WLAN Authenticated Proxy, Nokia 5630

Hello,
I am using Nokia 5630 which has wireless feature.
I have defined a wireless access point. In advanced settings of this wap, we can define a proxyort which let us use internet on on an access point which is behind a proxy server.
BUT , we can not define a proxy username and password at all. In many places especially in university, accessing to internet needs a proxy username and password.In other words, there is an authenticated proxy instead of open proxy server.
Please add this feature to advanced settings so that we would be able to define a proxy username and password in it.
Best Regards

I would suggest to backup all your important data like contacts, messages etc and goto Nokia Care for software reinstall or update.
Hope this helps you.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Similar Messages

Nokia 5630 XpressMusic - network WLAN

Hi, Need some help!
I have configured WLAN on my Nokia 5630 and I have som questions regarding WLAN.
1. When I use the mobile for surfing the Internet, is the indication in the top left corner the network I'm currently using for my internet connection?
2. Even when I'm at home and is connected to my WLAN, the 3g network is used when I surf the net. If I remove my simcard WLAN is used.
a) Can i disable the 3g network for Internet surfing? How?
b) Can I make changes to the configuration so that WLAN is given priority before the 3g network? How?
Thanks!

I do not have this phone, but it is a s60 device so it should be similar to my 5800 and n97 at some points. Usually you can go inside the browser and set the browser to ask for connection every time. (browser->options-> settings-> genral-> accesspoint-> always ask.
Within connectivity settings, there should be possible to set priority of the connections. - If you set your wlan as default connection, your phone will use thast if you are within range.

Nokia 5630 XpressMusic WLAN problem Web: No gatewa...

When I connect to a WLAN network it connects but when I start browsing it says: Web: No gateway reply
My home Wi-Fi is Thomson Gateway TG782...
Can someone tell me what seems to be the problem and how to repare it?
P.S. Have in mind that I'm using Nokia 5630 XpressMusic not the N series....
thanks in advance

You have to tell some more about the settings. Is the SSID visible? Are you using a WPA-PSK key? Is the firmware of your AP up-to-date? Are you using MAC filtering? Try to reset the AP.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Profiling Problem & Web Authentication Proxy

Dear All,
I am facing problem with profiling of workstation over wireless network as ISE is marking these workstations as 'Unknown'. Whereas if I connect same workstation using wired connection then it gets profiled in the right category.
Profiling for wireless network was working fine initially but as soon as I pointed AAA towards ISE in the employee SSID then ISE started marking any new workstation as 'Unknown'. Before enabling AAA in the WLAN (SSID) the profiling was working fine using 'Radius NAC' setting in advanced tab of the same SSID. Becasue of the unknown category, workstation gets authorization rejection as per the authorization policy.
I have another query reagrding enabling 'web authentication proxy' on Cisco WLC. I have guest wireless setup using dedicated anchor controller and ISE is providing the guest sponsor and guest portal services. So when a guest user comes in and if the user already has some proxy configured in the browser then url redirection for guest portal doesn't work and guest user must remove the proxy.
So this requires someone to enagage with guest user but the client want this process to be automatic. I have gone through following document,
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080b8a909.shtml
but I am not sure if this solution will also work if the guest portal service is through ISE instead of WLC itself ??
Thanks & Regards,
Mujeeb

Not a problem the reason your profiling is failing for wireless users is that the profiling information for dhcp isnt hitting the ise nodes. For the wired devices are you using the dhcp probe to profile the users? If so, then your issue is with the dhcp proxy setting on the controller. Even through you have the ip helper statement on the svi, essentially your controller is proxying the dhcp broadcasts from the client straight to the dhcp server, so even you enable the ip helper statements on the svi for the ISE nodes it will not work.
You are correct for the guests, typically if a guest has enabled proxy settings before they should know that they should probably disable this setting when the connect to a new network.
Also I can not remember but arent the proxy settings configured under the network settings tab? Meaning the only time you would experience this issue is if the ssid you are broadcasting is the same as the ssid they have connected to previously?
Thanks,
Tarik Admani
*Please rate helpful posts*

