Wlan modus not working

Hi, my wlan is not working.
I can not move the wlan button to turn it on.
What do I need to do?

Hi there.
You may find the article below helpful.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
-Griff W.

Similar Messages

  • Lan and WLan does not work on Satellite L40-18W

    Hi all
    I have TOSHIBA Satellite L40-18W and my problem 1- wireless not work & wired lan does not work.
    I have download driver and every thing is ok but it does not work ( when i search by wireless i do not find any network. My router is working fine)
    plzz help meeeee

    Hi
    Its hard to understand what you mean by not working.
    What does this mean exactly?
    Are you not able to connect to the internet or what?
    Usually if the WLan card and the LAN card have been recognized properly in device manager then the drivers are working fine and the issue could be related to wrong router configuration or maybe to some enabled firewalls, etc
    Firstly I recommend checking the router settings. Check if the router has been configured with the right data from ISP and if all other common options have been set correctly.
    The notebook supports Realtek Wlan and LAN card.
    Check if Wlan card uses the same WLan standard like the WLan router and if right encryption has been used too.

  • Equium L40-156 - Indicator WLAN sometimes not work

    Hello peoples - has anyone any idea wha this is bout?
    I cant seem to find a similar problem anywhere. The indicator light for the wireless connection will sometimes not work - as a result i have to manually go into network connection and turn on wireless cap. - this will not turn the light on but does allow me to access the internet.
    This happens for a few weeks and then it all rights itself for a few weeks,
    Then it happens again.

    Hi
    Do you mean this issue happens sometimes but in most cases you can enable the WLan properly?
    First of all to enable the WLan you have to move the WLan antenna switch to ON (be sure that it has been switched properly to the right) and you have I use the FN+F8 key combination.
    Usually this enables the WLan.
    Im not sure why the WLan antenna switch does not work sometimes maybe its a hardware issue; for example loose connection or the switch was not moved properly who knows
    Maybe it would be a good idea to ask an technician for a WLan switch check...

  • Fn f5 switch for wlan did not work - no wlan connection​s listet...

    Hi,
    my english is not very pretty...
    My system:
    W510 4319 2-DG
    W7 Ultimate 64bit
    I have problem to get my wlan working.
    The adapter drivers are installed over the latest
    driver software installer from lenovo:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/6mws21ww.exe
    and not  by the hardware manager - but i did try that also...
    After installing rebooting i can not switch the wlan button under fn+f5 on or off - nothing happens!
    LAN and WWAN  works good but i can not make a connection to my wlan router (or any other wireless station)
    If i try to make a new wireless connection manually in the network center i become a error message
    Here some png´s as documentation:
    Trying to add a new connection manually:
    LAN & WWAN are present but no WLAN entries:
    fn+f5 wlan switch is not working and always in off mode:

    Maxon:
    I suggest that you go to 'Control Panel', then to 'Network and Sharing Center', then click 'Change Adapter Settings', and once you are there, make sure that you do not see a red 'X' beside your wireless connection.  If you do, you might want to examine the 'Properties' of the Wireless device to make sure that all is in order.
    You might also want to go to  'Control Panel', then to 'Device Manager', and make sure that the wireless device (which will be listed under 'Network Adapters' is not disabled.
    Glück...
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • Satellite M70-181: Wlan does not work

    Hello,
    I am in New Zealand at the moment and a couple of weeks ago I changed my bios password but forgot it. To solve that problem I send the laptop to Toshiba in Christchurch and they reseted it for me. But since that day my wireless does not work. When I turn it on not even the light goes on. It's not shown in any of the normal places (as in the network enviroment or how ever you call it).
    Could it be any problem with the hardware and is it easy to fix by myself cause I don't have the time to wait till they do it in Christchurch again.
    Thanks for any answers

    They might have damaged wifi card antenna inside you computer. If you have technical skills you could fix it by yourself, but if you don't just send the laptop back, and let them check it again.

