Wlan Controller and NOKIA e66 problem

Hi all I want to ask some questions: I'mexperiencing these serious problem: when i place a voip call with E66 the voice is seriously chopped.
With 7921 the voice is ok.
I'm using: WLC 4402 (vers 4.2.207.0) nokia Call Connector 1.60 on nokia e66, UCM 6.1. I used the same configuration of the WLAN of 7921 as QoS and other specification.
The encryption is WPA (I tried with CCKM+tkip+LEAP as the 7921 work but i have also LEAP authentication problem but is not the most important thing now).
I don't know what to do.
Can somebody help me?
Thanks for your support

Hi,
I upgraded to PR3 only my personal Phone and i made the tests with my e66.
I disabled the 802.11b network.
The problem is very evident when i place a call nokia<->7921.
calls nokia<->other cisco phone (non wifi) is acceptable but not very good.
If I make a call using nokia<->PSTN lines is ok (It is quite like other phone).
If I disable CAC the situation is the same
I don't know if it is a roaming problem or other problems.
Thanks

Similar Messages

WLAN Controller and Location appliance graceful shutdown?

Does anyone know if there is a supported graceful shutdown method/command for the
4400 series WLAN Controller and 2700 Location Appliances?
This weekend our server room will be undergoing maintenance and will experience a total power outage for a 4 hour period. It is our intent to manually bring all equipment down (hopefully in a graceful manner) and then back up once the maintenance is completed. As a result does anyone know if special precaution is needed to shutdown these 2 appliances, or can we simply bring down these devices hard which is the case with most other Cisco equipment?
Thanks in advance

Hi Mark,
Channel 1, 6, and 11 are just about as non-overlapping as 1, 7, and 13. There's an insignificant amount of overlap, so it's just as plausible of a solution, even in Europe. I honestly don't know why you wouldn't use the extra channels to eliminate the minor overlap - every bit helps.
The "channel blanket" or "virtual cell" WLAN design philosophy is rapidly spreading. Cisco maintains that it's a standards violation and I've heard no talk of them purchasing the not-to-be-named company or of them adopting the same design philosophy. I sincerely hope that they do one of the two soon, however, because it's very good design that's difficult for Cisco to compete against.

Nokia E66 problem with calling

HI!
It is less than two weeks from purchasing a brand new mobile phone - Nokia E66. Although it is a good device for a lot of things a modern men needs nowadays, it has some dificulties when it is ordered to call someone.
It works fine for a day or two, but after some time calling a persone from the adress book is impossible. Even if a number is displayed as an "unanswered call" and "yes" button is pressed everything from the screen dissapears. I am able to call someone only if I type a number manualy. Pressing the "yes" key works fine only if a number is typed manualy. Restarting the mobile phone also "repairs" the problem for a while.
I have the neewest software installed on the phone. What to do next?

i would consider reinstalling latest firmware and then using the code #2 from your home screen to finish the process. back up all your data and contacts if you don't have them on the sim card, remove the memory card when you do this and default code is 12345.
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
2. *#7370# - Reformat your phone
3. This you perform as a last resort. Nothing else is working.If the phone is dead proceed with reflash if not, turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Nokia E66 problem with call Logs

Hello,
I got the E66 like last week.
102.07.81
12-07-08
RM-343
I'm having a probelm with the Call logs. usualy, i should be able to go to call logs (missed calls, received, etc...) select the desired number and hit on dial; however, the phone does not respond. i press and nothing happens...
today it happened with the phone book... i searched for a user, and then pressed on dial but still nothing happens... i had to type the numbers....
is it a bug or i'm missing something?
BTW, i had to disable Rotate function as it is TOOOOOOOOO sensitive, a tiny move and it will switch the screen.

19-Sep-2008 08:11 PM
zahi_k wrote:
Hello,
I got the E66 like last week.
102.07.81
12-07-08
RM-343
I'm having a probelm with the Call logs. usualy, i should be able to go to call logs (missed calls, received, etc...) select the desired number and hit on dial; however, the phone does not respond. i press and nothing happens...
today it happened with the phone book... i searched for a user, and then pressed on dial but still nothing happens... i had to type the numbers....
is it a bug or i'm missing something?
BTW, i had to disable Rotate function as it is TOOOOOOOOO sensitive, a tiny move and it will switch the screen.
Hi Zahi and All.
I bought nokia E66 on August 1, 2008.
I got an issue very similar to the one reported by Zahi about call Logs: after some hour of use, I can't make any call neither starting from the call in the logs or from the phonebook: when I press the green button there's no way to make a phone call.
The only way to use the phone again is to restart the phone.
It sounds really like a bug...and i think that this is not an admissible bug for a phone that costs more than 400 Euros...
Hope that Nokia could fix asap the problem.
Regds.

