Wlan fritz box 6360 doesnt work,

WLAN doesnt work. imac finds net, but cant connect.
LAN no problem

sohail579 wrote:
Hi All
This is my first post so be gentle!!
I was using my BTOpenreach modem with my Draytek 2830Vn+. Unfortunately the Draytek has now been refunded due to a fault and I'm back on my HomeHub3.
After much research I have found FRITZ!Box Fon WLAN 7390 to be a good replacement for both Modem and Router.
Can anyone confirm this will work with my BT Infinity line and does it perform better than the BT Supplied equipment? How is the wireless perfromance and even the Ethernet Performance?
Also how long has this been out for is it worth waiting for a newer model?
Thanks!
Hi sohail579
The fritz!box 7390 definitly works with Infinity, even with the factory firmware, you just set the VLAN to 101 and NO password needed. Even easier when using newer firmware.
Ethernet performance is just as good, wireless I found slightly weaker signal, but does have simultaneous dual band wireless, so might help you there.
It is more expensive than the Draytek 2750, but does offer far more for the money.
Plug your phones into it, it is also a Dect base station, it has 5 answerphones, VOIP and many many more features.
That is why it is expensive.
If you have your phones connected mine did not give out Caller Indentification , although AVM say it should and are looking into it but after 2 months still not working. Unfortunatly I cannot wait, I must have Caller ID and had to let mine go.
I believe it has been out for about 6-9 months.
So to sum up, if you really need all the fetures go for the Fritz, but remember (my caller ID) was not working
If you dont need all the features drop down to the Draytek 2750n and save a bit of money.
If you go for the Fritz , the cheapest place I could find for the International version was in France.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Similar Messages

Cannot connect to WLAN because FN+F8 doesnt work!?

Can anybody help or I have to get my notebook to guarantee. I have problem with wireless capability of my computer because FN+F8 doesnt work. I bought my notebook 3 days ago and thats very big problem for me. I have to get to wireless connection.
Please help
Riuno

I had the same problem on my new L300 laptop and the wireless adapter couldn't be found.
I was advised by my dealer that this is a problem that the software was not installed by Toshiba and the solution is to
create a backup DVD and reboot from that.
I created the DVD and the machine advised me to shut down & install some updates that had materialised.
The updates solved my problem.
I didn't get as far as rebooting from the DVD.
I don't know if the process of creating the backup opened the wireless driver, or whether while searching this forum (using a cable) the computer automatically checked for windows updates, but any way, it now works!

Satellite L500: WLan drops out and doesnt work most of the time

hi everyone, i have a toshiba satellite L500 running windows 7. have been using iprimus internet, wirelessly, no problems for a few weeks,before that, was using it via ethernet cable as i didnth ave a wireless modem. my laptop was off charge the other night and went flat, next morning when i woke up and turned it on, it wouldnrt connect to the internet.. after hours and hours of phone calls to iprimus, and numerous winsock resets, ethernet cable testing, and modem resetting, they tell me that the problem is within my laptop...
So i rang toshiba.. and they got me to go into device managers, and then network adapters, and disable, actually uninstall the wireless drivers, then reinstall.. and it worked.. finally... (forgot to add with all the iprimus confusion someone had reset my passowrd and i had to configure that to the laptop..
so anyway, after all these calls, i did a complete restore of the laptop, and wiped everything and reinstalled it all, and therefore reinstalled the modem. this time in modem setup it was telling me the wireless network adapter was unplugged, and would only let me set it up via ethernet..
now earlier today i did have the internet.. but it dropped out randomly.. webpages will go slow, sometimes it will reconnect, other times it wont. now i thougbht i might try and uninstall and reinstall the modem again,s ame error, and this time, cant get on wirelessly at all.
ive googled to see if others ahve had this problem.. and seeing what other people wrote, i went into my battery settings, and checked the WLAN didnt go into sleep mode etc, and ive also checked everythings enabled. ive no idea what to do,, neither iprimus or Toshiba will give me any anwers, both companies are just blaming each other lol
so i
it does appear to be my laptop, as all lights are on modem.. and iprimus keep telling me its not registering with them ( the disconnections) so it must be my wireless. though everytime my laptop dropped out of internet, so would my bfs iphone we were testing, and so did my other laptop which is partially stuffed but could normally still connect to the net.. so thats telling me its a modem problem.. ive no idea what to do.. and cant keep this via ethernet on the bench in this new hosue ive moved into,as with 2 kids under 3, thats just asking for trouble..
anyone have any suggestion??
thanks in advance