Custmizing Authentication Proxy

We want to use auth-proxy on a Cisco 836 with IOS 12T3 in order to provide WLAN access as if in an airport lounge or a hotel. The login page sent to the browser is to be customized with regard to look and feel. I've been able to do that with "ip auth-proxy banner file flash://login.html" and "ip adminission auth-proxy banner file flash://login.html", but the actual FORM is created on the fly by the router with a hidden time form element. Can you give us details on how the HTML form can be customized with the regard to the individual fields on the form?

I have read that guide before, but it says it that auth proxy works with vpn and that
If a VPN client initiates an HTTP connection, the authentication proxy first checks for prior client authentication. If the client is authenticated, authorized traffic is permitted. If the client is not authenticated, the HTTP request triggers the authentication proxy, and the user is prompted for a username and password.
If the user authentication is successful, the authentication proxy retrieves the user profile from the AAA server. The source address in the user profile entries is replaced with the IP address of the authenticated VPN client from the decrypted packet.
The only way I could make an impact with auth proxy on the vpn behaviour was when I configured a split-tunnel rule for the vpnclient which points only sends traffic to a non-existent internal network via the vpntunnel. Only then would auth-proxy insert additional rules that allow access to more destinations.
As VPN without split-tunnel already allows access to all destinations I don't see how
auth-proxy can make a difference
Doro

How to use Axis to access a web service through Authentication proxy

Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure   codes
public class TestClient
   public static void main(String [] args) {
       try {
            System.getProperties().setProperty("http.proxySet", "true");
            System.getProperties().setProperty("http.proxyHost","proxy.com");
            System.getProperties().setProperty("http.proxyPort", "8080");
            System.getProperties().setProperty("http.proxyUser", "username");
            System.getProperties().setProperty("http.proxyPassword","password");
           String endpoint =
                    "http://nagoya.apache.org:5049/axis/services/echo";
           Service service = new Service();
           Call     call    = (Call) service.createCall();
           call.setTargetEndpointAddress( new java.net.URL(endpoint) );
           call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
           String ret = (String) call.invoke( new Object[] { "Hello!" } );
           System.out.println("Sent 'Hello!', got '" + ret + "'");
       } catch (Exception e) {
           System.err.println(e.toString());
   }I get an "(407)Proxy authorization required" error?

I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance!

Error authenticating proxy while running agent job

I am trying to schedule a SSIS2014 package via SQL Server Agent job. Both SSIS and SSMS are running on my local machine in the same domain. I am running SSMS with the same user
Domain\Admin which is the creator of the SSIS package. SSMS 32-Bit and SSIS 32-Bit are running on Windows 7 64-Bit machine. I can run the package within SSIS without problems.
When I use a proxy account to run the job step, the following message occurs:
Unable to start execution of step 1 (reason: Error authenticating proxy `Domain\Admin`, system error: Logon failure: unknown user name or bad password.). The step failed.
The proxy account uses the credentials identity Domain\Admin. Since the password fields for credential properties in SSMS cannot be left blank, I typed any password although my corresponding windows account has no password. So as mentioned above
it's the same user account that created the SSIS package since Domain\Admin is stated in the CreatorName property of the SSIS package.
With this proxy, I tried to run SSIS jobs using the package ProtectionLevel's
EncryptSensitiveWithUserKey and EncryptSensitiveWithPassword. Running the package manually within SSDT without problems, but from SSMS agent job the same error message appears. I tried the package sources "File System" and, after
importing the package to MSDB, "SQL Server" and "SSIS Package Store". But exactly the same error message appears with each method.
Task manager shows that SSMS is running in administrator mode. Using Windows Component Services I added DCOM permissions for
Domain\Admin to start and activate "Microsoft SQL Server Integration Services 12.0" from local. But the same error message appears. So in my opinion it's a problem with SSMS user account permissions (???) but unfortunately I don't know
what exactly to do here. I tried the following:
In the system database MSDB (full path: Databases / System Databases / MSDB / Security / Logins) I assigned all available role memberships (Including db_ssisoperator, db_ssisltduser, db_ssisadmin) to
Domain\Admin.
In server security (full path: Security / Logins) I assigned all available server roles. In the tab User Mapping, I assigned the MSDB database.
Still the same error message appears when I try to run the job. Does anybody have some ideas what I can try?

