Wlan does not automatically turn off after anna up...

Hi All
The wlan connection on my N8 does not automatically terminate after using mail and sometimes ovistore after anna update - I have wlan scanning off and power saves enabled -  is there an obvious setting I am missing or is this another nokia power saving concept ?
Thanks in advance
Boothy

Same problem, automatically disconnects sometimes and not others. Its annoying having to manually disconnect the wlan each time.
Plus its happening with the 3g connection, the solid lines appear to say the 3.5g is being used after looking at e-mail from the homescreen widget. Made sure e-mail prog was shut and no apps running and widgets were set to offline mode, but still open 3G connection
before Anna update I used to be able to go to connection manager and disconnect, now the connection doesn't appear in connection manager even though I know its active.
Put the phone in offline mode, then back on again, connection is then dropped and the lines are broken again showing no 3g connection active.
Whats going on, why are the applications not terminating the used connection when the program has been terminated?
(Symbian Anna running on N8)

Similar Messages

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • My iphone does not automatically switch off the display light when locked. How do I fix this?

    I have an iPhone 5 with iOS 8.2 software.
    My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
    The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
    I have tried restarting the phone (using home and lock button), but that did not work.
    Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
    I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
    Thank you x

    Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

  • How do i set my ipod touch to automatically turn off after a certain amount of time?

    how do i set my ipod touch to automatically turn off after a certain amount of time?

    Please check "My Music Timer" app.
    "My Music Timer" can stop iPod touch or spotify playing music.
    https://itunes.apple.com/app/id787182095
    Thanks

  • Does Verizon automatically turn off Data between Midnight and 7 am??

    It seems that both Smartphones I have in the house, one is my Wife's, the data automatically turns off at midnight each night, then turns itself back on a 7am each morning.
    We have had our phones for three weeks now, and we both have noticed this. If we are up and we check our phones after midnight, there is a message saying, "Data Time Restriction Set". I can not seem to find a setting to take this off.
    Is this something that Verizon automatically does each night?
    Both our phones are the Pantech Maurader running ICS 4.03.
    Any help would be greatly appreciated.
    Jim

    Found it!  It's on page 153 of your manual:
    Setting Data restrict time
    1 Tap Apps from the Home Screen and tap Settings > More....
    2 Tap Mobile networks > Data restrict time.
    3 Tap Set data restrict time. It is selected by default. You cannot use
    data during the time.
    4 Tap Start time, adjust time and tap Set.
    5 Tap End time, adjust time and tap Set.
    If you don't have a copy of your manual:
    http://cache.vzw.com/multimedia/mim/pan_marauder/marauder_manual.pdf

  • Podcasts: I want them UPDATED automatically and not automatically TURNED OFF!

    Apple's remote Podcast system management on a Mac is completely backward. 
    The system automatically turns OFF podcast, preventing them from updating (the little ! in a circle). 
    But it doesn't UPDATE any podcasts.

    it's really quite odd that no-one has been able to come up with a response to this!
    Podcasts have never worked very well for me, and even with the new app, they seem to be as naff as ever when it comes to file management!

  • 15-r007TU-Display does not turn on when it automatically turns off after closing lid.

    I just purchased hp 15-r007TU, Windows 8.1 x84. I'm facing a strange problem. After all initial setup, I put the laptop on to download and install all lates Windows 8.1 patches. The display is set to tuen off automaticaaly after 5 minutes. After 5 min it did turn off as set. But then I can not turn it back on. I pressed all (except power) keys, used touch pad, closed lid and opened but it stayed off. Laptop was on and running as I could see HDD lights flickering, I could hear system sounds on pressign mute/volume keys, also I could toggle WiFi with key. I then pressed power off key to turn Windows off normally. I did turn off. I again turned it on, I could see 'hp' logo with spinning wheel and then nothing. Display is off and I don't see start screen. I have to hard reset (press power button for more than 5 seconds) then display is normal. This happens every time the display turns itself off automatically after set time or I close the lid. Only after hard reset it works normally and I see the start menu.
    The power settings I use are:
    1. never put system to standby after preset time. (either on battery or AC power)
    2. turn display off after 5 min. (both on battery or AC power)
    3. when I close lid - do nothing. (both on battery or AC power)
    4. when I press power button - shut down
    I am using Windows 8.1 x64 with all latest patches installed. BIOS updated to lates available. All latest drivers installed.
    I have not yet set password to the system to log in.
    Help would be immensly appreciate. The device is still in warrenty if it needs to be replaced.

    Hello K1200LT,
    Welcome to the HP Forums!
    I understand the computer will not sleep when you shut down the lid. You seem to have already done most of the troubleshooting I would've suggested.
    To be honest,  it is either a hardware or software-related issue. To determine this, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh.
    First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
    Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
    If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • IPhone 4s mobile data does not stay turned off.