2504 controller and RADIUS security problem

I am trying to congure a RADIUS server and the 2504 controller, but have a problem with the types of security. On the controller I have the choice of WPA+WPA2 but on RADIUS server I have WPA-Enterprise (PEAP) or smat card. How do I get the same security on both of them? I am very frustrated with this!
TIA,
Eric

In all the reading and videos and help from you here in this forum I have concluded that:
1. There are 3 places I need to have authentication congfigured.
   a. WLC
   b. NPS
   c. Group Policy
Here is how I have it setup ( still not working )
What am I missing or doing wrong here? I am so @#&*^&*)()*> frustrated.
TIA,
Eric

Wlan controller and branch office AP (vlan config)

Hi,
Our wlan controller is located in HQ office and we have APs in branch office. Is it possible to implement two different SSIDs and they should be in two different vlans? So should we configure the AP trunk?
REAP does not support IEEE 802.1Q VLAN tagging. As such, it does not support multiple VLANs. Traffic from all the service set identifiers (SSID) terminates on the same subnet, but H-REAP supports IEEE 802.1Q VLAN tagging. Traffic from each SSID can be segmented to a unique VLAN.
Thanks

Hello,
As per your query i can suggest you the following solution-
Yes, it possible to implement two different SSIDs and they can be in two different vlans.
For more information please refer to the link-
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml
Hope this will help you.

E51 WLAN prob and nokia presenter

I have two issues with nokia E51 when I find WLAN access point and try to browse through them it gives me error of ' no gateway reply' i dont know how to do with it , same router works fine with my laptop but not mobile .
Secondly I want to have nokia wireless presenter on my E51 how can i get it working.
regrads
Hina

nobody knows, oh well mods u can delete this topic, thank u

Tiger 10.4 iSync and Nokia N95 - problems fixed?

How is the Nokia N95 at syncing with Tiger's version of iSync now?
I have read about problems with firmware on these forum and wondered if anyone still experiences problems?

How is the Nokia N95 at syncing with Tiger's version of iSync now?
I have read about problems with firmware on these forum and wondered if anyone still experiences problems?

Lotus Notes 6.5 and Nokia 6300 problem

Hi All,
I'm using
Windows XP with SP2
Lotus Notes 6.5.4
Nokia 6300
PC Suite 6.82.26.0
When I try to synch my calendar I get the error: the system cannot find the file specified: local, mail\nllha.nsf.
A second error in Dutch "het vereiste gegevenstype wordt niet door de opgegeven database ondersteund". In English this would be something like "the file type is not supported by the database that you entered".
Any ideas would be very appreciated.
Thanks!
Best regards,
Lyset

Hi All,
Problem is solved... I created a new local replica of my calendar. Without Encryption. Now it works.
Bye,
Lyset

I need an instrument driver for Neocera LTC-21 Temperature Controller and am having problems sending the IDN? string to the same instrument.

Hi,
When I use the instrument wizard in LabVIEW 5.0, to indentify a device (Neocera LTC-21 Temperature Controller), I receieve the following error:
Error.
There was an error sending this string.
VISA error code returned was:
-1073807339
Error -1073807339 occured at VISA Read.
Possible reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Although, the manual for this instrument states that the response should be a string of characters in the form of "Neocera Model LTC-21 version".
Also, I do not have a driver for this instrument, inspite of checking on the NI Instrument
Divers Network and the company website(www.Neocera.com).
I would truely appreciate if someone can help me.
Thanks,
Kunal.

I could not find any drivers for that instrument. You may just have to make your own. As for getting the device to respond, there are a couple of things you can do. If you are using GPIB: First, you might want to just reset the device by turning it on and off. If there are other instruments on the same bus, make sure 2/3 of them have their power on. Try communicating with it through IBIC. Here is a page that will help.
http://www.ni.com/support/gpib/max/ibic.htm
IBIC communicates with the GPIB on a very base driver level and you set everything manually step by step, so you can see where the break down is. Also make sure you are entering the "*IDN?" and all other commands correctly. Check the device manual to see what commands it should respond to and if there ar
e any special settings you might need. If you are doing serial communication, you may want to check to see if you need a null modem cable for it to function. There also may be a dip switch on the device that switches between serial and GPIB communication.

