WLAN controller Software Download

Hi There
I purchased a brand new Cisco wlan controller (2500 model) and one access point from a Cisco authorised supplier. Can I register the controller on the
Cisco website to enable access to download software related to this controller? I want to download the latest "AIR-CTVM-K9-8-0-100-0.aes" software
but I am not allowed according to my profile.
So how do I get access to the latest software for my 2500 WLAN controller ?
Regards
Gideon

Can I register the controller on the Cisco website to enable access to download software related to this controller?
Yes and no.
The quick answer is NO. Your authorized Cisco reseller should be able to "attach" the serial number of your WLC to your Service Contract and your Service Contract is attached to your CCO login.
If you go direct to Cisco, it'll take time to get to the bottom of the details plus you need to furnish so many information it's better to get your Cisco reseller to contact them.

Similar Messages

3502i WLAN controller Software Version

I know that the 3502s as well as the 1262s need to terminate on a software release 7.0 or higher on the primary controller.
Now in the event that the primary controller has loaded release 7 and then you have a tunnel to an anchor controller across the WAN for guest access and that controller is release 6. Will this scenario work?
I would appreciate your responses.

That should work, as the tunnel is just passing traffic and not terminating the AP.
In the guest access FAQ, there is a list of the supported anchor/foreign softwares.
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a00809ba482.shtml#Q-Aug08
Steve

Data flow using a WLAN controller

Can someone explain the flow of data from wireless client to some destination in the internal network (or the Internet) using a WLAN Controller? Use a 4402 as an example.
Specifically, I am wondering if client traffic actually passes thru the WLAN Controller (4402). I am reading the configuration guide and it doesn't seem to be explicitly stated one way or the other.

Hi Ken,
This is a very common question these days.
Here is a recent thread as well as an excerpt from a good doc:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddaca5d
In the Cisco Centralized WLAN architecture, LWAPP-enabled access points operate in the lightweight mode (as opposed to the autonomous mode). The access points associate to a Cisco WLAN controller. The controller manages the configuration, firmware, and control transactions such as 802.1x authentication. In addition, all wireless traffic is tunneled through the controller.
LWAPP is an IETF draft protocol that defines the control messaging for setup and path authentication and run-time operations. LWAPP also defines the tunneling mechanism for data traffic.
In an LWAPP environment, a Cisco Aironet LWAPP-enabled access point discovers a controller by using LWAPP discovery mechanisms and then sends it an LWAPP join request. The controller sends the access point an LWAPP join response allowing the access point to join the controller. When the access point is joined, the controller downloads its software if the versions on the access point and controller do not match.
LWAPP secures the control communication between the access point and controller by means of a secure key distribution, utilizing X.509 certificates on both the access point and controller.
From this doc:
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_quick_start09186a00805100f5.html#wp47092
Hope this helps!
Rob
Please remember to rate helpful posts.........

Problem Wlan Controller 5508

Friends,
I have a problem authenticate with AP AIR-LAP1131AG-AK9 to Wlan Controller 5508 (software versión of the Wlan Controller6.0.202.0 ). This AP always tries to authenticate with Wlan Controller. Maybe it tries to download the ios version.
Could be a hardware problem.
I am going to attach the log file.
Thank.
Marco.

*Nov 23 20:28:50.348: %APF-3-AID_UPDATE_FAILED: apf_80211.c:5744 Error updating Association ID for REAP AP Client64:00:f1:12:b1:d0 - AID 4
*Nov 23 20:28:50.348: %LWAPP-3-MAX_AID2: spam_api.c:1045 Reached max limit on the association ID for AP (max association ID 256)
Looks like a great case for TAC.
This is an HREAP AP? It looks like it is associated fine with the WLC (no logs indicating it is trying) but instead it looks like Client Associations are breaking because it thinks it is up to 256 AIDs.....?
Maybe this is a common error, but it hasn't cross my path before...

WLAN Controller Required?

Currently developing a solution to convert simple Windows wired domain to wireless.
Considering using ten Aironet 1100 APs for 200 Windows XP clients on a single network/domain. Clients will authenticate using certificates with RADIUS (IAS) over EAP-TLS. Each Aironet will support 20 clients and will be wired back to the RADIUS server.
What Cisco software is required on the 1100s and what WLAN controller (if any) is required?
Thanks!