  • Tecra S3 - Wlan does not work after Win XP installation

    Hello everyone,
    I have recently purchased a Tecra S3 PTS30E-0TL059GH without operating system.
    I've installed WIndows XP professional.
    Everything works, except for the wireless lan. I can switch it on, but it doesn't seem to find the right drivers.
    The device manager states problems with the networkcontroller and two other unknown devices.
    I've installed all drivers from the toshiba website, but it still won't work.
    Any help is appreciated!
    Thanks!

    Hi
    I think the notebook supports INTEL 802.11 B/G WLan card but I'm not 100% sure about that...
    In my opinion you should try to identify the WLan module.
    How to do that?
    In such case the usage of the PCI database should be very helpful.
    More details here:
    [How to identify an unknown device (e.g. Wireless LAN module)?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]
    Knowing the exact WLan specs, it should not be a big deal to get the right driver.

  • Ipad1 with WLAN and 3G but WLAN does not work without SIM Card

    I do have that Problem too.
    Ipad1 with 3G and WLAN.
    But... I do not have a SIM Card. I only use my home WLAN.
    I am sure WLAN works and is correct installed (I did the same to my iphone and it works there), AND I can controll my Samsung TV with the Ipad, which only works when both use the same WLAN. So it is installed perfect for sure.
    But: when I use safari it shows the URL, but than says there is no connection possible.
    Why this?
    Do I have to install a SIM Card? How is that? I did not mention to do.
    My iOS Software is 5. something (the newest that was possible) since this was a original iPad, never used before.
    I installed it with iTunes. iTunes says that the connetction failed BUT all my apps, music and anything else I have from my iPhone are now on the iPad.
    Do not understand whats going on.
    Again - sure it is on the wlan, but the iPad won´t let my out to connect the world.
    Bad since I wanted to use it in the house to read/write emails and for my schedule.
    please help soon.
    Thanks

    A blinking blue dot on a grey screen. In my opinion it doesn't work if that's all you get.
    As mentioned in the above thread, there are app store apps (TrackThing, gpsCompass) that will read out your actual position, speed, direction, in numbers, so you can see where you are on a map. (You remember maps? those quaint old world methods of finding where you are?).
    This is quite useful in the back country, where cell signals may not reach. I've used gps Compass in the mountains where there was no cell signal. In my case it took about 2 minutes to find the satellites the first time but after that it was very fast.
    Its not a substitute for a Garmin, but with a paper map you can still find exactly where you are, and were you are going.
    (If you don't know how to navigate with maps, compass, and longitude/latitude numbers, you probably don't belong where there are no cell signals.)

  • WLAN Driver not working (Tecra-R950-116 PT534E-00E00CGR)

    I'am stuck with installing the WLAN Driver for the above mentioned Notebook on our preconfigured Windows 7 64bit image.
    It seems to be a combined WLAN and Bluetooth Card (Atheros AR9485WB-EG Wireless). Unfortunately the problem is complicated by the fact that the Modell is NOT in the Support database of Toshiba. maybe because it was custom tailored for our organization.
    So neither "autodetect my Model" or entering Serial number on Toshiba Support works, just yields "Model not recognized". Not very professional.
    After putting the Image on the Notebook there are 4 unrecognized devices in device Manager.
    One is labeled Network Controller, 3 more are unknown.
    I downloaded the official Driver for Atheros from Toshiba homepage.
    It installs without error message but device is still shown as non-functional in device Manager.
    In Toshiba Support Forums I picked up the tip to install BT Filter Driver package first but didn't help.
    I tried 3rd Party Drivers. There was an constant error of either "Access Violation" or "file not found".
    I didn't save the Image the Notebook was shipped with.
    Ordering recovery media would lead to big administrative Overhead because it requires credit Card or payment in advance.
    Anything more I can do ?
    Here is the Output of Toshiba PC Diagnostic:
    Date 2013/05/08 09:27:25
    [PC Information]
    Model Name TECRA R950
    Part Number PT534E-00E00CGR
    Serial Number XC064089H
    OS Version Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
    BIOS Version Version 2.20
    CPU Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
    Physical Memory 4096MB RAM
    Hard Disk Capacity 320,070,320,640 [Byte] 298.089 [GB]
    Video Intel(R) HD Graphics 4000 version=9.17.10.2884
    Screen Resolution 1366 x 768 Pixels
    Network Intel(R) 82579V Gigabit Network Connection version= MAC Address=E8:E0:B7:B2:7A:66
    Modem None
    IDE Device 1 Hitachi HTS543232A7A384 FW version=ES2O
    IDE Device 2 MAT****A DVD-RAM UJ8B2
    Internet Explorer 9.10.9200.16540
    PS-MICOM Version ""
    [QFE Information]
    CPU TEST DONE PASS
    NETWORK TEST (1) DONE PASS (Intel(R) 82579V Gigabit Network Connection)
    Host Controller - 1E2D)
    USB TEST (7) DONE PASS (Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26)
    USB TEST (8) DONE PASS (USB-Root-Hub)
    USB TEST (9) DONE PASS (Generic USB Hub)
    CD/DVD DRIVE TEST (F:\) SKIP -

