WLAN AP Group Question!

Hi Guys,
Did anyone know that how many AP Groups can be created by one Controller? (5508)
May I have 100 AP Groups?
Thanks

Q. What is the maximum number of AP Groups that can be configured on a WLC?
A. This list shows the maximum number of AP groups that you can configure on a WLC:
A maximum of 50 access point groups for the Cisco 2100 Series Controller and controller network modules
A maximum of 300 access point groups for the Cisco 4400 Series Controllers, Cisco WiSM, and Cisco 3750G Wireless LAN Controller Switch
A maximum of 500 access point groups for Cisco 5500 Series Controllers
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00808b4c61.shtml
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Similar Messages

Cisco WVC210 WLAN Camera - multicasting question

Hello,
it act's about the CISCO WC210 WLAN Camera, I would be really happy, if somebody could help us to eliminate our problem
Informatiom
We are using the WVC210 WLAN-Cameras (http://ww:w.cisco.com/en/US/products/ps9948/), this camera has a web server, so is accessible over a normal web-browser, to see the video transmission.
We just set it up with a normal WLAN-Router, so the camera is connected wireless to the router, and this router is connected to the internet (WAN).
With the cisco video-software or the web-interface, it's now possible to stream the video.
Our questions:
Now we like to stream the Video on our Website, so people what visit our site can take a look at our company and so on.
We are able to stream the Video with the MJEPG-Format, like the camera web-interfaces offers...
The problem is, with normal ip-transfer method, each user would connect directly to the camera and increases the data-transfer, the internet-connection will than overload easily.
But the camera supports multi-casting, so the camera only transmit one data stream and all clients connected to this stream will receive the packages.
Our problem is, we do not have any knowledge about multi-casting and how it works, the camera has a normal ip-address and a pre-configured multicast address with group name, so how can we connect a client to this multicast group, without increasing the data-transfer with each new user?
Would you recommend us to use the multicast function of this camera or put a server between the camera and the website?
Could you give as advice or some kind of tutorial, how we can set up this multicast service and easily get a player for the stream on our website, without using many plug ins or special apps ?
Looking forward for your help, thank you all
Regards
Markus
P.s.: You can also reply in german

Hi, your general understanding of multicast is correct, but I don't think there is any multicast in general use on the Internet today. In the mid 1990's there was a thing called MBONE that experimented with this idea for basically the same application as you describe- to multicast video. Check Google or wikipedia for some history of MBONE in case you are interested. That said, you should be able to use the multicast ability on your own LAN/WAN environment if that helps you at all.
I think the way people stream video to many users via the Internet today is essentially by having a lot of bandwidth and CPU. You could probably find places to host your video and 'rebroadcast' it via their servers and Internet bandwidth. Take a look a qik.com for an example of something that might help you. There must be other services similar to qik that can 'rebroadcast' video streams that you only send one stream to them and they let multiple users see it. I would expect to pay something for this service, but you might find free, ad supported services.
Good luck and let us know what you end up doing.
brandon

Multiple Artwork Covers Issue & Grouping Question

My favorite band is The Smashing Pumpkins. Their latest album +Teargarden by Kaleidyscope+ is being released one song at a time online for free and in 11 different limited EPs that will compose the whole album. My problem here is that there a two artwork covers, one for the entire album and a second for each EP (only one EP has been released, the first song for the second EP is out). The first EP displays with the EP cover but the one song from the second EP only displays the overall album cover. How do I get my Classic to display only one cover instead of picking randomly (as it seems)?
The following question deals with the same album. I want to group the EPs that are to be released in the future so that on my Classic I see only one big album instead of multiple EPs. Unlike their Machina II these EPs have subtitles for them. What I am wanting is one album cover to display (the overall album artwork), the name to display as +Teargarden by Kaleidyscope+ not +Teargarden by Kaleidyscope Vol. 1: Songs for a Sailor+ which is the name of the first EP in the album section of my Classic. Is all of this possible?

