Wlan card undetected after windows 7 re install on dell inspiron m5010

i have a problem with the wlan card on my dell inspiron m5010 where it is not detected and the drivers are not being installed and always says "no compatible hardware found. The software you are attempting to install is not supported on this system" even though after putting the service code it says it came with the system. please help me.

Hi,
In the Device Manager, enter the Network Card Properties and provide the Hardware ID of the WLAN card. Also provide the Windows version currently used on the machine.Let me try giving you the right driver.

Similar Messages

  • Satellite A350D - WLAN card disappeared after Windows 7 installation

    Hi folks.
    This is my first post on this forum, and it's not for a good reason.
    I have installed a brand new copy of Windows 7 32 bit, and after installing it, i have gone to Toshiba website and download the drivers for this version of SO. Everything looks great, except that the wireless LAN card drive don't works now. On the device manager nothing appears available. I don't have any error on Windows System Information.
    What is the problem? The wireless switch is on!! FN + F8 don't work. Help me!!
    [*Device Manager:*|http://img295.imageshack.us/img295/4649/systeminformation.jpg]
    [*System Information:*|http://img218.imageshack.us/img218/6196/devicemanager.jpg]

    Hi,
    Have you installed the Wlan driver?
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Download and install the driver for your model, while installing the driver enable the Wlan switch (if available) or pressing FN+F8

  • I m unable to access apple os after windows 7 instalation and its not giving the boot option

    i m unable to access apple os after windows 7 instalation and its not giving the boot option. plz any one help me out ..  how to fix it or how to delete windows 7 on my macbook

    Reboot, as soon as you hear the chime press and hold the option key, when the Boot Manager appears select OSX.

  • No network connection after windows 10 install

    No internet connection after windows 10 install- laptop wont recognize any wi-fi networks- repair option on MY ATT has no option for windows 10 system

    Hi,
    Sorry about that. One other thing to try is to try this in the command prompt:
    Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8 or 10: <Windows Logo> + x - Command Prompt(Admin)]
    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
    Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
    Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
    Reboot the machine
    If still having issues, you may need to uninstall your network adapter and install it again.
    -ATTU-verseCare

  • Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install

    Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install. please guide me

    Can't get you...Do you like to install Windows 7 on Dell Inspiron 3531 which has Windows 8.1 installed? or, you like to have both Windows 7 as well as Windows 81.?
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Microphone doesn't work after Windows clean install

    I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
    I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
    I have tried the Toshiba Software Installer but it didnt help
    I have tried both drivers on toshiba's website for Realtek but it still doesnt work
    driver_audio_realtek_TC40053600B.exe
    driver_audio_realtek_TC40064600A.exe
    Anything else I can try. Please help
    Thank you.

    Satellite A135-S4677
    After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
    1st Hardware Drivers & Hardware Utilities
    1) Chipset related
    2) Display
    3) Sound
    4) All other hardware drivers & hardware utilities
    2nd Toshiba Utilities & Toshiba Software
    1) Toshiba Value Added Package (TVAP)
    2) Toshiba Flash Card Utility (sometimes included in the TVAP)
    3) All other Toshiba utilities and Toshiba software
    Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
    So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
    Intel Chipset SW Installation Utility for Windows 7 (32/64)
    Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
    Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
    Please let us know what happens. Good luck.
    Mike

  • Strippe Problem after windows re-install...

    Hi,
    I'm the happy owner of a K8N Diamond Plus with, as you know, two raid controllers onboard (NVidia & Silicon Image).
    I've been using two strippe (Raid0) on the two raid controllers for 6 months now w/o any problem...
    Since my windows became unstable, i've decided to do a fresh windows xp re-install.
    My system boots from a strippe (connected to the NVidia Raid controller, 2x250Gb Raid0) w/o any problem BUT after reinstalling windows and installed the
    silicon image raid driver it couldn't recover the strippe (raid0) connected to the silicon image controller (drivers & utility are installed correctly).
    How can i recover my partitions on this strippe !! 
    I really need to recover those because i've really valuable data on those drive.
    I can't understand why my raid0 & my partitions where automaticaly recovered when installing the drivers & software... It works fine with all other raid controllers i've ever used.. (promise & nvidia)
    Any help appreciated..
    Yves

    Hello !!
    MSI released new silicon image drivers for this mobo, install them while windows setup using F6.
    You can find them here:
    http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
    Greetz

  • Can't get Fn keys to work after Windows 7 install

    I have completed the Windows 7 install but can't get the Fn buttons to work. I have found and installed the 'flash cards' which seems to do a similar thing but would like the proper Fn button as well.
    Does anyone know which of the drivers does this?
    thanks,
    Tim.

    Hi
    Hardware FN keys doesn't work in Vista or Seven even if you had TVAP installed.
    You can use the Key via Flash cards, to do that you need to open flash card
    settings and select "allow to show flash cards on mous over" (or someting similar).
    Now you can use the functions of flash cards, but you can't use it via key, i'll hope with the new relase of TVAP could fix that problem.

  • Computer OS wont startup after windows 10 install

    Hello im having problem booting my system after installing windows 10 . I made the installation and it worked fine from upgrading from 8.1. But then I wanted to format the drive and at the format menu it got stuck at 2 % and then I restarted the computer. Now it will hang at hp logo and go back to the same logo again. Do I have to replace my hard drive?

    From what I understand, if you completed the Windows 10 install and all went to completion, then you are supposed to be able to do a clean install with the Windows 10 DVD or USB download.  With a working computer, GO TO THIS PAGE and scroll down to the "Download Tool button"  Pick the 64 Bit version.  Once clicked it will ask if you want a DVD or USB for the iso.Once it is done and you have either the DVD or the USB version, see if you can then install Windows 10.  If that fails, you might need to replace the hard drive.