If you plan on using the Cisco Unified Wireless Solution, you would require a controller. Different models supports different number of AP's. For 10 Ap's which would be required in your place, a 4402 controller which supports 12 AP's should be a good choice.
The AP's download the code from the controller and hence just need a recovery image. The controller would come preloaded with the software required and you can upgrade to th latest code. Please refer toe the documentation below.
http://cisco.com/en/US/prod/collateral/wireless/ps5678/ps6521/product_at_a_glance0900aecd805df476.pdf
Pushkar

AIR-LAP1310G-E-K9 acces point not joining to 5508 wlan controller

Hi,
I have Cisco AIR-LAP1310G-E-K9 access point and 5508 wlan controller with version 7.0.220 and it is joining to the WLAN controller. I have enabled dhcp in the lan controller and i dont have external dns server. How to fix this issue? Can this LAN controller version will support this access point?
My Lan Controller Management IP Address is 10.10.10.5
Please find the below configuration of 1300 access point.
AP001d.4513.dd68#reload
Proceed with reload? [confirm]
%SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 4 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2052608
flashfs[0]: Bytes available: 5688832
flashfs[0]: flashfs fsck took 14 seconds.
Base ethernet MAC Address: 00:1d:45:13:dd:68
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Unable to get our ip address: no "IP_ADDR" variable set
The system has been encountered and error initializing
tftp file system. The system is ignoring the error and
continuing boot. If you interrupt the system boot process,
the following commands will set IP_ADDR, DEFAULT_ROUTER
and NETMASK environment variables, initializing tftp file
system, and finish loading the operating system software:
    set IP_ADDR
    set DEFAULT_ROUTER
    set NETMASK
    tftp_init
    boot
Loading "flash:/c1310-rcvk9w8-mx/c1310-rcvk9w8-mx"...############################################################################################################################################################################################
File "flash:/c1310-rcvk9w8-mx/c1310-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1310 Software (C1310-RCVK9W8-M), Version 12.4(10b)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 19-Mar-08 19:09 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x003BE9E0
Initializing flashfs...
flashfs[1]: 4 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2052608
flashfs[1]: Bytes available: 5688832
flashfs[1]: flashfs fsck took 2 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1310G-E-K9R   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FHK1133E002
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from reload
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:45:13:DD:68
Part Number                          : 73-8960-09
PCA Assembly Number                  : 800-24963-06
PCA Revision Number                  : A0
PCB Serial Number                    : FOC113000V7
Top Assembly Part Number             : 800-28479-05
Top Assembly Serial Number           : FHK1133E002
Top Revision Number                  : B0
Product/Model Number                 : AIR-LAP1310G-E-K9R
The name for the keys will be: ap.cisco.com
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
ip ssh version 2
    ^
% Invalid input detected at '^' marker.
transport input ssh
                 ^
% Invalid input detected at '^' marker.
aaa new-model
^
% Invalid input detected at '^' marker.
aaa authentication login default enable local none
^
% Invalid input detected at '^' marker.
o
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
*Mar 1 00:00:05.442: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:07.817: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1310 Software (C1310-RCVK9W8-M), Version 12.4(10b)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 19-Mar-08 19:09 by prod_rel_team
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
transport input ssh
                 ^
% Invalid input detected at '^' marker.
*Mar 1 00:00:33.860: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
*Mar 1 00:00:33.860: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
*Mar 1 00:00:33.861: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
logging origin-id string AP:001d.4513.dd68
         ^
% Invalid input detected at '^' marker.
logging 255.255.255.255
        ^
% Invalid input detected at '^' marker.
logging trap 3
        ^
% Invalid input detected at '^' marker.
*Mar 1 00:00:37.440: Logging LWAPP message to 255.255.255.255.
AP001d.4513.dd68>
%LWAPP-3-CLIENTEVENTLOG: Forcing AP to obtain IP address using DHCP
%DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.10.10.46, mask 255.255.255.0, hostname AP001d.4513.dd68
Translating "CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com"...domain server (10.10.10.5)
%LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com
%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com
AP001d.4513.dd68>

