now that I've updated the software, when I try to access the internet from my network, I get an "Invalid server" error on my browser. I have attempted to delete the access point, but I don't know if this is the right idea, and, so far, it has not resolved the situation. 
    I can, however, still connect to my provider's internet services, and proceed as normal. 
    Can anybody help me with this issue?
    Thanks.  

    @katelouise
    Although you would need to backup essential data first, try resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user); satisfy yourself that WLAN access working before restoring contacts and messages, but you may need to avoid restoring "Settings"!
    Happy to have helped forum with a Support Ratio = 42.5

  • Material group Issue for Maintain specific EBP Purchasing org

    Hi Grus
    Can any one help me on this issue, is it possible to maintain some specific material group to one EBP purchasing org.
    your answerer will be rewarded.
    Thanks & Regards
    Sada

    Teja Provided some usfull document.
    Thanks Teja
    Sada

  • Purchasing group issue

    Hi,
    I am trying to assign an output type for PO printing to a P.Grp using T.Code MN04.I already assigned it but the output is not getting determined in PO.Where as, if I do the same thing for any other P.Grp. its easily getting determined.
    The issue is only with one P.Grp.
    Can you please suggest what can be the problem?
    Ashish

    Hi
    Check, if you have created the Output determination using the Txn MN04, If you try to create the same combination again in MN04 it should not allow you. Check the condition Recodr details in MN05 in the second screen enter the Doc. tyep /Purchase orgn/vendor which you have already created and execute you should be able to view the detailsinside if not then the condition is not there.
    mean whil how did you create an output type condition record based upon Purchasing Group ?  The existing Key combination does not contain any Pur grp. reference but Only Purchase Organisation only
    for two of the selections.
    Regards

  • CAF import / service group issue?

    Hi,
    I have developed a caf with a number of webservices exposed (CAF A), this has been deployed to a ce server, within a serperate CAF project (CAF B) I have imported a service from CAF A as an external service and used it within this caf. The two cafs have been deployed to a CE Server and works as expected.
    The problem occurs when I have deployed the two caf projects to another CE server different from the one I developed against, CAF B returns data from the orginal environment when calling CAF A's services and not from the environment it should use. If go directly to CAF A say by using ws navigator I get the right data, it is only when I go through caf B I get issue.
    Is there away to configure the service groups on NWAdmin and explicitly set which CAF in which environment to use?
    Any help will be greatly recieved!
    Thanks,
    Jon
    Edited by: Jon Hardman on Jan 20, 2010 7:25 PM

    Hi Jon,
    you can specify the provider system for the respective service group via
    NWA -> SOA Management -> Application and Scenario Communication -> Application Communication.
    Make sure the provider system you assign refers to the correct physical system. You can check this under Technical Configuration - System Connections.
    Regards,
    Christian

  • Peap AUthentication User Group issue

    Dear All,
    I have a strange problem. We are running Wireless service which includes Cisco AP1200 (B&G), radius server ACS 4.0, WPA/TKIP. We have two setups, one for trusted machines which are part of our domain, other is untrusted which is from students. We have also setup groups in ACS 4.0 to allocate the required Vlan accordingly.
    When untruisted machine logs in, it gets the required vlan which is fine. But when on the same machine I log in with domain account it get us the trusted machine ip address which is not right.
    Is there any way I can stop this behaviour because if some with untruested machine logs in with the domain account, he/she will get the ip which is only for trusted machines.
    Two Vlan are with two ssid'S.
    I will be thankful, if someone could help me in this seyup issue.
    regards
    Khaleefa

    Try these links:
    http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00807917aa.shtml
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_tech_notes_list.html

  • Lync2010 | Team-Groups issue

    Hello,
    We have an user complaining that he set his team-group added members but seems everyday this team-groups members are auto cleaned and he need to add everyone again.
    Any idea?
    Thanks!

    Hi,
    Did the issue happen only for one user or for multiple users?
    Please test to use on other well-worked computer and login with his Lync client to check if the issue persist or not.
    Please delete the user profile on the issued computer then test again:
    <user profile>\AppData\Local\Microsoft\Communicator\
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for