Just lke dropping support for 5 year old Tiger OS in iTunes while continuing support for 10 year old XP is an enhancement. Just like making the Library directory invisible in Lion is an enhancement. Just like dropping support for PPC generation applications in Lion is an enhancement. Just like, etc.
https://discussions.apple.com/thread/3496844?start=0&tstart=0
https://discussions.apple.com/thread/3650998?start=0&tstart=0
https://discussions.apple.com/thread/3529592?start=0&tstart=0
https://discussions.apple.com/thread/3503860?start=0&tstart=0
https://discussions.apple.com/thread/3498690
More with a web search using:
site:discussions.apple.com itunes artwork arrow

Authenticated Users Group Question

I have a quick question regarding the Authenticated Users "group". I used to be a systems administrator, but I'm a bit rusty since I've been a software developer for the last 10 years. A conflict with data center operations (DCO) group
at work lead me to get another opinion.
The question is this... is the authenticated users group a domain-level group or is there a local authenticated users group that would allow only users authenticated locally? We have a share that permits the authenticated users group access.
My opinion is that all domain users who have authenticated successfully have access to this share. The DCO group is telling me that this is the local (to the server containing the share of course) authenticated users group only.
Is there such a thing as a local-only authenticated users group? To me this doesn't even make sense, but I could very well be wrong.
Nathon Dalton
Sr. Software Engineer
Blog: http://nathondalton.wordpress.com

I apologize. I don't think I explained myself correctly. Let's consider the following...
SERVER: SERVER1
DOMAIN: DOMAIN1
SHARE: \\SERVER1\SHARE1
SHARE PERMISSIONS: Authenticated Users - Full Control
Given the above information, is it possible that the Authenticated Users group will allow ONLY users that are defined on SERVER1 to access \\SERVER1\SHARE1?
My understanding is that's not possible. There's one defined Authenticated Users group and that represents ALL users that are authenticated against DOMAIN1, whether added to local groups, shares, etc.
What I'm being told however is that SHARE1 having Authenticated Users assigned is okay since only those user accounts defined on SERVER1 will be able to access it. All the users in the domain will NOT be able to access it. I think this is bogus. Am I wrong?
Nathon Dalton
Sr. Lead Developer
Blog: http://www.nathondalton.com

A few SQL related protection group Questions - DPM 2012 R2

Hi - Here is my environment: DPM 2012 R2 backing up SQL 2012 DBs. Some of the DBs are simple recovery model, some are full recovery model in the same protection group.
1) Regarding the fact that DPM only looks to the recovery model when the DB is first added to the protection group, if I ever changed the recovery model in the future, would stepping through the "Modify Protection Group" wizard without changing
anything be the solution for DPM not changing its methodology on the backing up or not backing up the log files? Or would I have to remove the affected databases from the protection group and add them back in?
2) I have disk protection configured for 30 Days, sync every 15 minutes, and application recovery points once per day. Online protection is configured for 90 Days. Does this mean my disk consumption on the DPM side for full model databases will be the full
size of the databases, plus the amount of changes observed over 30 days? OR does it mean it will keep 30 full copies of the DB? I am fairly sure the former.
3) If I do decide to reduce the retention range on the disk side of this protection group to say 14 days, are there any specific issues with changing that after the PG has been working for some time?
4) My former backup solution had an option to run consistency checks after every SQL job. Is that still considered best practice? Would the "Run a daily consistency check" be a better choice than the "Only run if a replica becomes inconsistent"
option that I currently have in place? Would there be any ramifications to enabling this now after this PG has been in place for some time?
Thanks very much!

Hi
Q1) Regarding the fact that DPM only looks to the recovery model when the DB is first added to the protection group, if I ever changed the recovery model in the future, would stepping through the "Modify Protection Group" wizard without changing
anything be the solution for DPM not changing its methodology on the backing up or not backing up the log files? Or would I have to remove the affected databases from the protection group and add them back in?
A1)
Changing the Recovery Model of a Database
To change the recovery model of a protected database to the simple recovery model
Stop protection of the database, selecting the retain replica option.
Change the recovery model on the SQL Server database.
Add the database to a protection group.
Q2) I have disk protection configured for 30 Days, sync every 15 minutes, and application recovery points once per day. Online protection is configured for 90 Days. Does this mean my disk consumption on the DPM side for full model databases will be the full
size of the databases, plus the amount of changes observed over 30 days? OR does it mean it will keep 30 full copies of the DB? I am fairly sure the former.
A2) Your disk consumption on the DPM will be for size of model databases plus the amount of changes observed over 30 days.
Q3) If I do decide to reduce the retention range on the disk side of this protection group to say 14 days, are there any specific issues with changing that after the PG has been working for some time?
A4) Not really, but to gain back the potential extra space allocated for the original 30 day retention - you can try shrinking the recovery point volume once the retention range is reduced and the older recovery points are pruned. I would wait until
after midnight to be sure the old RP's are deleted, then try to shrink.
Q4) My former backup solution had an option to run consistency checks after every SQL job. Is that still considered best practice? Would the "Run a daily consistency check" be a better choice than the "Only run if a replica becomes inconsistent"
option that I currently have in place? Would there be any ramifications to enabling this now after this PG has been in place for some time?
A4) A consistency check will only run if DPM detects the replica is inconsistent. Even if you have the option selected to run nightly, if the replica is already consistent a consistency check will be skipped.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Hierarchical Tree Data Query/Record Group Question