  • Z580 won't boot after Windows 7 Install

    Hi,
    After a clean install of windows 7 on the hard drive, Lenovo Z580 wont boot up but when hard drive it put into my old Acer laptop, boots fine. 
    Initially had to remove the hard drive from the Lenovo and put into another laptop to install windows 7 as lenovo wouldnt boot from usb or CD. And then after install tried putting hard drive back into Lenovo and just doesn't boot at all. Just goes to boot manager sceen and then blank in a continous loop.
    Please help! 
    Thanks in advance!

    Welcome to the forum!
    "remove the hard drive from the Lenovo and put into another laptop to install windows "
    You stated the exact reason for your problem.  You can't install Windows 7 on one laptop and expect it run on another by swapping the hard drive.  It doesn't work.  During the installation Windows inventories the installed hardware and configures itself accordingly.  Since they are two different machines, Windows won't boot.  You are going to have to resolve the USB or Optical drive boot problem on the Lenovo laptop you wish to install Windows on.  
    During bootup have you tried using the Boot Menu to boot the machine specifically from the optical drive?
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • How do I use existing sync key after Windows clean install?

    Hi,
    I had setup Firefox Sync on my old Windows 7 install and I have the Sync Key given during the set up. I had to clean install (format C drive) my Windows.
    Is there any way I can use the old Sync Key to get all my bookmarks and stuff back?

    The problem has resolved itself...
    ...despite spending several pointless hours trying to delete the existing BootCamp drivers without success, I finally restarted Windows yet again - and this time I was easily able to delete the existing drivers.
    I then restarted my Mac, installed the latest drivers without issue and it all works just fine.
    Windows, eh?!

  • HT3986 how do you enlarge boot camp partition after windows is installed

    how do you enlarge boot camp partition after windows is installed

    Welcome to the Apple Support Communities
    You can do it with third-party programs, but I don't recommend it because you can damage the hard drive. The best way to do it is to delete your Windows volume and create it again with the size you need

  • Fingerprint reader in V570 after Windows 8 install

    I replaced the Windows 7 install with Windows 8, and most of the functions are working.  I initially tried the original BioExcess software for Windows 7.  It would allow me to enroll one finger, but would not accept my system password.  BioExcess told me I needed the Windows 8 version I then tried the Lenovo Fingerprint reader for Windows 8 (actually for the V580).  It runs the Password Vault, but not the fingerprint reader module.  Short of paying BioExcess for a licence has anyone been able to get this running?

    Hi Sammh and welcome to the Community,
    You have an AuthenTec reader.
    Go to here and follow the instructions to uninstall the reader and then follow the link given to download and install the driver provided.  
    This is the one I'm using on an x61 and it is working in Windows 8.
    Regards,
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • [SOLVED] Arch Linux install on Dell Inspiron N5110

    Hello people!
    I`m new to Arch, i installed it a while ago on my desktop PC and it works like a charm, so i want now to install it on my laptop.
    I`m wondering if any of you (hopefully) has installed it on a similar laptop, and if he/she can to give me some heads-up before i start the install.
    This is my system info:
    Product  Dell Inspiron N5110
    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz
    Total Physical Memory     6.00 GB
    Video Card - Intel(R) HD Graphics 3000
    Video Card - GeForce GT 525M
    Network Card - Intel(R) Centrino(R) Wireless-N 1030
    Mouse - Dell Touchpad
    I really appreciate any info, or suggestions regarding this.
    Thanks in advance.
    Last edited by bogz (2012-05-15 19:18:18)

    The process is very much the same as your desktop install. Just follow the Beginner's Guide and you should be fine. There are, however, a few things you may want to consider (and this applies to laptops in general, not to any specific model): https://wiki.archlinux.org/index.php/Laptop
    If it comes with an SSD, you should also read the wiki article on SSD's: https://wiki.archlinux.org/index.php/SSD

  • Re: Graphics card not working after Windows 10 install

    Hi, i still have my original SCM installed, like from the original 8.1 install.
    Is there a new version released for Windows 10 maybe? I don&#39;t know what could be causing this.

    Hi there,
    I am using MSI motherboard 970A-G45 and windows 7 BIOS is at 1.11
    However if i upgrade to Windows 10 does that mean i have to upgrade to (Windows 8) BIOS 2.7 or wait until they release the BIOS driver for Windows 10.
    They managed to update mo...

Maybe you are looking for

  • HT5085 Purchased an Album on iTunes and now I cannot retrieve it it is no longer available in my country I want a refund

    Its bad enough That the music purchased if protected from ME Albums I purchased thinking they were safe on a cloud I can no longer Retrieve Not available in my country I think I should get a refund so I can purchase it on Amazon

  • NAT type, wrt45g

    Can anyone help me change the nat type on my ps3? im not quite sure what settings to change with the router, and im pretty sure thats the problem since my old belkin router was type 2.

  • Three tricky problems

    This far I'm very happy with Archlinux. There's just these three things bugging me, I just can't seem to get it right on my own . 1. First and most important is to get sound working, I installed oss with some help from the wiki without problems. But

  • Mysql 5

    i tried searching, but couldn't find anything on mysql 5.  anyone know when this package will be downloadable with pacman?  i would just grab it from mysql.com, but for some reason, it's down or something.  thanks.

  • No DVD-RW anymore

    Hi there, all of a sudden, i can't read/write any DVD-RW any more. Even the DVD-RW's i burned three months ago on my MacBook Pro can't be read anymore on the same MacBook Pro. The drive is just spinning around for about 20 seconds and then spits them