WLAN icon changed when update to firmware 013.016 ...

Its that true when updating to firmware 013.016 on Nokia C6-01 and user will get then new WLAN icon?
Nokia C6-01 firmware v013.016
16GB MicroSD Class 4.
History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

but..the new wlan icon look too small or look very transparent..
Nokia C6-01 firmware v013.016
16GB MicroSD Class 4.
History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

Similar Messages

  • Failure when updating E61i firmware.

    Goodday everybody,
    I have a problem with my nokia,
    I have the first firmware on my E61i and I want to update it to the 2.066.035 (or something) and the updater does everything what I want, even downloading the firmware! When it has finished with downloading it starts with installing, but a short 10 seconds later it appearce that the firmware couldn't install on my E61i after some times I gave up and I closed the updater-program, short time later there is a pop-up from the updater what says: an internall communication error.
    Did somebody have this too? and how can I solve this problem?
    thank you

    here is a good place to start with that error:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod

  • Icons changing when downloading reader, why?

    When I download any version of reader, all my desktop icons change to PDF icons. Running Windows 7. What's happening?

    I don't know the why, but this should be useful for correcting the problem:
    http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html

  • C7 restarting after update firmware 013.016

    Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
    sorry if there are some mistakes in english its not my language but I think that you understand problem

    I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
    So they think, that's the software problem,I didn't send phone yet,  I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
    "Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
    I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
    I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
    The phone is great I loved him but these bugs kill my love for him.
    I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
    I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
    I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

  • Does ATT icon change when not on their home network?

    Since the ATT contract only allows a limited amount of off network phone use, does anyone now how to tell if I'm out of their network?
    Right now, I'm in Vermont which according to AT&T's coverage maps isn't part of their home network, but my iPhone is showing AT&T with five bars.
    Does the icon change to a roaming icon or to an extended network icon if you aren't in an AT&T home network?
    - Hardy
    http://www.pointatme.com

    Bumping this since people now have more time with
    iPhones. Has anyone seen the ATT network icon change
    to roaming or anything when you are not on ATT's home
    network? I think I live on the edge of an ATT and an
    extended ATT network provider. I don't want to lose
    my contract if I make too many calls on the wrong
    side of town, but the icon never changes. If it shows
    ATT then can I assume I'm on their home network?
    Hardy Macia
    http://www.pointatme.com/
    Well, as long as you can call, you're either on their network or you're on one that has a roaming agreement. Cingular/AT&T has wide coverage, so I'm not sure where you'd find it. I'll be going to Europe soon (and I am going to get tons of questions from the locals I'm sure)--when I had other phones that always showed T-Mobile, when I got there it would show Orange, T-Mobile, Vodaphone, whatever. It was cool.
    That will be the best test.

  • Modification Date changes when updating Open With?!?!

    Forgive me if this is mentioned elsewhere. I have been searching these forums and not seen this problem.
    If I do a 'Get Info' on a file in the Finder and change the application it opens with, the Modification Date changes to 'now'. Why in the world would this happen? This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file. I am simply changing the OS's metadata about which app to use. This info isn't even stored in the file itself, as evidenced by burning such an document to a CD or moving it through a network server then opening it on a machine with different default apps for certain extensions.
    Is this just another wacky step backwards in the world of the Apple OS X Finder, or am I missing a way to avoid this?
    PowerMac G5 2.5DP   Mac OS X (10.4.3)  

    This is not how 10.3.x worked, and certainly doesn't make any sense since I am not actually modifying the file.
    Actually, I am using "Panther" now, and can confirm that changing the application to be used to open an individual file through "Get Info" does in fact change the modification date.
    When the "Change all" button is used, the modification date of other files of that type won't be affected by this change since that modification is presumably made somewhere in the "Launch Services" database to set the "default" application to be used for that file type. Perhaps this is what you were thinking of.
    However, for that first file (or any file changed individually), the file is in fact modified, and the "Open with" information is stored with the file, in its "resource fork". Usually, a 'usro' resource (specifying the application) and an 'icns' resource (for the app's custom icon for that file type) are added. You can try this yourself - drag any image from Safari.app to the "Desktop" and open the info window for that image - such images usually don't have a "resource fork". Make note of the file's size, then change the "Open with" application. You should immediately see an increase in the file's size (to account for the addition of the "resource fork") accompanied by an update of the file's modification date to reflect this modification.

  • TS3694 How do I solve error 1015 when updating the firmware????

    Can some kind person please help me with this problem? I have the latest iTunes and I have now tried 4 times to update my phone and I get the same message everytime, Thanks

    You will get that message if you tried to downgrade the firmware. It is usually associated with jailbreaking, and if that is the case there is often no way to fix it.
    Try to force it into restore mode:
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
    Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    When the iPhone finally appears in iTunes, choose "restore from backup".