I need help with Hierarchical Forms right now. I'm currently trying to implement a hierarchical tree to display the different items in different categories. I have been reading up on it for the past few days, and i do not understand a few things.
What is the difference between a data query and record group? they seem the same to me.
How does the XX = prior XXX work? i understand that this is what connects the parent to the child.
How do you determine what depth the node is? its done in the record group/data query, but how do i decide what level it is dynamically?
Thanks a lot in advance!

Thanks! I am unable to create a table specifically for the tree because i am using tables that have been ported live and are in use. My question about levels is how do I know which depth the node is. For example, i have a category called Information Technology and a category item called Business Informatics. I want to know how to decide that the Category(information technology) is on level 1 and the Item(business informatics) is on level 2.
Information Technology
|_
Business Informatics
And i do know how the Connect By XX = prior XXX works in the data query/record group.
Thanks for your help!

WLAN AP group issue

Hi all:
I just set up 10 vlan interface and 10 AP groups for each vlan by only One SSID.
But it's didn't work for me.All the client cannot get IP and even prompt a wep key enter .
I set up something as below :
1.set up AP group and assign vlan interface and SSID to each ap group
2.Assign the AP group to each AP i want.
3.Set up 1 SSID and use the managment interface.
I don't know what step i miss or anything wrong with me .
anyone have any ideal , please tell me .
Thanks a lot!

Hi fella5 :
First , Thx your idea.
All vlans configured to the switch and all the Layer3 interface configured for each one .
DHCP scope work fine .
The PC client can associate to the AP successfully when i change the interface to other vlan at WLAN interface.But the AP group just not work.
by the way , would you mind tell me how i can assign the ap group to each radio ?

Address Book Smart Group question

Hello all,
I want to create a Smart Group in Address Book that compiles people according to their job title.
For example a group of everyone whose job title is 'Manager', i.e. Job Title contains Manager. But for some reason Job Title is not in the list of options when creating a Smart Group.
Is there a way to make it work?
Also, (a question for all the Snow Leopard users) is the option for Job Title there in OSX 10.6?
I'm using Tiger 10.4.11.
Thanks all.

There is no such field for Job Title by default. If you select the Add Field item from the Card menu you can add that field to a card. However, I do not see Job Title as a search field for a Smart Group. I assume this is a bug which you can report here: Feedback.

PCNS Inclusion Group question

Hi,
To ensure PCNS works correctly, I assume you have to be part of the Inclusion Group at the time of your password change?
The scenario I am thinking of is where FIM manages the membership of the Inclusion Group...and the user changes their password before a FIM export updates their Group membership...I guess PCNS won't magically start working once they enter the correct Inclusion
Group?
just some wishful thinking ;)

Yes, you understand it correctly - password would be changed only in the user's domain and would not be propagated to other directories.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

WLAN 4402 Design question

Dear Support,
Wondering if anyone could help me, after some basic design advice on a WLAN implementation and if it is achievable.
Summary
VLAN 201 - Wired user LAN and 2003 Server running IAS (10.115.2.x /24)
VLAN 201 - Secure WLAN on 10.115.2.x /24
VLAN 60 - Management LAN for WLAN 4402 controller and 4 1130 LW (layer 2 mode) APs (172.16.31.x /24)
WLAN 99 - Guest WLAN with web auth (192.168.252.x /24).
I have a DSL router for the 192.168.252.x subnet for internet access for Guest users. A DHCP scope if configured on the WLAN controller
I am wondering if I can have the same subnet (and addresses assigned via the server running IAS) for both the wired users and secure WLAN.
Thank you for your assistance in advance.
I always rate helpful replies.
Best regards, Adrian.