If you use the Agent then set the package protection to "Rely on server".
Then Domain/Admin is probably not an actual proxy but the account the Agent is running under, in this or even any case follow http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/ to create the
proper proxy for the packages.
Arthur My Blog

Cut-Through Proxy / Authentication Proxy on Cisco ASA using ISE as AAA Server for allocating SGTs

Hi,
We are trying to setup ASA to do cut-through authentication proxy, and use ISE as RADIUS. We can successfully authenticate the user from Radius on the ASA, while he opens a web-page, but then it displays the error: authorization denied.
What we want:
ISE to allocate a security group tag to the user session when he logs in, that tag would carried within out cisco network infrastrucutre to define the access
policy for that user.
Can someone please help me with a sort of step by step thing for ISE configuration to allocate SGTs/SGACL for the user session after authentication is completed.
Thanks
Lovleen

Please refer to below step by step config guide for security group access policies
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_sga_pol.html

How to number and message screening in nokia 5630?

hi
can anyone tell me, how to use the number and message screening in nokia 5630. it is a mobile with s60 platform and has number and message screening mentioned as its built in specification. i cant figure it out how?

Hi Len,
actually I thought about highlighting a word, phrase, or passage, holding it with the mouse, and then shifting it around within the text to the desired place, just as I used to do when I owned a PC. Does this work with Mac as well?
Frank

Nokia 5630 XM Maps Updater Error Cannot get enough...

Hi experts,
I have unsolved problem until now. I have Nokia 5630 (buy in Czech Republic), I updated to lastest firmware 012.020 and after that I can´t connected with Nokia maps updater (it shows the announcement like topic - see attached file). I try hard to reset and many, many things but without positive results. Is it this problem solvable?I want to use Nokia maps and I don´t. I want to buy Nokia GPS modul but it is useless in this time. It must be any solution from Nokia company.
Thank you for your solution and I hope in any advices

--------OK------- Działa na nokia 5630 s603rd! Tu jest cały pakiet -----> http://chomikuj.pl/krzysiukrz?fid=142502794 . Ściągamy plik zapakowany. Rozpakowujemy. Pierw instalujemy pakiet podstawowy mapy 2.0 a zaraz 3.0 (read me text). Przez ovi suite (nie przez maps loader) przechodzimy do map i ladujemy sobie mapy. Powrócilem do tego co miałem przed hard formatem
It works OK on the nokia 5630 s603rd! Here is the whole package -----> http://chomikuj.pl/krzysiukrz?fid=142502794. Download the packed file. Unpack. First install the base package maps 2.0 and after 3.0 (read my text). By ovi suite (not the loader maps) go to map and load the map. I went back to what I had before hard format: smileytongue:
i think you must found this on google
Nokia Maps v3.1.8 S60v3