    Hi
    The notebook supports the Atheros b/g/n WB225 WLan card including the BT functionality.
    The Atheros driver from the Toshiba EU driver page should be compatible:
    [Wireless Lan Driver v 9.2.0.489|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=241&selProduct=7562&selSh ortMod=3563&language=13&selOS=30&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=5&ID=82924&OSI D=30&driverLanguage=42]
    You have to pay attention to the BT function you have to install WLan driver, then Atheros BT filter package and then the Toshiba BT stack in order to get the BT and Wlan working.

  • Satellite C660 - Re-installed WLAN driver not working

    Hi
    I cleared a lot of unused programs from a Toshiba Satellite C660-1JH, and accidently removed the Realtek WLAN Driver.
    The laptop obviously now has no internal wireless connection. When I realised I managed to find the driver online, successfully downloaded and installed it. I restarted the computer in order for the changes to take affect but nothing happened.
    I removed the driver and all associated files and then took it from another site to check that there wasn't anything wrong with the contents of the file. I got exactly the same result twice more. I've been checking the uninstall program list each time to make sure the driver does exist.
    My question is does anyone know if there's something else I need to do after installing the WLAN driver to enable it to operate, or if there's another decent internal wireless adaptor I can download from the web that works with this model.
    Apologies for my vague I.T knowledge, hope somebody can help!
    Thanks

    On this virtual way it is not easy to say what is wrong there.
    Fact is that your notebook has Realtek RTL8188CE WLAN card inside.
    Dont search the driver Googling around. Right driver you can download from Toshiba WLAN portal http://aps2.toshiba-tro.de/wlan/
    Install it, check status in device manager, try to enable WLAN card using FN key combination and send some feedback.
    Driver offered on WLAN portal is the same that you got with original preinstalled recovery image (WIN7 64BIT HOME PREMIUM).

  • WLAN N95 Not Working

    Hi i have had this problem ever since i got the phone. i got the phone 2 weeks back on a contract with Vodafone.
    So my problem is i cannot connect to my WLAN well i don't know if it connects or not because when i try to browse it asks me which access point i wanna use i choose my access point and then the browser starts up but nothing shows up the status bar very slowly starts moving but nothing happens... i wonder if this is my N95s problem or my routers... i use my ps3 to connect to my router it works fine... also my NDS.. and PSP.. they all connect just fine using WLAN its just N95 that has a problem with it my Router is a DG834N and i have the router set to g&b and my security is off all it needs is mac authorisation which i have done. so could some one please tell me whats going on with the phone??.. thank you.

    Don't worry i got my own answer its problems with N95s i see i should have gone through all the topics before posting my problems i see that there are many people with same problem.

  • WLAN anchoring not working for BYOD and ISE?