Your debug is very telling ..
AP001d.4513.dd68>
%LWAPP-3-CLIENTEVENTLOG: Forcing AP to obtain IP address using DHCP
%DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.10.10.46, mask 255.255.255.0, hostname AP001d.4513.dd68
Translating "CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com"...domain server (10.10.10.5)
%LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com
%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER.CISCO-LWAPP-CONTROLLER.mydomain.com
AP001d.4513.dd68>
What are you using to tell the AP where the contoller lives ? Since you are consoled into the ap you can use the -> capwap ap controller ip address
This will point the ap to your controller
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Cisco website software download disappeared

Does anyone know if there is a known problem with the Cisco software download website? I was looking to download the NBAR protocol pack for the WiSM2 but it's no longer listed as an option (WiSM is there but obviously of no use to me). I can get it for my 5508 controllers but not the WiSM2...
I assume that I am searching correctly as I downloaded the 7.6.120.0 software only last week.

It's just not showing up under the WISM2 page. If you go under the 5508 downloads page the latest NBAR2 Protocol Pack is listed there:
"NBAR2 Advanced Protocol Pack 6.4.0 for AireOS 7.6: NBAR2 Engine 13 (pp-AIR-7.6-13-6.4.0.pack)"
If you click on the Release notes for that pack, they indicate:
NBAR2 Protocol Pack 6.4.0 is supported on the following Cisco Wireless LAN Controller platforms:
Cisco 5508 Wireless Controller
Cisco Flex 7500 Series Wireless Controllers
Cisco 8510 Wireless Controller
Cisco Wireless Services Module 2 (WiSM2)

Cisco 1010AP Can't find 4402 WLAN controller

Hi folks,
I'm running a 4402 WLAN controller running 5.2 code. I've got some 1010APs that don't associate with the WLC. I'm trying to keep the setup basic. The access points are plugged into the same VLAN as the native vlan for port1 on the controller. I've setup a DHCP server in the manner documented. The WLAN controller is configured as a master server. This is the message that I get in the web interface for WLC:
AP with MAC 00:0b:85:6e:4a:90 (AP 1010 #1) is unknown.
Any clues as to what I'm doing wrong?

Hi Daniel,
You won't like this I'm sure, but this is why the 1010 is not working;
**Note: Controller software release 5.0.148.0 or later is not compatible with Cisco Aironet 1000 series access points.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn52.html
Hope this helps!
Rob

Need help for NetWeaver MDM Software Download

<b>Hi.. I need to download Netweaver MDM 5.5 component from marketplace.As MDM not part of 2004s download package so I have to download it separately. I have search all components but i didn't get any link for download. Is anybody can send me download link for MDM ? Your response will be highly appreciated. Thanks is advance.</b>

Hi..
Thanks for your response. I have followed following path as per u r response.But after clicking Netweaver there are 5 diff option but no MDM. When i have click on Netweaver then It gives two options NW 2004 or NW 2004s. So please send me direct link for download if possible. It will be great help from your side and highly appreciated.
software download -> Download -> SAP Installations & Upgrades -> Entry by Application Group -> SAP NetWeaver
<b>
SAP NetWeaver
ADAPTIVE COMPUTING CONTROLLER
SAP CONTENT SERVER
TRAINING CONTENT FOR SAP KW
Technology components releases prior to SAP NetWeaver
</b>
Thanks & Regards
Jignesh

VoWLAN Roaming without WLAN Controller (WLC)

Hi,
Need some advice here. I am trying to implement VoWLAN in a company using Cisco WAP4410n Access Point. The problem is, I've downloaded all Cisco WLAN Controller (WLC) data sheets and can't find any compatible WLAN Controller for this type of Access Point.
Can I still implement VoWLAN without WLAN Controller? Is there any way to provide smooth intercell roaming without WLAN Controller?
Thanks
Regards

I have designed the cells so they have 20% cells overlap. I've also designed the channels so they won't interfere with each other (I use 2 GHz channel here)
But what could be used to replace WLC's role to manage these Access Points? maybe some kind of server?