Authentication Proxy

I have written a client based on weblogic to call a webservice on some server.
My client is behind authenticating Proxy. The proxy fails to authenticate me and
redirects to its failure page.
I have tried using SoapProxyAuthenticator class as discussed previously on the
forum but it doesnot get instantiated.
Is there any way to send the authentication details while calling a rpc based
method?
I am pasting the code snippet for reference
Thanks and regards
Rahul
public class TestWS {
public static void main(String[] args) throws Exception {
try
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory","weblogic.webservice.core.rpc.ServiceFactoryImpl");
     System.setProperty( "java.protocol.handler.pkgs", "weblogic.net" );
     // System.setProperty( "http.proxyHost","wwwgate0.mot.com");
     // System.setProperty( "http.proxyPort","1080");
     System.setProperty( "weblogic.webservice.transport.http.proxy.host","wwwgate0.mot.com");
     System.setProperty( "weblogic.webservice.transport.http.proxy.port", "1080");
     System.setProperty( weblogic.common.ProxyAuthenticator.AUTHENTICATOR_PROPERTY,
"webserv.SoapProxyAuthenticator");
     System.setProperty(webserv.SoapProxyAuthenticator.PROXY_USER,"36514460118299061884316694295");
     System.setProperty(webserv.SoapProxyAuthenticator.PROXY_PASSWORD,"3170432511608636918");
     System.out.println("Instantiating Shopping Cart Service.......");
     System.out.println("Using proxy - " +
     System.getProperty("weblogic.webservice.transport.http.proxy.host") );
     ShoppingCartServiceService_Impl tempService = new ShoppingCartServiceService_Impl();
     System.out.println("Calling getShoppingCartServiceMethod......");
     ShoppingCartService temp = tempService.getShoppingCartService();
     System.out.println("Shopping Cart Received " + temp);
     //Create Address details bean.
     AddressDetails ad = new AddressDetails();
     //Create UserDetails bean.
     UserDetails user = new UserDetails("a", "PO", "1", "b");
     System.out.println("userdetails and address created");
     ShoppingCart sc = temp.getCart(ad, user);
     System.out.println("Received Shopping Cart..." + sc);
catch (Exception e)
System.out.println("CAUGH EXCEPTION ??????????????");
System.out.println("Authenticator Class---"+ System.getProperty(weblogic.common.ProxyAuthenticator.AUTHENTICATOR_PROPERTY));
e.printStackTrace();

Hi Rahul,
The proxy authentication is done in the
weblogic.net.http.HttpURLConnection class, which is in weblogic.jar. It
contains the logic to handle 407 (Proxy-Authenticate) status codes
received from HTTP Proxy servers. It (WebLogic Server) uses the
weblogic.common.ProxyAuthenticator interface to callback into developer
provided code, to obtain the authentication information to be sent as a
response. See [1] for details. Also Michael Wooten has some sample code
[2] that was done for WLW, that contains the java source that implements
weblogic.common.ProxyAuthenticator, if you want to see how that works.
Hope this helps,
Bruce
[1]
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/common/ProxyAuthenticator.html
[2]
http://newsgroups.bea.com/cgi-bin/dnewsweb/weatherjws.zip?cmd=article&group=weblogic.developer.interest.workshop&item=184&part=2&utag=&/weatherjws.zip
Rahul wrote:
>
Thanks Bruce,
Yes I have gone through the document. But I think It applies only to weblogic
workshop.
I am not using the workshop. Can I do this by just using the weblogic server?
regards
Rahul
Bruce Stephens <[email protected]> wrote:
Hi Rahul,
Have you gone through the section in the docs [1] on this topic?
Thanks,
Bruce
[1]
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/howdoi/howUseWebServiceBehindFireWall.html
Rahul wrote:
I have written a client based on weblogic to call a webservice on someserver.
My client is behind authenticating Proxy. The proxy fails to authenticateme and
redirects to its failure page.
I have tried using SoapProxyAuthenticator class as discussed previouslyon the
forum but it doesnot get instantiated.
Is there any way to send the authentication details while calling arpc based
method?
I am pasting the code snippet for reference
Thanks and regards
Rahul
public class TestWS {
public static void main(String[] args) throws Exception {
try
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory","weblogic.webservice.core.rpc.ServiceFactoryImpl");
System.setProperty( "java.protocol.handler.pkgs", "weblogic.net");
// System.setProperty( "http.proxyHost","wwwgate0.mot.com");
// System.setProperty( "http.proxyPort","1080");
System.setProperty( "weblogic.webservice.transport.http.proxy.host","wwwgate0.mot.com");
System.setProperty( "weblogic.webservice.transport.http.proxy.port","1080");
System.setProperty( weblogic.common.ProxyAuthenticator.AUTHENTICATOR_PROPERTY,
"webserv.SoapProxyAuthenticator");
System.setProperty(webserv.SoapProxyAuthenticator.PROXY_USER,"36514460118299061884316694295");
System.setProperty(webserv.SoapProxyAuthenticator.PROXY_PASSWORD,"3170432511608636918");
System.out.println("Instantiating Shopping Cart Service.......");
System.out.println("Using proxy - " +
System.getProperty("weblogic.webservice.transport.http.proxy.host"));
ShoppingCartServiceService_Impl tempService = new ShoppingCartServiceService_Impl();
System.out.println("Calling getShoppingCartServiceMethod......");
ShoppingCartService temp = tempService.getShoppingCartService();
System.out.println("Shopping Cart Received " + temp);
//Create Address details bean.
AddressDetails ad = new AddressDetails();
//Create UserDetails bean.
UserDetails user = new UserDetails("a", "PO", "1", "b");
System.out.println("userdetails and address created");
ShoppingCart sc = temp.getCart(ad, user);
System.out.println("Received Shopping Cart..." + sc);
catch (Exception e)
System.out.println("CAUGH EXCEPTION ??????????????");
System.out.println("Authenticator Class---"+ System.getProperty(weblogic.common.ProxyAuthenticator.AUTHENTICATOR_PROPERTY));
e.printStackTrace();

