WLAN Driver XP Problem on HP Mini 110 3504TU

Dear all,
I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU
"Network Controller?"
Hardware ID:
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
PCI\VEN_14E4&DEV_4727&CC_028000
PCI\VEN_14E4&DEV_4727&CC_0280
Product Number : XV876PA#UUF
SN : {Personal Information Removed}
My googling results : wlan chipset is Broadcom. I have tried ALL of my search result links (Official HP's Driver Link) on google but just get nothing,
I've tried anyways to install All of Downloaded Drivers Files (my googling's search)
in Normal Setup Sequence and Manual way, via "Update Driver" Menu on Device Manager
but No anymatches found.
Thanks in Advance before...
Regards,
Dave. N
This question was solved.
View Solution.

Hi Paul Tikkanen,
Yes!, your suggested driver is work!
I very appreciate for your help response.. *shakehand*
*Special Big Thanks,
Best Regards,
Dave. N

Similar Messages

Need hard drive model/type for hp mini 110

Hi,
I took my hp mini 110-3518cl to IT today and they told me my hard drive was failing and needs to be replaced. What kind of hard drive do I need to buy? I already tried going to system diagnostics but was unable to find hard drive information.
Product: XZ134UA#ABA
Thanks in advance for any help!
This question was solved.
View Solution.

Hi
Please find the link given might help to get the right information. check page 44 Chapter 4 Removal and replacement procedures.
HP Mini 110-3518cl PC Product Specifications
Maintenance and Service Guide
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Mini 110 bios is asking for a password after MoBo battery got unplugged !!??

I just got the "suprise-we-gave-you-bios-password" error after I was trying to fix a hard drive & keyboard for a HP Mini 110 1116ca. The on-board battery got unpluged and now it asks for a bios password.. grrrr!
Why does HP do this!!?? re-seating a mobo battery & jumper is suppose to reset bios passwords not give you one.
Much thanks if you can help!
error:
CNU9425WSM
This question was solved.
View Solution.

Hi,
Try entering: e9lofxu0hp ( Note that the 3rd character is a lower case L and the 8th is Zero )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HP MIni 110-1030nr - USB Problem!

Hello!
I have 2 HP Mini 110-1030nr netbooks. Mine runs like a charm! I love it!
My dad's however is having major problems! For the first 2 weeks it ran great, but then the hard drive died in it. We sent it back to HP, they turned it around and had it back to us in less then 2 weeks! Great service!
But now, as we have been re-installing his software we have discovered the USB ports do not work right anymore. For example, my dad bought an external Samsung cd/dvd-rom drive. It just doesn't work right. It is unrecognized sometimes, or else it will show up but it can't see that a disc is inserted. Same goes for all USB devices... we attached an external WD Passport Hard Drive and it is not recognized either. The Hard Drive lights will light up momentarily and then just go dark. But when you disconnect the hard drive, Windows plays a little "disconnect sound" as if it knew it was there. Other times the hard drive will be recognized and work just fine, or it will work good for awhile then go dark.
Some items work fine on the USB ports... we have a little Verizon Pantech USB Data Modem, it seems to work good. And a little Sandisk 8GB USB thumb drive seems to work good consistently.
Could this be a power issue? Or something goofy on the mother board?
All these devices work 100% superb on my own HP mini, no hiccups at all. Need help! Need to know if I need to send this back to HP or if there is just a setting somewhere that I'm missing? I've tried going into the BIOS (F10) but there are hardly any options to change and none of them deal with USB.
Thx!

figured out how to remove the hard drive. You remove the battery and there are 3 small phillips screws. Remove and put in a safe place. The screws hold three small metal tabs in place. With the screw removed, take a small flathead screwdriver and push the tabs up toward the keyboard carefully!!! This will lift the back edge of the keyboard nearest the lcd screen up in the air. Then turn the laptop over and grab the back edge of the key you just pushed up and pull it towards the keyboard and the keyboard will easily come off. Make sure to CAREFULLY remove the plastic ribbon connector from the connecctor and that exposes the harddrive. The rest is very obvious and simple. Reassemble in reverse order.
[text removed for privacy]

HP Mini 110 - No audio after replacing hard drive and installing XP

My wife's Mini 110 recently died and I had to replace the hard drive. I got everything up and running fine except for the audio. The driver on the HP site for the 110 will not install as it says that there is no device installed for that driver. In the Hardware list, there is a PCI Device with a question mark and I cannot get it to find a driver. Even after installing the chipset driver and flashing the bios there is not audio device working.
Can anyone out there help? I'd really appreciate it!
This question was solved.
View Solution.

Try and install audio driver from here and check... ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44799.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

My HP Mini 110-1050NR will not start. Power LED, WiFi LED and Hard drive LED Flash

My Mini 110-1050NR just died... When I try to turn it on the Power Switch LED, the WiFi Switch LED and the Hard Drive LED just flash on and off. There's no specific count. They continue to flash until I disconnect the battery.

Hi there
I sent you 1 link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&tmp_task=solveCategory&cc=us&dlc=en&la...
Check this out and let me know
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

How do i re install windows 7 on a new hard drive on a hp mini 110

just fitted a new hard drive in my hp mini 110 can any body tell me how to reinstall windows 7 back on the hard drive i have the bios password so i can change the boot up pref new to this side off computers learning a lot thanks andy

Hi
Please find the link given below might help you check Component replacement procedures 53.
Manual
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

What is the brand for mini 110-4111ej Hard drive?