Hi Ankur,
Many thanks for replying, ideally this is what I need to know is possible.
Currently the wired users on vlan 201, get an IP address via DHCP from the server, the same server is also configured with IAS for the implementation of MS-CHAP-V2 for authentication using their AD username and password (still yet to get working).
Ideally I would prefer that the wired and secure wireless (ms-chap-v2 on vlan 201) get their IP addresses from the same server. I need to know if it is possible to have both a wired VLAN and wireless WLAN using the same VLAN id (in this case 201).
I?m not over concerned with using either L2 or L3 mode on the APs, they currently are set to L2, but happy to define another scope either on the WLAN controller of the IAS (w2003) server.
Think the fundamental question I?m asking, is ;
Is it possible to have both the Wired users (VLAN 201) and Secure WLAN users (also on vlan 201) to share the same subnet. The reason this is crucial to the design is that the 10.115.2.x subnet is routed via a third party and getting them to add additional routes (i.e. one for the wired users and one for the wireless users is a pain! And a lot of paperwork!)
I have tried to do the config already the issues I have is that pings from the server to the management address of the WLAN controller sometimes work and sometimes don?t. I have 2 x 3560 switches doing the routing between the user (v201) and wlan management (v60). This is also the same in the opposite direction (4402 to the DHCP/IAS server). I am always able to ping the SVI of the v60 from the server. I'm also not seeing any authentication requests being passed to the IAS server.
Thanks again in advance for your assistance.
Best regards, Adrian.

Advanced filtering/grouping question (pivot-table?)

Ahoy. I have come across a few flies in the final varnish of an image database I'm working on. I don't yet know the best way to ask the question. I think what I am looking for is some kind of pivot-table like grouping capability. I think I could do this with nest-able Smart Albums -- but you can't nest Smart Albums in Aperture. (Journler, for those who used it, had, imho, a brilliant implementation of nest-able filters.)
Let me give what should be able to serve as a good generic example: a Library of dog images. These are organized into Projects based on shoots. The images are keyworded with the dogs' breeds, their type, their coat type and color, their individual names (when known), and other "normal" dog characteristics (gender, age when known, etc.). There are also some special keywords, such as a set for expressions (Relaxed, Angry, Teeth Bared, Questioning, Attentive), and, where needed, details of ailments (Sore, Rash, Teeth, Gums, Wound).
I have set up Smart Albums to show many of these, e.g.:
. Spaniels
. Huskies
. Retrievers
. Cocker Spaniels
. Labrado Retrievers
. Details of Angry expressions
etc.
The database problem I am trying to resolve is: how best to narrow selections of groups of Smart Albums? Using the example above, for instance, I have Smart Albums to show me all the detail images of expressions:
. Dog is Angry
. Dog is Attentive
. Dog is Asleep
. Dog is Tired
. Dog is Questioning
. Dog is Relaxed
How best to narrow those to, for instance, just Huskies? or just Working Dogs? or just the individual dog known as "Nanook's Shadow"?
Clearly, if each of those is a keyword (or a keyword container), I can simply add the keyword to the Filter. But I want much greater functionality than that.
By "best" I mean to include the ability to change the variable -- to chose not just "Huskies", but also "Retrievers", and not just "Working Dogs" but also "Hounds". And I want to change this at once -- not individually for each Smart Album.
What I've come with is clever and borders on elegant (imho - ), but remains a kludge.
Smart Albums can be subordinate to only Projects and Folders. Subordinating them to Projects does me some, but little, good. (Subordinating them to other Smart Albums, or to regular Albums, would do me more good, but is not allowed.) I therefore created a new parent Folder for each set of Smart Albums I wanted to be able to readily filter as a group, and copied a set of Smart Albums into it. I then set each Smart Album's "Source" to the containing Folder rather than to "Library". At this point, the Smart Albums show no images, which is good. Now, all I have to do is create an Album of images I want the Smart Albums to operate on, and drag that Album into the containing Folder. So I go to my "Hounds" Smart Album, select all images, create new Album with selected images, and drag that into my Folder "Dog Expressions". The Album filters the universe of my Library to just "Hounds" and the Smart Folders filter from that narrowed group.
This is relatively flexible: If I want to include "Retrievers" as well as "Hounds", I just make another Album and drag it into the "Dog Expressions" Folder. If I want to see only Retrievers, I drag the "Hounds" Album out of the "Dog Expressions" Folder. (So I made a holder Folder called "Sets for Smart Albums" and I keep Albums such as "Retrievers" and "Hounds" there.) I now have a relatively supple drag-and-drop method of filtering groups of Smart Albums all at once.
But you can already see the problems. First among them is that the Albums are static. I will need to create new Albums in order to include any new images or Versions or whenever I get around to keywording, etc.
Still with me? Can you help me do better?
Is there any reason one couldn't have a pivot table based on metadata? One which not only filters but also groups, so that I could have a view showing (for instance) details of Huskies expressions grouped by expression?
Thanks in advance. If this catches you on Friday, enjoy the weekend.
Message was edited by: Kirby Krieger