  • Why doesn't the icon change when I go to different websites-example yahoo doens't change to the purpe circle with the y inside?

    When I pull up mozilla, I have a gray circle in front of the att homepage. When I go to yahoo, this icon doesn't change to the purple circle. The gray circle remains in the address bar before any website . -possibly only unsecured websites since I see that I have a picture of a lock when I was directed to this website. This recently happened and it occurs every time I pull up the browser.

    I have been going crazy trying to figure out what was wrong. I was ready to take my computer in. Thanks so much for informing me of this -now I can rest easy . have a great day. Angela

  • FM 10 xref format changes when updating file

    I'm authoring in structured FM 10 using a DITA 1.2 application on Windows 7, but working with FM documents rather than XML files. I was having problems updating cross-references in my existing (structured FM 7.2) files after upgrading to FM 10 -- FM was changing all xref formats to DITA Default Format, which blew away all of my defined formats. So I opened one of the standard structured templates included with FM 10 (DITA_1.2/app/technicalContent/template/topic.template.fm), thinking that I set up my structured application incorrectly.
    I know I must be missing something simple, but this is what happens when I create and update a cross-reference:
    Using the unmodified structured  template and the unmodified DITA 1.2 application that comes with FM 10, add an fm-xref element.
    Using the DITA-Cross-Reference dialog box, create the xref (doesn't  matter if it's an internal or external xref).
    Select See_Title_and_Page xref format. Xref looks fine in the source document.
    Select Edit > Update Reference, and select All Cross-References.
    When I click Update, FM updates the xref but changes the xref format to DITA Default Format. I can see that the See_Title_and_Page format included in the template uses the <$paratext> building block instead of <$elemtext>, but  I can't delete or modify this format and I can't create a new xref format, either, since the DITA  Cross-Reference dialog box doesn't give me those options.
    However, if I create a new FM book and add this file to it, and then  select Edit > Update Book, and select All Cross-References, FM  updates the xref and maintains the xref format I chose.
    So, why does updating a file remove the selected formats from all xrefs and replace them with DITA Default Format, while updating a book does what I'd expect (and what FM has always done)? And why can't I modify an xref format using the template/DITA 1.2 application that comes with FM10?
    Thanks for any assistance.
      --Steve

    Hi Saurabh,
    Thanks for the reply. I guess it's reassuring to know that the automatic reformatting of xrefs by FM isn't due to something I've overlooked. As long as there's a workaround, I'll keep updating xrefs from a book. Not a great workflow, but it won't block our writing for now.
    On the other issue: Thanks, I do know how to edit xref formats and import them from a template. My confusion, however, stems from two things:
    I can't edit xref formats in the DITA Cross-Reference dialog box, which is all you see if you're using the DITA 1.2 template that ships with FM 10. I can edit the formats from the Cross-Reference dialog box, but I can't figure out how to access that when using Adobe's template. Adding a new xref or selected an existing one just activates the DITA dialog box, which doesn't have an Edit Format option (shouldn't it? wouldn't you want to be able to edit those formats? or do you always have to do that from one of the application files?).
    The DITA Default Format won't go away. In my own docs (DITA 1.1 FM files), I can get to the Cross-Reference dialog box and edit xref formats. If I delete the DITA Default Format, save the file, close it, and then reopen it, the unwanted DITA Default Format is back. I can reapply the formats and element defintitions from the template as much as I like, but any time the file is reopened the deleted format reappears. It won't die, and I have no idea where it's coming from (definitely not the template or the EDD, which I've checked and reimported). Is this some odd default behavior of ditafm_app.dll?
    Again, thanks for responding.
      --Steve

  • When updating iphone firmware to 5.1 on my phone it says error downloading firmware, When updating iphone firmware to 5.1 on my phone it says error downloading firmware

    When im trying to update my iphone 4 from 5.0.1 to 5.1 via wireless network (straight from my phone) it downloads the 5.1 firmware almost to the end and then it says problem downloading firmware, and i dont have my computer right now so it would ve really nice to update straight from my phone. If someone have had same problems or knows how to get it work please tell me i'd appreciate it, thanks !