5530 and Nokia Messaging problem

Hi
I have managed to download the Nokia Messaging email which sits in the 'internet' folder within my Nokia 5530, labelled 'Nokia Messaging email' okay so far so good!
When I try and get the application running all it does it create a mailbox within the normal standard default email instead of launching the dedicated application for push email. I have uninstalled it numerous times but no luck. Can anyone help its doing my head in
I know what it should look like having used it on the N85.
Steve

try signing in to your nokia messaging account in email.nokia.com maybe that will refresh it some how, and than delete the account on your device, and set it up all over again .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Cisco LWAP & WLAN Controller Flexconnect Across HP Switches

Hello All, I'm looking for a little guidance in making the needed routing and switching configuration changes on our Corporate Network to accomadate flex connect functionality for Cisco Lightweight Access Points (LWAPs). The LWAPs that are currently configured on our network only work when our WLAN Controller is up and running and I need for them to be disconnectable so that we can move the WLAN Controller to our virtual co-lo. It should be known that I inhereted this network from the previous admin and have been working hard to map everything out to the best of my ability. Also, the WLAN controller is already operating in our production network so it limits my ability to do much testing.
Just FYI, I'm a new Systems Admin promoted from a Desktop Support role and have my CCENT (Currently working on CCNA & MCITP Server Admin) so I have some knowledge but it is limited on the networking and switching side of things. Unfortunately, the Senior Systems Admin has even less knowledge of networking than me and I don't really have anyone to turn to which is why I'm posting here. I would have utilized GNS to help me simulate the configuration however there are HP switches in the mix and no means of emulating them.
-Relevant Device List-
(CONSA251) Sonicwall NSA 240 - 10.1.1.251
Interface Information
Interface    IP Address    Description
X0 -> LAN
10.1.1.251   LAN Interface
X1 -> WAN
*************   Time Warner WAN
X2 -> DMZ
*************   DMZ Interface
X3 -> WAN
*************   Sprint WAN
X0-V20 -> LAN
10.1.101.1   Corporate WLAN
X0-V30 -> LAN
192.168.1.1   Guest WLAN
(CORT250) Cisco 3845 - 10.1.1.250
(CO-WLAN-CTRLER) Cisco 5508 Wireless Controller - 10.1.1.2
(COSW240) HP Procurve 4108GL - 10.1.1.240
(COSW238) HP Procurve 2510B-24 - 10.1.20.238
(CORP-AP-MIS) AIR-LAP1131AG-A-K9 - 10.1.1.79
(COSW239) HP1810G-24 - No IP (Inaccesible but being replaced)
I will now go on to explain our network topology as it pertains to the WAPs and WLAN Controller and how I believe it needs to be configured in order to operate from my perspective.
Our Corporate and Guest Wireless Access is provided via the Sonicwall CONSA251 through a connection from the X0 interface to HP Switch COSW239 which is then connected to WLAN Controller CO-WLAN-CTRLER as detailed below:
Device - Interface Name/Port
CONSA251 - X0
COSW239 - 2
COSW239 - 18,19
CO-WLAN-CTRLER - 2,3
The WLAN Controller currently communicates with all the LWAPs via Layer 3 TCP\IP as I understand it and then routes all DHCP requests and traffic destine for the 10.1.101.1 (corporate WLAN) and 192.168.1.1 (Guest WLAN) to the Sonicwall and vice versa.
Now what I am trying to do is VLAN the LWAP CORP-AP-MIS across the HP Switches to the X0 interface on the Sonicwall NSA240 where it will be able to route traffic via VLAN 20 & 30. The problem lies in my inexperience with HP VLAN configurations and how the ports need to be configured on each device so it can route traffic to the Sonicwall when the WLAN Controller is shutdown.
The LWAP CORP-AP-MIS layer 2 trace to the WLAN Controller is as shown below:
Device - Interface Name/Port
CORP-AP-MIS - FA/0
COSW238     - 16
COSW238     - 25
COSW240     - B4
COSW240     - H6
CORT250     - GigabitEthernet0/0
CORT250     - Se1/0
CONSA251    - X0
Now for all intesive purposes the Corporate Router CORT250 should probably be handling the routing for our Corporate and Guest Wireless network however that was not the way it was originally setup and I have to work with what was inhereted. The Corporate Router CORT250 has a default route to the Sonicwall and the Sonicwall CONSA251 has all the routing already in place for the Corporate & Guest WLANs.
What I would like to do is VLAN off the X0-V20&V30 accross multiple switches and switchports to each LWAP in our building. I do have the LWAP I'm testing on configured with Flex Connect which I understand is required for it to be disconnectable.
Any guidance on how I would go about configuring this accross devices would be appreciated. I know there are some difference between HP and Cisco Switching terms and how tagging, untagging, and trunking works however I lack the experience to apply this in practice especially in a production environment.
I will be happy to provide any additional information or clarification that is needed. Thank you in advance for the help.

Just to add about the ISE... you can profile, but having only one ssid might or might not work in your situation. Also if you end up with remote sites or ap's in h-reap mode, currently ISE cant do any profiling. If you go with the 7500 or 5508/WiSM2, they don't really do an active-active or active backup. They are both up and you can split the load or put all ap's on one, its up to you. I usually split the load just to make sure both are working. I don't want to all of a sudden loose the primary and then find out my secondary/backup is not working.