    I have an iPhone 4s running iOS 7.1.2.  When I go into the mobile settings and turn off the mobile data on my applications that I don't want to use my mobile data for, when I exit out of the settings and go back in, they have been turned back on.  I've tried a hard reset and doing a reset and then putting the back up back on the phone and none of it seems to help.  Its already cost me an additional $40 on my last phone bill because the settings didn't stay off and my songs auto downloaded even though I had the settings turned off. 
    If there is a fix other than having to reset and not use my backup I would love that, as nothing else I seem to try works.

    Clean the iPhone charging port with a clean dry toothbrush.
    If still problem, iPhone 4S has full Warranty, make Genius Reservation and take iPhone to Apple for resolution.

  • Automatically turns off after about two minutes

    Hi,
    I just got my Ipod iVideo (Latest Greatest) yesterday. Now it works will when connected to my PC and I've been able to load lots of Photos and Songs.
    The problem is that when not connected to the USB cable it restarts after about two minutes. So half way through a song it turns off and gives me the apple screen and then restarts.
    Any suggestions?

    Try to reset (hold center & menu buttons together 6 seconds).
    Or restore iPod using "iPod updater" software.
    Nothings work, then you can return it and get new one from Apple store.

  • Upgraded Cloudon ..now backlight does not auto turn off when not in use.  How do I do that

    Upgraded Cloudon.  Now the backlight does not turn off when not in use.  How can I correct this. Using iPad 1sted

    Is your question for a MacBook Air like your profile says ? You're in the iPad Forum, I could ask the hosts to move your question.

  • IPhone not automatically turning off screen during calls...

    ok, getting sick of this b.s. and i have tried the settings and whatever else i can find... NOTHING WORKS!
    WHY!!!  why when i make calls does it not turn the screen off so that i don't unintentionally mute people or accidentally put them on speaker??!  w-t-f apple???
    also, sometimes when it actually does fade out, it stays feded out... and i have to hit buttons or the screen to wake it back up?!??!  w-t-h apple?!?! 
    anyone else having this problem?  i tried to search the forum and can't find anything on it...
    thanks

    The iPhone 4's proximity sensor is just above the earpiece speaker as shown here:
    If your Otterbox is covering the sensor, it won't work.  Otterbox makes cases for the iPhone 3/3GS and iPhone 4.  The sensors are located in different places, so a case for the 3/3GS won't work for a 4.
    Take your case off and see if you still have the problem.  You may have a bad sensor and need to make an appointment to have an Apple Retail Store Genius look at your phone. http://www.apple.com/retail/geniusbar/

  • Why does the printer turn off after a few hours of sitting idle?

    After a few hours of no use the printer (HP 7510-e aAll-in-one series) turns itself off.    To print I have to turn the printer on.

    Pace,
    Have you tried a "DFU" mode restore as new, without restoring from a backup?
    If my question leaves you lost let me know and I will explain but essentially it returns your phone to it's "Out of the box condition".
    This method has worked for me an many others albeit not everyone.

  • HT4972 My iphone 4 is locked and non responsive  - will not even turn off - after attempting to update to iso 5.  At the same time my computer was tring to update itunes.

    My iphone 4 is locked after trying to update to ISO5.  At the same time I was updating Itunes.

    It takes a long time to update itunes, backup your phone and install iOS6.
    I usually do this in 3 steps:
    1) Without the phone connected (and not using over the air update) - update itunes version.
    2) Connect the iphone and let it do a backup
    3) install the new IOS
    Be patient.....

  • Does not turn off after a few seconds

    My iPhone does not automatically turn off after a few seconds. This new behavior. Is there a setting for this?

    Yes,  Settings>General>Auto-Lock

  • Why does my Sony Sound bar CT60BT turn off after 15 minutes?

    I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes.  Is there a way to change the settings so that it doesnt go into standby mode?

    Hi mdalton1284,
    Your Sound Bar has an Auto Standby Function.
    It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
    You may try resetting the Sound Bar.
    Follow the steps below.
    Use buttons on the remote control for the operation.
    Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
    Let us know if you're getting the same result after resetting the device.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

Maybe you are looking for

  • Why won't my Mac automatically connect to my preferred network?

    My router at home is one of my preferred networks but it won't connect automatically.  I always have to go up to the wifi menu and connect to Home manually.  Why won't it connect automatically?

  • Selecting one period from array (array data selection)

    Hello. I have mass spectrometer which gives me two analog signals (can be seen on attached Data.png picture). The black one is RAMP, which represents nucleous mass number and the red one is intensity of the atom with correspond mass number (in VI I s

  • Quick Time 7.3

    Its probably been asked before but ever since Upgrading to leopard whenever i go onto Facebook all the video applications sent, just come up with a question mark over the QT symbol, i've got Flip4 mac 2, is there another add on i,m missing? please ad

  • Implementing a Signed Applet

    We have an applet that basically gets a *.prn file from a repository and presents the file to the user to print. It invokes the default printer on the client's workstation and sends the *.prn to the printer. The *.prn is then removed from memory so t

  • Junk mail filter doesnt work.. what do I do?

    Back when I was in 10.3.9, I was using Mail ever since we got this G5.. but then the Junk mail filter stopped working and Mail always hung whenever I was sent an EPS graphic.. so I said screw this and moved to Entourage. Been using that, but the Junk