WLAN Controller 5508 - Latest IOS (april/2013)

Dears,
Can somebody confirm please what is the latest IOS version for the Wlan Controller 5508 ?
Actually I am using
Software Version
7.3.102.0
I see the folliwing at Cisco website
Latest Releases
7.2.115.1(ED)7.3.112.0(ED)
7.0.240.0(ED)
7.4.100.0(ED)
Version 7.2.115 seems to be the latest one (release date 19-APR-2013)... then I see 7.3.112.0 w/ release date 30-JAN-2013...
I thought the IOS 7.4.100 would be the latest one but that release date is 17-DEC-2012
Thats very wierd coz my controller uses a 7.3.102.0.....
Can someone help me ?
What IOS is really the latest one ?
What should be the best one for me ?
Software Version
7.3.102.0
Field Recovery Image Version
System Name
XXX-XXXX-XXX
Thanks in advance!!!

Lets make it simple. There are different trains. 7.0 is one, 7.2 is another, 7.3 is another and 7.4 is another. So if your on 7.2.x, the latest for that version is the .x. Each one listed above is different as far as features so you need to look at the latest for train that your on.
Sent from Cisco Technical Support iPhone App

WLAN Controller can configure as ACTIVE-ACTIVE

Customer is looking for two numbers WLAN Controller (AIR-AP1242AG-E-K9). And they want to configure as ACTIVE-ACTIVE. I would like to know whether it can be configuring as ACTIVE-ACTIVE.
And Is really require WLAN Controller for AIR-AP1242AG-E-K9 access point ? or it can be configure without WLAN controller ?
Please revert me ASAP
Regards,
Manoj

Hi Manoj,
Although WLC Controllers can be configured in an Active-Active type redundancy, you don't need the WLC for small deployments. The AIR-AP1242AG-E-K9 access point can be setup in Autonomous or Stand-alone mode as well :)
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points 12.3(7)JA
http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/i1237sc.html
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
http://www.cisco.com/en/US/docs/wireless/access_point/1200/installation/guide/1200-TD-Book-Wrapper.html
Hope this helps!
Rob

Portege M750 - PCI controller software not installed on Windows 7 64bit

Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
Thanks, Peter

OK cool advice - thanks it is from Intel and is
0x2A44 Chip Number: Mobile 4 Series Chipset
Chip Description: Intel Management Engine Interface
Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
Downloaded, installed and working - thanks for the quick advice!
Peter

I can't download movies. I'm taking a cinema class where the professor provides a link to to a movie to be watched. I am unable to access the link on my mac pro. is there an app or software download that will allow me to do this?

I can't download movies. I'm taking a cinema class where I am required to watch movies. My professor provides the link on an electronic blackboard for the movies. I can't access the link on my mac pro notebook. Is there an app or software download that can help with this? I can access the link fine on a pc.

The "right click" is a function of the OS and those keyboard commands do not work on the iPad at all with the built in virtual keyboard. I don't use an external keyboard - so I cannot attest to the possibility of that working - but there are no keyboard shortcuts with the iPad keyboard.

Communication between : AP and WLAN controller

Hi,
The communication between AP and WLAN Controller is ( Data and Control ) UDP.
Source port 1024 and destination port 12222 and 12223. Actually which device listen to which port or both should listen as control and data can be generated from both the devices.
How does the user ( wireless client) traffic is switched - if user traffic is a TCP traffic. It will be sent to WLANC and then WLANC forwards it to respective VLAN or default gateway ( depending upon the destination in the packet ).
Please explain / share the experience.
any link on cisco.com
Thanka in advance
Subodh

"the LWAPP Control and Data messages are encapsulated in UDP packets that are carried over the IP network. The only requirement is established IP connectivity between the access points and the WLC. The LWAPP tunnel uses the access point's IP address and the WLC's AP Manager interface IP address as endpoints. The AP Manager interface is explained in further detail in the
implementation section. On the access point side, both LWAPP Control and Data messages use an ephemeral port that is derived from a hash of the access point MAC address as the UDP port. On the WLC side, LWAPP Data messages always use UDP port 12222. On the WLC side, LWAPP Control messages always use UDP port 12223.
The mechanics and sequencing of Layer 3 LWAPP are similar to Layer 2 LWAPP except that the packets are carried in UDP packets instead of being encapsulated in Ethernet frames."
Taken from "Cisco 440X Series Wireless LAN Controllers Deployment Guide"

WLAN controller Software Download

Similar Messages

Maybe you are looking for