wel after many more phone calls to iprimus, i finally found a helpful indian, who ran me through the modem setup AGAIN like everyone else has, this time in its security settings, he got me to change the wireless signal channel from 2 to 9, said that would improve the signal, every other person when explaining the issues i was having, always told me to set it on 2.. so this has improved it dramatically in the day, but at night, particulary around 830pm, it drops out over and over and over...
would this just be a faulty modem, and perhaps buying oen from a harvery norman etc would be better?? or could it just be iprimus as a whole with there wireless coverage? im not in an iprimus area, theyve borrowed the lines of telstra or something.. so im on a crappier plan in this new house, and dont have adsl2 just 1500 speed. would this have anythign to do with the poor reception, or perhaps is there something in my house interfearing, or in my neighbors house? there is a satelite here, but no actual foxtel connected, looks as though it has been before. there is also an alarm here, not in use though.. ive not even seen if it turns on..

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

I have an iphone 5 that i trade with a family member they have coverage on it. now the iphones sleep wake button doesnt work sometimes can apple replace my iphone even if i dont have the box or recipit to the product or can they just repair it?

i have an iphone 5 that i traded with from a family member. its has coverage but now the sleep/wake button doesnt work sometimes. can apple replace my iphone and give me a new one or is it just something they can repair? i dont have the box or recipit to apple care or the iphone

Apple can fix it without your receipt or box. They pull the serial number from the device and determine warranty status from that. Hopefully ApplCare was registered to the product before you lost the receipt though. If not, you can go back to the point of purchase and obtain your AppleCare receipt and Apple can help attach it to the iPhone.

When i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt !

when i plug my ipod shuffle 4th generation in a box pops up and says the right files for this ipod isnt on the system?? sooo i re downloaded itunes and it still doesnt work soo i deleted it all and eredownloaded itunes all up to date and it still doesnt ! any help please

What was the exact error message you received? When you removed and re-installed iTunes, did you use the precise instructions in this Apple support document to walk you through the process?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock

I can't send messeges with my ipad, always appear a box asking me to sign in, but it doesnt work, what can I do?

I can't send messeges with my ipad, always appear a box asking me to sign in, but it doesnt work, what can I do?

Are you talking about iMessages or email?

Slideshow Music problem!!!! It doesnt work like it says it on the box.

I have put together some slideshows and i find every time there is a problem with the fit to music option when i select a track from my itunes library. If i let it run fine it works but if i press fit music to slide show then the track goes into a total slow down and even if i reselect another track it still repeats the same problem. ive tried with 20 slides to 40 slides. So at this point I am certain that this part of the program does not work properly. i see this problem all over the internet so adobe fix it please. Its a simple option so it doesnt take rocket science to press 2 buttons.. but these buttons dont work. Selling something that doesnt work sends me rushing back to aperture. Anybody else got this problem..u bet. fire the guy who is wasting my time having to write this.

fourwalls4 wrote:
So, are you going to share the solution because I have run out of vriables to play with.
There are a couple of ways to get around this limitation. The "right" way is a pain. The "easy" way is potentially problematic.
Bottom line: The transitions and slide duration boxes only allow precision down to a tenth of a second. If your song length and slide count don't divide up to an integer of tenths of a second, you can't fix this in the UI. If they do, it's possible the tool won't choose these properly due to roundoff error.
My suggestion is to select songs/slide counts so they do divide up into an integer number of tenths of a second (that's the problematic part) and then manually pick a slide+fade time to match that. If you can't do that, you might need to add a tenth to one or the other from what the tool chooses, but then your show might finish just before the song does.
The "right" way is to manually edit the template, where unlimited precision (well, I suspect it's 32 bit floats or something) is allowed. That's a pain.
Lightroom shouldn't force either solution onto you, but the 0.1s precision is currently the limitation here (not the math education of the team, a few of whom hold advanced degrees in mathematics and related fields). Hopefully, the team will fix that problem.

My safari is not working. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen stay

. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen and stays like that.