    Hello UKFan643,
    It sounds like you are seeing more data being used on your iPhone than you expect.  Sometimes other data is being used by information like contacts, calendars, the iOS software installed on your device, settings, and other system resources.  I recommend reviewing the following articles to learn more about storage capacity on your iPhone:
    Understanding capacity on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1867
    How OS X and iOS report storage capacity
    http://support.apple.com/kb/TS2419
    If you are still seeing more "other" data than expected, it may be that the iPhone was disconnected during syncing:
    In the case of iOS device becoming physically disconnected in the middle of syncing music, podcasts, videos or photos, it's possible that orphaned files will be left on the iOS device. This can prevent iTunes from syncing the iOS device on subsequent sync sessions.
    One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
    You can find more information and steps to resolve this issue at the following link:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error when updating the firmware

    I get this error after trying to install the new firmware ????????
    this after the process of closing the tablet........
    Tablet Xperia Z on stock 4.4.4
    Galaxy S2 on 4.4.4
    Solved!
    Go to Solution.

    PC Companion installed on my Win 7 machine detected the Xperia Z Tablet (312) asked if I wanted to update and started through the process.
    I have tried it a number of different ways and always with the same result.
    The update gets downloaded, the process starts and PC Companion says basically...  "Your tablet will be shut down during the update, don't touch it!"
    The tablet shuts off, I hear the USB disconnect tone on my PC.  PC Companion continues for about 30 seconds and then displays this message.
    "There is no software available for your phone"
    It's sort of amusing that the same software that just informed me of an update and downloaded it is now telling me there is no update available!!!
    I have changed USB ports, done a FULL reset of the Xperia Z including wiping all data.  It's absolutely wiped clean and booting 4.4.2.
    Common Sony... did you test this process first?  I did searching on the forums and apparently this very same problem has been common on some of the Xperia's in the past.
    This should be the simple part.

  • Safe to use Dock when updating iPhone firmware?

    When future firmware updates become available for iPhone via iTunes, is it safe to go through the update process connecting the iPhone to my MacBook Pro via the Dock or must it be using the cable only?
    I read on an online forum that one user tried updating to 2.0.1 with the iPhone connected to the dock and it bricked it.

    I use the universal doc to connect my iPhone to my iMac and there are no issues.
    I did notice that there have been many posts in here regarding loosing music, contents, photos, etc and apps not working when using iTunes 7.7.1. So update/sync with caution. The iPhone would only be bricked if you did anything that Apple does not want you to do.

  • Icons move when updating

    This is just an annoyance really, but if any of the Apple developers read this, maybe they can correct it.
    When I apply app updates right on my iPod, the apps that need to be updated move to the last positions on the last screen and update there. I then have to rearrange the app icons back to their preferred positions, or just do the updates on the desktop and sync after. This is a pain. I want to be able to install an update while out in the field and not have my icons moved around. I have several pages of apps and really hate to have the one I use the most move to page 4 when it's normally on page 1. Please fix this!

    I noticed this myself and agree that it is a pain. I read another post that advised iPod touch users not to install apps via wifi. The post stated it was screwing up the OS. I found that iTunes would go into a kernel panic after certain wifi installs. Since then I have only updated while docked to my iMac.
    Of course this is nothing compared to the slow backup problem that is fixed with the new upgrade. Maybe the icon problem is fixed. I got the update but I am going to wait on wifi upgrades for a while.

  • Why data in PSA doesn't  change when update rule routine is modified?

    Hello guys,
    why data in PSA is not changed after I modifiied the update rule routine. I created a infopackage which is only to PSA, but it shows me any change. If I changed this infopackage to the one which is assigned to "PSA firstly, and then to Infoobject", then I saw the changes in infoobject, but in PSA, still nothing changed.
    I can't figure out the reason. Any hint is welcome!
    Thanks in advance.
    Regards,
    Liying

    HI..
    1) PSA data is like of source system data
    2)Update rules are how you update your keyfigures to Data Tragets.
    Since you have put upto PSA that is the first data staging in BW so there wont be any change of the data even if you write routines at update rules.
    Hope it is clear
    Reg
    Ram

  • Source system icons changes when connecting SAP BW to mySAP ERP 2004

    Hi,
    Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
    I thought it would be interesting to share!
    The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
    Scenario:
    The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
    Observation:
    In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
    <b>As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".</b>
    Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are <u>based on SAP Web AS 6.40 or greater</u>
    Why?:
    The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract <u>both</u> from the internal BW System <b>and</b> from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
    Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
    Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
    Another related observation:
    I would expect that this case will probably be true even if you only use the internal SAP BW.
    Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
    Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
    Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
    user master and authorizations are client dependent
    I hope this was interesting.
    Cheers,
    Mike.

    Hello,
    I used my user id to login. I recieved a message :
    User already exists in source system  I continue:
    Anothre window pops up : "Check  RFC connection" and it asks
    'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
    Here I select Use - but i get an error : Error in source system'.
    how can i track down this error.
    Kindly inform.
    Regards,
    Nikekab

Maybe you are looking for