Restart problem Nokia 5630 XM

Hi everyone i have problem in my new Nokia 5630 when i Listen to music it make restart
what i have to do ?

Hi,
I , (like every user of this phone - I guess) have same problem... Unsolved!
/t5/Nseries-Devices-and-S60/Nokia-5630-problems/m-p/593968/highlight/true#M184673
My problem: /t5/Connectivity/5630-wifi-bluetooth-freez/td-p/668082
Nokia released phone which is usless as a music player! The funny thing is, that this is XpressMusic series...
I have newest software 013.009 and same exact problem.
Actually The bigest problem for me is, how to get rid of this phone and don't lose too much on it
BR,
Camusv

WLAN Wizard for Nokia 5800 Xpress Music

Can someone please tell me where can I get the WLAN Wizard for Nokia 5800 Xpress Music?
thanks

xsb91 wrote:
What WLAN Wizard?
If you want to connect to WLAN, just go to the connections in settings, and choose WLAN. Refresh the list and connect to any which is available. If you see none, you're in a wireless-free area.
Near enough what i posted mate, so why bother
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

HELP NOKIA 5630 PROBLEM

ca some1 plz help me with my problem i wanted to install a theme on my nokia 5630 but it says unable to install constraint by certificate i already set my phones software installation to all and online certificate check to off still says unable to install constraint by certificate plzzzzzz help me

plzzzzzz helpppppppp!!!!!!!!!

Any 3rd party armband suitable for Nokia 5630?

Hi,
I've been thinking about getting a Nokia 5630 Comes With Music, but there's one thing that has been stopping me.
Isn't it little odd that this phone is targeted to music lovers, but there are no official armbands (for sports and jogging)? This is kind of a deal breaker to me, as I would love to listen to music whilst jogging.
I couldn't even find any 3rd party armbands, and with those there's always the risk that the phone doesn't fit snuggly (annoying when jogging and the phone keeps moving).
Please help me get rid of my money by recommending something to solve this problem :')

Why not try the Nokia CP-402?
(Two colours available)

WLAN Authenticated Proxy, Nokia 5630

Similar Messages

Maybe you are looking for