WLan connected, iPad and iPhone internet ok, iMac not working after trying everything (manual ip etc...)

I am quite new with a mac computer. But i think i nearly tried everything, i have no idea what else could help...
My iPhone and iPad are working perfektly in the wlan. My iMac works very rarely. Yes it worked once by manual ip, but later it did not work again.
Wlan always works (sometmes it takes a few seconds until thesymbol is fat, mostly it starts with "no internet")
I tried so many things...
- manual ip found out by my windows pc
- $ in front of the password
- the apple faqs on the websites
Very strange, but i hope someone solved an comparable problem already ;)
Thx!

I had a surfstick before, does that influence the whole thing?
And another thing: in other wlans the iMac worked perfectly... Without any manual settings etc.
Anyone an idea?

Similar Messages

  • My computer crashed hard drive was replaced and now I have lost my music.  Am trying to sync with my music from my iPad and iPhone but it is not working what is the problem

    I need help please!  My computer crashed lost all data including my music.  Want to sync music from my ipad and/or iphone but it is not working.  What could be the problem how do I tackle it?

    Syncing only works from your computer to your iPad/iPhone, not the other way around.  So you can only transfer your purchased music from the iPhone to your computer.
    See this document: http://support.apple.com/kb/HT1848
    My computer crashed lost all data including my music.
    How bad was the crash? Had the drive to be replaced? Or is there a possibility to use data recovery software on that drive?

  • How do I get my photos on my iMac sent to my iPad and iPhone? Nothing seems to work.

    How do I get my photos on my iMac sent to my iPad and iPhone? Nothing seems to work. hurtalert

    Is your iMac the computer you normally sync your iPad to?
    If so put your photos into albums in iphoto on your imac. Then start iTunes on your iMac and connect your iPad to your iMac. In iTunes on your iMac select your iPad in the left column and selectPhotos in the right column. Scroll down and select the photo albums you want on your iPad. Then select Apply in the lower right corner of iTunes. This will load the sleuthed photo albums onto your iPad. Do the same for iPhone.

  • TS1702 I bought an book from itunes on my ipad.  after syncing my ipad and iphone the book did not transfer to my iphone.  any suggestions.

    I bought a book from itunes with my ipad.  after syncing my ipad and iphone the book did not transfer to my iphone.  Any suggestions?  I might add that I an technically handicaped

    If the book isn't on your computer's iTunes then you should be able to copy it from the iPad by connecting the iPad to your computer and in iTunes doing File > Transfer Purchases and you can then sync it to the iPhone (connect the iPhone to your computer, select it on the left-hand side of iTunes, and use the Books tab on the right-hand side to select and sync that book). Or you can re-download it directly on the iPhone : http://support.apple.com/kb/HT2519
    Another option, if you always want ibooks to download on both devices, is to turn 'automatic downloads' for books 'on' on both : http://support.apple.com/kb/HT453

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

    I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
    so i'm using the usb mouse

    I want to clarify the issue.
    The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
    With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
    Post here with your results!!

  • HT4906 how can I get photos from my iPad and iPhone onto my IMac desk top with ICloud ?

    How do I turn on ICloud on my desktop imac 27 inch so photos from my ipad and iphone go to it

    Here's some additional information that should help:
    iCloud: System requirements
    iCloud: My Photo Stream FAQ
    OT

  • Do I need to turn on iCloud backup for auto sharing between my iPad and iPhone, example photos, reminder, notes, contacts, etc

    When I turn off iCloud backup then I think my iPad, and iPhone stop sharing contacts and reminder phone stream etc, so do I need iCloud backup to be turned on

    No. Backing up to iCloud is entirely separate from syncing data with iCloud to your other devices.  Backing up to iCoud is entirely optional and turning it off shouldn't effect your iCloud syncing in any way.

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

  • Trying to connect iPad and iPhone via Bluetooth

    Whenever I try to connect my iPad with my iPhone via Bluetooth a window shows up saying "Make sure iPhone is turned on an in range" ,even though I switched off and on Bluetooth many times but it didn't work

    In general this is not a feature of wither iPad or iPhone.
    The excepts are internet tethering, if provided by the carrier, and some apps allow connection from within the app.

Maybe you are looking for

  • JNLP - Swing application compiled in jdk1.5 not working in jdk1.6

    I have one swing application, compiled in jdk 1.5 and deployed in JNLP with jdk 1.5. When client machine try to access the application and having jre 1.5 then it works fine. but if client machine having jre 1.6 or version greater than 1.5 then applic

  • Managing Server Encryption Keys in IDM 8.1

    I am trying to import the server encryption key from my local machine to the development environment. However, I get the error "java.lang.IllegalStateException: Error attempting to decrypt: Given final block not properly padded". I am attempting to i

  • Sync w/entourage x, iCal version 2.0.5 & most current version of iCal

    PowerBook G4 (work computer) -Entourage X (I use calendar & contacts from the applicaiton everyday) - iCal version 2.0.5 **currently I am importing my Entourage calendar into my iCal and exporting my contacts from Entorage and importing them into Add

  • Web Template - Using two Queries

    Hi Gurus, Can I use one web template, using two or more queries? And What web iten I need check for don't appear twice the variable ? Tks, Magani

  • L_TO_CREATE_SINGLE bin to bin

    I am trying to use the function module L_TO_CREATE_SINGLE to do a material movement from a bin to another bin. But I dont know what i am doing bad. Somebody can show me an example of the use of that FM for do that i need? Regards.