Enterprise Wireless Mesh License needed for controller and AP's?

If I have a 2112 WLAN Controller and 7 1240AG AP's what licensing do I need to purchase to enable enterprise wireless mesh? Do I need to get the license for the controller (AIR-AP-LIC-M-12)? A license for each AP? Both? Thanks for any replies!

Hi Andy,
You only require the Mesh license for the Controller not for the individual AP's :)
Solution
The Cisco EWM license is required for wireless mesh deployments for the indoor access point platforms, including the Cisco Aironet 1130 and 1240 Series. For the Cisco Aironet 1500 Series, these licenses are not required. These EWM licenses are required for all the WLAN controllers when mesh indoor acess points are associated with the controller. Each WLAN controller has a corresponding EWM license. The license entitles the user to configure as many mesh indoor access points as the controller allows.
The license SKUs are as follows:
â¢ AIR-AP-LIC-RTU=, Cisco Advanced Feature License
â¢ AIR-AP-LIC-M-6, Cisco Advanced Enterprise Wireless Mesh, 6-AP Controller
â¢ ***AIR-AP-LIC-M-12, Cisco Advanced Enterprise Wireless Mesh, 12-AP Controller
â¢ AIR-AP-LIC-M-25, Cisco Advanced Enterprise Wireless Mesh, 25-AP Controller
â¢ AIR-AP-LIC-M-50, Cisco Advanced Enterprise Wireless Mesh, 50-AP Controller
â¢ AIR-AP-LIC-M-100, Cisco Advanced Enterprise Wireless Mesh, 100-AP Controller
â¢ AIR-AP-LIC-M-300, Cisco Advanced Enterprise Wireless Mesh, 300-AP Controller
Cisco Enterprise Wireless Mesh Licensing and Ordering Guide
http://www.cisco.com/en/US/solutions/collateral/ns340/ns394/ns348/ns767/ordering_guide_c07-482365_ps6521_Products_Brochure.html
Hope this helps!
Rob

Virtual WLAN Controller Guest Anchor

We are planning a WLAN upgrade and the security policy is to forward wireless Guest user traffic to the DMZ controllers. We are now considering the Virtual WLAN Controller and all AP's will register with the virtual controllers and we will use Flexconnect for Staff and internal traffic that will switch their traffic onto the local switch.
We wish to forward the guest traffic to the DMZ Guest Anchor controller which will be a 5508 controller. This will also offer Office Extend AP service.
I have looked at teh virtual controller docs and not very clear if this deployment model is supported. Below is a diagram of what we wish to deploy and can anyone advise if thsi is a supprted deployment model.

Well you can use the vWLC to anchor to a 5508, but not the other way around. So if you use the DMZ 5508 for OfficeExtend, you will not be able to anchor the traffic back to the inside. Cisco doesn't support reverse anchoring for a Remote-LAN in OfficeExtend and requires you to actually have the OfficeExtend AP's connect to an inside WLC. In v7.0.x you were able to do this reverse anchor, but it was removed on later codes.
Sent from Cisco Technical Support iPhone App

Nokia Email Problems and Version 10?

Hi All Nokia People
I have an E66 supplied by Vodafone UK.
I run Nokia email which has been working fine up until the last couple of months.
It is set to store emails up to 1 month, but recently it deleted all emails within a month and left a lot over a month old.
Then it removed everything, and now after doing a software and reinstalling Nokia Email it will only store 3 days even though it is set to remove older than 1 month.
Also I have seen version 10 for Symbian S60v5 is available, when will this be available for general download and more specifically my E66?

Hi there.
After dealing with every kind of email problems for about two weeks, I finally solved my issue.
I was carefully watching the imap session logs to understand the problem. I realized all my sessions with my phone was unauthorized. It was stupid and impossible as I imported the server certificate to the phone... But, everything is buggy and possible.
Ok, all my "suddenly stopped connecting", "oh does it support IMAP idle", "nothing is wrong with the great nokia, blame your server", "can't connect email", "does it support imap", "what's wrong with my pop account", "do i have to share my mail password with nokia through email.nokia.com", "what's the difference between native email support and nokia messaging" issues are gone with that.
I deleted the certificate! Since you got it, it doesn't matter whether you delete the mailbox (account) on the phone or not. It stays in the security module of the phone. So, go and delete it first. Then, accept it again on your next connection...
For my E55 device I went to:
Menu -> Control Panel -> Settings -> General -> Security -> Certificate management -> Trusted site certificates
and deleted the certificate for the server I typed for "incoming email server" when I set my account. You'll probably recognize the name of it.
I hope this will help to many out there.

Wlan Controller and NOKIA e66 problem

Similar Messages

Maybe you are looking for