What is the brand for mini 110-4111ej Hard drive?
This question was solved.
View Solution.

HP uses different brands to fit the need for the SATA hard disk, so there is no specific brand that I can state. Why don't you use the hard disk test that is present in the BIOS?
Replacement hard disk specifications
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Mini 110-3131DX. Hard drive replacement; do I need a new one and where would I get it?

I dropped my HP Mini 110-3131DX directly on it's spine and ever since it only turns on to show the startup screen and these error messages:
HARD DISK ERROR
Please run the hard disk test in system diagnostics.
Hard Disk 1 (3F1)
F2 System Diagnostics
Then, it takes a LONGGGG time to even get me to the right screen to do the test ( I have to restart the computer to be able to renavigate to the screen) and it says Hard Disk test failed. What do I do now? Do I have to put in a new hard drive? Where do I buy my specific new hard drive? I really need some help.
This question was solved.
View Solution.

T4M wrote:
Yes your HDD has been damaged , so you will have to buy new one.
Do you know where I could buy one? I've looked online but I can't find one specifically for my model.

Netbook Mini 110-3830NR How do I create a restore image on a flash drive

I have a HP Mini 110-3830NR Netbook running Windows 7 Starter.
I want to create a restore image to original factory state.
The user manual recommends that I create a restore disk.
It further states that to create a restore image on a USB device, I need at least
a 16GB device.
Therefore I purchased a Hp v165 16GB flash drive that actually contains
14.8 GB of user space.
I could not find the correct info about creating the disk on the HP support
web site so I chatted with an HP Support technician. She eventually gave me
a link to a procedure that would create a restore disk for me.
Then she said I needed a 32gb flash drive !!
Is the user manual or the technician correct ??
Can I use the 16GB (14.8 actual), or must I buy a 32 GB flash drive ??
Thank You fljim

I would just try to create it, the recovery creator should tell you at some point if it is big enough or not, orignally 8gb was big enough for most W7 system's HP sold, but as time passed they had to upgrade the size recommendation to 32gb.
the 16gb should be large enough for your model.
This HP document says al least 8gb minimum, use 16gb for best results, very confusing, I agree
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01890478&lc=en&cc=us&dlc=en

MINI 110-3100 RECOVERY AFTER HARD DRIVE REPLACEMENT

I HAVE AN HP MINI 110- 3100. I'VE REPLACED THE FAILED HARD DRIVE WITH AN HP-SUPPLIED ITEM. THE HARDWARE TESTS ALL PASS. I'VE INSERTED INTO AN EXTERNAL DRIVE THE RECOVERY DISC I MADE WHEN I FIRST BOUGHT THE MACHINE, AND THE DISPLAY SHOWS WINDOWS LOADING. HOWEVER, IT THEN MOVES TO 'HP RECOVERY MANAGER', WHICH GIVES ME ONLY 1 OPTION: 'RUN COMPUTER CHECKUP'. WHEN SELECTED, THIS IS FOLLOWED BY ANOTHER MONO OPTION, 'OPEN A COMMAND PROMPT'. WHEN I SELECT THIS, I GET ' Administrator: x:\Windows\system32\Cmd.exe' FOLLOWED BY 'x:\Windows\RM>' AND A FLASHING CURSOR SEEKING MY (I ASSUME MS-DOS) INPUT. I'M AT A LOSS TO UNDERSTAND WHAT I'M SUPPOSED TO DO - I CAN'T FIND ANYTHING HELPFUL ON THE HP OR WINDOWS WEBSITES. ANY ADVICE WILL BE HUGELY APPRECIATED.
This question was solved.
View Solution.

Hi:
You won't be able to use the operating system for more than 30 days without a product key. It will just shut down after that and lock you out until you provide a key.
Your only option would be to keep reinstalling Windows every 30 days...
That is why I wrote you need to be able to read the product key.
I agree the instructions we a little bit hard to understand, but I was able to make an installation flash drive that allows me to choose several variations of W7 32 bit to install -- including Starter. I was able to find the ei.cfg file.
Go to your device manager. Are there any devices labeled with little yellow ! marks?
If so, please click on each one of them and post the hardware ID's.
If you don't know how to do that, please read the info at the link below:
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...
Paul

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

HP mini 110-1006TU Sata driver for XP

I have my hp mini 110-1006TU laptop which i am going to reinstall windows xp home edition. When installing windows it shows no hard drive. I search on web I found slipstream only solution. For that i need sata driver for HP Mini 110-1006TU. Or any other solution. please help me.

You need the ich7 sata driver found here:
SATA driver
This can make a floppy or extract to another location on your hard drive to use with nLite to create the XP install disk.

How to replace hard drive on hp mini 110 - 1125nr

HP mini 110 - 1125NR
s/n [edited Serial Number by Moderator]
P/N VM135UA#ABA
trying to find out where the hard drive is located.

Hi @von26 ,
Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

WLAN Driver XP Problem on HP Mini 110 3504TU

Similar Messages

Maybe you are looking for