If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

C3 is connected to my wlan but doesnt work

The phone says its connected to my wireless internet but when I try to use the internet it doesnt work at all. Opera etc....just bought it...dunno whats wrong...help

My iPad is connected to my computer, but it still will not download newly purchased apps.
Launch iTunes with the iPad connected to your computer.
Select the iPad under Devices in the source list left side of the iTunes window.
Select the Summary tab from the menu.
Deselect: Sync with this iPad over Wi-Fi
Quit then relaunch iTunes.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an ipod touch 4th gen and I have songs on it which I cannot remove, even when I sync it and untick the songs they will not remove from the ipod, doesnt work manually either, help

I previously had an ipod nano but now have an ipod touch, when I synced it for the first time I got songs on to the ipod which I dont want, I have tried unticking them in itunes library and this doesnt work. I have also tried going to summary to remove manually but it doesnt show any songs in this box to be removed. Can anone help please.

Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

Calculations in Page /Dashboard Prompts in OBIEE doesnt work for me .

Hi ,
Iam trying to create a Custom Aging Report instead of using the OOB Aging report . In the report I created column ( only at this report level) "% of Outstanding Amount in AR Past Due 1- 30 Days" by changing the "Fx" and Now I can see the $$ amount that customer has due as well as how much % is that in the total Outstanding Amount. The report is coming good. Now I have a business requirement that the groupings such as 1-30 , 31-60 , 61-90 , and 90+ should be given in dashboard prompt . I could create 1-30 , 31-60 , 61-90 but 90+ ( 91-180, 181-360 , 360+) prompt is not working as I tried to concat these three groupings and iam getting the error message as " Un resolved column error , Concat Function does not support." and other thing when i tried to create a calcualted % prompt even that is giving me error message as " Unresolved colum. I think the Calculations doesnt work for Dashboard prompts ..but iam not sure ..May be Iam missing somethg , Can anybody pls help me in getting this fixed . How to create a calculation for page/Dashbaord Prompts ...I tried using the sql too but still it gives the error.
Please help
Thankyou
Karthik

In your dashboard prompt properties you need to tick the 'Constrain' box for all the columns that you want be constrained by the other choices, e.g Year, Quarter, Month.
Only tick Product Name / Order Name if you want these to be constrained also but bear in mind it could cause a performance delay if you are having to join tables to get the constrain.
Hope this helps,
Regards
Alastair

LMS4.1 OGS doesnt work for Eventconsole/Syslog

Hello,
Device selection doesnt work for Monitoring=>Eventconsole/Syslog, but you can filter with the filter function inside Eventconsole/Syslog
but without the possibility for device filtering. Message-Box "No device found ... " will appear also with selecting "All devices"
Device selection (OGS) works in any other applications - with being extremly slow for nested user defined groups btw - including to generate syslog reports from report generator.
Because Spectrum is used for FM in this network, customer will save resources at the slow GUI responding LMS server and switched DFM off, by deactivation at Admin > System > Device Management Functions.
Is the device selection issue in Monitoring=>Eventconsole/Syslog a known bug and can count with a bugfix in future?
Steffen
P.S.: after switching the GUI to https, the syslog subscription has been stopped due to a cerificate trusting issue. I expect from a prime SW that this should be included in the https mode switching automaticly.

Please try the following steps:
1. Stop the daemon manager (Net stop crmdmgtd).
2. Regenerate the SSL certificate (Dont forget to start you shell/command prompt session as Administrator):
     *Remove server.* files under NMSROOT\MDC\Apache\conf\ssl (take backup of all 4 files before deleting).
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -disable
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -enable
     *Fill all the details it request for.
     *Ensure that the following files are created under NMSROOT\MDC\Apache\conf\ssl :
server.crt
server.csr
server.key
server.pk8
3. Start the daemon manager (net start crmdmgtd).
4. Try to access the GUI with https://xxxxxx:443.
-Thanks

Flash player doesnt work on safari, even with the last version 11.6

hello,
Since yesterday, my flash player doesnt work on safari (OS X10.8.2). I tried to update flash with the last version (11.6) from adobe website, but i still have the same probleme. Can you please help me ?
Thank you

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

Equium M40X: WLan card drivers don't work

Hello,
I just installed fresh WXP and I can't find wireless drivers in internet. I found 3 or 4 drivers but the device is still not working.
Any idea where to look or what to do?
Cheers,
Bilas

What do you mean with still not working?
Can you see the WLan card if you enter the device manager?
Are there any yellow exclamation marks near to the WLan card?
Usually on the Toshiba driver page you should find all necessary drivers also the WLan card drivers. I cant believe that this driver doesnt work.

Wlan fritz box 6360 doesnt work,

Similar Messages

Maybe you are looking for