LOL. Thanks for the laugh -- the slideshows part is especially funny. Are you Aperture certified yet? The test has no surprises at all. It is very well done (exemplary for on-line testing, imho) and covers all parts that it says it will.

C3-01 WiFi / WLAN & VoIP / SIP Question

Hello,
I am very interested in purchasing a C3-01, as I don't want a smart phone, but I like the advanced features this phone offers. Specifically, I want to make use of the VoIP SIP client that comes built in.
My question is this: I will be using VoIP / SIP on the WLAN (Wi-Fi) connection. In another post on this forum, I saw a user saying that Wi-Fi gets turned off automatically when the phone is locked.
So, does this mean that if I've got a VoIP account set up, and the C3-01 locks (either manually or automatically), that the WLAN will drop out and I won't be able to get incoming VoIP calls?
If this is how it works, this is a pretty major oversight, and I will look for something else.
Thanks
Solved!
Go to Solution.

Yeah, Sadly Some Country still have the v05.68 as the latest firware, But the reason might be that the Firmware released in your Country may contain the fixes included in the Latest Firware for Our Country.
So thats ok, If Nokia Finds any fixes to be done then, they will release a new Firware Update for your Country. Be Rest Assured.
And Buy C3-01.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Terminal: "open -e/t" question. Windows group question

2 questions regarding Terminal
1. Is it possible to make it so the open -e, or open -t command, instead of opening TextEdit, opens a different text editor?
2. Is it possible to open a Windows group, and have JUST 1 of the windows execute an ssh command?

1. Is it possible to make it so the open -e, or open -t command, instead of opening TextEdit, opens a different text editor?
Sure. 'open -t' uses the default text editor application, as defined by LaunchServices. On a standard system this is TextEdit.
If you want to have 'open -t' use a different TextEditor then you need to specify an alternative application as the default text editor.
This is easiest done by selecting a plain text (.txt) file in the Finder and choosing File -> Get Info. In the 'Open with' pane you can choose an alternative text editor and clicking the 'Change All' button will update the LaunchServices database with the specified application as the default.
Now any .txt file you open will launch in this application, whether it's opened in the Finder, or via 'open -t'.

Delivery group questions

Hi,
Can anybody answer below questions?
1) Once assigned to a group how can you see the group from the delivery; its not in the document flow. I am struggling making this connection.
2)If multiple deliveries are put into the same delivery group, can they be split into multiple shipments? This seems to be posslble but I am unsure of the
3)Is there a delivery group monitor to track open (unshipped) delivery groups?
4) Is there any T-code to group deliveries at IM level. i am sure abt LT45 and VG01 but both of them are at WM level.
Thanks,
Bhairav

Hi Bhairav,
There is transaction code VL06o, I think this will help you out. Go to this transaction and click "List out bound Deliveries" it will take you in to next screen in that screen you go to Doc.Data there you can find Group field selection there you enter your delivery group and execute the report.
Regards,
Murali.

WLAN 3G connection question Nokia N8

I have the N8 at home I use the WIFI connection of the wireless router. But when I leave my house I want to switch the phone automaticly to the 3G network of Vodaphone.
I tried several settings but these did not solve my wish.
Moderator Note: Non-English Language removed. Presently, Nokia Support Discussions accepts only content posted in English.
Solved!
Go to Solution.

Go to menu/settings/connectivity/settings/destinations/internet and set your home wlan as the first priority and your 3G supplier as the second priority.
N95 (RM159) V31.0.017, N8 (RM596) Belle 111.040.1511

WLAN AP Group Question!

Similar Messages

Maybe you are looking for