    Anyone set up 802.1x authenication (Radius/ISE) in lieu with wlan anchoring and got it working?
    Looking in the docs doesn't give much clues why this fails, but web-auth and achoring works excellent on another wlan.
    We need to move all BYOD devices to the datacenter for termination, so using anchoring would solve all our needs.
    And yes, all interfaces and security settings are identical on all wlc's. The s/w is 7.0.116 and all controllers are 5508's
    Isn't 802.1x and anchoring supported?
    BTW - looking on the debug outputs it seems that the remote controllers do initiate radius auth instead of the anchor controller.
    Any ideas?
    Sincere Regards
    /Mats

    I was hoping that I did't have to open a TAC case regarding this issue.
    Since the setup is very simple - a SSID with wpa2/aes and 802.1x and tied to a interface present and active an well as specific radius server for auth on both remote and anchor controller. The tunnel is up between remote and anchor. The anchor also terminates an SSID with web auth that works fine. Why doesn't this work?
    Best Regards
    Mats Nilson

  • Iwlwifi-3945-ucode -- iwlist scan and Wlan LED not working

    I am using the iwlwifi-3945-ucode driver to access wireless networks. I can connect to my WPA encrypted wireless LAN using netcfg; however, I cannot scan for any wireless networks around me using 'iwlist scan' or 'iwlist wlan0 scan'. It yields 'no scan results'. 'iwlist scanning' results in one entry showing me the wireless LAN I am connected to.
    How can I get iwlist scan to work?
    Also, I would like to get a feedback from the wireless LED of my notebook (Thinkpad X60s) telling me if there is anything going on with it.... I used to use thinkpad_acpi earlier, but this doesn't seem to help anymore (not sure if thinkpad_acpi was actually providing this option).
    Any ideas how to enable it?
    I would really appreciate any help!

    shining wrote:
    Stalafin wrote:
    I am using the iwlwifi-3945-ucode driver to access wireless networks. I can connect to my WPA encrypted wireless LAN using netcfg; however, I cannot scan for any wireless networks around me using 'iwlist scan' or 'iwlist wlan0 scan'. It yields 'no scan results'. 'iwlist scanning' results in one entry showing me the wireless LAN I am connected to.
    How can I get iwlist scan to work?
    Maybe try as root.
    Yeah, root does the trick. Has been changed then, hasn't it? Don't remember to have used root for that one, ever.
    shining wrote:
    Also, I would like to get a feedback from the wireless LED of my notebook (Thinkpad X60s) telling me if there is anything going on with it.... I used to use thinkpad_acpi earlier, but this doesn't seem to help anymore (not sure if thinkpad_acpi was actually providing this option).
    Any ideas how to enable it?
    I think you have to wait for 2.6.26, but it should not be too far away.
    They have taken that one out? See, I had it working about one month ago. Then I decided to set up Arch anew (like two weeks ago, followed by note turning the notebook on for about another week), and now there isn't happening anything. So since the new setup it doesn't work. I am just figuring if I have to modprobe something. Gonna restart now... maybe it helps.

  • Realtek rtl8187b Wlan does not work on Satellite L300D-10Q

    Every time I turn my laptop off next time I turn it on it will not connect to my router. I have to remove the driver and then reinstall the hardware. Can anyone help?

    Done both and no firewall being used. It works the first time but then after you close the laptop and reopen it, it finds the router but only local connection.
    Have to unistall and then find new hardware for it work again.

  • Satellite M70-394: WLan does not work after wake up from standby

    Hi all....
    I have a problem with my WLan connection and hope one of you may be able to help. Starting my computer from off there isn't a problem with the WIFI connection but if I put the computer into standby by closing the lid and then restarting it from there the light comes on briefly for wi fi but then goes off and the only way I can connect is through a cable.
    Any suggestions would be gratefully appreciated.

    Hi
    I have read in the forum that some similar "Wlan standby" issues were fixed by BIOS update.
    I think you should compare the BIOS version on the notebook with the BIOS which is available on the website. If there is a new update try to upgrade it
    Be sure that you have chosen the right BIOS.

  • I-mate WLAN connection not working

    My connection was perfect before setting network key to my SMC router (SMC7904WBRA2). But after setting the key, I could connect my laptop, but not my i-mate PDA2. I can't remove the key also as I don't have the password to login to 192.168.2.1.  I afraid, I may not configure the ADSL connectivity again, if I reset the password (as suggested in this forum).
    Can anyone help me in this regard? (I am not a network savvy person).
    Thanks

    I think reset is the only way. Find information first how to setup router with your ISP, and then reset it, for quicker recovery.

Maybe you are looking for